Annexes to COM(2015)282 - Application of the arrangements for products from certain ACP states provided for in agreements establishing Economic Partnership Agreements (recast)

Please note

This page contains a limited version of this dossier in the EU Monitor.

agreements establishing, or leading to the establishment of, Economic Partnership Agreements (OJ L 348, 31.12.2007, p. 1).

(4) See Annex III.

(5) OJ L 317, 15.12.2000, p. 3.

(6) OJ L 311, 4.12.1999, p. 3.

(7) Council Regulation (EC) No 515/97 of 13 March 1997 on mutual assistance between the administrative authorities of the Member States and cooperation between the latter and the Commission to ensure the correct application of the law on customs and agricultural matters (OJ L 82, 22.3.1997, p. 1).

(8) OJ L 123, 12.5.2016, p. 1.

(9) Regulation (EU) No 527/2013 of the European Parliament and of the Council of 21 May 2013 amending Council Regulation (EC) No 1528/2007 as regards the exclusion of a number of countries from the list of regions or states which have concluded negotiations (OJ L 165, 18.6.2013, p. 59).

(10) Regulation (EU) No 182/2011 of the European Parliament and of the Council of 16 February 2011 laying down the rules and general principles concerning mechanisms for control by Member States of the Commission's exercise of implementing powers (OJ L 55, 28.2.2011, p. 13).

(11) Regulation (EU) 2015/478 of the European Parliament and of the Council of 11 March 2015 on common rules for imports (OJ L 83, 27.3.2015, p. 16).

(12) Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Code (OJ L 269, 10.10.2013, p. 1).

(13) Regulation (EU) No 1308/2013 of the European Parliament and of the Council of 17 December 2013 establishing a common organisation of the markets in agricultural products and repealing Council Regulations (EEC) No 922/72, (EEC) No 234/79, (EC) No 1037/2001 and (EC) No 1234/2007 (OJ L 347, 20.12.2013, p. 671).

(14) Council Regulation (EC) No 1225/2009 of 30 November 2009 on protection against dumped imports from countries not members of the European Community (OJ L 343, 22.12.2009, p. 51).



ANNEX I

LIST OF REGIONS OR STATES WHICH HAVE CONCLUDED NEGOTIATIONS WITHIN THE MEANING OF ARTICLE 2(2)

ANTIGUA AND BARBUDA

THE COMMONWEALTH OF THE BAHAMAS

BARBADOS

BELIZE

THE REPUBLIC OF BOTSWANA

THE REPUBLIC OF CAMEROON

THE REPUBLIC OF CÔTE D'IVOIRE

THE COMMONWEALTH OF DOMINICA

THE DOMINICAN REPUBLIC

THE REPUBLIC OF FIJI

THE REPUBLIC OF GHANA

GRENADA

THE COOPERATIVE REPUBLIC OF GUYANA

JAMAICA

THE REPUBLIC OF KENYA

THE REPUBLIC OF MADAGASCAR

THE REPUBLIC OF MAURITIUS

THE REPUBLIC OF NAMIBIA

THE INDEPENDENT STATE OF PAPUA NEW GUINEA

FEDERATION OF SAINT KITTS AND NEVIS

SAINT LUCIA

SAINT VINCENT AND THE GRENADINES

THE REPUBLIC OF SEYCHELLES

THE REPUBLIC OF SURINAME

THE KINGDOM OF SWAZILAND

THE REPUBLIC OF TRINIDAD AND TOBAGO

THE REPUBLIC OF ZIMBABWE



ANNEX II

Rules of origin

CONCERNING THE DEFINITION OF THE CONCEPT OF ‘ORIGINATING PRODUCTS’ AND METHODS OF ADMINISTRATIVE COOPERATION

TITLE I:General Provisions

Articles

1.Definitions

TITLE II:Definition of the concept of originating products

Articles

2.General requirements

3.Wholly obtained products

4.Sufficiently worked or processed products

5.Insufficient working or processing operations

6.Cumulation of origin

7.Unit of qualification

8.Accessories, spare parts and tools

9.Sets

10.Neutral elements

TITLE III:Territorial requirements

Articles

11.Principle of territoriality

12.Direct transport

13.Exhibitions

TITLE IV:Proof of origin

Articles

14.General requirements

15.Procedure for the issue of a movement certificate EUR.1

16.Movement certificates EUR.1 issued retrospectively

17.Issue of a duplicate movement certificate EUR.1

18.Issue of movement certificates EUR.1 on the basis of a proof of origin issued or made out previously

19.Conditions for making out an invoice declaration

20.Approved exporter

21.Validity of proof of origin

22.Transit procedure

23.Submission of proof of origin

24.Importation by instalments

25.Exemptions from proof of origin

26.Information procedure for cumulation purposes

27.Supporting documents

28.Preservation of proof of origin and supporting documents

29.Discrepancies and formal errors

30.Amounts expressed in euro

TITLE V:Arrangements for administrative cooperation

Articles

31.Mutual assistance

32.Verification of proofs of origin

33.Verification of suppliers' declarations

34.Penalties

35.Free zones

36.Derogations

TITLE VI:Ceuta and Melilla

Articles

37.Special conditions

TITLE VII:Final provision

Articles

38.Appendices

INDEX

APPENDICES

APPENDIX 1:Introductory notes to the list in Appendix 2

APPENDIX 2:List of working or processing required to be carried out on non-originating materials in order for the product manufactured to acquire originating status

APPENDIX 2A:Derogations from the list of working or processing required to be carried out on non-originating materials in order for the product manufactured to acquire originating status, in accordance with Article 4 of this Annex

APPENDIX 3:Form for movement certificate EUR.1

APPENDIX 4:Invoice declaration

APPENDIX 5A:Supplier declaration for products having preferential origin status

APPENDIX 5B:Supplier declaration for products not having preferential original status

APPENDIX 6:Information certificate

APPENDIX 7:Products to which Article 6(5) of this Annex shall not be applicable

APPENDIX 8:Fishery products to which Article 6(5) of this Annex shall temporarily not be applicable

APPENDIX 9:Neighbouring developing countries

APPENDIX 10:Products for which the cumulation provisions referred to in Article 2(2) and Article 6(1) and (2) of this Annex apply after 1 October 2015 and to which the provisions of Article 6(5), (9) and (12) of this Annex shall not be applicable

APPENDIX 11:Products to which the provisions of Article 6(5), (9) and (12) of this Annex shall not be applicable

APPENDIX 12:Overseas countries and territories

TITLE I

GENERAL PROVISIONS

Article 1

Definitions

For the purposes of this Annex, the following definitions apply:

(a)‘manufacture’ means any kind of working or processing including assembly or specific operations;

(b)‘material’ means any ingredient, raw material, component or part, etc., used in the manufacture of the product;

(c)‘product’ means the product being manufactured, even if it is intended for later use in another manufacturing operation;

(d)‘goods’ means both materials and products;

(e)‘customs value’ means the value as determined in accordance with the Agreement on implementation of Article VII of the GATT 1994 (WTO Agreement on customs valuation);

(f)‘ex-works price’ means the price paid for the product ex works to the manufacturer in whose undertaking the last working or processing is carried out, provided the price includes the value of all the materials used, minus any internal taxes which are, or may be, repaid when the product obtained is exported;

(g)‘value of materials’ means the customs value at the time of importation of the non-originating materials used, or, if this is not known and cannot be ascertained, the first ascertainable price paid for the materials in the territory concerned;

(h)‘value of originating materials’ means the value of such materials as defined in point (g) applied mutatis mutandis;

(i)‘added value’ means the ex-works price minus the customs value of materials imported into either the Union or the ACP States;

(j)‘chapters’ and ‘headings’ mean the chapters and the headings (four-digit codes) used in the nomenclature which makes up the Harmonised Commodity Description and Coding System, referred to in this Annex as ‘the Harmonised System’ or ‘HS’;

(k)‘classified’ refers to the classification of a product or material under a particular heading;

(l)‘consignment’ means products which are either sent simultaneously from one exporter to one consignee or covered by a single transport document covering their shipment from the exporter to the consignee or, in the absence of such a document, by a single invoice;

(m)‘territories’ means territories, including territorial waters;

(n)‘OCT’ means the overseas countries and territories as defined in Appendix 12.

TITLE II

DEFINITION OF THE CONCEPT OF ‘ORIGINATING PRODUCTS’

Article 2

General requirements

1. For the purposes of this Regulation, the following products shall be considered as originating in the ACP States listed in Annex I, hereinafter, for the purpose of this Annex, referred to as ‘ACP States’:

(a)products wholly obtained in the ACP States within the meaning of Article 3 of this Annex;

(b)products obtained in the ACP States incorporating materials which have not been wholly obtained there, provided that such materials have undergone sufficient working or processing in the ACP States within the meaning of Article 4 of this Annex.

2. For the purpose of the implementation of paragraph 1, the territories of the ACP States shall be considered as being one territory.

Originating products made up of materials wholly obtained or sufficiently worked or processed in two or more ACP States shall be considered as products originating in the ACP State where the last working or processing took place, provided the working or processing carried out there goes beyond the operations referred to in Article 5 of this Annex.

3. For products listed in Appendix 10, paragraph 2 shall apply only after 1 October 2015.

Article 3

Wholly obtained products

1. The following shall be considered as wholly obtained in the ACP States or in the Union:

(a)mineral products extracted from their soil or from their seabed;

(b)vegetable products harvested there;

(c)live animals born and raised there;

(d)products from live animals raised there;

(e)products obtained by hunting or fishing conducted there;

(f)products of aquaculture, including mariculture, where the fish are born and raised there;

(g)products of sea fishing and other products taken from the sea outside the territorial waters by their vessels;

(h)products made aboard their factory ships exclusively from products referred to in point (g);

(i)used articles collected there fit only for the recovery of raw materials, including used tyres fit only for retreading or for use as waste;

(j)waste and scrap resulting from manufacturing operations conducted there;

(k)products extracted from marine soil or subsoil outside their territorial waters provided that they have sole rights to work that soil or subsoil;

(l)goods produced there exclusively from the products specified in points (a) to (k).

2. The terms ‘their vessels’ and ‘their factory ships’ in points (g) and (h) of paragraph 1 shall apply only to vessels and factory ships which:

(a)are registered in a Member State or in an ACP State;

(b)fly the flag of a Member State or of an ACP State;

(c)meet one of the following conditions:

(i)they are at least 50 % owned by nationals of the ACP State or of a Member State; or

(ii)they are owned by companies which;

have their head office and their main place of business in the ACP State or in a Member State, and

are at least 50 % owned by the ACP State, public entities of that State or nationals of that State or of a Member State.

3. Notwithstanding paragraph 2, the Union shall, upon request by an ACP State, recognise vessels chartered or leased by the ACP State to undertake fisheries activities in its exclusive economic zone as ‘their vessels’ under the following conditions:

(a)that the ACP State offered the Union the opportunity to negotiate a fisheries agreement and the Union did not accept that offer;

(b)that the charter or lease contract has been accepted by the Commission as providing adequate opportunities for the development of the capacity of the ACP State to fish on its own account and in particular as conferring on the ACP State the responsibility for the nautical and commercial management of the vessel placed at its disposal for a significant period of time.

Article 4

Sufficiently worked or processed products

1. For the purposes of this Annex, products which are not wholly obtained shall be considered to be sufficiently worked or processed in the ACP States or in the Union, when the conditions set out in the list in Appendix 2 or in Appendix 2A are fulfilled. Those conditions indicate, for all products covered by this Regulation, the working or processing which must be carried out on non-originating materials used in manufacturing and apply only in relation to such materials. Accordingly, it follows that if a product, which has acquired originating status by fulfilling the conditions set out in the list is used in the manufacture of another product, the conditions applicable to the product in which it is incorporated do not apply to it, and no account shall be taken of the non-originating materials which may have been used in its manufacture.

2. Notwithstanding paragraph 1, non-originating materials which, according to the conditions set out in Appendices 2 and 2A, should not be used in the manufacture of a given product may nevertheless be used, provided that:

(a)their total value does not exceed 15 % of the ex-works price of the product;

(b)none of the percentages given in the list for the maximum value of non-originating materials are exceeded through the application of this paragraph.

This paragraph shall not apply to products falling within Chapters 50 to 63 of the Harmonised System.

3.
(a)Notwithstanding paragraph 1 and after prior notification of the Commission by a Pacific ACP State, processed fishery products of headings 1604 and 1605 processed or manufactured in on-land premises in that State from non-originating materials of heading 0302 or 0303 that have been landed in a port of that State shall be considered as sufficiently worked or processed for the purposes of Article 2. The notification to the Commission shall indicate the development benefits to the fisheries sector in that State, and shall include the necessary information concerning the species concerned, the products to be manufactured and an indication of the respective quantities to be involved.
(b)A report to the Union on the implementation of point (a) shall be drawn up by the Pacific ACP State no later than three years after the notification.
(c)Point (a) shall apply without prejudice to sanitary and phytosanitary measures in force in the Union, effective conservation and sustainable management of fishing resources and support to combat illegal, unreported and unregulated fishing activities in the region.

4. Paragraphs 1, 2 and 3 shall apply except as provided for in Article 5.

Article 5

Insufficient working or processing operations

1. Without prejudice to paragraph 2, the following operations shall be considered as insufficient working or processing to confer the status of originating products, whether or not the requirements of Article 4 are satisfied:

(a)preserving operations to ensure that the products remain in good condition during transport and storage (ventilation, spreading out, drying, chilling, placing in salt, sulphur dioxide or other aqueous solutions, removal of damaged parts and like operations);

(b)simple operations consisting of the removal of dust, sifting or screening, sorting, classifying, matching (including the making-up of sets of articles), washing, painting, cutting up;

(c)changes of packaging and breaking up and assembly of packages;

(d)simple placing in bottles, flasks, bags, cases, boxes, fixing on cards or boards, etc., and all other simple packaging operations;

(e)affixing marks, labels and other like distinguishing signs on products or their packaging;

(f)simple mixing of products, whether or not of different kinds; mixing of sugar with any other material;

(g)simple assembly of parts to constitute a complete product;

(h)a combination of two or more of the operations specified in points (a) to (g);

(i)slaughter of animals;

(j)husking, partial or total bleaching, polishing and glazing of cereals and rice;

(k)operations to colour sugar or form sugar lumps; partial or total milling of sugar;

(l)peeling, stoning and shelling of fruits, nuts and vegetables.

2. All the operations carried out in either the ACP States or the Union on a given product shall be considered together when determining whether the working or processing undergone by that product is to be regarded as insufficient within the meaning of paragraph 1.

Article 6

Cumulation of origin

1. Materials originating in the Union or in the OCT shall be considered as materials originating in the ACP States when incorporated into a product obtained there. It shall not be necessary for such materials to have undergone sufficient working or processing, provided they have undergone working or processing beyond that referred to in Article 5.

2. Working and processing carried out in the Union or in the OCT shall be considered as having been carried out in the ACP States when the materials undergo subsequent working or processing in the ACP States beyond that referred to in Article 5.

3. For the purpose of determining whether the products originate in the OCT, the provisions of this Annex shall apply mutatis mutandis.

4. For products listed in Appendix 10, the provisions of this Article shall apply only after 1 October 2015.

5. Subject to the provisions of paragraphs 6, 7, 8 and 11, materials originating in South Africa shall be considered as originating in the ACP States when incorporated into a product obtained there provided they have undergone working or processing beyond that referred to in Article 5. It shall not be necessary for such materials to have undergone sufficient working or processing.

6. Products which have acquired originating status by virtue of paragraph 5 shall continue to be considered as products originating in the ACP States only when the value added there exceeds the value of the materials used that originate in South Africa. If that is not so, the products concerned shall be considered as originating in South Africa. In the allocation of origin, no account shall be taken of materials originating in South Africa which have undergone sufficient working or processing in the ACP States.

7. The cumulation provided for in paragraph 5 shall not apply to the products listed in Appendices 7, 10 and 11.

8. The cumulation provided for in paragraph 5 shall apply to the products listed in Appendix 8 only when the tariffs on those products in the framework of the TDCA have been eliminated. The Commission shall publish the date on which the conditions of this paragraph have been fulfilled in the Official Journal of the European Union (C series).

9. Without prejudice to paragraphs 7 and 8, working and processing carried out in South Africa shall be considered as having been carried out in another Member State of the South African Customs Union (SACU), being an ACP State, when the materials undergo subsequent working or processing in that other Member State of the SACU.

10. Without prejudice to paragraphs 7 and 8 and at the request of the ACP States, working and processing carried out in South Africa shall be considered as having been carried out in the ACP States when the materials undergo subsequent working or processing in an ACP State within the context of a regional economic integration agreement.

11. The requests of the ACP States shall be decided on in accordance with the examination procedure referred to in Article 19(5) of this Regulation.

12. The cumulation provided for in paragraph 5 may be applied only where the South African materials used have acquired the status of originating products through the application of rules of origin identical to those set out in this Annex. The cumulation provided for in paragraphs 9 and 10 may be applied only through the application of rules of origin identical to those set out in this Annex.

13. At the request of the ACP States, materials originating in a neighbouring developing country, other than an ACP State, belonging to a coherent geographical entity, shall be considered as materials originating in the ACP States when incorporated into a product obtained there. It shall not be necessary for such materials to have undergone sufficient working or processing, provided that:

the working or processing carried out in the ACP State exceeds the operations listed in Article 5,

the ACP States, the Union and the other countries concerned have concluded an agreement on adequate administrative procedures which will ensure correct implementation of this paragraph.

This paragraph shall not apply to tuna products classified under Harmonised System Chapter 3 or 16 and to rice products under tariff heading 1006.

For the purpose of determining whether products originate in a neighbouring developing country, the provisions of this Annex shall apply.

The requests of the ACP States shall be decided on in accordance with the examination procedure referred to in Article 19(5) of this Regulation. Such decisions shall also identify the products for which cumulation provided for under this paragraph may not be permitted.

Article 7

Unit of qualification

1. The unit of qualification for the application of this Annex shall be the particular product which is considered as the basic unit when determining classification using the nomenclature of the Harmonised System.

This means that:

(a)when a product composed of a group or assembly of articles is classified under the terms of the Harmonised System in a single heading, the whole shall constitute the unit of qualification;

(b)when a consignment consists of a number of identical products classified under the same heading of the Harmonised System, each product shall be taken individually when this Annex is applied.

2. Where, under General Rule 5 of the Harmonised System, packaging is included with the product for classification purposes, it shall be included for the purposes of determining origin.

Article 8

Accessories, spare parts and tools

Accessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle, which are part of the normal equipment and included in the price thereof or which are not separately invoiced, shall be regarded as one with the piece of equipment, machine, apparatus or vehicle in question.

Article 9

Sets

Sets, as defined in General Rule 3 of the Harmonised System, shall be regarded as originating when all the component products are originating. Nevertheless, when a set is composed of originating and non-originating products, the set as a whole shall be regarded as originating, provided that the value of the non-originating products does not exceed 15 % of the ex-works price of the set.

Article 10

Neutral elements

In order to determine whether a product is an originating product, it shall not be necessary to determine the origin of the following which might be used in its manufacture:

(a)energy and fuel;

(b)plant and equipment;

(c)machines and tools;

(d)goods which do not enter and which are not intended to enter into the final composition of the product.

TITLE III

TERRITORIAL REQUIREMENTS

Article 11

Principle of territoriality

1. Except as provided for in Article 6, the conditions for acquiring originating status set out in Title II shall be fulfilled without interruption in the ACP States.

2. Except as provided for in Article 6, if originating goods exported from the ACP States, the Union or the OCT to another country return, they shall be considered as non-originating, unless it can be demonstrated to the satisfaction of the customs authorities that:

(a)the returning goods are the same goods as those exported; and

(b)they have not undergone any operation beyond that necessary to preserve them in good condition while in that country or while being exported.

Article 12

Direct transport

1. The preferential treatment provided for in this Regulation shall apply only to products that satisfy the requirements of this Annex and are transported directly between the territory of the ACP States, of the Union, of the OCT or of South Africa for the purposes of Article 6 without entering any other territory. However, products constituting one single consignment may be transported through other territories with, should the occasion arise, transhipment or temporary warehousing in such territories, provided that they remain under the surveillance of the customs authorities in the country of transit or warehousing and do not undergo operations other than unloading, reloading or any operation designed to preserve them in good condition.

Originating products may be transported by pipeline across territory other than that of an ACP State or of the Union.

