Explanatory Memorandum to COM(1995)310 - Minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres - Main contents
Please note
This page contains a limited version of this dossier in the EU Monitor.
| dossier | COM(1995)310 - Minimum requirements for improving the safety and health protection of workers potentially at risk from explosive ... |
|---|---|
| source | COM(1995)310  |
| date | 18-09-1995 |
|
51995PC0310
Proposal for a COUNCIL DIRECTIVE on minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres /* COM/95/310 FINAL - SYN 95/0235 */
Official Journal C 332 , 09/12/1995 P. 0010
Proposal for a Council Directive on minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres (95/C 332/06) (Text with EEA relevance) COM(95) 310 final - 95/0235(SYN)
(Submitted by the Commission on 18 September 1995)
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty establishing the European Community, and in particular Article 118a thereof,
Having regard to the Commission proposal submitted after consultation with the Advisory Committee on Safety, Hygiene and Health Protection at Work and the Safety and Health Commission for the Mining and Other Extractive Industries,
In cooperation with the European Parliament,
Having regard to the opinion of the Economic and Social Committee,
Whereas Article 118a of the Treaty provides that the Council shall adopt, by means of directives, minimum requirements designed to encourage improvements, especially in the working environment, as regards the health and safety of workers;
Whereas, under the terms of that Article, those directives are to avoid imposing administrative, financial and legal constraints in a way which would hold back the creation and development of small and medium-sized undertakings;
Whereas the improvement of occupational safety, hygiene and health is an objective which should not be subordinated to purely economic considerations;
Whereas compliance with the minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres is essential to ensure worker's safety and health protection;
Whereas this Directive is an individual directive within the meaning of Article 16 (1) of Council Directive 89/391/EEC of 12 June 1989 on the introduction of measures to encourage improvements in the safety and health of workers at work (1), whereas therefore, the provisions of the said Directive are also fully applicable to cases in which workers are potentially at risk from explosive atmospheres without prejudice to more restrictive or specific provisions contained in this Directive;
Whereas this Directive constitutes a practical step towards the achievement of the social dimension of the internal market;
Whereas the recitals to Parliament and Council Directive 94/9/EC of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres (2) state that it is intended to prepare an additional directive based on Article 118a covering, in particular, explosion hazards which derive from a given use and/or types and methods of installation of equipment;
Whereas explosion protection is of particular importance to safety; whereas explosions endanger the lives and health of workers as a result of the uncontrolled effects of flame and pressure, the presence of noxious reaction products and consumption of the oxygen in the ambient air which workers need to breathe;
Whereas explosions are characterized by the extreme rapidity with which they occur and the danger of propagation within interlinked installations; whereas manual intervention after an ignition is normally impossible; whereas, therefore, the minimum requirements for improving the safety and health protection of workers at risk from explosive atmospheres place special emphasis on the need for analysis to forecast the potential danger and the need for all necessary protective measures to be included right from the planning stage;
Whereas the large number of potential explosion risks necessitates an overall assessment of places of work, in the context of which it becomes increasingly important, in line with technical development, to take account of logical (software) malfunctions in automatically controlled processes;
Whereas the organizational aspects of explosion protection must be adapted to the technical problems occurring at places of work so that no weaknesses arise in the explosion protection arrangements; whereas Directive 89/391/EEC requires the employer to be in possession of an assessment of the risks to workers' safety and health at work; whereas this requirement is to be regarded as being amplified by the present Directive in that it provides that the employer shall draw up an explosion protection document and keep it up to date; whereas this explosion protection document may be part of the assessment of the risks to safety and health at work required by Article 9 (1) (a) of Directive 89/391/EEC; whereas the explosion protection document must contain the necessary measures for the safety and health protection of workers potentially at risk from explosive atmospheres;
Whereas an assessment of explosion risks may be required under other Community legislation; whereas, in order to avoid unnecessary duplication of work, the employer should be allowed, in accordance with national practice, to combine documents, parts of documents or other equivalent reports produced in response to other legislation to form a single 'safety report`;
Whereas preventive measures must be supplemented if necessary by additional measures which become effective when ignition has taken place; whereas maximum safety can be achieved only by combining preventive and supplementary measures and taking account of operational conditions and the necessary maintenance;
Whereas the prevention of explosive atmospheres as a general rule has priority; whereas in cases in which this is not possible in the current state of the art the ignition of explosive atmospheres must be prevented and the effects of any explosion kept within acceptable limits; whereas employers have a duty to make provision for all necessary safety measures and systems;
Whereas Directive 94/9/EC, which applies without restriction from 1 July 2003, divides the equipment and protective systems which it covers into equipment groups and categories; whereas the present Directive provides for a classification of the places where explosive atmospheres may occur in terms of zones; whereas this classification is to be carried out by the employer and relates to the place of use;
Whereas the requirements formulated in this Directive may not be adequate in all cases to prevent danger from hazards due to explosive mixtures under conditions other than atmospheric conditions or with co-reactants other than air, so that further measures are required;
Whereas the scope of this Directive does not include medical facilities used directly for the treatment of patients, where particular importance attaches to the protection of patients in addition to workers' safety and health protection; whereas in such places the minimum requirements laid down in this Directive may not be sufficient in all cases;
Whereas the scope of this Directive does not include the normal use of appliances burning gaseous fuels, since Council Directive 90/396/EEC of 29 June 1990 on the approximation of the laws of the Member States relating to appliances burning gaseous fuels (3) contains essential requirements concerning the placing on the market and bringing into service of such appliances, which are applicable both to the appliances themselves and to their installation, so as to ensure that the safety of persons, domestic animals and property is not compromised;
Whereas the scope of this Directive does not encompass handling of explosives and chemically unstable substances, since its requirements may not be sufficient in all cases and special measures may therefore be necessary;
Whereas the scope of this Directive does not encompass the mineral-extracting industries as defined in Council Directives 92/91/EEC (4) and 92/104/EEC (5), which relate to the protection of workers in these industries and already cover the question of explosion protection; whereas the minimum requirements laid down in those Directives are stricter than those in the present Directive on account of the greater potential hazard in the mineral-extracting industries;
Whereas the scope of this Directive does not encompass the use of means of transport, including sea-going vessels, on which the pertinent provisions of the international agreements (ADR, IMO, etc.) apply, since these already ensure protection of workers,
HAS ADOPTED THIS DIRECTIVE:
Contents
- SECTION I GENERAL PROVISIONS
- Article 2
- SECTION II OBLIGATIONS OF THE EMPLOYER
- Article 4
- Article 5
- Article 6
- Article 7
- Article 8
- Article 9
- SECTION III MISCELLANEOUS PROVISIONS
- Article 11
- Article 12
- Article 13
- ANNEX I
- 1. Preliminary note
- 2. Places where explosive atmospheres may occur
- 3. Classification of hazardous places
- Zone 0
- Zone 1
- Zone 2
- Zone 20
- Zone 21
- Zone 22
- ANNEX II
- 1. Organizational measures
- 1.1. Competent workers
- 1.2. Written instructions and permits to work
- 1.3. Regular review of safety and health measures
- 2. Assessment of explosion risks
- 2.3. Explosion risks shall be assessed overall
- 3. Planning principles
- 4. Explosion protection measures
- B. CRITERIA FOR THE SELECTION OF WORK EQUIPMENT AND INSTALLATION MATERIALS
- Zone 0
- Zone 1
- Zone 2
- Zone 20
- Zone 21
- Zone 22
- ANNEX III
- Beware explosive atmospheres!