2. Evidence that the conditions set out in paragraph 1 have been fulfilled shall be supplied to the customs authorities of the importing country by the production of:

(a)a single transport document covering the passage from the exporting country through the country of transit; or

(b)a certificate issued by the customs authorities of the country of transit:

(i)giving an exact description of the products;

(ii)stating the dates of unloading and reloading of the products and, where applicable, the names of the ships, or the other means of transport used; and

(iii)certifying the conditions under which the products remained in the transit country;

or

(c)failing those, any substantiating documents.

Article 13

Exhibitions

1. Originating products sent from an ACP State for exhibition in a country or a territory other than those referred to in Article 6 and sold after the exhibition for importation into the Union shall benefit on importation from the provisions of this Regulation provided it is shown to the satisfaction of the customs authorities that:

(a)an exporter has consigned those products from an ACP State to the country or territory in which the exhibition is held and has exhibited them there;

(b)the products have been sold or otherwise disposed of by that exporter to a person in the Union;

(c)the products have been consigned during the exhibition or immediately thereafter in the state in which they were sent for exhibition; and

(d)the products have not, since they were consigned for exhibition, been used for any purpose other than demonstration at the exhibition.

2. A proof of origin shall be issued or made out in accordance with the provisions of Title IV and submitted to the customs authorities of the importing country in the normal manner. The name and address of the exhibition shall be indicated thereon. Where necessary, additional documentary evidence of the conditions under which they have been exhibited may be required.

3. Paragraph 1 shall apply to any trade, industrial, agricultural or crafts exhibition, fair or similar public show or display which is not organised for private purposes in shops or business premises with a view to the sale of foreign products and during which the products remain under customs control.

TITLE IV

PROOF OF ORIGIN

Article 14

General requirements

1. Products originating in the ACP States shall, on importation into the Union, benefit from the provisions of this Regulation upon submission of either:

(a)a movement certificate EUR.1, a specimen of which appears in Appendix 3; or

(b)in the cases specified in Article 19(1), a declaration, hereinafter referred to as the ‘invoice declaration’, given by the exporter on an invoice, a delivery note or any other commercial document which describes the products concerned in sufficient detail to enable them to be identified. The text of the invoice declaration appears in Appendix 4.

2. Notwithstanding paragraph 1, originating products within the meaning of this Annex shall, in the cases specified in Article 25, benefit from the provisions of this Regulation without it being necessary to submit any of the documents referred to in that paragraph.

Article 15

Procedure for the issue of a movement certificate EUR.1

1. A movement certificate EUR.1 shall be issued by the customs authorities of the exporting country on application having been made in writing by the exporter or, under the exporter's responsibility, by the authorised representative of the exporter.

2. For that purpose, the exporter or the authorised representative of the exporter shall fill out both the movement certificate EUR.1 and the application form, specimens of which appear in Appendix 3. Those forms shall be completed in accordance with the provisions of this Annex. If they are handwritten, they shall be completed in ink in printed characters. The description of the products shall be given in the box reserved for that purpose without leaving any blank lines. Where the box is not completely filled, a horizontal line shall be drawn below the last line of the description, the empty space being crossed through.

3. The exporter applying for the issue of a movement certificate EUR.1 shall be prepared to submit at any time, at the request of the customs authorities of the exporting ACP State where the movement certificate EUR.1 is issued, all appropriate documents proving the originating status of the products concerned as well as the fulfilment of the other requirements of this Annex.

4. A movement certificate EUR.1 shall be issued by the customs authorities of the exporting ACP State if the products concerned can be considered as products originating in the ACP States or in one of the other countries or territories referred to in Article 6 and fulfil the other requirements of this Annex.

5. The issuing customs authorities shall take any steps necessary to verify the originating status of the products and the fulfilment of the other requirements of this Annex. For that purpose they shall have the right to call for any evidence and to carry out any inspection of the exporter's accounts or any other check considered appropriate. The issuing customs authorities shall also ensure that the forms referred to in paragraph 2 are duly completed. In particular, they shall check whether the space reserved for the description of the products has been completed in such a manner as to exclude all possibility of fraudulent additions.

6. The date of issue of the movement certificate EUR.1 shall be indicated in box 11 of the certificate.

7. A movement certificate EUR.1 shall be issued by the customs authorities and made available to the exporter as soon as actual exportation has been effected or ensured.

Article 16

Movement certificates EUR.1 issued retrospectively

1. Notwithstanding Article 15(7), a movement certificate EUR.1 may exceptionally be issued after exportation of the products to which it relates if:

(a)it was not issued at the time of exportation because of errors or involuntary omissions or special circumstances; or

(b)it is demonstrated to the satisfaction of the customs authorities that a movement certificate EUR.1 was issued but was not accepted at importation for technical reasons.

2. For the implementation of paragraph 1, the exporter shall indicate in the application the place and date of exportation of the products to which the movement certificate EUR.1 relates, and state the reasons for that request.

3. The customs authorities may issue a movement certificate EUR.1 retrospectively only after verifying that the information supplied in the exporter's application complies with that in the corresponding file.

4. Movement certificates EUR.1 issued retrospectively shall be endorsed with the following phrase:

‘ISSUED RETROSPECTIVELY’

5. The endorsement referred to in paragraph 4 shall be inserted in box 7 of the movement certificate EUR.1.

Article 17

Issue of a duplicate movement certificate EUR.1

1. In the event of theft, loss or destruction of a movement certificate EUR.1, the exporter may apply to the customs authorities which issued it for a duplicate made out on the basis of the export documents in their possession.

2. The duplicate issued in this way shall be endorsed with the following word:

‘DUPLICATE’

3. The endorsement referred to in paragraph 2 shall be inserted in box 7 of the duplicate movement certificate EUR.1.

4. The duplicate, which shall bear the date of issue of the original movement certificate EUR.1, shall take effect as from that date.

Article 18

Issue of movement certificates EUR.1 on the basis of a proof of origin issued or made out previously

When originating products are placed under the control of a customs office in an ACP State or in the Union, it shall be possible to replace the original proof of origin by one or more movement certificates EUR.1 for the purpose of sending all or some of those products elsewhere within the ACP States or within the Union. The replacement movement certificate or certificates EUR.1 shall be issued by the customs office under whose control the products are placed.

Article 19

Conditions for making out an invoice declaration

1. An invoice declaration as referred to in point (b) of Article 14(1) may be made out:

(a)by an approved exporter within the meaning of Article 20; or

(b)by any exporter for any consignment consisting of one or more packages containing originating products whose total value does not exceed EUR 6 000.

2. An invoice declaration may be made out if the products concerned can be considered as products originating in the ACP States or in one of the other countries or territories referred to in Article 6 and fulfil the other requirements of this Annex.

3. The exporter making out an invoice declaration shall be prepared to submit at any time, at the request of the customs authorities of the exporting country, all appropriate documents proving the originating status of the products concerned as well as the fulfilment of the other requirements of this Annex.

4. An invoice declaration shall be made out by the exporter by typing, stamping or printing on the invoice the delivery note or another commercial document, the declaration, the text of which appears in Appendix 4 using one of the linguistic versions set out in that Appendix and in accordance with the provisions of the domestic law of the exporting country. If the declaration is handwritten, it shall be written in ink in printed characters.

5. Invoice declarations shall bear the original signature of the exporter in manuscript. However, an approved exporter within the meaning of Article 20 shall not be required to sign such declarations provided that he or she gives the customs authorities of the exporting country a written undertaking that he or she accepts full responsibility for any invoice declaration which identifies him or her as if it had been signed in manuscript by him or her.

6. An invoice declaration may be made out by the exporter when the products to which it relates are exported, or after exportation on condition that it is presented in the importing country no longer than two years after the importation of the products to which it relates.

Article 20

Approved exporter

1. The customs authorities of the exporting country may authorise any exporter who makes frequent shipments of products under the provisions of this Regulation to make out invoice declarations irrespective of the value of the products concerned. An exporter seeking such authorisation shall offer to the satisfaction of the customs authorities all guarantees necessary to verify the originating status of the products as well as the fulfilment of the other requirements of this Annex.

2. The customs authorities of the exporting country may grant the status of approved exporter subject to any conditions which they consider appropriate.

3. The customs authorities of the exporting country shall grant to the approved exporter a customs authorisation number which shall appear on the invoice declaration.

4. The customs authorities of the exporting country shall monitor the use of the authorisation by the approved exporter.

5. The customs authorities of the exporting country may withdraw the authorisation at any time. They shall do so where the approved exporter no longer offers the guarantees referred to in paragraph 1, does not fulfil the conditions referred to in paragraph 2 or otherwise makes incorrect use of the authorisation.

Article 21

Validity of proof of origin

1. A proof of origin shall be valid for ten months from the date of issue in the exporting country and shall be submitted within that period to the customs authorities of the importing country.

2. Proofs of origin which are submitted to the customs authorities of the importing country after the final date for presentation specified in paragraph 1 may be accepted for the purpose of applying preferential treatment where the failure to submit those documents by the final date set is due to exceptional circumstances.

3. In other cases of belated presentation, the customs authorities of the importing country may accept the proofs of origin where the products have been submitted before the final date.

Article 22

Transit procedure

When the products enter an ACP State other than the country of origin, a further period of validity of four months shall begin on the date on which the customs authorities in the country of transit enter the following in box 7 of the movement certificate EUR.1:

the word ‘transit’,

the name of the country of transit,

the official stamp, a specimen of which had been made available to the Commission, in conformity with Article 31, and

the date of the endorsements.

Article 23

Submission of proof of origin

Proofs of origin shall be submitted to the customs authorities of the importing country in accordance with the procedures applicable in that country. Those authorities may require a translation of a proof of origin and may also require the import declaration to be accompanied by a statement from the importer to the effect that the products meet the conditions required for the implementation of this Regulation.

Article 24

Importation by instalments

Where, at the request of the importer and on the conditions laid down by the customs authorities of the importing country, dismantled or non-assembled products within the meaning of General Rule 2(a) of the Harmonised System falling within Sections XVI and XVII or headings 7308 and 9406 of the Harmonised System are imported by instalments, a single proof of origin for such products shall be submitted to the customs authorities upon importation of the first instalment.

Article 25

Exemptions from proof of origin

1. Products sent as small packages from private persons to private persons or forming part of travellers' personal luggage shall be admitted as originating products without requiring the submission of a proof of origin, provided that such products are not imported by way of trade and have been declared as meeting the requirements of this Annex and where there is no doubt as to the veracity of such a declaration. In the case of products sent by post, that declaration can be made on the customs declaration CN22/CN23 or on a sheet of paper annexed to that document.

2. Imports which are occasional and consist solely of products for the personal use of the recipients or travellers or their families shall not be considered as imports by way of trade if it is evident from the nature and quantity of the products that no commercial purpose is in view.

3. Furthermore, the total value of those products shall not exceed EUR 500 in the case of small packages or EUR 1 200 in the case of products forming part of travellers' personal luggage.

Article 26

Information procedure for cumulation purposes

1. When Articles 2(2) and 6(1) are applied, evidence of the originating status within the meaning of this Annex of the materials coming from the other ACP States, the Union or the OCT shall be given by a movement certificate EUR.1 or by the supplier's declaration, a specimen of which is given in Appendix 5A, given by the exporter in the State or OCT from which the materials came.

2. When Article 2(2) and Article 6(2) and (9) are applied, evidence of the working or processing carried out in other ACP States, the Union, the OCT or South Africa shall be given by the supplier's declaration, a specimen of which appears in Appendix 5B, given by the exporter in the State or OCT from which the materials came.

3. A separate supplier's declaration shall be given by the supplier for each consignment of material on the commercial invoice relating to that shipment or in an annex to that invoice, or on a delivery note or other commercial document relating to that shipment which describes the materials concerned in sufficient detail for them to be identified.

4. The supplier's declaration may be made out on a pre-printed form.

5. The suppliers' declarations shall be signed in manuscript. However, where the invoice and the supplier's declaration are established using electronic data-processing methods, the supplier's declaration need not be signed in manuscript provided the responsible official in the supplying company is identified to the satisfaction of the customs authorities in the State where the suppliers' declarations are drawn up. Those customs authorities may lay down conditions for the implementation of this paragraph.

6. The supplier's declarations shall be submitted to the competent customs office in the exporting ACP State that has been requested to issue the movement certificate EUR.1.

Article 27

Supporting documents

The documents referred to in Articles 15(3) and 19(3) used for the purpose of proving that products covered by a movement certificate EUR.1 or an invoice declaration can be considered as products originating in an ACP State or in one of the other countries or territories referred to in Article 6 and fulfil the other requirements of this Annex may consist inter alia of the following:

(a)direct evidence of the processes carried out by the exporter or supplier to obtain the goods concerned, contained, for example, in the accounts or internal bookkeeping of the exporter or the supplier;

(b)documents proving the originating status of materials used, issued or made out in an ACP State or in one of the other countries or territories referred to in Article 6 where those documents are used in accordance with domestic law;

(c)documents proving the working or processing of materials in the ACP States, in the Union or in the OCT, issued or made out in an ACP State, in the Union or in an OCT, where those documents are used in accordance with domestic law;

(d)movement certificates EUR.1 or invoice declarations proving the originating status of materials used, issued or made out in the ACP States or in one of the other countries or territories referred to in Article 6 and in accordance with this Annex.

Article 28

Preservation of proof of origin and supporting documents

1. The exporter applying for the issue of a movement certificate EUR.1 shall keep the documents referred to in Article 15(3) for at least three years.

2. The exporter making out an invoice declaration shall keep a copy of that invoice declaration as well as the documents referred to in Article 19(3) for at least three years.

3. The customs authorities of the exporting country issuing a movement certificate EUR.1 shall keep the application form referred to in Article 15(2) for at least three years.

4. The customs authorities of the importing country shall keep the movement certificates EUR.1 and the invoice declarations submitted to them for at least three years.

Article 29

Discrepancies and formal errors

1. The discovery of slight discrepancies between the statements made in the proof of origin and those made in the documents submitted to the customs office for the purpose of carrying out the formalities for importing the products shall not ipso facto render the proof of origin null and void if it is duly established that that document does correspond to the products submitted.

2. Obvious formal errors such as typing errors on a proof of origin should not cause that document to be rejected if those errors are not such as to create doubts concerning the correctness of the statements made in that document.

Article 30

Amounts expressed in euro

1. For the application of Article 19(1)(b) and Article 25(3) in cases where products are invoiced in a currency other than euro, amounts in the national currencies of an ACP State, of the Member States and of the other countries or territories referred to in Article 6 equivalent to the amounts expressed in euro shall be fixed annually by each of the countries concerned.

2. A consignment shall benefit from the provisions of Article 19(1)(b) or Article 25(3) by reference to the currency in which the invoice is drawn up, according to the amount fixed by the country concerned.

3. The amounts to be used in any given national currency shall be the equivalent in that currency of the amounts expressed in euro as on the first working day of October each year. The amounts shall be communicated to the Commission by 15 October and shall apply from 1 January the following year. The Commission shall notify all countries concerned of the relevant amounts.

4. A country may round up or down the amount resulting from the conversion of an amount expressed in euro into its national currency. The rounded-off amount may not differ from the amount resulting from the conversion by more than 5 %. A country may retain unchanged its national currency equivalent of an amount expressed in euro if, at the time of the annual adjustment provided for in paragraph 3, the conversion of that amount, before any rounding-off, results in an increase of less than 15 % in the national currency equivalent. The national currency equivalent may be retained unchanged if the conversion would result in a decrease in that equivalent value.

5. The amounts expressed in euro shall be reviewed by the Commission. When carrying out that review, the Commission shall consider the desirability of preserving the effects of the limits concerned in real terms. For that purpose, it may decide to modify the amounts expressed in euro.

TITLE V

ARRANGEMENTS FOR ADMINISTRATIVE COOPERATION

Article 31

Mutual assistance

1. The ACP States shall send the Commission specimens of the stamps used together with the addresses of the customs authorities competent to issue movement certificates EUR.1 and carry out the subsequent verification of movement certificates EUR.1 and invoice declarations.

Movement certificates EUR.1 and invoice declarations shall be accepted for the purpose of applying preferential treatment from the date the information is received by the Commission.

The Commission shall send that information to the customs authorities of the Member States.

2. In order to ensure the proper application of this Annex, the Union, the OCT and the ACP States shall assist each other, through the competent customs administrations, in checking the authenticity of movement certificates EUR.1, invoice declarations or supplier's declarations and the correctness of the information given in those documents.

The authorities consulted shall provide the relevant information concerning the conditions under which a product has been made, indicating in particular the conditions in which the rules of origin have been complied with in the various ACP States, Member States and OCT concerned.

Article 32

Verification of proofs of origin

1. Subsequent verifications of proofs of origin shall be carried out at random or whenever the customs authorities of the importing country have reasonable doubts as to the authenticity of such documents, the originating status of the products concerned or the fulfilment of the other requirements of this Annex.

2. For the purposes of implementing paragraph 1, the customs authorities of the importing country shall return the movement certificate EUR.1 and the invoice, if it has been submitted, the invoice declaration, or a copy of those documents to the customs authorities of the exporting country giving, where appropriate, the reasons for the request for verification. Any documents and information obtained suggesting that the information given on the proof or origin is incorrect shall be forwarded in support of the request for verification.

3. The verification shall be carried out by the customs authorities of the exporting country. For that purpose, they shall have the right to call for any evidence and to carry out any inspection of the exporter's accounts or any other check considered appropriate.

4. If the customs authorities of the importing country decide to suspend the granting of preferential treatment to the products concerned while awaiting the results of the verification, release of the products shall be offered to the importer subject to any precautionary measures judged necessary.

5. The customs authorities requesting the verification shall be informed of the results of that verification as soon as possible. Those results shall indicate clearly whether the documents are authentic and whether the products concerned can be considered as products originating in the ACP States or in one of the countries or territories referred to in Article 6 and fulfil the other requirements of this Annex.

6. If in cases of reasonable doubt there is no reply within ten months of the date of the verification request or if the reply does not contain sufficient information to determine the authenticity of the document in question or the real origin of the products, the requesting customs authorities shall, except in exceptional circumstances, refuse entitlement to the preferences.

7. Where the verification procedure or any other information available appears to indicate that the provisions of this Annex are being contravened, appropriate enquires shall be carried out with due urgency to identify and prevent such contraventions.

Article 33

Verification of suppliers' declarations

1. Verification of suppliers' declarations shall be carried out at random or whenever the customs authorities of the importing State have reasonable doubts as to the authenticity of the document or the accuracy or completeness of the information concerning the true origin of the materials in question.

2. The customs authorities to which a supplier's declaration is submitted may request the customs authorities of the State where the declaration was made to issue an information certificate, a specimen of which appears in Appendix 6. Alternatively, the customs authorities to which a supplier's declaration is submitted may request the exporter to produce an information certificate issued by the customs authorities of the State where the declaration was made.

A copy of the information certificate shall be preserved by the office which issued it for at least three years.

3. The customs authorities requesting the verification shall be informed of the results of the verification as soon as possible. The results shall indicate clearly whether the declaration concerning the status of the materials is correct.

4. For the purpose of verification, suppliers shall keep a copy of the document containing the declaration together with all necessary evidence showing the true status of the materials for not less than three years.

5. The customs authorities in the State where the supplier's declaration is drawn up shall have the right to call for any evidence or to carry out any check which they consider appropriate in order to verify the correctness of any supplier's declaration.

6. Any movement certificate EUR.1 or invoice declaration issued or made out on the basis of an incorrect supplier's declaration shall be considered null and void.

Article 34

Penalties

Penalties shall be imposed on any person who draws up, or causes to be drawn up, a document which contains incorrect information for the purpose of obtaining preferential treatment for products.

Article 35

Free zones

1. All necessary steps shall be taken to ensure that products traded under cover of a proof of origin or a supplier's declaration and which in the course of transport use a free zone situated in their territory are not substituted by other goods and do not undergo handling other than normal operations designed to prevent their deterioration.

2. By way of derogation from paragraph 1, when originating products are imported into a free zone under cover of a proof of origin and undergo treatment or processing, the authorities concerned shall issue a new movement certificate EUR.1 at the exporter's request if the treatment or processing undergone complies with the provisions of this Annex.

Article 36

Derogations

1. On its own initiative or in response to a request from a beneficiary country the Commission may grant a beneficiary country a temporary derogation from the provisions of this Annex where:

(a)internal or external factors temporarily deprive it of the ability to comply with the rules for the acquisition of origin laid down in this Annex where it could do so previously; or

(b)it requires time to prepare itself to comply with the rules for the acquisition of origin laid down in this Annex.

2. Such a temporary derogation shall be limited to the duration of the effect of the internal or external factors giving rise to it or the length of time needed for the beneficiary country to achieve compliance with the rules.