- ANNEX IV
- Zone 0
- Zone 1
- Zone 2
- Zone 20
- Zone 21
- Zone 22
- ANNEX V
Article 1
Subject
1. This Directive, which is the . . . individual directive within the meaning of Article 16 (1) of Directive 89/391/EEC, lays down minimum requirements for the safety and health protection of workers potentially at risk from explosive atmospheres as defined in Article 2.
2. This Directive does not apply to:
(a) medical facilities used directly for the treatment of patients;
(b) normal use of appliances burning gaseous fuels as defined in Council Directive 90/396/EEC (6);
(c) manufacture, handling, storage and transport of explosives or chemically unstable substances;
(d) establishments of the mineral-extracting industries covered by Directive 92/91/EEC or Directive 92/104/EEC;
(e) use of means of transport, including sea-going vessels, on which the pertinent provisions of the international agreements (ADR, IMO, etc.) apply.
3. The provisions of Directive 89/391/EEC and the pertinent individual directives are fully applicable to the domain referred to in paragraph 1, without prejudice to more restrictive and/or specific provisions contained in this Directive.
Definition
For the purposes of this Directive, an explosive atmosphere shall be a mixture with air, under atmospheric conditions, of flammable substances in the form of gases, vapours, mists or dusts in which, after ignition has occurred, combustion spreads to the entire unburned mixture.
Article 3
Principles for the prevention of and protection against explosions
With a view to preventing and providing protection against explosions, the employer shall take technical and/or organizational measures appropriate to the nature of the operation, in accordance with the following basic principles, in order to:
- prevent the formation of explosive atmospheres,
- prevent the ignition of explosive atmospheres,
- reduce the effects of an explosion in such a way that workers are not at risk.
General obligations
1. To ensure the safety and health of workers, and in accordance with the basic principles laid down in Article 3, the employer shall take the necessary measures so that:
- where explosive atmospheres may arise in such quantities as to endanger the safety and health of workers, the working environment is such, given the appropriate measures, that workers can perform the work assigned to them without danger to their safety and health or to the safety and health of others,
- responsible supervision is ensured during the presence of workers in working environments where explosive atmospheres may arise in such quantities as to endanger the safety and health of workers,
- work during which workers may be at risk from explosive atmospheres is carried out only by competent persons or under their supervision,
- where necessary, workers wear only working clothes or personal protective equipment suitable for use in places where explosive atmospheres may arise in such quantities as to endanger the safety and health of workers.
2. Without prejudice to Council Directives 89/654/EEC (7), 89/655/EEC (8) and 92/57/EEC (9), the employer shall ensure:
- in accordance with the principle of overall assessment of the place of work, that work equipment and all installation materials are suitable for use in places where explosive atmospheres may arise and are so erected, installed and assembled that they do not give rise to an explosion risk,
- that the measures required under Article 3 are combined or supplemented as necessary and that the necessary measures against the propagation of explosions are taken,
- where necessary, that appropriate emergency routes are indicated and escape and rescue facilities are provided and maintained to ensure that workers can leave endangered places promptly and safely in the event of danger.
3. Following an appropriate health and safety policy, the employer shall ensure that a health and safety plan for explosion protection measures, hereinafter referred to as the 'explosion protection document`, satisfying the pertinent requirements of Articles 6, 9 and 10 of Directive 89/391/EEC, is drawn up and kept up to date.
The explosion protection document shall demonstrate in particular:
- that the explosion risks incurred by the workers have been determined and assessed,
- that adequate measures will be taken to attain the aims of this Directive,
- that the workplace and work equipment including warning devices are designed, operated and maintained with due regard for safety,
- that, in accordance with Directive 89/655/EEC, arrangements have been made for the safe use of work equipment.
The explosion protection document shall be drawn up prior to the commencement of work and be revised if the working environment, in particular the workplace, work equipment or organization of the work, has undergone significant changes, extensions or conversions.
4. Where workers from several undertakings are present at the same workplace, each employer shall be responsible for all matters under his control.
The employer responsible for the workplace in accordance with national law and/or practice shall coordinate the implementation of all the measures concerning workers' safety and health and shall state, in his explosion protection document, the aim of that coordination and the measures and procedures for implementing it.
The coordination shall not affect the responsibility of the individual employers as provided for in Directive 89/391/EEC.
Places containing explosive atmospheres
1. The employer shall specify in the explosion protection document the places to which the minimum requirements laid down in Annex II apply.
He shall classify places where explosive atmospheres may occur in accordance with Annex I.
2. In respect of the places covered by paragraph 1, the employer shall ensure compliance with the relevant provisions of the minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres as laid down in Annex II.
Annex IV provides guidance on the performance of work in the various zones.
3. Where necessary, places where explosive atmospheres may arise in such quantities as to endanger the safety and health of workers shall be marked with signs at the points of entry to them, in accordance with Annex III.
Worker information
Without prejudice to Article 10 of Directive 89/391/EEC, workers and/or their representatives shall be informed of all measures to be taken concerning safety and health at work, in particular those taken in pursuance of Articles 3 to 5 of this Directive.
Consultation and participation of workers
Consultation and participation of workers and/or of their representatives shall take place in accordance with Article 11 of Directive 89/391/EEC on all matters covered by this Directive.
Training of workers
Without prejudice to Article 12 of Directive 89/391/EEC, the employer shall take the necessary steps to ensure that workers potentially at risk from explosive atmospheres receive appropriate training, in particular pursuant to Articles 3 to 5 of this Directive.
Special requirements for work equipment and workplaces
1. Work equipment for use in places where explosive atmospheres may occur which is made available in the undertaking or establishment for the first time after the entry into force of this Directive and up to 30 June 2003 shall comply with the minimum requirements laid down in Annex II A, if no other Community directive is applicable or is so only partially.
2. Work equipment for use in places where explosive atmospheres may occur which is made available in the undertaking or establishment for the first time after 30 June 2003 shall comply with the minimum requirements laid down in Annex II A and B.
3. Workplaces which contain places where explosive atmospheres may occur and which are used for the first time after the entry into force of this Directive shall comply with its minimum requirements.
4. Where work equipment and workplaces which contain places where explosive atmospheres may occur are already in use before the entry into force of this Directive, they shall comply with its minimum requirements no later than three years after its entry into force.
5. If, after this Directive enters into force, any modification, extension or restructuring is undertaken in workplaces containing places where explosive atmospheres may occur, the employer shall take the necessary steps to ensure that these comply with this Directive's minimum requirements.
Article 10
Adjustments to the Annexes
Purely technical adjustments to the Annexes of this Directive made necessary by:
- the adoption of directives on technical harmonization and standardization in the field of explosion protection, and/or
- technical progress, changes in international regulations or specifications, and new findings on the prevention of and protection against explosions
shall be adopted in accordance with the procedure laid down in Article 17 of Directive 89/391/EEC.
Vade-mecum
A vade-mecum shall be drawn up in agreement with the Council, describing some possible ways of complying with the minimum requirements contained in this Directive. Modifications and supplements to the vade-mecum shall be adopted in accordance with the procedure laid down in Article 17 of Directive 89/391/EEC.
Final provisions
1. Member States shall bring into force the laws, regulations and administrative provisions necessary to comply with this Directive not later than 31 December 1997. They shall forthwith inform the Commission thereof.
When Member States adopt these provisions, these shall contain a reference to this Directive or shall be accompanied by such reference at the time of their official publication. The procedure for such reference shall be adopted by the Member States.
2. Member States shall communicate to the Commission the texts of the provisions of national law which they have already adopted or adopt in the field governed by this Directive.
3. Member States shall report to the Commission every five years on the practical implementation of the provisions of this Directive, indicating the points of view of employers and workers.
The Commission shall inform the European Parliament, the Council, the Economic and Social Committee and the Advisory Committee on Safety, Hygiene and Health Protection at Work.