3. A request for derogation shall be made in writing to the Commission. It shall state the reasons as indicated in paragraph 1 why a derogation is required and shall include appropriate supporting documents.

4. Measures under this Article shall be adopted in accordance with the examination procedure referred to in Article 19(5) of this Regulation.

The Union shall respond positively to all requests by ACP States which are duly justified in accordance with this Article and which cannot cause serious injury to an established Union industry.

TITLE VI

CEUTA AND MELILLA

Article 37

Special conditions

1. The term ‘Union’ used in this Annex shall not cover Ceuta and Melilla. The term ‘products originating in the Union’ shall not cover products originating in Ceuta and Melilla.

2. The provisions of this Annex shall apply mutatis mutandis in determining whether products may be deemed as originating in the ACP States when imported into Ceuta and Melilla.

3. Where products wholly obtained in Ceuta, Melilla or the Union undergo working and processing in the ACP States, they shall be considered as having been wholly obtained in the ACP States.

4. Working or processing carried out in Ceuta, Melilla or the Union shall be considered as having been carried out in the ACP States, when materials undergo further working or processing in the ACP States.

5. For the purpose of implementation of paragraphs 3 and 4 of this Article, the insufficient operations listed in Article 5 shall not be considered as working or processing.

6. Ceuta and Melilla shall be considered as a single territory.

TITLE VII

FINAL PROVISION

Article 38

Appendices

The Appendices to this Annex shall form an integral part thereof.

Appendix 1

Introductory notes to the list in appendix 2

Note 1:

The list sets out the conditions required for all products to be considered as sufficiently worked or processed within the meaning of Article 4 of this Annex.

Note 2:

1.The first two columns in the list describe the product obtained. The first column gives the heading number or chapter number used in the Harmonised System and the second column gives the description of goods used in that system for that heading or chapter. For each entry in the first two columns a rule is specified in column 3 or 4. Where, in some cases, the entry in the first column is preceded by an ‘ex’, this signifies that the rules in column 3 or 4 apply only to the part of that heading as described in column 2.

2.Where several heading numbers are grouped together in column 1 or a chapter number is given and the description of products in column 2 is therefore given in general terms, the adjacent rules in column 3 or 4 apply to all products which, under the Harmonised System, are classified in headings of the chapter or in any of the headings grouped together in column 1.

3.Where there are different rules in the list applying to different products within a heading, each indent contains the description of that part of the heading covered by the adjacent rules in column 3 or 4.

4.Where, for an entry in the first two columns, a rule is specified in both columns 3 and 4, the exporter may opt to apply either the rule set out in column 3 or that set out in column 4. If no origin rule is given in column 4, the rule set out in column 3 has to be applied.

Note 3:

1.The provisions of Article 4 of this Annex concerning products having acquired originating status which are used in the manufacture of other products apply regardless of whether that status has been acquired inside the factory where those products are used or in another factory in the Union or in the ACP States.

Example:

An engine of heading 8407, for which the rule states that the value of the non-originating materials which may be incorporated may not exceed 40 % of the ex-works price, is made from ‘other alloy steel roughly shaped by forging’ of heading ex 7224.

If that forging has been forged in the Union from a non-originating ingot, it has already acquired originating status by virtue of the rule for heading ex 7224 in the list. The forging can then count as originating in the value calculation for the engine regardless of whether it was produced in the same factory or in another factory in the Union. The value of the non-originating ingot is thus not taken into account when adding up the value of the non-originating materials used.

2.The rule in the list represents the minimum amount of working or processing required and the carrying out of more working or processing also confers originating status; conversely, the carrying out of less working or processing cannot confer originating status. Therefore, if a rule provides that non-originating material at a certain level of manufacture may be used, the use of such material at an earlier stage of manufacture is allowed and the use of such material at a later stage is not.

3.Without prejudice to Note 3.2, where a rule states that ‘materials of any heading’ may be used, materials of the same heading as the product may also be used, subject, however, to any specific limitations which may also be contained in the rule. However, the expression ‘manufacture from materials of any heading, including other materials of heading …’ means that only materials classified in the same heading as the product of a description other than that of the product as given in column 2 of the list may be used.

4.When a rule in the list specifies that a product may be manufactured from more than one material, this means that one or more materials may be used. It does not require that all be used.

Example:

The rule for fabrics of headings 5208 to 5212 provides that natural fibres may be used and those chemical materials, among other materials, may also be used. This does not mean that both have to be used; it is possible to use one or the other or both.

5.Where a rule in the list specifies that a product must be manufactured from a particular material, the condition does not prevent the use of other materials which, because of their inherent nature, cannot satisfy the rule. (See also Note 6.3 below in relation to textiles).

Example:

The rule for prepared foods of heading 1904 which specifically excludes the use of cereals and their derivatives does not prevent the use of mineral salts, chemicals and other additives which are not produced from cereals.

However, this does not apply to products which, although they cannot be manufactured from the particular materials specified in the list, can be produced from a material of the same nature at an earlier stage of manufacture.

Example:

In the case of an article of apparel of ex Chapter 62 made from non-woven materials, if the use of only non-originating yarn is allowed for this class of article, it is not possible to start from non-woven cloth — even if non-woven cloths cannot normally be made from yarn. In such cases, the starting material would normally be at the stage before yarn — that is the fibre stage.

6.Where, in a rule in the list, two percentages are given for the maximum value of non-originating materials that can be used, then those percentages may not be added together. In other words, the maximum value of all the non-originating materials used may never exceed the higher of the percentages given. Furthermore, the individual percentages must not be exceeded in relation to the particular materials to which they apply.

Note 4:

1.The term ‘natural fibres’ is used in the list to refer to fibres other than artificial or synthetic fibres. It is restricted to the stages before spinning takes place, including waste, and, unless otherwise specified, includes fibres that have been carded, combed or otherwise processed but not spun.

2.The term ‘natural fibres’ includes horsehair of heading 0503, silk of headings 5002 and 5003 as well as the wool fibres, fine or coarse animal hair of headings 5101 to 5105, the cotton fibres of headings 5201 to 5203 and the other vegetable fibres of headings 5301 to 5305.

3.The terms ‘textile pulp’, ‘chemical materials’ and ‘paper-making materials’ are used in the list to describe the materials not classified in Chapters 50 to 63, which can be used to manufacture artificial, synthetic or paper fibres or yarns.

4.The term ‘man-made staple fibres’ is used in the list to refer to synthetic or artificial filament tow, staple fibres or waste, of headings 5501 to 5507.

Note 5:

1.Where for a given product in the list a reference is made to this Note, the conditions set out in column 3 shall not be applied to any basic textile materials, used in the manufacture of that product, which, taken together, represent 10 % or less of the total weight of all the basic textile materials used. (See also Notes 5.3 and 5.4 below).

2.However, the tolerance mentioned in Note 5.1 may only be applied to mixed products which have been made from two or more basic textile materials.

The following are the basic textile materials:

silk,

wool,

coarse animal hair,

fine animal hair,

horsehair,

cotton,

paper-making materials and paper,

flax,

true hemp,

jute and other textile bast fibres,

sisal and other textile fibres of the genus Agave,

coconut, abaca, ramie and other vegetable textile fibres,

synthetic man-made filaments,

artificial man-made filaments,

current conducting filaments,

synthetic man-made staple fibres of polypropylene,

synthetic man-made staple fibres of polyester,

synthetic man-made staple fibres of polyamide,

synthetic man-made staple fibres of polyacrylonitrile,

synthetic man-made staple fibres of polyimide,

synthetic man-made staple fibres of polytetrafluoroethylene,

synthetic man-made staple fibres of polyphenylene sulphide,

synthetic man-made staple fibres of polyvinyl chloride,

other synthetic man-made staple fibres,

artificial man-made staple fibres of viscose,

other artificial man-made staple fibres,

yarn made of polyurethane segmented with flexible segments of polyether whether or not gimped,

yarn made of polyurethane segmented with flexible segments of polyester whether or not gimped,

products of heading 5605 (metallised yarn) incorporating strip consisting of a core of aluminium foil or of a core of plastic film whether or not coated with aluminium powder, of a width not exceeding 5 mm, sandwiched by means of a transparent or coloured adhesive between two layers of plastic film,

other products of heading 5605.

Example:

A yarn of heading 5205 made from cotton fibres of heading 5203 and synthetic staple fibres of heading 5506 is a mixed yarn. Therefore, non-originating synthetic staple fibres that do not satisfy the origin rules (which require manufacture from chemical materials or textile pulp) may be used up to a weight of 10 % of the yarn.

Example:

A woollen fabric of heading 5112 made from woollen yarn of heading 5107 and synthetic yarn of staple fibres of heading 5509 is a mixed fabric. Therefore synthetic yarn which does not satisfy the origin rules (which require manufacture from chemical materials or textile pulp) or woollen yarn that does not satisfy the origin rules (which require manufacture from natural fibres, not carded or combed or otherwise prepared for spinning) or a combination of the two may be used provided their total weight does not exceed 10 % of the weight of the fabric.

Example:

Tufted textile fabric of heading 5802 made from cotton yarn of heading 5205 and cotton fabric of heading 5210 is only a mixed product if the cotton fabric is itself a mixed fabric being made from yarns classified in two separate headings or if the cotton yarns used are themselves mixtures.

Example:

If the tufted textile fabric concerned had been made from cotton yarn of heading 5205 and synthetic fabric of heading 5407, then, obviously, the yarns used are two separate basic textile materials and the tufted textile fabric is accordingly a mixed product.

3.In the case of products incorporating ‘yarn made of polyurethane segmented with flexible segments of polyether whether or not gimped’ the tolerance is 20 % in respect of the yarn.

4.In the case of products incorporating ‘strip consisting of a core of aluminium foil or of a core of plastic film whether or not coated with aluminium powder, of a width not exceeding 5 mm, sandwiched by means of an adhesive between two layers of plastic film’, the tolerance is 30 % in respect of the strip.

Note 6:

1.In the case of those textile products, which are marked in the list by a footnote referring to this Introductory Note, textile trimmings and accessories which do not satisfy the rule set out in the list in column 3 for the made up products concerned may be used provided that their weight does not exceed 10 % of the total weight of all the textile materials incorporated.

Textile trimmings and accessories are those classified in Chapters 50 to 63. Linings and interlinings are not to be regarded as trimmings or accessories.

2.Any non-textile trimmings and accessories or other materials used which contain textiles do not have to satisfy the conditions set out in column 3 even though they fall outside the scope of Note 3.5.

3.In accordance with Note 3.5, any non-originating non-textile trimmings and accessories or other product, which do not contain any textiles, may anyway, be used freely where they cannot be made from the materials listed in column 3.

For example (1), if a rule in the list says that for a particular textile item, such as a blouse, yarn must be used, this does not prevent the use of metal items, such as buttons, because they cannot be made from textile materials.

4.Where a percentage rule applies, the value of trimmings and accessories must be taken into account when calculating the value of the non-originating materials incorporated.

Note 7:

1.For the purposes of headings ex 2707, 2713 to 2715, ex 2901, ex 2902 and ex 3403, the ‘specific processes’ are the following:

(a)vacuum distillation;

(b)redistillation by a very thorough fractionation process (2);

(c)cracking;

(d)reforming;

(e)extraction by means of selective solvents;

(f)the process comprising all the following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride; neutralisation with alkaline agents; decolourisation and purification with naturally active earth, activated earth, activated charcoal or bauxite;

(g)polymerisation;

(h)alkylation;

(i)isomerisation.

2.For the purposes of headings 2710, 2711 and 2712, the ‘specific processes’ are the following:

(a)vacuum distillation;

(b)redistillation by a very thorough fractionation process (2);

(c)cracking;

(d)reforming;

(e)extraction by means of selective solvents;

(f)the process comprising all the following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride; neutralisation with alkaline agents; decolourisation and purification with naturally active earth, activated earth, activated charcoal or bauxite;

(g)polymerisation;

(h)alkylation;

(i)isomerisation;

(j)in respect of heavy oils falling within heading ex 2710 only, desulphurisation with hydrogen resulting in a reduction of at least 85 % of the sulphur content of the products processed (ASTM D 1266-59 T method);

(k)in respect of products falling within heading 2710 only, deparaffining by a process other than filtering;

(l)in respect of heavy oils falling within heading ex 2710 only, treatment with hydrogen at a pressure of more than 20 bar and a temperature of more than 250 °C with the use of a catalyst, other than to effect desulphurisation, when the hydrogen constitutes an active element in a chemical reaction. The further treatment with hydrogen of lubricating oils of heading ex 2710 (e.g. hydrofinishing or decolourisation) in order, more especially, to improve colour or stability shall not, however, be deemed to be a specific process;

(m)in respect of fuel oils falling within heading ex 2710 only, atmospheric distillation, on condition that less than 30 % of those products distils, by volume, including losses, at 300 °C by the ASTM D 86 method;

(n)in respect of heavy oils other than gas oils and fuel oils falling within heading ex 2710 only, treatment by means of a high-frequency electrical brush-discharge.

3.For the purposes of headings ex 2707, 2713 to 2715, ex 2901, ex 2902 and ex 3403, simple operations such as cleaning, decanting, desalting, water separation, filtering, colouring, marking, obtaining a sulphur content as a result of mixing products with different sulphur contents, any combination of those operations or like operations do not confer origin.



(1) This example is given for the purpose of explanation only. It is not legally binding.

(2) See additional Explanatory Note 4(b) to Chapter 27 of the Combined Nomenclature.

Appendix 2

List of working or processing required to be carried out on non-originating materials in order for the product manufactured to acquire originating status

The products included in the list may not all be covered by this Regulation. It is therefore necessary to consult the other parts of this Regulation.

HS heading NoDescription of productWorking or processing carried out on non-originating materials that confers originating status
(1)(2)(3) or (4)
Chapter 01Live animalsAll the animals of Chapter 1 used must be wholly obtained
Chapter 02Meat and edible meat offalManufacture in which all the materials of Chapters 1 and 2 used must be wholly obtained
ex Chapter 03Fish and crustaceans, molluscs and other aquatic invertebrates, except for:Manufacture in which all the materials of Chapter 3 used must be wholly obtained
0304Fish fillets and other fish meat (whether or not minced), fresh, chilled of frozenManufacture in which the value of any materials of Chapter 3 used does not exceed 15 % of the ex-works price of the product
0305Fish, dried, salted or in brine; smoked fish, whether or not cooked before or during the smoking process; flours, meals and pellets of fish, fit for human consumptionManufacture in which the value of any materials of Chapter 3 used does not exceed 15 % of the ex-works price of the product
ex 0306Crustaceans, whether in shell or not, dried, salted or in brine; crustaceans, in shell, cooked by steaming or by boiling in water, whether or not chilled, frozen, dried, salted or in brine; flours, meals and pellets of crustaceans, fit for human consumptionManufacture in which the value of any materials of Chapter 3 used does not exceed 15 % of the ex-works price of the product
ex 0307Molluscs, whether in shell or not, dried, salted or in brine; aquatic invertebrates other than crustaceans and molluscs, dried, salted or in brine; flours, meals and pellets of crustaceans, fit for human consumptionManufacture in which the value of any materials of Chapter 3 used does not exceed 15 % of the ex-works price of the product
ex Chapter 04Dairy produce; birds' eggs; natural honey; edible products of animal origin, not elsewhere specified or included; except for:Manufacture in which all the materials of Chapter 4 used must be wholly obtained
0403Buttermilk, curdled milk and cream, yoghurt, kephir and other fermented or acidified milk and cream, whether or not concentrated or containing added sugar or other sweetening matter or flavoured or containing added fruit, nuts or cocoaManufacture in which:

all the materials of Chapter 4 used must be wholly obtained;

any fruit juice (except those of pineapple, lime or grapefruit) of heading 2009 used must already be originating;

the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
ex Chapter 05Products of animal origin, not elsewhere specified or included; except for:Manufacture in which all the materials of Chapter 5 used must be wholly obtained
ex 0502Prepared pigs', hogs' or boars' bristles and hairCleaning, disinfecting, sorting and straightening of bristles and hair
Chapter 06Live trees and other plants; bulbs, roots and the like; cut flowers and ornamental foliageManufacture in which:

all the materials of Chapter 6 used must be wholly obtained;

the value of all the materials used does not exceed 50 % of the ex-works price of the product
Chapter 07Edible vegetables and certain roots and tubersManufacture in which all the materials of Chapter 7 used must be wholly obtained
Chapter 08Edible fruit and nuts; peel of citrus fruits or melonsManufacture in which:

all the fruit and nuts used must be wholly obtained;

the value of any materials of Chapter 17 used does not exceed 30 % of the value of the ex-works price of the product
ex Chapter 09Coffee, tea, maté and spices; except for:Manufacture in which all the materials of Chapter 9 used must be wholly obtained
0901Coffee, whether or not roasted or decaffeinated; coffee husks and skins; coffee substitutes containing coffee in any proportionManufacture from materials of any heading
0902Tea, whether or not flavouredManufacture from materials of any heading
ex 0910Mixtures of spicesManufacture from materials of any heading
Chapter 10CerealsManufacture in which all the materials of Chapter 10 used must be wholly obtained
ex Chapter 11Products of the milling industry; malt; starches; inulin; wheat gluten; except for:Manufacture in which all the cereals, edible vegetables, roots and tubers of heading 0714 or fruit used must be wholly obtained
ex 1106Flour, meal and powder of the dried, shelled leguminous vegetables of heading 0713Drying and milling of leguminous vegetables of heading 0708
Chapter 12Oil seeds and oleaginous fruits; miscellaneous grains, seeds and fruit; industrial or medicinal plants; straw and fodderManufacture in which all the materials of Chapter 12 used must be wholly obtained
1301Lac; natural gums, resins, gum-resins and oleoresins (for example, balsams)Manufacture in which the value of any materials of heading 1301 used may not exceed 50 % of the ex-works price of the product
1302Vegetable saps and extracts; pectic substances, pectinates and pectates; agar-agar and other mucilages and thickeners, whether or not modified, derived from vegetable products:
Mucilages and thickeners, modified, derived from vegetable products
Manufacture from non-modified mucilages and thickeners
Other
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
Chapter 14Vegetable plaiting materials; vegetable products not elsewhere specified or includedManufacture in which all the materials of Chapter 14 used must be wholly obtained
ex Chapter 15Animal or vegetable fats and oils and their cleavage products; prepared edible fats; animals or vegetable waxes; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
1501Pig fat (including lard) and poultry fat, other than that of heading 0209 or 1503 :
Fats from bones or waste
Manufacture from materials of any heading except those of heading 0203 , 0206 or 0207 or bones of heading 0506
Other
Manufacture from meat or edible offal of swine of heading 0203 or 0206 or of meat and edible offal of poultry of heading 0207
1502Fats of bovine animals, sheep or goats, other than those of heading 1503
Fats from bones or waste
Manufacture from materials of any heading except those of heading 0201 , 0202 , 0204 or 0206 or bones of heading 0506
Other
Manufacture in which all the materials of Chapter 2 used must be wholly obtained
1504Fats and oils and their fractions, of fish or marine mammals, whether or not refined, but not chemically modified:
Solid fractions
Manufacture from materials of any heading including other materials of heading 1504
Other
Manufacture in which all the materials of Chapters 2 and 3 used must be wholly obtained
ex 1505Refined lanolinManufacture from crude wool grease of heading 1505
1506Other animals fats and oils and their fractions, whether or not refined, but not chemically modified:
Solid fractions
Manufacture from materials of any heading including other materials of heading 1506
Other
Manufacture in which all the materials of Chapter 2 used must be wholly obtained
1507 to 1515Vegetable oils and their fractions:
Soya, ground nut, palm, copra, palm kernel, babassu, tung and oiticica oil, myrtle wax and Japan wax, fractions of jojoba oil and oils for technical or industrial uses other than the manufacture of foodstuffs for human consumption
Manufacture in which all the materials used are classified within a heading other than that of the product
Solid fractions, except for that of jojoba oil
Manufacture from other materials of headings 1507 to 1515
Other
Manufacture in which all the vegetable materials used must be wholly obtained
1516Animal or vegetable fats and oils and their fractions, partly or wholly hydrogenated, interesterified, reesterified or elaidinised, whether or not refined, but not further preparedManufacture in which:

all the materials of Chapter 2 used must be wholly obtained;

all the vegetable materials used must be wholly obtained. However, materials of headings 1507 , 1508 , 1511 and 1513 may be used
1517Margarine; edible mixtures or preparations of animal or vegetable fats or oils or of fractions of different fats or oils of this Chapter, other than edible fats or oils or their fractions of heading 1516Manufacture in which:

all the materials of Chapters 2 and 4 used must be wholly obtained;

all the vegetable materials used must be wholly obtained. However, materials of headings 1507 , 1508 , 1511 and 1513 may be used
ex Chapter 16Preparations of meat, of fish or of crustaceans, molluscs or other aquatic invertebrates; except for:Manufacture from animals of Chapter 1.
1604 and 1605Prepared or preserved fish; caviar and caviar substitutes prepared from fish eggs;