This Directive is addressed to the Member States.
OJ No L 183, 29. 6. 1989, p. 1.
OJ No L 100, 19. 4. 1994, p. 1.
OJ No L 196, 26. 7. 1990, p. 15.
OJ No L 348, 28. 11. 1992, p. 9.
OJ No L 404, 31. 12. 1992, p. 10.
OJ No L 196, 26. 7. 1990, p. 15.
OJ No L 393, 30. 12. 1989, p. 1.
OJ No L 393, 30. 12. 1989, p. 13.
OJ No L 245, 26. 8. 1992, p. 6.
CLASSIFICATION OF PLACES WHERE EXPLOSIVE ATMOSPHERES MAY OCCUR
The following system of classification shall be applied to places where, as a result of local and operational conditions, an explosive atmosphere may occur in such quantities as to require precautions to be taken in accordance with Articles 3 to 5 of this Directive.
A place in which an explosive atmosphere may occur in such quantities as to require special precautions to protect the health and safety of the workers concerned shall be regarded as hazardous within the meaning of this Directive.
A place in which an explosive atmosphere is not expected to occur in such quantities as to require special precautions shall be regarded as non-hazardous within the meaning of this Directive.
Flammable substances shall be classified as materials which may form an explosive atmosphere unless an investigation of their properties has shown that in mixtures with air they are incapable of independently propagating an explosion.
Hazardous places shall be classified in terms of zones on the basis of the frequency and duration of the occurrence of an explosive atmosphere and the assessment of the anticipated effects.
The extent of the measures to be taken in accordance with Annex II A is determined by this classification. The guide criteria for performance of work in the various zones (Annex IV) provide useful information which may be an aid to practical application.
A place in which an explosive atmosphere consisting of a mixture with air of flammable substances in the form of gas, vapour or mist is present continously or for long periods or frequently.
A place in which an explosive atmosphere consisting of a mixture with air of flammable substances in the form of gas, vapour or mist is likely to occur occasionally.
A place in which an explosive atmosphere consisting of a mixture with air of flammable substances in the form of gas, vapour or mist is not likely to occur or, if it does occur, will persist for a short period only.
A place in which an explosive atmosphere in the form of a cloud of combustible dust in air is present continously, for long periods or frequently and in which deposits of combustible dust of unknown or excessive thickness may be formed. (Dust deposits alone are not grounds for classification as Zone 20).
A place in which an explosive atmosphere in the form of a cloud of combustible dust in air can occasionally occur and in which deposits or layers of combustible dust can generally be present.
A place in which an explosive atmosphere in the form of a cloud of combustible dust in air is not likely to occur or in which accumulations or layers of combustible dust are present.
A. MINIMUM REQUIREMENTS FOR IMPROVING THE SAFETY AND HEALTH PROTECTION OF WORKERS POTENTIALLY AT RISK FROM EXPLOSIVE ATMOSPHERES
Preliminary note
The obligations laid down in this Annex apply:
- whenever required by the features of workplaces, workstations, the equipment or substances used or the dangers caused by the activity in question as a result of explosive atmospheres,
- to equipment in non-hazardous places which is required for, or helps to ensure, the safe operation of equipment located in hazardous places.
For any workplace, there shall be available a sufficient number of workers with the requisite skills, experience and training to perform the explosion protection tasks assigned to them.
Where required by the explosion protection document:
- written instructions specifying the rules to be observed shall be issued for every workplace, taking into account the size of the operation and nature of activities,
- a system of permits to work shall be applied for carrying out both hazardous activities and activities which may interact with other work to cause hazards.
Permits to work shall be issued by a person with responsibility for this function prior to the commencement of work.
The employer shall ensure that the measures taken to protect the safety and health of the workers are reviewed regularly, at least once per year, to ensure compliance with this Directive.
2.1. Any assessment of explosion risks shall be based on:
- the likelihood that explosive atmospheres will occur and their persistence,
- the likelihood that ignition sources will be present and become effective,
- the scale of the anticipated effects.