Crustaceans, molluscs and other aquatic invertebrates, prepared or preserved
Manufacture in which the value of any materials of Chapter 3 used does not exceed 15 % of the ex-works price of the product
ex Chapter 17Sugars and sugar confectionery; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
ex 1701Cane or beet sugar and chemically pure sucrose, in solid form, flavoured or colouredManufacture in which the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
1702Other sugars, including chemically pure lactose, maltose, glucose and fructose, in solid form; sugar syrups not containing added flavouring or colouring matter; artificial honey, whether or not mixed with natural honey; caramel:
Chemically pure maltose and fructose
Manufacture from materials of any heading including other materials of heading 1702
Other sugars in solid form, flavoured or coloured
Manufacture in which the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
Other
Manufacture in which all the materials used must already be originating
ex 1703Molasses resulting from the extraction or refining of sugar, flavoured or colouredManufacture in which the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
1704Sugar confectionery (including white chocolate), not containing cocoaManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
Chapter 18Cocoa and cocoa preparationsManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
1901Malt extract; food preparations of flour, meal, starch or malt extract, not containing cocoa or containing less than 40 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included; food preparations of goods of headings 0401 to 0404 , not containing cocoa or containing less than 5 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included:
Malt extract
Manufacture from cereals of Chapter 10
Other
Manufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
1902Pasta, whether or not cooked or stuffed (with meat or other substances) or otherwise prepared, such as spaghetti, macaroni, noodles, lasagne, gnocchi, ravioli, cannelloni; couscous, whether or not prepared:
Containing 20 % or less by weight of meat, meat offal, fish, crustaceans or molluscs
Manufacture in which all the cereals and derivatives (except durum wheat and its derivatives) used must be wholly obtained
Containing more than 20 % by weight of meat, meat offal, fish, crustaceans or molluscs
Manufacture in which:

all cereals and derivatives (except durum wheat and its derivatives) used must be wholly obtained;

all the materials of Chapters 2 and 3 used must be wholly obtained
1903Tapioca and substitutes therefore prepared from starch, in the form of flakes, grains, pearls, siftings or in similar formsManufacture from materials of any heading except potato starch of heading 1108
1904Prepared foods obtained by the swelling or roasting of cereals or cereal products (for example, corn flakes); cereals (other than maize (corn)) in grain form or in the form of flakes or other worked grains (except flour and meal), pre-cooked, or otherwise prepared, not elsewhere specified or includedManufacture:

from materials not classified within heading 1806 ;

in which all the cereals and flour (except durum wheat and its derivates) used must be wholly obtained;

in which the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
1905Bread, pastry, cakes, biscuits and other bakers' wares, whether or not containing cocoa; communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar productsManufacture from materials of any heading except those of Chapter 11
ex Chapter 20Preparations of vegetables, fruit, nuts or other parts of plants; except for:Manufacture in which all the fruit, nuts or vegetables used must be wholly obtained
ex 2001Yams, sweet potatoes and similar edible parts of plants containing 5 % or more by weight of starch, prepared or preserved by vinegar or acetic acidManufacture in which all the materials used are classified within a heading other than that of the product
ex 2004 and ex 2005Potatoes in the form of flour, meal or flakes, prepared or preserved otherwise than by vinegar or acetic acidManufacture in which all the materials used are classified within a heading other than that of the product
2006Vegetables, fruit, nuts, fruit-peel and other parts of plants, preserved by sugar (drained, glacé or crystallised)Manufacture in which the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
2007Jams, fruit jellies, marmalades, fruit or nut purée and fruit or nut pastes, being cooked preparations, whether or not containing added sugar or other sweetening matterManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
ex 2008
Nuts, not containing added sugar or spirit
Manufacture in which the value of the originating nuts and oil seeds of headings 0801 , 0802 and 1202 to 1207 used exceeds 60 % of the ex-works price of the product
Peanut butter; mixtures based on cereals; palm hearts; maize (corn)
Manufacture in which all the materials used are classified within a heading other than that of the product
Other except for fruit and nuts cooked otherwise than by steaming or boiling in water, not containing added sugar, frozen
Manufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
2009Fruit juices (including grape must) and vegetable juices, unfermented and not containing added spirit, whether or not containing added sugar or other sweetening matterManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
ex Chapter 21Miscellaneous edible preparations; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
2101Extracts, essences and concentrates, of coffee, tea or maté and preparations with a basis of these products or with a basis of coffee, tea or maté; roasted chicory and other roasted coffee substitutes, and extracts, essences and concentrates thereofManufacture in which:

all the materials used are classified within a heading other than that of the product;

all the chicory used must be wholly obtained
2103Sauces and preparations therefore; mixed condiments and mixed seasonings; mustard flour and meal and prepared mustard:
Sauces and preparations therefore; mixed condiments and mixed seasonings
Manufacture in which all the materials used are classified within a heading other than that of the product. However, mustard flour or meal or prepared mustard may be used
Mustard flour and meal and prepared mustard
Manufacture from materials of any heading
ex 2104Soups and broths and preparations thereforeManufacture from materials of any heading except prepared or preserved vegetables of headings 2002 to 2005
2106Food preparations not elsewhere specified or includedManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product
ex Chapter 22Beverages, spirits and vinegar; except for:Manufacture in which:

all the materials used are classified within a heading other than that of the product;

all the grapes or any material derived from grapes used must be wholly obtained
2202Waters, including mineral waters and aerated waters, containing added sugar or other sweetening matter or flavoured, and other non-alcoholic beverages, not including fruit or vegetable juices of heading 2009Manufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of any materials of Chapter 17 used does not exceed 30 % of the ex-works price of the product;

any fruit juice used (except for pineapple, lime and grapefruit juices) must already be originating
2207Undenatured ethyl alcohol of an alcoholic strength by volume of 80 % vol. or higher; ethyl alcohol and other spirits, denatured, of any strength.Manufacture:

sing materials not classified in heading 2207 or 2208 ,

in which all the grapes or any materials derived from grapes used must be wholly obtained or if all the other materials used are already originating, arrack may be used up to a limit of 5 % by volume
2208Undenatured ethyl alcohol of an alcoholic strength by volume of less than 80 % vol.; spirits, liqueurs and other spirituous beveragesManufacture:

from materials not classified within heading 2207 or 2208 ,

in which all the grapes or any material derived from grapes used must be wholly obtained or if all the other materials used are already originating, arrack may be used up to a limit of 5 % by volume
ex Chapter 23Residues and waste from the food industries; prepared animal fodder; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
ex 2301Whale meal; flours, meals and pellets of fish or of crustaceans, molluscs or other aquatic invertebrates, unfit for human consumptionManufacture in which all the materials of Chapters 2 and 3 used must be wholly obtained
ex 2303Residues from the manufacture of starch from maize (excluding concentrated steeping liquors), of a protein content, calculated on the dry product, exceeding 40 % by weightManufacture in which all the maize used must be wholly obtained
ex 2306Oil cake and other solid residues resulting from the extraction of olive oil, containing more than 3 % of olive oilManufacture in which all the olives used must be wholly obtained
2309Preparations of a kind used in animal feedingManufacture in which:

all the cereals, sugar or molasses, meat or milk used must already be originating;

all the materials of Chapter 3 used must be wholly obtained
ex Chapter 24Tobacco and manufactured tobacco substitutes; except for:Manufacture in which all the materials of Chapter 24 used must be wholly obtained
2402Cigars, cheroots, cigarillos and cigarettes, of tobacco or of tobacco substitutesManufacture in which at least 70 % by weight of the unmanufactured tobacco or tobacco refuse of heading 2401 used must already be originating
ex 2403Smoking tobaccoManufacture in which at least 70 % by weight of the unmanufactured tobacco or tobacco refuse of heading 2401 used must already be originating
ex Chapter 25Salt; sulphur; earths and stone; plastering materials, lime and cement; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
ex 2504Natural crystalline graphite, with enriched carbon content, purified and groundEnriching of the carbon content, purifying and grinding of crude crystalline graphite
ex 2515Marble, merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape, of a thickness not exceeding 25 cmCutting, by sawing or otherwise, of marble (even if already sawn) of a thickness exceeding 25 cm
ex 2516Granite, porphyry, basalt, sandstone and other monumental and building stone, merely cut, by sawing or otherwise, into blocks or slabs of a rectangular (including square) shape, of a thickness not exceeding 25 cmCutting, by sawing or otherwise, of stone (even if already sawn) of a thickness exceeding 25 cm
ex 2518Calcined dolomiteCalcinations of dolomite not calcined
ex 2519Crushed natural magnesium carbonate (magnetite), in hermetically-sealed containers, and magnesium oxide, whether or not pure, other than fused magnesia or dead-burned (sintered) magnesiaManufacture in which all the materials used is classified within a heading other than that of the product. However, natural magnesium carbonate (magnetite) may be used
ex 2520Plasters specially prepared for dentistryManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 2524Natural asbestos fibresManufacture from asbestos concentrate
ex 2525Mica powderGrinding of mica or mica waste
ex 2530Earth colours, calcined or powderedCalcinations or grinding of earth colours
Chapter 26Ores, slag and ashManufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 27Mineral fuels, mineral oils and products of their distillation; bituminous substances; mineral waxes; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
ex 2707Oils in which the weight of the aromatic constituents exceeds that of the non-aromatic constituents, being oils similar to mineral oils obtained by distillation of high temperature coal tar, of which more than 65 % by volume distils at a temperature of up to 250 °C (including mixtures of petroleum spirit and benzole), for use as power or heating fuelsOperations of refining and/or one or more specific process(es) (1)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product
ex 2709Crude oils obtained from bituminous mineralsDestructive distillation of bituminous materials
2710Petroleum oils and oils obtained from bituminous materials, other than crude; preparations not elsewhere specified or included, containing by weight 70 % or more of petroleum oils or of oils obtained from bituminous materials, these oils being the basic constituents of the preparationsOperations of refining and/or one or more specific process(es) (2)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product
2711Petroleum gases and other gaseous hydrocarbonsOperations of refining and/or one or more specific process(es) (2)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product
2712Petroleum jelly; paraffin wax, microcrystalline petroleum wax, slack wax, ozokerite, lignite wax, peat wax, other mineral waxes and similar products obtained by synthesis or by other processes, whether or not colouredOperations of refining and/or one or more specific process(es) (2)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product
2713Petroleum coke, petroleum bitumen and other residues of petroleum oils or of oils obtained from bituminous materialsOperations of refining and/or one or more specific process(es) (1)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product
2714Bitumen and asphalt, natural; bituminous or oil shale and tar sands; asphaltites and asphaltic rocksOperations of refining and/or one or more specific process(es) (1)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product
2715Bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch (for example, bituminous mastics, cut-backs)Operations of refining and/or one or more specific process(es) (1)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product
ex Chapter 28Inorganic chemicals; organic or inorganic compounds of precious metals, of rare-earth metals, of radioactive elements or of isotopes; except for:Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 2805‘Mischmetall’Manufacture by electrolytic or thermal treatment in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 2811Sulphur trioxideManufacture from sulphur dioxideManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 2833Aluminium sulphateManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 2840Sodium perborateManufacture from disodium tetraborate pentahydrateManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 29Organic chemicals; except for:Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 2901Acyclic hydrocarbons for use as power or heating fuelsOperations of refining and/or one or more specific process(es) (1)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product
ex 2902Cyclanes and cyclenes (other than azulenes), benzene, toluene, xylenes, for use as power or heating fuelsOperations of refining and/or one or more specific process(es) (1)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used, provided their value does not exceed 50 % of the ex-works price of the product
ex 2905Metal alcoholates of alcohols of this heading and of ethanolManufacture from materials of any heading, including other materials of heading 2905 . However, metal alcoholates of this heading may be used, provided their value does not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
2915Saturated acyclic monocarboxylic acids and their anhydrides, halides, peroxides and peroxyacids; their halogenated, sulphonated, nitrated or nitrosated derivativesManufacture from materials of any heading. However, the value of all the materials of headings 2915 and 2916 used may not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 2932
Internal ethers and their halogenated, sulphonated, nitrated or nitrosated derivatives
Manufacture from materials of any heading. However, the value of all the materials of heading 2909 used may not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
Cyclic acetals and internal hemiacetals and their halogenated, sulphonated, nitrated or nitrosated derivatives
Manufacture from materials of any headingManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
2933Heterocyclic compounds with nitrogen hetero-atom(s) onlyManufacture from materials of any heading. However, the value of all the materials of headings 2932 and 2933 used may not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
2934Nucleic acids and their salts; other heterocyclic compoundsManufacture from materials of any heading. However, the value of all the materials of headings 2932 , 2933 and 2934 used may not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 30Pharmaceutical products; except for:Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product
3002Human blood; animal blood prepared for therapeutic, prophylactic or diagnostic uses; antisera and other blood fractions and modified immunological products, whether or not obtained by means of biotechnological processes; vaccines, toxins, cultures of micro-organisms (excluding yeasts) and similar products:
Products consisting of two or more constituents which have been mixed together for therapeutic or prophylactic uses or unmixed products for these uses, put up in measured doses or in forms or packing's for retail sale
Manufacture from materials of any heading, including other materials of heading 3002 . The materials of this description may also be used, provided their value does not exceed 20 % of the ex-works price of the product
Other:
– –human blood
Manufacture from materials of any heading, including other materials of heading 3002 . The materials of this description may also be used, provided their value does not exceed 20 % of the ex-works price of the product
– –animal blood prepared for therapeutic or prophylactic uses
Manufacture from materials of any heading, including other materials of heading 3002 . The materials of this description may also be used, provided their value does not exceed 20 % of the ex-works price of the product
– –blood fractions other than antisera, haemoglobin, blood globulins and serum globulins
Manufacture from materials of any heading, including other materials of heading 3002 . The materials of this description may also be used, provided their value does not exceed 20 % of the ex-works price of the product
– –haemoglobin, blood globulins and serum globulins
Manufacture from materials of any heading, including other materials of heading 3002 . The materials of this description may also be used, provided their value does not exceed 20 % of the ex-works price of the product
– –other
Manufacture from materials of any heading, including other materials of heading 3002 . The materials of this description may also be used, provided their value does not exceed 20 % of the ex-works price of the product
3003 and 3004Medicaments (excluding goods of heading 3002 , 3005 or 3006 ):
Obtained from amikacin of heading 2941
Manufacture in which all the materials used is classified within a heading other than that of the product. However, materials of heading 3003 or 3004 may be used provided their value, taken together, does not exceed 20 % of the ex-works price of the product
Other
Manufacture in which:

all the materials used are classified within a heading other than that of the product. However, materials of heading 3003 or 3004 may be used provided their value, taken together, does not exceed 20 % of the ex-works price of the product;

the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex Chapter 31Fertilisers; except for:Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 3105Mineral or chemical fertilisers containing two or three of the fertilising elements nitrogen, phosphorous and potassium; other fertilisers; goods of this Chapter, in tablets or similar forms or in packages of a gross weight not exceeding 10 kg, except for:

sodium nitrate

calcium cyanamide

potassium sulphate

magnesium potassium sulphate
Manufacture in which:

all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the product;

the value of all the materials used does not exceed 50 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 32Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other colouring matter; paints and varnishes; putty and other mastics; inks; except for:Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 3201Tannins and their salts, ethers, esters and other derivativesManufacture from tanning extracts of vegetable originManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
3205Colour lakes; preparations as specified in Note 3 to this Chapter based on colour lakes (3)Manufacture from materials of any heading, except headings 3203 , 3204 and 3205 . However, materials from heading 3205 may be used provided their value does not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 33Essential oils and resinoids; perfumery, cosmetic or toilet preparations; except for:Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
3301Essential oils (terpeneless or not), including concretes and absolutes; resinoids; extracted oleoresins; concentrates of essential oils in fats, in fixed oils, in waxes or the like, obtained by effleurage or maceration; terpenic by-products of the deterpenation of essential oils; aqueous distillates and aqueous solutions of essential oilsManufacture from materials of any heading, including materials of a different ‘group’ (4) in this heading. However, materials of the same group may be used, provided their value does not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 34Soap, organic surface-active agents, washing preparations, lubricating preparations, artificial waxes, prepared waxes, polishing or scouring preparations, candles and similar articles, modelling pastes, ‘dental waxes’ and dental preparations with a basis of plaster; except for:Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 3403Lubricating preparations containing petroleum oils or oils obtained from bituminous minerals, provided they represent less than 70 % by weightOperations of refining and/or one or more specific process(es) (1)

or

Other operations in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product
3404Artificial waxes and prepared waxes:
With a basis of paraffin, petroleum waxes, waxes obtained from bituminous minerals, slack wax or scale wax
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product
Other
Manufacture from materials of any heading, except:

hydrogenated oils having the character of waxes of heading 1516 ;

fatty acids not chemically defined or industrial fatty alcohols having the character of waxes of heading 3823 ;

materials of heading 3404

However, these materials may be used provided their value does not exceed 20 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 35Albuminoidal substances; modified starches; glues; enzymes; except for:Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
3505Dextrins and other modified starches (for example, pregelatinised or esterified starches); glues based on starches, or on dextrins or other modified starches:
Starch ethers and esters
Manufacture from materials of any heading, including other materials of heading 3505Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
Other
Manufacture from materials of any heading, except those of heading 1108Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 3507Prepared enzymes not elsewhere specified or includedManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
Chapter 36Explosives; pyrotechnic products; matches; pyrophoric alloys; certain combustible preparationsManufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 37Photographic or cinematographic goods; except for:Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
3701Photographic plates and film in the flat, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in the flat, sensitised, unexposed, whether or not in packs:
Instant print film for colour photography, in packs
Manufacture in which all the materials used is classified within a heading other than heading 3701 or 3702 . However, materials from heading 3702 may be used provided their value does not exceed 30 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
Other
Manufacture in which all the materials used are classified within a heading other than heading 3701 or 3702 . However, materials from headings 3701 and 3702 may be used provided their value taken together, does not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
3702Photographic film in rolls, sensitised, unexposed, of any material other than paper, paperboard or textiles; instant print film in rolls, sensitised, unexposedManufacture in which all the materials used are classified within a heading other than heading 3701 or 3702Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
3704Photographic plates, film paper, paperboard and textiles, exposed but not developedManufacture in which all the materials used are classified within a heading other than headings 3701 to 3704Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 38Miscellaneous chemical products; except for:Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 3801
Colloidal graphite in suspension in oil and semi colloidal graphite; carbonaceous pastes for electrodes
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
Graphite in paste form, being a mixture of more than 30 % by weight of graphite with mineral oils
Manufacture in which the value of all the materials of heading 3403 used does not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 3803Refined tall oilRefining of crude tall oilManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 3805Spirits of sulphate turpentine, purifiedPurification by distillation or refining of raw spirits of sulphate turpentineManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 3806Ester gumsManufacture from resin acidsManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 3807Wood pitch (wood tar pitch)Distillation of wood tarManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
3808Insecticides, rodenticides, fungicides, herbicides, anti-sprouting products and plant-growth regulators, disinfectants and similar products, put up in forms or packings for retail sale or as preparations or articles (for example, sulphur-treated bands, wicks and candles, and fly-papers)Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products
3809Finishing agents, dye carriers to accelerate the dyeing or fixing of dyestuffs and other products and preparations (for example, dressings and mordants), of a kind used in the textile, paper, leather or like industries, not elsewhere specified or includedManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products
3810Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding electrodes or rodsManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products
3811Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and other prepared additives, for mineral oils (including gasoline) or for other liquids used for the same purposes as mineral oils:
Prepared additives for lubricating oil, containing petroleum oils or oils obtained from bituminous minerals
Manufacture in which the value of all the materials of heading 3811 used does not exceed 50 % of the ex-works price of the product
Other
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3812Prepared rubber accelerators; compound plasticizers for rubber or plastics, not elsewhere specified or included; anti-oxidising preparations and other compound stabilisers for rubber or plasticsManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3813Preparations and charges for fire-extinguishers; charged fire-extinguishing grenadesManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3814Organic composite solvents and thinners, not elsewhere specified or included; prepared paint or vanish removersManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3818Chemical elements doped for use in electronics, in the form of discs, wafers or similar forms; chemical compounds doped for use in electronicsManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3819Hydraulic brake fluids and other prepared liquids for hydraulic transmission, not containing or containing less than 70 % by weight of petroleum oils or oils obtained from bituminous mineralsManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3820Anti-freezing preparations and prepared de-icing fluidsManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3822Diagnostic or laboratory reagents on a backing and prepared diagnostic or laboratory reagents, whether or not on a backing, other than those of heading 3002 or 3006Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3823Industrial monocarboxylic fatty acids; acid oils from refining; industrial fatty alcohols.
Industrial monocarboxylic fatty acids, acid oils from refining
Manufacture in which all the materials used are classified within a heading other than that of the product
Industrial fatty alcohols
Manufacture from materials of any heading including other materials of heading 3823
3824Prepared binders for foundry moulds or cores; chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included:
The following of this heading:

– –Prepared binders for foundry moulds or cores based on natural resinous products

– –Naphthenic acids, their water insoluble salts and their esters

– –Sorbitol other than that of heading 2905

– –Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines; thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts

– –Ion exchangers

– –Getters for vacuum tubes

– –Alkaline iron oxide for the purification of gas

– –Ammoniacal gas liquors and spent oxide produced in coal gas purification

– –Sulphonaphthenic acids, their water insoluble salts and their esters

– –Fusel oil and Dippel's oil

– –Mixtures of salts having different anions

– –Copying pastes with a basis of gelatine, whether or not on a paper or textile backing
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
Other
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
3901 to 3915Plastics in primary forms, waste, parings and scrap, of plastic; except for headings ex 3907 and 3912 for which the rules are set out below:
Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content
Manufacture in which:

the value of all the materials used does not exceed 50 % of the ex-works price of the product;

the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (5)
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Other
Manufacture in which the value of the materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (5)Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
ex 3907
Copolymer, made from polycarbonate and acrylonitrile-butadiene-styrene copolymer (ABS)
Manufacture in which all the materials used are classified within a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 50 % of the ex-works price of the product (5)
Polyester
Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product and/or manufacture from polycarbonate of tetrabromo-(bisphenol A)
3912Cellulose and its chemical derivatives, not elsewhere specified or included, in primary formsManufacture in which the value of any materials classified in the same heading as the product does not exceed 20 % of the ex-works price of the product
3916 to 3921Semi-manufactures and articles of plastics; except for headings ex 3916 , ex 3917 , ex 3920 and ex 3921 , for which the rules are set out below:
Flat products, further worked than only surface-worked or cut into forms other than rectangular (including square); other products, further worked than only surface-worked
Manufacture in which the value of any materials of Chapter 39 used does not exceed 50 % of the ex-works price of the productManufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Other:
– –Addition homopolymerisation products in which a single monomer contributes more than 99 % by weight to the total polymer content
Manufacture in which:

the value of all the materials used does not exceed 50 % of the ex-works price of the product;

the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (5)
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
– –Other
Manufacture in which the value of any materials of Chapter 39 used does not exceed 20 % of the ex-works price of the product (5)Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
ex 3916 and ex 3917Profile shapes and tubesManufacture in which:

the value of all the materials used does not exceed 50 % of the ex-works price of the product;

the value of any materials classified within the same heading as the product does not exceed 20 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
ex 3920
Ionomer sheet or film
Manufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralised with metal ions, mainly zinc and sodiumManufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Sheets of regenerated cellulose, polyamides or polyethylene
Manufacture in which the value of any materials classified in the same heading as the product does not exceed 20 % of the ex-works price of the product
ex 3921Foils of plastic, metallisedManufacture from highly transparent polyester foils with a thickness of less than 23 micron (6)Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
3922 to 3926Articles of plasticsManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex Chapter 40Rubber and articles thereof; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
ex 4001Laminated slabs of crepe rubber for shoesLamination of sheets of natural rubber
4005Compounded rubber, unvulcanised, in primary forms or in plates, sheets or stripManufacture in which the value of all the materials used, except natural rubber, does not exceed 50 % of the ex-works price of the product
4012Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, interchangeable tyre treads and tyre flaps, of rubber:
Retreaded pneumatic, solid or cushion tyres, of rubber
Retreading of used tyres
Other
Manufacture from materials of any heading, except those of heading 4011 or 4012
ex 4017Articles of hard rubberManufacture from hard rubber
ex Chapter 41Raw hides and skins (other than furskins) and leather; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
ex 4102Raw skins of sheep or lambs, without wool onRemoval of wool from sheep or lamb skins, with wool on
4104 to 4107Leather, without hair or wool, other than leather of heading 4108 or 4109Retanning of pre-tanned leather

or

Manufacture in which all the materials used are classified within a heading other than that of the product
4109Patent leather and patent laminated leather; metallised leatherManufacture from leather of headings 4104 to 4107 provided its value does not exceed 50 % of the ex-works price of the product
Chapter 42Articles of leather; saddlery and harness; travel goods, handbags and similar containers; articles of animal gut (other than silk worm gut)Manufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 43Furskins and artificial fur; manufactures thereof; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
ex 4302Tanned or dressed furskins, assembled:
Plates, crosses and similar forms
Bleaching or dyeing, in addition to cutting and assembly of non-assembled tanned or dressed furskins
Other
Manufacture from non-assembled, tanned or dressed furskins
4303Articles of apparel, clothing accessories and other articles of furskinManufacture from non-assembled tanned or dressed furskins of heading 4302
ex Chapter 44Wood and articles of wood; wood charcoal; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
ex 4403Wood roughly squaredManufacture from wood in the rough, whether or not stripped of its bark or merely roughed down
ex 4407Wood sawn or chipped lengthwise, sliced or peeled, of a thickness exceeding 6 mm, planed, sanded or finger-jointedPlanning, sanding or finger-jointing
ex 4408Veneer sheets and sheets for plywood, of a thickness not exceeding 6 mm, spliced, and other wood sawn lengthwise, sliced or peeled of a thickness not exceeding 6 mm, planed, sanded or finger-jointedSplicing, planning, sanding or finger-jointing
ex 4409Wood continuously shaped along any of its edges or faces, whether or not planed, sanded or finger-jointed:
Sanded or finger-jointed
Sanding or finger-jointing
Beadings and mouldings
Beading or moulding
ex 4410 to ex 4413Beadings and mouldings, including moulded skirting and other moulded boardsBeading or moulding
ex 4415Packing cases, boxes, crates, drums and similar packings, of woodManufacture from boards not cut to size
ex 4416Casks, barrels, vats, tubs and other coopers' products and parts thereof, of woodManufacture from riven staves, not further worked than sawn on the two principal surfaces
ex 4418
Builders' joinery and carpentry of wood
Manufacture in which all the materials used are classified within a heading other than that of the product. However, cellular wood panels, shingles and shakes may be used
Beadings and mouldings
Beading or moulding
ex 4421Match splints; wooden pegs or pins for footwearManufacture from wood of any heading except drawn wood of heading 4409
ex Chapter 45Cork and articles of cork; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
4503Articles of natural corkManufacture from cork of heading 4501
Chapter 46Manufactures of straw, of esparto or of other plaiting materials; basket ware and wickerworkManufacture in which all the materials used are classified within a heading other than that of the product
Chapter 47Pulp of wood or of other fibrous cellulosic material; recovered (waste and scrap) paper or paperboardManufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 48Paper and paperboard; articles of paper pulp, of paper or of paperboard; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
ex 4811Paper and paperboard, ruled, lined or squared onlyManufacture from paper-making materials of Chapter 47
4816Carbon paper, self-copy paper and other copying or transfer papers (other than those of heading 4809 ), duplicator stencils and offset plates, of paper, whether or not put up in boxesManufacture from paper-making materials of Chapter 47
4817Envelopes, letter cards, plain postcards and correspondence cards, of paper or paperboard; boxes, pouches, wallets and writing compendiums, of paper or paperboard, containing an assortment of paper stationeryManufacturing in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 4818Toilet paperManufacture from paper-making materials of Chapter 47
ex 4819Cartons, boxes, cases, bags and other packing containers, of paper, paperboard, cellulose wadding or webs of cellulose fibresManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 4820Letter padsManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 4823Other paper, paperboard, cellulose wadding and webs of cellulose fibres, cut to size or shapeManufacture from paper-making materials of Chapter 47
ex Chapter 49Printed books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
4909Printed or illustrated postcards; printed cards bearing personal greetings, messages or announcements, whether or not illustrated, with or without envelopes or trimmingsManufacture from materials not classified within heading 4909 or 4911
4910Calendars of any kind, printed, including calendar blocks:
Calendars of the ‘perpetual’ type or with replaceable blocks mounted on bases other than paper or paperboard
Manufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 50 % of the ex-works price of the product
Other
Manufacture from materials not classified in heading 4909 or 4911
ex Chapter 50Silk; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
ex 5003Silk waste (including cocoons unsuitable for reeling, yarn waste and garneted stock), carded or combedCarding or combing of silk waste
5004 to ex 5006Silk yarn and yarn spun from silk wasteManufacture from (7):

raw silk or silk waste carded or combed or otherwise prepared for spinning,

other natural fibres not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper-making materials
5007Woven fabrics of silk or of silk waste:Manufacture from yarn (7)Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
ex Chapter 51Wool, fine or coarse animal hair; horsehair yarn and woven fabric; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
5106 to 5110Yarn of wool, of fine or coarse animal hair or of horsehairManufacture from (7):

raw silk or silk waste carded or combed or otherwise prepared for spinning,

natural fibres not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper-making materials
5111 to 5113Woven fabrics of wool, of fine or coarse animal hair or of horsehair:Manufacture from yarn (7)Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
ex Chapter 52Cotton; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
5204 to 5207Yarn and thread of cottonManufacture from (7):

raw silk or silk waste carded or combed or otherwise prepared for spinning,

natural fibres not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper-making materials
5208 to 5212Woven fabrics of cotton:Manufacture from yarn (7)Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
ex Chapter 53Other vegetable textile fibres; paper yarn and woven fabrics of paper yarn; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
5306 to 5308Yarn of other vegetable textile fibres; paper yarnManufacture from (7):

raw silk or silk waste carded or combed or otherwise prepared for spinning,

natural fibres not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper-making materials
5309 to 5311Woven fabrics of other vegetable textile fibres; woven fabrics of paper yarn:Manufacture from yarn (7)Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
5401 to 5406Yarn, monofilament and thread of man-made filamentsManufacture from (7):

raw silk or silk waste carded or combed or otherwise prepared for spinning,

natural fibres not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper-making materials
5407 and 5408Woven fabrics of man-made filament yarn:Manufacture from yarn (7)Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
5501 to 5507Man-made staple fibresManufacture from chemical materials or textile pulp
5508 to 5511Yarn and sewing thread of man-made staple fibresManufacture from (7):

raw silk or silk waste carded or combed or otherwise prepared for spinning,

natural fibres not carded or combed or otherwise prepared for spinning,

chemical materials or textile pulp, or

paper-making materials
5512 to 5516Woven fabrics of man-made staple fibres:Manufacture from yarn (7)Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
ex Chapter 56Wadding, felt and non-wovens; special yarns; twine, cordage, ropes and cables and articles thereof; except for:Manufacture from (7):

coir yarn,

natural fibres,

chemical materials or textile pulp, or

paper making materials
5602Felt, whether or not impregnated, coated, covered or laminated:
Needle loom felt
Manufacture from (7):

natural fibres,

chemical materials or textile pulp
Other
Manufacture from (7):

natural fibres,

man-made staple fibres, or

chemical materials or textile pulp
5604Rubber thread and cord, textile covered; textile yarn, and strip and the like of heading 5404 or 5405 , impregnated, coated, covered or sheathed with rubber or plastics:
Rubber thread and cord, textile covered
Manufacture from rubber thread or cord, not textile covered
Other
Manufacture from (7):

natural fibres not carded or combed or otherwise processed for spinning,

chemical materials or textile pulp, or

paper-making materials
5605Metallised yarn, whether or not gimped, being textile yarn, or strip or the like of heading 5404 or 5405 , combined with metal in the form of thread, strip or powder or covered with metalManufacture from (7):

natural fibres,

man-made staple fibres not carded or combed or otherwise processed for spinning,

chemical materials or textile pulp, or

paper-making materials
5606Gimped yarn, and strip and the like of heading 5404 or 5405 , gimped (other than those of heading 5605 and gimped horsehair yarn); chenille yarn (including flock chenille yarn; loop wale-yarnManufacture from (7):

natural fibres,

man-made staple fibres not carded or combed or otherwise processed for spinning,

chemical materials or textile pulp, or

paper-making materials
Chapter 57Carpets and other textile floor coverings:
Of needle loom felt
Manufacture from (7):

natural fibres, or

chemical materials or textile pulp

However jute fabric may be used as backing
Of other felt
Manufacture from (7):

natural fibres not carded or combed or otherwise processed for spinning, or

chemical materials or textile pulp
Other
Manufacture from yarn (7).

However jute fabric may be used as backing
ex Chapter 58Special woven fabrics; tufted textile fabrics; lace; tapestries; trimmings; embroidery; except for:Manufacture from yarn (7)Printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
5805Hand-woven tapestries of the types gobelins, Flanders, aubusson, Beauvais and the like, and needle-worked tapestries (for example, petit point, cross stitch), whether or not made upManufacture in which all the materials used are classified within a heading other than that of the product
5810Embroidery in the piece, in strips or in motifsManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
5901Textile fabrics coated with gum or amylaceous substances, of a kind used for the outer covers of books or the like; tracing cloth; prepared painting canvas; buckram and similar stiffened textile fabrics of a kind used for hat foundationsManufacture from yarn
5902Tyre cord fabric of high tenacity yarn of nylon or other polyamides, polyesters or viscose rayon:Manufacture from yarn
5903Textile fabrics impregnated, coated, covered or laminated with plastics, other than those of heading 5902Manufacture from yarnPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, razing, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
5904Linoleum, whether or not cut to shape; floor coverings consisting of a coating or covering applied on a textile backing, whether or not cut to shapeManufacture from yarn (7)
5905Textile wall coverings:Manufacture from yarnPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
5906Rubberised textile fabrics, other than those of heading 5902 :Manufacture from yarn
5907Textile fabrics otherwise impregnated, coated or covered; painted canvas being theatrical scenery, studio back-cloths or the likeManufacture from yarnPrinting accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, razing, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted fabric used does not exceed 47,5 % of the ex-works price of the product
5908Textile wicks, woven, plaited or knitted, for lamps, stoves, lighters, candles or the like; incandescent gas mantles and tubular knitted gas mantle fabric therefore, whether or not impregnated:
Incandescent gas mantles, impregnated
Manufacture from tubular knitted gas mantle fabric
Other
Manufacture in which all the materials used are classified within a heading other than that of the product
5909 to 5911Textile articles of a kind suitable for industrial use:
Polishing discs or rings other than of felt of heading 5911
Manufacture from yarn or waste fabrics or rags of heading 6310
Woven fabrics, of a kind commonly used in papermaking or other technical uses, felted or not, whether or not impregnated or coated, tubular or endless with single or multiple warp and/or weft, or flat woven with multiple warp and/or weft of heading 5911
Manufacture from yarn (7):
Other
Manufacture from yarn (7):
Chapter 60Knitted or crocheted fabricsManufacture from yarn (7):
Chapter 61Articles of apparel and clothing accessories, knitted or crocheted:
Obtained by sewing together or otherwise assembling, two or more pieces of knitted or crocheted fabric which have been either cut to form or obtained directly to form
Manufacture from fabric
Other
Manufacture from yarn (7):
ex Chapter 62Articles of apparel and clothing accessories, not knitted or crocheted; except for:Manufacture from fabric
6213 and 6214Handkerchiefs, shawls, scarves, mufflers, mantillas, veils and the like:
Embroidered
Manufacture from yarn (7)  (8)Manufacture from unembroidered fabric provided the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product (7)
Other
Manufacture from yarn (7)  (8)Making up followed by printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendaring, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling) where the value of the unprinted goods of headings 6213 and 6214 used does not exceed 47,5 % of the ex-works price of the product
6217Other made-up clothing accessories; parts of garments or of clothing accessories, other than those of heading 6212 :
Embroidered
Manufacture from yarn (7)Manufacture from unembroidered fabric provided the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product (7)
Fire-resistant equipment of fabric covered with foil of aluminised polyester
Manufacture from yarn (7)Manufacture from uncoated fabric provided the value of the uncoated fabric used does not exceed 40 % of the ex-works price of the product (7)
Interlinings for collars and cuffs, cut out
Manufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 63Other made-up textile articles; sets; worn clothing and worn textile articles; rags; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
6301 to 6304Blankets, travelling rugs, bed linen, etc.; curtains etc.; other furnishing articles:
Of felt, of non-wovens
Manufacture from (7):

fibres, or

chemical materials or textile pulp
Other:
– –Embroidered
Manufacture from yarn (8)  (9)Manufacture from unembroidered fabric (other than knitted or crocheted) provided the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product
– –Other
Manufacture from yarn (7)  (8)
6305Sacks and bags, of a kind used for the packing of goodsManufacture from yarn (7):
6306Tarpaulins, awnings and sunblinds; tents; sails for boats, sailboards or land craft; camping goods:Manufacture from fabric
6307Other made-up articles, including dress patternsManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
6308Sets consisting of woven fabric and yarn, whether or not with accessories, for making up into rugs, tapestries, embroidered tablecloths or serviettes, or similar textile articles, put up in packings for retail saleEach item in the set must satisfy the rule which would apply to it if it were not included in the set. However, non-originating articles may be incorporated provided their total value does not exceed 25 % of the ex-works price of the set
ex Chapter 64Footwear, gaiters and the like; except for:Manufacture from materials of any heading except for assemblies of uppers affixed to inner soles or to other sole components of heading 6406
6406Parts of footwear (including uppers whether or not attached to soles other than outer soles); removable in-soles, heel cushions and similar articles; gaiters, leggings and similar articles, and parts thereofManufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 65Headgear and parts thereof, except for:Manufacture in which all the materials used are classified within a heading other than that of the product
6503Felt hats and other felt headgear, made from the hat bodies, hoods or plateaux of heading 6501 , whether or not lined or trimmedManufacture from yarn or textile fibres (8)
6505Hats and other headgear, knitted or crocheted, or made up from lace, felt or other textile fabric, in the piece (but not in strips), whether or not lined or trimmed; hair-nets of any material, whether or not lined or trimmedManufacture from yarn or textile fibres (8)
ex Chapter 66Umbrellas, sun umbrellas, walking-sticks, seat-sticks, whips, riding-crops, and parts thereof; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
6601Umbrellas and sun umbrellas (including walking-stick umbrellas, garden umbrellas and similar umbrellas)Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
Chapter 67Prepared feathers and down and articles made of feathers or of down; artificial flowers; articles of human hairManufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 68Articles of stone, plaster, cement, asbestos, mica or similar materials; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
ex 6803Articles of slate or of agglomerated slateManufacture from worked slate
ex 6812Articles of asbestos; articles of mixtures with a basis of asbestos or of mixtures with a basis of asbestos and magnesium carbonateManufacture from materials of any heading
ex 6814Articles of mica, including agglomerated or reconstituted mica, on a support of paper, paperboard or other materialsManufacture from worked mica (including agglomerated or reconstituted mica)
Chapter 69Ceramic productsManufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 70Glass and glassware; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
ex 7003 , ex 7004 and ex 7005Glass with a non-reflecting layerManufacture from materials of heading 7001
7006Glass of heading 7003 , 7004 or 7005 , bent, edge worked, engraved, drilled, enamelled or otherwise worked, but not framed or fitted with other materials:
glass plate substrate coated with dielectric thin film, semi conductor grade, in accordance with SEMII standards (10)
Manufacture from non-coated glass plate substrate of heading 7006
other
Manufacture from materials of heading 7001
7007Safety glass, consisting of toughened (tempered) or laminated glassManufacture from materials of heading 7001
7008Multiple-walled insulating units of glassManufacture from materials of heading 7001
7009Glass mirrors, whether or not framed, including rear-view mirrorsManufacture from materials of heading 7001
7010Carboys, bottles, flasks, jars, pots, phials, ampoules and other containers, of glass, of a kind used for the conveyance or packing of goods; preserving jars of glass; stoppers, lids and other closures, of glassManufacture in which all the materials used are classified within a heading other than that of the product

or

Cutting of glassware, provided the value of the uncut glassware does not exceed 50 % of the ex-works price of the product
7013Glassware of a kind used for table, kitchen, toilet, office, indoor decoration or similar purposes (other than that of heading 7010 or 7018 )Manufacture in which all the materials used are classified within a heading other than that of the product

or

Cutting of glassware, provided the value of the uncut glassware does not exceed 50 % of the ex-works price of the product

or

Hand-decoration (with the exception of silk-screen printing) of hand-blown glassware, provided the value of the hand-blown glassware does not exceed 50 % of the ex-works price of the product
ex 7019Articles (other than yarn) of glass fibresManufacture from:

uncoloured slivers, rovings, yarn or chopped strands, or

glass wool
ex Chapter 71Natural or cultured pearls, precious or semi precious stones, precious metals, metals clad with precious metal, and articles thereof; imitation jewellery; coin; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
ex 7101Natural or cultured pearls, graded and temporarily strung for convenience of transportManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 7102 , ex 7103 and ex 7104Worked precious or semi precious stones (natural, synthetic or reconstructed)Manufacture from unworked precious or semi precious stones
7106 , 7108 and 7110Precious metals:
Unwrought
Manufacture from materials not classified within heading 7106 , 7108 or 7110

or

Electrolytic, thermal or chemical separation of precious metals of heading 7106 , 7108 or 7110

or

Alloying of precious metals of heading 7106 , 7108 or 7110 with each other or with base metals
Semi-manufactured or in powder form
Manufacture from unwrought precious metals
ex 7107 , ex 7109 and ex 7111Metals clad with precious metals, semi manufacturedManufacture from metals clad with precious metals, unwrought
7116Articles of natural or cultured pearls, precious or semi precious stones (natural, synthetic or reconstructed)Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
7117Imitation jewelleryManufacture in which all the materials used are classified within a heading other than that of the product

or

Manufacture from base metal parts, not plated or covered with precious metals, provided the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex Chapter 72Iron and steel; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
7207Semi-finished products of iron or non-alloy steelManufacture from materials of heading 7201 , 7202 , 7203 , 7204 or 7205
7208 to 7216Flat-rolled products, bars and rods, angles, shapes and sections of iron or non-alloy steelManufacture from ingots or other primary forms of heading 7206
7217Wire of iron or non-alloy steelManufacture from semi finished materials of heading 7207
ex 7218 , 7219 to 7222Semi-finished products, flat-rolled products, bars and rods, angles, shapes and sections of stainless steelManufacture from ingots or other primary forms of heading 7218
7223Wire of stainless steelManufacture from semi finished materials of heading 7218
ex 7224 , 7225 to 7228Semi-finished products, flat-rolled products, hot-rolled bars and rods, in irregularly wound coils; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or non-alloy steelManufacture from ingots or other primary forms of heading 7206 , 7218 or 7224
7229Wire of other alloy steelManufacture from semi finished materials of heading 7224
ex Chapter 73Articles of iron or steel; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
ex 7301Sheet pilingManufacture from materials of heading 7206
7302Railway or tramway track construction materials of iron or steel, the following: rails, checkrails and rack rails, switch blades, crossing frogs, point rods and other crossing pieces, sleepers (cross-ties), fish-plates, chairs, chair wedges, sole pates (base plates), rail clips, bedplates, ties and other material specialised for jointing or fixing railsManufacture from materials of heading 7206
7304 , 7305 and 7306Tubes, pipes and hollow profiles, of iron (other than cast iron) or steelManufacture from materials of heading 7206 , 7207 , 7218 or 7224
ex 7307Tube or pipe fittings of stainless steel (ISO No X5CrNiMo 1712), consisting of several partsTurning, drilling, reaming, threading, deburring and sandblasting of forged blanks the value of which does not exceed 35 % of the ex-works price of the product
7308Structures (excluding prefabricated buildings of heading 9406 ) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frame-works, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steelManufacture in which all the materials used are classified within a heading other than that of the product. However, welded angles, shapes and sections of heading 7301 may not be used
ex 7315Skid chainManufacture in which the value of all the materials of heading 7315 used does not exceed 50 % of the ex-works price of the product
ex Chapter 74Copper and articles thereof; except for:Manufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 50 % of the ex-works price of the product
7401Copper mattes; cement copper (precipitated copper)Manufacture in which all the materials used are classified within a heading other than that of the product
7402Unrefined copper; copper anodes for electrolytic refiningManufacture in which all the materials used are classified within a heading other than that of the product
7403Refined copper and copper alloys, unwrought:
Refined copper
Manufacture in which all the materials used are classified within a heading other than that of the product
Copper alloys and refined copper containing other elements
Manufacture from refined copper, unwrought, or waste and scrap of copper
7404Copper waste and scrapManufacture in which all the materials used are classified within a heading other than that of the product
7405Master alloys of copperManufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 75Nickel and articles thereof; except for:Manufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 50 % of the ex-works price of the product
7501 to 7503Nickel mattes, nickel oxide sinters and other intermediate products of nickel metallurgy; unwrought nickel; nickel waste and scrapManufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 76Aluminium and articles thereof; except for:Manufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 50 % of the ex-works price of the product
7601Unwrought aluminiumManufacture in which:

all the materials used are classified within a heading other than that of the product; and

the value of all the materials used does not exceed 50 % of the ex-works price of the product

or

Manufacture by thermal or electrolytic treatment from unalloyed aluminium or waste and scrap of aluminium
7602Aluminium waste or scrapManufacture in which all the materials used are classified within a heading other than that of the product
ex 7616Aluminium articles other than gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, and expanded metal of aluminiumManufacture in which:

all the materials used are classified within a heading other than that of the product. However, gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands) of aluminium wire, or expanded metal of aluminium may be used;

the value of all the materials used does not exceed 50 % of the ex-works price of the product
Chapter 77Reserved for possible future use in HS
ex Chapter 78Lead and articles thereof; except for:Manufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 50 % of the ex-works price of the product
7801Unwrought lead:
Refined lead
Manufacture from ‘bullion’ or ‘work’ lead
Other
Manufacture in which all the materials used are classified within a heading other than that of the product. However, waste and scrap of heading 7802 may not be used
7802Lead waste and scrapManufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 79Zinc and articles thereof; except for:Manufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 50 % of the ex-works price of the product
7901Unwrought zincManufacture in which all the materials used is classified within a heading other than that of the product. However, waste and scrap of heading 7902 may not be used
7902Zinc waste and scrapManufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 80Tin and articles thereof; except for:Manufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 50 % of the ex-works price of the product
8001Unwrought tinManufacture in which all the materials used is classified within a heading other than that of the product. However, waste and scrap of heading 8002 may not be used
8002 and 8007Tin waste and scrap; other articles of tinManufacture in which all the materials used are classified within a heading other than that of the product
Chapter 81Other base metals; cermets; articles thereof:
Other base metals, wrought; articles thereof
Manufacture in which the value of all the materials classified within the same heading as the product used does not exceed 50 % of the ex-works price of the product
Other
Manufacture in which all the materials used are classified within a heading other than that of the product
ex Chapter 82Tools, implements, cutlery, spoons and forks, of base metal; parts thereof of base metal; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
8206Tools of two or more of the headings 8202 to 8205 , put up in sets for retail saleManufacture in which all the materials used are classified within a heading other than headings 8202 to 8205 . However, tools of headings 8202 to 8205 may be incorporated into the set provided their value does not exceed 15 % of the ex-works price of the set
8207Interchangeable tools for hand tools, whether or not power-operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning, or screw driving), including dies for drawing or extruding metal, and rock drilling or earth boring toolsManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
8208Knives and cutting blades, for machines or for mechanical appliancesManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 8211Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208Manufacture in which all the materials used is classified within a heading other than that of the product. However, knife blades and handles of base metal may be used
8214Other articles of cutlery (for example, hair clippers, butchers' or kitchen cleavers, choppers and mincing knives, paper knives); manicure or pedicure sets and instruments (including nail files)Manufacture in which all the materials used is classified within a heading other than that of the product. However, handles of base metal may be used
8215Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tablewareManufacture in which all the materials used is classified within a heading other than that of the product. However, handles of base metal may be used
ex Chapter 83Miscellaneous articles of base metal; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
ex 8302Other mountings, fittings and similar articles suitable for buildings, and automatic door closersManufacture in which all the materials used is classified within a heading other than that of the product. However, the other materials of heading 8302 may be used provided their value does not exceed 20 % of the ex-works price of the product
ex 8306Statuettes and other ornaments, of base metalManufacture in which all the materials used is classified within a heading other than that of the product. However, the other materials of heading 8306 may be used provided their value does not exceed 30 % of the ex-works price of the product
ex Chapter 84Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof; except for:Manufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex 8401Nuclear fuel elementsManufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the final product
8402Steam or other vapour generating boilers (other than central heating hot water boilers capable also of producing low pressure steam); super heated water boilersManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8403 and ex 8404Central heating boilers other than those of heading 8402 and auxiliary plant for central heating boilersManufacture in which all the materials used are classified within a heading other than heading 8403 or 8404Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8406Steam turbines and other vapour turbinesManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8407Spark-ignition reciprocating or rotary internal combustion piston enginesManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8408Compression-ignition internal combustion piston engines (diesel or semi diesel engines)Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8409Parts suitable for use solely or principally with the engines of heading 8407 or 8408Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8411Turbo-jets, turbo propellers and other gas turbinesManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8412Other engines and motorsManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 8413Rotary positive displacement pumpsManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
ex 8414Industrial fans, blowers and the likeManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8415Air conditioning machines, comprising a motor-driven fan and elements for changing the temperature and humidity, including those machines in which the humidity cannot be separately regulatedManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8418Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps other than air conditioning machines of heading 8415Manufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product;

the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
ex 8419Machines for wood, paper pulp and paperboard industriesManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8420Calendaring or other rolling machines, other than for metals or glass, and cylinders thereforManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8423Weighing machinery (excluding balances of a sensitivity of 5 cg or better), including weight operated counting or checking machines; weighing machine weights of all kindsManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8425 to 8428Lifting, handling, loading or unloading machineryManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where, within the above limit, the materials classified within heading 8431  are only used up to a value of 10 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8429Self-propelled bulldozers, angle dozers, graders, levellers, scrapers, mechanical shovels, excavators, shovel loaders, tamping machines and road rollers:
Road rollers
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
Other
Manufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where, within the above limit, the materials classified within heading 8431  are only used up to a value of 10 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8430Other moving, grading, levelling, scraping, excavating, tamping, compacting, extracting or boring machinery, for earth, minerals or ores; pile-drivers and pile-extractors; snow-ploughs and snow-blowersManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where, within the above limit, the value of the materials classified within heading 8431  are only used up to a value of 10 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex 8431Parts suitable for use solely or principally with road rollersManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8439Machinery for making pulp of fibrous cellulosic material or for making or finishing paper or paperboardManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8441Other machinery for making up paper pulp, paper or paperboard, including cutting machines of all kindsManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where, within the above limit, the materials classified within the same heading as the product are only used up to a value of 25 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8444 to 8447Machines of these headings for use in the textile industryManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 8448Auxiliary machinery for use with machines of headings 8444 and 8445Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8452Sewing machines, other than book-sewing machines of heading 8440 ; furniture, bases and covers specially designed for sewing machines; sewing machine needles:
Sewing machines (lock stitch only) with heads of a weight not exceeding 16 kg without motor or 17 kg with motor
Manufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where the value of all the non-originating materials used in assembling the head (without motor) does not exceed the value of the originating materials used;

the thread tension, crochet and zigzag mechanisms used are already originating
Other
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8456 to 8466Machine-tools and machines and their parts and accessories of headings 8456 to 8466Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8469 to 8472Office machines (for example, typewriters, calculating machines, automatic data processing machines, duplicating machines, stapling machines)Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8480Moulding boxes for metal foundry; mould bases; moulding patterns; moulds for metal (other than ingot moulds), metal carbides, glass, mineral materials, rubber or plasticsManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
8482Ball or roller bearingsManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8484Gaskets and similar joints of metal sheeting combined with other material or of two or more layers of metal; sets or assortments of gaskets and similar joints, dissimilar in composition, put up in pouches, envelopes or similar packings; mechanical sealsManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8485Machinery parts, not containing electrical connectors, insulators, coils, contacts or other electrical features, not specified or included elsewhere in this ChapterManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 85Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles; except for:Manufacture in which

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8501Electric motors and generators (excluding generating sets)Manufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where, within the above limit, the materials classified within heading 8503  are only used up to a value of 10 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8502Electric generating sets and rotary convertersManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where, within the above limit, the materials classified within heading 8501 or 8503 , taken together, are only used up to a value of 10 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex 8504Power supply units for automatic data-processing machinesManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 8518Microphones and stands therefore; loudspeakers, whether or not mounted in their enclosures; audio-frequency electric amplifiers; electric sound amplifier setsManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8519Turntables (record-decks), record-players, cassette- players and other sound reproducing apparatus, not incorporating a sound recording deviceManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8520Magnetic tape recorders and other sound recording apparatus, whether or not incorporating a sound reproducing deviceManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8521Video recording or reproducing apparatus, whether or not incorporating a video tunerManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8522Parts and accessories suitable for use solely or principally with the apparatus of headings 8519 to 8521Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8523Prepared unrecorded media for sound recording or similar recording of other phenomena, other than products of Chapter 37Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8524Records, tapes and other recorded media for sound or other similarly recorded phenomena, including matrices and masters for the production of records, but excluding products of Chapter 37:
Matrices and masters for the production of records
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
Other
Manufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where, within the above limit, the materials classified within heading 8523  are only used up to a value of 10 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8525Transmission apparatus for radio-telephony, radio-telegraphy, radio-broadcasting or television, whether or not incorporating reception apparatus or sound recording or reproducing apparatus; television cameras; still image video cameras and other video camera recordersManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8526Radar apparatus, radio navigational aid apparatus and radio remote control apparatusManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8527Reception apparatus for radio-telephony, radio-telegraphy or radio broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clockManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8528Reception apparatus for television, whether or not incorporating radio broadcast receivers or sound or video recording or reproducing apparatus; video monitors and video projectorsManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8529Parts suitable for use solely or principally with the apparatus of headings 8525 to 8528 :
Suitable for use solely or principally with video recording or reproducing apparatus
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
Other
Manufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8535 and 8536Electrical apparatus for switching or protecting electrical circuits, or for making connections to or in electrical circuitsManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where, within the above limit, the materials classified within heading 8538  are only used up to a value of 10 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8537Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536 , for electric control or the distribution of electricity, including those incorporating instruments or apparatus of Chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517Manufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where, within the above limit, the materials classified within heading 8538  are only used up to a value of 10 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex 8541Diodes, transistors and similar semi conductor devices, except wafers not yet cut into chipsManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8542Electronic integrated circuits and micro assembliesManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where, within the above limit, the materials classified within heading 8541 or 8542 , taken together, are only used up to a value of 10 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
8544Insulated (including enamelled or anodised) wire, cable (including coaxial cable) and other insulated electric conductors, whether or not fitted with connectors; optical fibre cables, made up of individually sheathed fibres, whether or not assembled with electric conductors or fitted with connectorsManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8545Carbon electrodes, carbon brushes, lamp carbons, battery carbons and other articles of graphite or other carbon, with or without metal, of a kind used for electrical purposesManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8546Electrical insulators of any materialManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8547Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating materials apart from any minor components of metal (for example, threaded sockets) incorporated during moulding solely for purposes of assembly other than insulators of heading 8546 ; electrical conduit tubing and joints therefore, of base metal lined with insulating materialManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8548Waste and scrap of primary cells, primary batteries and electric accumulators; spent primary cells, spent primary batteries and spent electric accumulators; electrical parts of machinery or apparatus, not specified or included elsewhere in this ChapterManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 86Railway or tramway locomotives, rolling-stock and parts thereof; railway or tramway track fixtures and fittings and parts thereof; mechanical (including electro-mechanical) traffic signalling equipment of all kinds; except for:Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8608Railway or tramway track fixtures and fittings; mechanical (including electro-mechanical) signalling, safety or traffic control equipment for railways, tramways, roads, inland waterways, parking facilities, port installations or airfields; parts of the foregoingManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex Chapter 87Vehicles other than railway or tramway rolling-stock, and parts and accessories thereof; except for:Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8709Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehiclesManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8710Tanks and other armoured fighting vehicles, motorised, whether or not fitted with weapons, and parts of such vehiclesManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8711Motorcycles (including mopeds) and cycles fitted with an auxiliary motor, with or without side-cars; side-cars:
With reciprocating internal combustion piston engine of a cylinder capacity:
– –Not exceeding 50 cc
Manufacture:

in which the value of all the materials used does not exceed 40 % of the ex- works price of the product;

where the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 20 % of the ex-works price of the product
– –Exceeding 50 cc
Manufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
Other
Manufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex 8712Bicycles without ball bearingsManufacture from materials not classified in heading 8714Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8715Baby carriages and parts thereofManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
8716Trailers and semi trailers; other vehicles, not mechanically propelled; parts thereofManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex Chapter 88Aircraft, spacecraft, and parts thereof; except for:Manufacture in which all the materials used are classified within a heading other than that of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 8804RotochutesManufacture from materials of any heading including other materials of heading 8804Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
8805Aircraft launching gear; deck-arrestor or similar gear; ground flying trainers; parts of the foregoing articlesManufacture in which all the materials used are classified within a heading other than that of the productManufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
Chapter 89Ships, boats and floating structuresManufacture in which all the materials used are classified within a heading other than that of the product. However, hulls of heading 8906 may not be usedManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 90Optical, photographic, cinematographic, measuring, checking, precision, medical or surgical instruments and apparatus; parts and accessories thereof; except for:Manufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9001Optical fibres and optical fibre bundles; optical fibre cables other than those of heading 8544 ; sheets and plates of polarising material; lenses (including contact lenses), prisms, mirrors and other optical elements, of any material, unmounted, other than such elements of glass not optically workedManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9002Lenses, prisms, mirrors and other optical elements, of any material, mounted, being parts of or fittings for instruments or apparatus, other than such elements of glass not optically workedManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9004Spectacles, goggles and the like, corrective, protective or otherManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 9005Binoculars, monocular, other optical telescopes, and mountings therefore, except for astronomical refracting telescopes and mountings thereforeManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product;

the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex 9006Photographic (other than cinematographic) cameras; photographic flashlight apparatus and flashbulbs other than electrically ignited flashbulbsManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product;

the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9007Cinematographic cameras and projectors, whether or not incorporating sound recording or reproducing apparatusManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product;

the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9011Compound optical microscopes, including those for photomicrography, cinephotomicrography or micro projectionManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product;

the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
ex 9014Other navigational instruments and appliancesManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9015Surveying (including photogram metrical surveying), hydrographic, oceanographic, hydrological, meteorological or geophysical instruments and appliances, excluding compasses; rangefindersManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9016Balances of a sensitivity of 5 cg or better, with or without weightsManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9017Drawing, marking-out or mathematical calculating instruments (for example, drafting machines, pantographs, protractors, drawing sets, slide rules, disc calculators); instruments for measuring length, for use in the hand (for example, measuring rods and tapes, micrometers, callipers), not specified or included elsewhere in this ChapterManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9018Instruments and appliances used in medical, surgical, dental or veterinary sciences, including scintigraphic apparatus, other electro-medical apparatus and sight-testing instruments:
Dentists' chairs incorporating dental appliances or dentists' spittoons
Manufacture from materials of any heading, including other materials of heading 9018Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
Other
Manufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
9019Mechano-therapy appliances; massage apparatus; psychological aptitude-testing apparatus; ozone therapy, oxygen therapy, aerosol therapy, artificial respiration or other therapeutic respiration apparatusManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
9020Other breathing appliances and gas masks, excluding protective masks having neither mechanical parts nor replaceable filtersManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 25 % of the ex-works price of the product
9024Machines and appliances for testing the hardness, strength, compressibility, elasticity or other mechanical properties of materials (for example, metals, wood, textiles, paper, plastics)Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9025Hydrometers and similar floating instruments, thermometers, pyrometers, barometers, hygrometers and psychrometers, recording or not, and any combination of these instrumentsManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9026Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases (for example, flow meters, level gauges, manometers, heat meters), excluding instruments and apparatus of heading 9014 , 9015 , 9028 or 9032Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9027Instruments and apparatus for physical or chemical analysis (for example, Polari meters, refract meters, spectrometers, gas or smoke analysis apparatus); instruments and apparatus for measuring or checking viscosity, porosity, expansion, surface tension or the like; instruments and apparatus for measuring or checking quantities of heat, sound or light (including exposure meters); microtomesManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9028Gas, liquid or electricity supply or production meters, including calibrating meters therefore:
Parts and accessories
Manufacture in which the value of all the materals used does not exceed 40 % of the ex-works price of the product
Other
Manufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9029Revolution counters, production counters, taximeters, mileometers, pedometers and the like; speed indicators and tachometers, other than those of heading 9014 or 9015 ; stroboscopesManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9030Oscilloscopes, spectrum analysers and other instruments and apparatus for measuring or checking electrical quantities, excluding meters of heading 9028 ; instruments and apparatus for measuring or detecting alpha, beta, gamma, X-ray, cosmic or other ionising radiationsManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9031Measuring or checking instruments, appliances and machines, not specified or included elsewhere in this Chapter; profile projectorsManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9032Automatic regulating or controlling instruments and apparatusManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9033Parts and accessories (not specified or included elsewhere in this Chapter) for machines, appliances, instruments or apparatus of Chapter 90Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex Chapter 91Clocks and watches and parts thereof; except for:Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9105Other clocksManufacture:

in which the value of allthe materials used does not exceed 40 % of the ex-works price of the product;

where the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9109Clock movements, complete and assembledManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where the value of all the non-originating materials used does not exceed the value of the originating materials used
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9110Complete watch or clock movements, unassembled or partly assembled (movement sets); incomplete watch or clock movements, assembled; rough watch or clock movementsManufacture:

in which the value of all the materials used does not exceed 40 % of the ex-works price of the product;

where, within the above limit, the materials classified within heading 9114  are only used up to a value of 10 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9111Watch cases and parts thereofManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9112Clock cases and cases of a similar type for other goods of this Chapter, and parts thereofManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 40 % of the ex-works price of the product
Manufacture in which the value of all the materials used does not exceed 30 % of the ex-works price of the product
9113Watch straps, watch bands and watch bracelets, and parts thereof:
Of base metal, whether or not gold- or silver-plated, or of metal clad with precious metal
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
Other
Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
Chapter 92Musical instruments; parts and accessories of such articlesManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
Chapter 93Arms and ammunition; parts and accessories thereofManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex Chapter 94Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings; except for:Manufacture in which all the materials used are classified within a heading other than that of the productManufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
ex 9401 and ex 9403Base metal furniture, incorporating unstuffed cotton cloth of a weight of 300 g/m2 or lessManufacture in which all the materials used are classified in a heading other than that of the product

or

Manufacture from cotton cloth already made up in a form ready for use of heading 9401 or 9403 , provided:

its value does not exceed 25 % of the ex-works price of the product;

all the other materials used are already originating and are classified in a heading other than heading 9401 or 9403
Manufacture in which the value of all the materials used does not exceed 40 % of the ex-works price of the product
9405Lamps and lighting fittings including searchlights and spotlights and parts thereof, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like, having a permanently fixed light source, and parts thereof not elsewhere specified or includedManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
9406Prefabricated buildingsManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex Chapter 95Toys, games and sports requisites; parts and accessories thereof; except for:Manufacture in which all the materials used are classified within a heading other than that of the product
9503Other toys; reduced-size (‘scale’) models and similar recreational models, working or not; puzzles of all kindsManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 9506Golf clubs and parts thereofManufacture in which all the materials used is classified within a heading other than that of the product. However, roughly shaped blocks for making golf club heads may be used
ex Chapter 96Miscellaneous manufactured articles; except for:Manufacture in which all the materials used is classified within a heading other than that of the product
ex 9601 and ex 9602Articles of animal, vegetable or mineral carving materialsManufacture from ‘worked’ carving materials of the same heading
ex 9603Brooms and brushes (except for besoms and the like and brushes made from marten or squirrel hair), hand-operated mechanical floor sweepers, not motorised, paint pads and rollers, squeegees and mopsManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
9605Travel sets for personal toilet, sewing or shoe or clothes cleaningEach item in the set must satisfy the rule, which would apply to it if it were not included in the set. However, non-originating articles may be incorporated, provided their total value does not exceed 15 % of the ex-works price of the set
9606Buttons, press-fasteners, snap-fasteners and press-studs, button moulds and other parts of these articles; button blanksManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 50 % of the ex-works price of the product
9608Ball-points pens; felt-tipped and other porous-tipped pens and markers; fountain pens, stylograph pens and other pens; duplicating stylos; propelling or sliding pencils; penholders, pencil-holders and similar holders; parts (including caps and clips) of the foregoing articles, other than those of heading 9609Manufacture in which all the materials used are classified within a heading other than that of the product.

However, nibs or nib-points classified within the same heading may be used
9612Typewriter or similar ribbons, inked or otherwise prepared for giving impressions, whether or not on spools or in cartridges; ink-pads, whether or not inked, with or without boxesManufacture in which:

all the materials used are classified within a heading other than that of the product;

the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex 9613Lighters with piezo-igniterManufacture in which the value of all the materials of heading 9613 used does not exceed 30 % of the ex-works price of the product
ex 9614Smoking pipes and pipe bowlsManufacture from roughly shaped blocks
Chapter 97Works of art, collectors' pieces and antiquesManufacture in which all the materials used are classified within a heading other than that of the product



(1) For the special conditions relating to ‘specific processes’ see Introductory Notes 7.1 and 7.3.

(2) For the special conditions relating to ‘specific processes’ see Introductory Note 7.2.

(3) Note 3 to Chapter 32 says that these preparations are those of a kind used for colouring any material or used as ingredients in the manufacture of colouring preparations, provided they are not classified in another heading in Chapter 32.

(4) A ‘group’ is regarded as any part of the heading separated from the rest by a semicolon.

(5) In the case of the products composed of materials classified within both headings 3901 to 3906, on the one hand, and within headings 3907 to 3911, on the other hand, this restriction only applies to that group of materials which predominates by weight in the product.

(6) The following foils shall be considered as highly transparent: foils, the optical dimming of which — measured according to ASTM-D 1003-16 by Gardner Hazemeter (i.e. Hazefactor) — is less than 2 %.

(7) For special conditions relating to products made of a mixture of textile materials, see Introductory Note 5.

(8) See Introductory Note 6.

(9) For knitted or crocheted articles, not elastic or rubberised, obtained by sewing or assembly pieces of knitted or crocheted fabrics (cut out or knitted directly to shape), see Introductory Note 6.

(10) SEMII-Semiconductor Equipment and Materials Institute Incorporated

Appendix 2A

Derogations from the list of working or processing required to be carried out on non-originating materials in order for the product manufactured to acquire originating status, in accordance with article 4 of this annex

The products included in the list may not all be covered by this Regulation. It is therefore necessary to consult the other parts of this Regulation.

Common provisions

1.For the products described in the table below, the following rules may also apply instead of the rules set out in Appendix 2.

2.A proof of origin issued or made out pursuant to this Appendix shall include the following statement in English: ‘Derogation — Appendix 2A of Annex II to Regulation (EU) 2016/1076 — Materials of HS heading … originating from … used.’ This statement shall be contained in box 7 of movement certificate EUR.1 referred to in Article 17 of Annex II to this Regulation, or shall be added to the invoice declaration referred to in Articles 14 and 19 of Annex II to this Regulation.

3.The ACP States and the Member States shall take the measures necessary on their part to implement this Appendix.

HS headingDescription of productWorking or processing, carried out on non-originating materials, which confers originating status
ex Chapter 4Dairy produce,

with a content of materials of Chapter 17 not more than 20 % by weight
Manufacture in which all the materials of Chapter 4 used are wholly obtained
Chapter 6Live trees and other plants; bulbs, roots and the like; cut flowers and ornamental foliageManufacture in which all the materials of Chapter 6 used are wholly obtained
ex Chapter 8Edible fruit and nuts; peel of citrus fruits or melons,

with a content of materials of Chapter 17 not more than 20 % by weight
Manufacture in which all the materials of Chapter 8 used are wholly obtained
1101Wheat or meslin flourManufacture from materials of any heading except that of the product
Chapter 12Oil seed, oleaginous fruits; miscellaneous grain, seed, fruit; industrial or medical plants; straw and fodderManufacture from materials of any heading except that of the product
1301Lac; natural gums, resins, gum-resins and oleoresins (for example, balsams)Manufacture in which the value of all the materials of heading 1301 used does not exceed 60 % of the ex-works price of the product
ex 1302Vegetable saps and extracts; pectics substances, pectinates and pectates; agar-agar and other mucilages and thickeners, whether or not modified, derived from vegetable products:

other than mucilages and thickeners, modified, derived from vegetable products
Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product
ex 1506Other animal fats and oils and their fractions, whether or not refined, but not chemically modified;

other than solid fractions
Manufacture from materials of any heading except that of the product
ex 1507 to ex 1515Vegetable oils and their fractions:
Soya, ground nut, palm, copra, palm kernel, babassu, tung and oiticica oil, myrtle wax and Japan wax, fractions of jojoba oil and oils for technical or industrial uses other than the manufacture of foodstuffs for human consumption
Manufacture from materials of any subheading except that of the product
other than olive oils under headings 1509 and 1510
Manufacture from materials of any heading except that of the product
ex 1516Animal or vegetable fats and oils and their fractions, partly or wholly hydrogenated, inter-esterified, re-esterified or elaidinised, whether or not refined, but not further prepared:

fats and oils and their fractions of hydrogenated castor oil, so called ‘opal wax’
Manufacture from materials classified in a heading other than that of the product
ex Chapter 18Cocoa and cocoa preparations,

with a content of materials of Chapter 17 not more than 20 % by weight
Manufacture from materials of any heading, except that of the product
ex 1901Food preparations of flour, groats, meal, starch or malt extract, not containing cocoa in more than 40 % by weight calculated on a totally defatted basis, not elsewhere specified or included; food preparations of goods of heading 0401 to 0404 , not containing cocoa in more than 5 % by weight calculated on a totally defatted basis, not elsewhere specified or included.

with a content of materials of Chapter 17 not more than 20 % by weight
Manufacture from materials of any heading, except that of the product
1902Pasta, whether or not cooked or stuffed (with meat or other substances) or otherwise prepared, such as spaghetti, macaroni, noodles, lasagne, gnocchi, ravioli, cannelloni; couscous, whether or not prepared
containing 20 % or less by weight of meat, meat offal, fish, crustaceans or molluscs
Manufacture in which all the products of Chapter 11 used are originating
containing more than 20 % by weight of meat, meat offal, fish, crustaceans or molluscs
Manufacture in which:

all the products of Chapter 11 used are originating,

all the materials of Chapters 2 and 3 used are wholly obtained
1903Tapioca and substitutes thereof prepared from starch, in the form of flakes, grains, pearls, sifting or similar forms:

with a content of materials of heading 1108 13 (potato starch) not more than 20 % by weight
Manufacture from materials of any heading, except that of the product
1904Prepared foods obtained by the swelling or roasting of cereals or cereal products (for example, corn flakes); cereals (other than maize (corn)) in grain form or in the form of flakes or other worked grains (except flour, groats and meal), pre-cooked or otherwise prepared, not elsewhere specified or included:

with a content of materials of Chapter 17 not more than 20 % by weight
Manufacture:

from materials of any heading, except those of heading 1806,

in which all the products of Chapter 11 used are originating
1905Bread, pastry, cakes, biscuits and other bakers' wares, whether or not containing cocoa; communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar productsManufacture in which all the products of Chapter 11 used are originating
ex Chapter 20Preparations of vegetables, fruit, nuts or other parts of plants:

from materials other than those of subheading 0711 51

from materials other than of headings 2002 , 2003 , 2008 and 2009

with a content of materials of Chapter 17 not more than 20 % by weight
Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product
ex Chapter 21Miscellaneous edible preparations:

with a content of materials of Chapters 4 and 17 not more than 20 % by weight
Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product
ex Chapter 23Residues and waste from the food industries; prepared animal fodder:

with a content of maize or materials of Chapters 2, 4 and 17 not more than 20 % by weight
Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product

Appendix 3

Form for movement certificate EUR.1

1.Movement certificates EUR.1 shall be made out on the form of which a specimen appears in this Appendix. This form shall be printed in one or more of the languages in which this Regulation is drawn up. Certificates shall be made out in one of these languages and in accordance with the provisions of the domestic law of the exporting State; if they are handwritten, they shall be completed in ink and in capital letters.

2.Each certificate shall measure 210 × 297 mm, a tolerance of up to plus 8 mm or minus 5 mm in the length may be allowed. The paper used must be white, sized for writing, not containing mechanical pulp and weighing not less than 25 g/m2. It shall have a printed green guilloche pattern background making any falsification by mechanical or chemical means apparent to the eye.

3.The exporting States may reserve the right to print the certificates themselves or may have them printed by approved printers. In the latter case each certificate must include a reference to such approval. Each certificate must bear the name and address of the printer or a mark by which the printer can be identified. It shall also bear a serial number, either printed or not, by which it can be identified.


Text of image

MOVEMENT CERTIFICATE

1. Exporter (name, full address, country)

EUR.1 No A 000.000

See notes overleaf before completing this form

2. Certificate used in preferential trade between

3. Consignee (name, full address, country) (Optional)

and

(insert appropriate countries, groups of countries or territories)

4. Country, group of countries or territory in which the products are considered as originating

5. Country, group of countries or territory of destination

6. Transport details (Optional)

7. Remarks

8. Item number; Marks and numbers; Number and kind of packages (1); Description of goods

9. Gross mass (kg) or other measure (litres, m3, etc.)

10. Invoices (Optional)

11. CUSTOMS ENDORSEMENT

Declaration certified

Export document (2)

Form No

Customs office

Issuing country or territory

Date

(Signature)

Stamp

12. DECLARATION BY THE EXPORTER

I, the undersigned, declare that the goods described above meet the conditions required for the issue of this certificate.

Place and date

(Signature)

(1) If goods are not packed, indicate number of articles or state ‘in bulk’ as appropriate

(2) Complete only where the regulations of the exporting country or territory require



Text of image

13. Request for verification, to:

14. Result of verification

Verification carried out shows that this certificate (*)

was issued by the customs office indicated and that the information contained therein is accurate.

does not meet the requirements as to authenticity and accuracy (see remarks appended).

Verification of the authenticity and accuracy of this certificate is requested

(Place and date)

Stamp

(Signature)

(Place and date)

Stamp

(Signature)

(*) Insert X in the appropriate box.

NOTES

1. Certificates must not contain erasures or words written over one another. Any alterations must be made by deleting the incorrect particulars and adding any necessary corrections. Any such alteration must be initialled by the person who completed the certificate and endorsed by the customs authorities of the issuing country or territory.

2. No spaces must be left between the items entered on the certificate and each item must be preceeded by an item number. A horizontal line must be drawn immediately below the last item. Any unused space must be struck through in such a manner as to make any later additions impossible.

3. Goods must be described in accordance with commercial practice and with sufficent detail to enable them to be identified.



Text of image

APPLICATION FOR A MOVEMENT CERTIFICATE

1. Exporter (name, full address, country)

EUR.1 No A 000.000

See notes overleaf before completing this form

2. Application for a certificate to be used in preferential trade between

3. Consignee (name, full address, country) (Optional)

and

(insert appropriate countries or groups of countries or territories)

4. Country, group of countries or territory in which the products are considered as originating

5. Country, group of countries or territory of destination

6. Transport details (Optional)

7. Remarks

8. Item number; Marks, numbers; Number and kind of packages (1); Description of goods

9. Gross mass (kg) or other measure (litres, m3, etc.)

10. Invoices (Optional)

(1) If goods are not packed, indicate number of articles or state ‘in bulk’ as appropriate



Text of image

DECLARATION BY THE EXPORTER

I, the undersigned, exporter of the goods described overleaf,

DECLARE

that the goods meet the conditions required for the issue of the attached certificate;

SPECIFY

as follows the circumstances which have enabled these goods to meet the above conditions:

SUBMIT

the following supporting documents (1)

UNDERTAKE

to submit, at the request of the appropriate authorities, any supporting evidence which these authorities may require for the purpose of issuing the attached certificate, and undertake, if required, to agree to any inspection of my accounts and to any check on the processes of manufacture of the above goods, carried out by the said authorities;

REQUEST

the issue of the attached certificate for these goods.

(Place and date)

(Signature)

(1) For example, import documents, movement certificates, manufacturer's declarations, etc. referring to the products used in manufacture or to the goods re-exported in the same state.

Appendix 4

Invoice declaration

The invoice declaration, the text of which is given below, must be made out in accordance with the footnotes. However, the footnotes do not have to be reproduced.

Bulgarian version

Износителят на продуктите, обхванати от този документ (митническо разрешение № … (1)) декларира, че освен кьдето ясно е отбелязано друго, тези продукти са с … преференциален произход … (2).

Spanish version

El exportador de los productos incluidos en el presente documento (autorización aduanera no … (1)) declara que, salvo indicación expresa en sentido contrario, estos productos gozan de un origen preferencial … (2).

Czech version

Vývozce výrobků uvedených v tomto dokumentu (číslo povolení … (1)) prohlašuje, že kromě zřetelně označených mají tyto výrobky preferenční původ v … (2).

Danish version

Eksportøren af varer, der er omfattet af nærværende dokument, (toldmyndighedernes tilladelse nr. … (1)), erklærer, at varerne, medmindre andet tydeligt er angivet, har præferenceoprindelse i … (2).

German version

Der Ausführer (Ermächtigter Ausführer; Bewilligungs-Nr. … (1)) der Waren, auf die sich dieses Handelspapier bezieht, erklärt, dass diese Waren, soweit nicht anders angegeben, präferenzbegünstigte … (2) Ursprungswaren sind.

Estonian version

Käesoleva dokumendiga hõlmatud toodete eksportija (tolli luba nr … (1)) deklareerib, et need tooted on … (2) sooduspäritoluga, välja arvatud juhul, kui on selgelt näidatud teisiti.

Greek version

Ο εξαγωγέας των προϊόντων που καλύπτονται από το παρόν έγγραφο (άδεια τελωνείου υπ'αριθ. … (1)) δηλώνει ότι, εκτός εάν δηλώνεται σαφώς άλλως, τα προϊόντα αυτά είναι προτιμησιακής καταγωγής … (2).

English version

The exporter of the products covered by this document (customs authorisation No … (1)) declares that, except where otherwise clearly indicated, these products are of … (2) preferential origin.

French version

L'exportateur des produits couverts par le présent document (autorisation douanière no … (1)) déclare que, sauf indication claire du contraire, ces produits ont l'origine préférentielle … (2).

Croatian version

Izvoznik proizvoda obuhvaćenih ovom ispravom (carinsko ovlaštenje br. … (1)) izjavljuje da su, osim ako je drukčije izričito navedeno, ovi proizvodi … (2) preferencijalnog podrijetla.

Italian version

L'esportatore delle merci contemplate nel presente documento (autorizzazione doganale n. … (1)) dichiara che, salvo indicazione contraria, le merci sono di origine preferenziale … (2).

Latvian version

To produktu eksportētājs, kuri ietverti šajā dokumentā (muitas atļauja Nr. … (1)), deklarē, ka, izņemot tur, kur ir citādi skaidri noteikts, šiem produktiem ir preferenciāla izcelsme no … (2).

Lithuanian version

Šiame dokumente išvardintų produktų eksportuotojas (muitinės liudijimo Nr. … (1)) deklaruoja, kad, jeigu kitaip nenurodyta, tai yra … (2) preferencinės kilmės produktai.

Hungarian version

A jelen okmányban szereplő áruk exportőre (vámfelhatalmazási szám: … (1)) kijelentem, hogy egyértelmű eltérő jelzés hiányában az áruk preferenciális … (2) származásúak.

Maltese version

L-esportatur tal-prodotti koperti b'dan id-dokument (awtorizzazzjoni tad-dwana Nru … (1)) jiddikjara li, ħlief fejn indikat b'mod ċar li mhux hekk, dawn il-prodotti huma ta' oriġini preferenzjali … (2).

Dutch version

De exporteur van de goederen waarop dit document van toepassing is (douanevergunning nr. … (1)), verklaart dat, behoudens uitdrukkelijke andersluidende vermelding, deze goederen van preferentiële … oorsprong zijn (2).

Polish version

Eksporter produktów objętych tym dokumentem (upoważnienie władz celnych nr … (1)) deklaruje, że z wyjątkiem gdzie jest to wyraźnie określone, produkty te mają … (2) preferencyjne pochodzenie.