2.2. Ignitability shall be assessed by taking into account, in particular:
- the possible degree of dispersal of flammable substances,
- the possible concentration of flammable substances in air within their explosion limits.
The following are of particular importance:
- installations,
- substances used,
- processes,
- possible interaction, including interaction with the working environment.
2.4. Working areas which are or can be connected via openings to places in which explosive atmospheres may occur shall be taken into account in assessing explosion risks.
3.1. When planning new installations or the modification of existing ones, attention shall be paid, in particular, to:
- normal operating conditions, including maintenance work,
- constructional factors,
- commissioning and decomissioning,
- malfunctions, foreseeable fault conditions,
- misuse which may reasonably be anticipated.
It shall also be ascertained as part of this process whether:
- flammable substances can be replaced by others which cannot form explosive mixtures,
- all types of connecting and coupling devices can be avoided in places in which explosive atmospheres may occur.
3.2. If the explosion protection document indicates that hazards to workers or the working environment cannot be ruled out, suitable measures and protective systems shall be introduced to combat such hazards.
3.3. If the likelihood of an ignition source becoming effective cannot be assessed, the ignition source shall be regarded as being effective at all times, and protective measures selected accordingly.
4.1. If an explosive atmosphere contains several types of flammable gases, vapours, mists or dusts, protective measures shall be appropriate to the greatest potential hazard.
4.2. Prevention of ignition hazards in accordance with Article 3 shall also take account of electrostatic discharges, where workers or the working environment act as the charge carrier or charge producer.
4.3. Suitable precautions shall be taken to prevent propagation of explosions by dangerous chain reactions.
4.4. Work equipment and associated connecting devices shall be so assembled that they do not give rise to an explosion hazard. They may be brought into service only if the explosion protection document shows that their operation will not involve an explosion hazard. This applies also to work equipment and associated connecting devices which are not regarded as equipment or protective systems within the meaning of Directive 94/9/EC if their incorporation into an installation can in itself give rise to an ignition hazard.
Suitable precautions shall be taken to prevent confusion between connecting devices.
4.5. If the way in which portable appliances are used is such that they may be operated in places with different degrees of potential danger, appropriate organizational measures shall be taken to ensure safe operation; otherwise such appliances shall be selected on the basis of the most unfavourable conditions of use.
4.6. It shall be ensured that only those measuring instruments for recording explosive atmospheres are used which offer the reliability and accuracy appropriate to the actual conditions of use.
4.7. Before explosion conditions are reached, it shall still be possible for the necessary explosion protection measures to be carried out in safety. Workers shall be given optical and/or acoustic warnings and, where necessary, withdrawn.
4.8. Protection systems providing explosion pressure relief shall safely divert the explosion pressure and any substances released.
4.9. Any gases released which may give rise to explosion hazards shall be suitably evacuated.
4.10. Deposits of explosible dust outside the workplace shall be removed or rendered harmless.
4.11. Where additional risks may arise if the power supply to equipment and protective systems is interrupted, it shall be possible to maintain them in a safe state of operation independently of the rest of the installation.
4.12. Manual override shall be possible in order to shut down the equipment and protective systems incorporated within automatic processes which deviate from the intended operating conditions.
Only competent persons may take such action.
4.13. When the emergency shutdown is actuated, accumulated energy shall be dissipated or insulated as quickly and as safely as possible so that it no longer constitutes a hazard.
This does not apply to electrochemically-stored energy.
4.14. Before a workplace containing places where explosive atmospheres may occur is used for the first time, its overall explosion safety shall be checked.
The requisite conditions for ensuring explosion protection shall be maintained.
4.15. Such checks shall be carried out by persons who possess particular expertise in the field of explosion protection as a result of their professional training, experience and current job.
Such persons shall be recognized and/or appointed for carrying out checks in a specific field in accordance with national legislation and/or practice.
If the explosion protection document based on a risk assessment does not state otherwise, work equipment and installation materials for all places in which explosive atmospheres may occur shall be selected on the basis of the categories set out in Directive 94/9/EC:
In Zone 0, Category I equipment shall be used which is intended for use in areas in which explosive atmospheres caused by mixtures of air and gases, vapours or mists are present continuously, for long periods or frequently.
In Zone 1, Category 2 equipment shall be used which is intended for use in areas in which explosive atmospheres caused by gases, vapours or mists are likely to occur occasionally. Equipment suitable for use in Zone 0 may also be used.
In Zone 2, Category 3 equipment shall be used which is intended for use in areas in which explosive atmospheres caused by gases, vapours or mists are unlikely to occur or, if they do, are likely to do so only infrequently and for a short period only. Equipment suitable for use in Zones 0 or 1 may also be used.
In Zone 20, Category 1 equipment shall be used which is intended for use in areas in which explosive atmospheres caused by air/dust mixtures are present continuously, for long periods or frequently.
In Zone 21, Category 2 equipment shall be used which is intended for use in areas in which explosive atmospheres caused by air/dust mixtures are likely to occur occasionally. Equipment suitable for use in Zone 20 may also be used.
In Zone 22, Category 3 equipment shall be used which is intended for use in areas in which explosive atmospheres caused by dust raised into the air are unlikely to occur or, if they do, are likely to do so only infrequently and for a short period only. Equipment suitable for use in Zones 20 or 21 may also be used.
In accordance with Directive 89/655/EEC, the employer shall ensure that the equipment and installation materials used are suitable for the actual operating and service conditions. Where appropriate, this also applies to working clothes and personal protective equipment.
Warning sign for places where explosive atmospheres may occur, pursuant to Article 5 (3)
>REFERENCE TO A FILM>
- Distinctive features:
- triangular shape,
- black pictogram on a yellow background with black edging (the yellow part to take up at least 50 % of the area of the sign).
GUIDE CRITERIA FOR PERFORMANCE OF WORK
Installations are considered to be in normal operation when they are performing their intended function within their design parameters.
The presence of workers and performance of work are as a general rule not permissible.
Ignition sources which may become effective during normal operation and even in infrequently occurring cases of malfunction must be avoided.
The performance of work during which ignition sources may occur during normal operation is permissible only if the precautions for this zone set out in the explosion protection document are applied.
Ignition sources which may become effective during normal operation and in foreseeable cases of malfunction must be avoided.
The performance of work during which ignition sources may occur during normal operation is permissible only if the precautions for this zone set out in the explosion protection document are applied.
Ignition sources which may become effective during normal operation must be avoided.
The presence of workers and performance of work are as a general rule not permissible.
Ignition sources which may become effective during normal operation and even in infrequently occurring cases of malfunction must be avoided.
The performance of work during which ignition sources may occur during normal operation is permissible only if the precautions for this zone set out in the explosion protection document are applied.
Ignition sources which may become effective during normal operation and in foreseeable cases of malfunction must be avoided.
The performance of work during which ignition sources may occur during normal operation is permissible only if the precautions for this zone set out in the explosion protection document are applied.
Ignition sources which may become effective during normal operation must be avoided.
NON-EXHAUSTIVE LIST OF SUBJECTS SUPPLEMENTING THE MINIMUM REQUIREMENTS OF THIS DIRECTIVE AND COVERED BY THE VADE-MECUM REFERRED TO IN ARTICLE 10
- Layout and contents of the explosion protection document (see Article 4 (3))
- Organizational measures (see Annex II A, Section 1)
- Assessment of explosion risks (see Annex II A, Section 2)
- Planning principles (see Annex II A, Section 3)
- Explosion protection measures (see Annex II, Section 4)
- Instructions for the zoning of hazardous places (see Annex I)
- Information on pertinent standards relating to work equipment