Portuguese version

O exportador dos produtos abrangidos pelo presente documento (autorização aduaneira n.o… (1)), declara que, salvo declaração expressa em contrário, estes produtos são de origem preferencial … (2).

Romanian version

Exportatorul produselor ce fac obiectul acestui document (autorizația vamală nr. … (1)) declară că, exceptând cazul în care în mod expres este indicat altfel, aceste produse sunt de origine preferențială … (2).

Slovak version

Vývozca výrobkov uvedených v tomto dokumente (číslo povolenia … (1)) vyhlasuje, že okrem zreteľne označených, majú tieto výrobky preferenčný pôvod v … (2).

Slovenian version

Izvoznik blaga, zajetega s tem dokumentom (pooblastilo carinskih organov št. … (1)) izjavlja, da, razen če ni drugače jasno navedeno, ima to blago preferencialno … (2) poreklo.

Finnish version

Tässä asiakirjassa mainittujen tuotteiden viejä (tullin lupa nro … (1)) ilmoittaa, että nämä tuotteet ovat, ellei toisin ole selvästi merkitty, etuuskohteluun oikeutettuja … alkuperätuotteita (2).

Swedish version

Exportören av de varor som omfattas av detta dokument (tullmyndighetens tillstånd nr … (1)) försäkrar att dessa varor, om inte annat tydligt markerats, har förmånsberättigande … ursprung (2).

 (3)

(Place and date)

 (4)

(Signature of the exporter; in addition the name of the person signing the declaration has to be indicated in clear script)



(1) When the invoice declaration is made out by an approved exporter within the meaning of Article 20 of this Annex, the authorisation number of the approved exporter must be entered in this space. When the invoice declaration is not made out by an approved exporter, the words in brackets shall be omitted or the space left blank.

(2) Origin of products has to be indicated. When the invoice declaration relates, in whole or in part, to products originating in Ceuta and Melilla within the meaning of Article 37 of this Annex, the exporter must clearly indicate them in the document on which the declaration is made out by means of the symbol ‘CM’.

(3) These indications may be omitted if the information is contained on the document itself.

(4) See Article 19(5) of this Annex. In cases where the exporter is not required to sign, the exemption of signature also implies the exemption of the name of the signatory.

Appendix 5A

Supplier declaration for products having preferential origin status

I, the undersigned, declare that the goods listed on this invoice … (1)

were produced in … (2) and satisfy the rules of origin governing preferential trade between the ACP States and the European Union.

I undertake to make available to the customs authorities, if required, evidence in support of this declaration.

 (3) (4)

 (5)

Note

The abovementioned text, suitably completed in conformity with the footnotes below, constitutes a supplier's declaration. The footnotes do not have to be reproduced.



(1) If only some of the goods listed on the invoice are concerned they should be clearly indicated or marked and this marking entered on the declaration as follows: ‘ …listed on this invoice and marked …were produced …’.

If a document other than an invoice or an annex to the invoice is used (see Article 26(3)), the name of the document concerned shall be mentioned instead of …the word ‘invoice’.

(2) The Union, Member State, ACP State or OCT. Where an ACP State or an OCT is given, a reference must also be made to the Union customs office holding any relevant movement certificate(s) EUR.1, giving the reference number(s) of the certificate(s) concerned and, if possible, the relevant customs entry number.

(3) Place and date.

(4) Name and function in company.

(5) Signature.

Appendix 5B

Supplier declaration for products not having preferential original status

I, the undersigned, declare that the goods listed on this invoice … (1) were produced in … (2) and incorporate the following components or materials which do not have ACP, OCT or Union origin for preferential trade:

 (3) (4) (5)



 (6)

I undertake to make available to the customs authorities, if required, evidence in support of this declaration.

 (7) (8)

 (9)

Note

The abovementioned text, suitably completed in conformity with the footnotes below, constitutes a supplier's declaration. The footnotes do not have to be reproduced.



(1) If only some of the goods listed on the invoice are concerned they should be clearly indicated or marked and this marking entered on the declaration as follows: ‘ …listed on this invoice and marked …were produced …’.

If a document other than an invoice or an annex to the invoice is used (see Article 26(3)), the name of the document concerned shall be mentioned instead of …the word ‘invoice’.

(2) The Union, Member State, ACP State, OCT or South Africa.

(3) Description is to be given in all cases. The description must be adequate and should be sufficiently detailed to allow the tariff classification of the goods concerned to be determined.

(4) Customs values to be given only if required.

(5) Country of origin to be given only if required. The origin to be given must be a preferential origin, all other origins to be given as ‘third country’.

(6) ‘and have undergone the following processing in [the Union] [Member State] [ACP State] [OCT] [South Africa] …’, to be added with a description of the processing carried out if this information is required.

(7) Place and date.

(8) Name and function in company.

(9) Signature.

Appendix 6

Information certificate

1.The form of information certificate given in this Appendix shall be used and be printed in one or more of the official languages in which this Regulation is drawn up and in accordance with the provisions of the domestic law of the exporting State. Information certificates shall be completed in one of those languages; if they are handwritten, they shall be completed in ink in capital letters. They shall bear a serial number, whether or not printed, by which they can be identified.

2.The information certificate shall measure 210 × 297 mm, a tolerance of up to plus 8 mm or minus 5 mm in the length may be allowed. The paper must be white, sized for writing, not containing mechanical pulp and weighing not less than 25 g/m2.

3.The national administrators may reserve the right to print the forms themselves or may have them printed by printers approved by them. In the latter case, each form must include a reference to such approval. The forms shall bear the name and address of the printer or a mark by which the printer can be identified.



Text of image

European Union

1. Supplier (1)

INFORMATION CERTIFICATE

to facilitate the issue of a

MOVEMENT CERTIFICATE

for preferential trade between

2. Consignee (1)

THE EUROPEAN UNION

and

THE ACP STATES

3. Processor (1)

4. State in which the working or processing has been carried out

6. Customs office of importation (1)

5. For official use

7. Import document (2)

Form:

No:

Series:

Date:

GOODS SENT TO THE STATE OF DESTINATION

8. Marks, numbers, quantity and kind of package

9. Harmonised Commodity Description and Coding System heading/subheading number (HS code)

10. Quantity (3)

11. Value (4)



Text of image

IMPORTED GOODS USED

12. Harmonised Commodity Description and Coding System heading/subheading number (HS code)

13. Country of origin

14. Quantity (3)

15. Value (2) (5)

16. Nature of the working or processing carried out

17. Remarks

18. CUSTOMS ENDORSEMENT

19. DECLARATION BY SUPPLIER

Declaration certified:

I, the undersigned, declare that the information on this certificate is accurate.

Document:

Form: No:

Customs office:

Place: Date:

Date:

Official stamp

(Signature)

(Signature)

(1) Name of individual or business and full address.

(2) Optional information.

(3) Kg, hl, m3 or other measure.

(4) Packaging is considered as forming a whole with the goods contained therein. However, this provision does not apply to packaging which is not of the normal type for the article packed, and which has a lasting utility value of its own, apart from its function as packaging.

(5) The value must be indicated in accordance with the provisions on rules of origin.



Text of image

REQUEST FOR VERIFICATION

RESULT OF VERIFICATION

The undersigned customs official requests verification of the authenticity and accuracy of this information certificate.

Verification carried out by the undersigned customs official shows that this information certificate:

(a) was issued by the customs office indicated and that the information contained therein is accurate (*)

(b) does not meet the requirements as to authenticity and accuracy (see notes appended) (*)

(Place and date)

(Place and date)

Official stamp

Official stamp

(Official’s signature)

(Official’s signature)

(*) Delete where not applicable.

Appendix 7

Products to which Article 6(5) of this Annex shall not be applicable

Industrial Products (1)

CN code 96

Motor cars and other motor vehicles

8703 10 10

8703 10 90

8703 21 10

8703 21 90

8703 22 11

8703 22 19

8703 22 90

8703 23 11

8703 23 19

8703 23 90

8703 24 10

8703 24 90

8703 31 10

8703 31 90

8703 32 11

8703 32 19

8703 32 90

8703 33 11

8703 33 19

8703 33 90

8703 90 10

8703 90 90

Chassis fitted with engines

8706 00 11

8706 00 19

8706 00 91

8706 00 99

Bodies (including cabs), for the motor vehicles

8707 10 10

8707 10 90

8707 90 10

8707 90 90

Parts and accessories of the motor vehicles

8708 10 10

8708 10 90

8708 21 10

8708 21 90

8708 29 10

8708 29 90

8708 31 10

8708 31 91

8708 31 99

8708 39 10

8708 39 90

8708 40 10

8708 40 90

8708 50 10

8708 50 90

8708 60 10

8708 60 91

8708 60 99

8708 70 10

8708 70 50

8708 70 91

8708 70 99

8708 80 10

8708 80 90

8708 91 10

8708 91 90

8708 92 10

8708 92 90

8708 93 10

8708 93 90

8708 94 10

8708 94 90

8708 99 10

8708 99 30

8708 99 50

8708 99 92

8708 99 98

Industrial Products (2)

Unwrought aluminium

7601 10 00

7601 20 10

7601 20 91

7601 20 99

Aluminium powders and flakes

7603 10 00

7603 20 00

Agricultural Products (1)

Live horses, asses, mules and hinnies

0101 20 10

Milk and cream, not concentrated

0401 10 10

0401 10 90

0401 20 11

0401 20 19

0401 20 91

0401 20 99

0401 30 11

0401 30 19

0401 30 31

0401 30 39

0401 30 91

0401 30 99

Buttermilk, curdled milk and cream, yogurt, kephir

0403 10 11

0403 10 13

0403 10 19

0403 10 31

0403 10 33

0403 10 39

Potatoes, fresh or chilled

0701 90 51

Leguminous vegetables, shelled or unshelled, fresh or chilled

0708 10 20

0708 10 95

Other vegetables, fresh or chilled

0709 51 90

0709 60 10

Vegetables (uncooked or cooked by steaming or boiled)

0710 80 95

Vegetables provisionally preserved

0711 10 00

0711 30 00

0711 90 60

0711 90 70

Dates, figs, pineapples, avocados, guavas, mangoes

0804 20 90

0804 30 00

0804 40 20

0804 40 90

0804 40 95

Grapes, fresh or dried

0806 10 29 (3) (12)

0806 20 11

0806 20 12

0806 20 18

Melons (including watermelons) and papaws (papayas)

0807 11 00

0807 19 00

Apricots, cherries, peaches (including nectarines)

0809 30 11 (5) (12)

0809 30 51 (6) (12)

Other fruit, fresh

0810 90 40

0810 90 85

Fruit and nuts, provisionally preserved

0812 10 00

0812 20 00

0812 90 50

0812 90 60

0812 90 70

0812 90 95

Fruit, dried

0813 40 10

0813 50 15

0813 50 19

0813 50 39

0813 50 91

0813 50 99

Pepper of the genus Piper; dried or crushed

0904 20 10

Soya-bean oil and its fractions

1507 10 10

1507 10 90

1507 90 10

1507 90 90

Sunflower-seed, safflower or cotton-seed oil

1512 11 10

1512 11 91

1512 11 99

1512 19 10

1512 19 91

1512 19 99

1512 21 10

1512 21 90

1512 29 10

1512 29 90

Rape, colza or mustard oil and fractions thereof

1514 10 10

1514 10 90

1514 90 10

1514 90 90

Fruit, nuts and other edible parts of plants

2008 19 59

Fruit juices (including grape must)

2009 20 99

2009 40 99

2009 80 99

Unmanufactured tobacco; tobacco refuse

2401 10 10

2401 10 20

2401 10 41

2401 10 49

2401 10 60

2401 20 10

2401 20 20

2401 20 41

2401 20 60

2401 20 70

Agricultural Products (2)

Cut flowers and flower buds

0603 10 55

0603 10 61

0603 10 69 (11)

Onions, shallots, garlic, leeks

0703 10 11

0703 10 19

0703 10 90

0703 90 00

Cabbages, cauliflowers, kohlrabi, kale and similar

0704 10 05

0704 10 10

0704 10 80

0704 20 00

0704 90 10

0704 90 90

Lettuce (Lactuca sativa) and chicory

0705 11 05

0705 11 10

0705 11 80

0705 19 00

0705 21 00

0705 29 00

Carrots, turnips, salad beetroot, salsify, celeriac

0706 10 00

0706 90 05

0706 90 11

0706 90 17

0706 90 30

0706 90 90

Leguminous vegetables, shelled or unshelled, fresh or chilled

0708 10 90

0708 20 20

0708 20 90

0708 20 95

0708 90 00

Other vegetables, fresh or chilled

0709 10 30 (12)

0709 30 00

0709 40 00

0709 51 10

0709 51 50

0709 70 00

0709 90 10

0709 90 20

0709 90 40

0709 90 50

0709 90 90

Vegetables (uncooked or cooked by steaming or boiled)

0710 10 00

0710 21 00

0710 22 00

0710 29 00

0710 30 00

0710 80 10

0710 80 51

0710 80 61

0710 80 69

0710 80 70

0710 80 80

0710 80 85

0710 90 00

Vegetables provisionally preserved

0711 20 10

0711 40 00

0711 90 40

0711 90 90

Dried vegetables, whole, cut, sliced, broken

0712 20 00

0712 30 00

0712 90 30

0712 90 50

0712 90 90

Manioc, arrowroot, salep, Jerusalem artichokes

0714 90 11

0714 90 19

Other nuts, fresh or dried, whether or not shelled

0802 11 90

0802 21 00

0802 22 00

0802 40 00

Bananas, including plantains, fresh or dried

0803 00 11

0803 00 90

Dates, figs, pineapples, avocados, guavas, mangoes

0804 20 10

Citrus fruit, fresh or dried

0805 20 21 (1) (12)

0805 20 23 (1) (12)

0805 20 25 (1) (12)

0805 20 27 (1) (12)

0805 20 29 (1) (12)

0805 30 90

0805 90 00

Grapes, fresh or dried

0806 10 95

0806 10 97

Apples, pears and quinces, fresh

0808 10 10 (12)

0808 20 10 (12)

0808 20 90

Apricots, cherries, peaches (including nectarines)

0809 10 10 (12)

0809 10 50 (12)

0809 20 19 (12)

0809 20 29 (12)

0809 30 11 (7) (12)

0809 30 19 (12)

0809 30 51 (8) (12)

0809 30 59 (12)

0809 40 40 (12)

Other fruit, fresh

0810 10 05

0810 20 90

0810 30 10

0810 30 30

0810 30 90

0810 40 90

0810 50 00

Fruit and nuts, uncooked or cooked by steaming

0811 20 11

0811 20 31

0811 20 39

0811 20 59

0811 90 11

0811 90 19

0811 90 39

0811 90 75

0811 90 80

0811 90 95

Fruit and nuts, provisionally preserved

0812 90 10

0812 90 20

Fruit, dried

0813 20 00

Wheat and meslin

1001 90 10

Buckwheat, millet and canary seed; other cereals

1008 10 00

1008 20 00

1008 90 90

Flour, meal, powder, flakes, granules and pellets

1105 10 00

1105 20 00

Flour, meal and powder of the dried leguminous vegetables

1106 10 00

1106 30 10

1106 30 90

Fats and oils and their fractions, of fish

1504 30 11

Other prepared or preserved meat, meat offal

1602 20 11

1602 20 19

1602 31 11

1602 31 19

1602 31 30

1602 31 90

1602 32 19

1602 32 30

1602 32 90

1602 39 29

1602 39 40

1602 39 80

1602 41 90

1602 42 90

1602 90 31

1602 90 72

1602 90 76

Vegetables, fruit, nuts and other edible parts

2001 10 00

2001 20 00

2001 90 50

2001 90 65

2001 90 96

Mushrooms and truffles, prepared or preserved

2003 10 20

2003 10 30

2003 10 80

2003 20 00

Other vegetables prepared or preserved otherwise

2004 10 10

2004 10 99

2004 90 50

2004 90 91

2004 90 98

Other vegetables prepared or preserved otherwise

2005 10 00

2005 20 20

2005 20 80

2005 40 00

2005 51 00

2005 59 00

Vegetables, fruit, nuts, fruit-peel

2006 00 31

2006 00 35

2006 00 38

2006 00 99

Jams, fruit jellies, marmalades, fruit or nut puree

2007 10 91

2007 99 93

Fruit, nuts and other edible parts of plants

2008 11 94

2008 11 98

2008 19 19

2008 19 95

2008 19 99

2008 20 51

2008 20 59

2008 20 71

2008 20 79

2008 20 91

2008 20 99

2008 30 11

2008 30 39

2008 30 51

2008 30 59

2008 40 11

2008 40 21

2008 40 29

2008 40 39

2008 60 11

2008 60 31

2008 60 39

2008 60 59

2008 60 69

2008 60 79

2008 60 99

2008 70 11

2008 70 31

2008 70 39

2008 70 59

2008 80 11

2008 80 31

2008 80 39

2008 80 50

2008 80 70

2008 80 91

2008 80 99

2008 99 23

2008 99 25

2008 99 26

2008 99 28

2008 99 36

2008 99 45

2008 99 46

2008 99 49

2008 99 53

2008 99 55

2008 99 61

2008 99 62

2008 99 68

2008 99 72

2008 99 74

2008 99 79

2008 99 99

Fruit juices (including grape must)

2009 11 19

2009 11 91

2009 19 19

2009 19 91

2009 19 99

2009 20 19

2009 20 91

2009 30 19

2009 30 31

2009 30 39

2009 30 51

2009 30 55

2009 30 91

2009 30 95

2009 30 99

2009 40 19

2009 40 91

2009 80 19

2009 80 50

2009 80 61

2009 80 63

2009 80 73

2009 80 79

2009 80 83

2009 80 84

2009 80 86

2009 80 97

2009 90 19

2009 90 29

2009 90 39

2009 90 41

2009 90 51

2009 90 59

2009 90 73

2009 90 79

2009 90 92

2009 90 94

2009 90 95

2009 90 96

2009 90 97

2009 90 98

Other fermented beverages (for example, cider)

2206 00 10

Wine lees; argol

2307 00 19

Vegetable materials and vegetable waste

2308 90 19

Agricultural Products (3)

Live swine

0103 91 10

0103 92 11

0103 92 19

Live sheep and goats

0104 10 30

0104 10 80

0104 20 90

Live poultry, that is to say, fowls of the species

0105 11 11

0105 11 19

0105 11 91

0105 11 99

0105 12 00

0105 19 20

0105 19 90

0105 92 00

0105 93 00

0105 99 10

0105 99 20

0105 99 30

0105 99 50

Meat of swine, fresh, chilled or frozen

0203 11 10

0203 12 11

0203 12 19

0203 19 11

0203 19 13

0203 19 15

0203 19 55

0203 19 59

0203 21 10

0203 22 11

0203 22 19

0203 29 11

0203 29 13

0203 29 15

0203 29 55

0203 29 59

Meat of sheep or goats, fresh, chilled or frozen

0204 10 00

0204 21 00

0204 22 10

0204 22 30

0204 22 50

0204 22 90

0204 23 00

0204 30 00

0204 41 00

0204 42 10

0204 42 30

0204 42 50

0204 42 90

0204 43 10

0204 43 90

0204 50 11

0204 50 13

0204 50 15

0204 50 19

0204 50 31

0204 50 39

0204 50 51

0204 50 53

0204 50 55

0204 50 59

0204 50 71

0204 50 79

Meat and edible offal

0207 11 10

0207 11 30

0207 11 90

0207 12 10

0207 12 90

0207 13 10

0207 13 20

0207 13 30

0207 13 40

0207 13 50

0207 13 60

0207 13 70

0207 13 99

0207 14 10

0207 14 20

0207 14 30

0207 14 40

0207 14 50

0207 14 60

0207 14 70

0207 14 99

0207 24 10

0207 24 90

0207 25 10

0207 25 90

0207 26 10

0207 26 20

0207 26 30

0207 26 40

0207 26 50

0207 26 60

0207 26 70

0207 26 80

0207 26 99

0207 27 10

0207 27 20

0207 27 30

0207 27 40

0207 27 50

0207 27 60

0207 27 70

0207 27 80

0207 27 99

0207 32 11

0207 32 15

0207 32 19

0207 32 51

0207 32 59

0207 32 90

0207 33 11

0207 33 19

0207 33 51

0207 33 59

0207 33 90

0207 35 11

0207 35 15

0207 35 21

0207 35 23

0207 35 25

0207 35 31

0207 35 41

0207 35 51

0207 35 53

0207 35 61

0207 35 63

0207 35 71

0207 35 79

0207 35 99

0207 36 11

0207 36 15

0207 36 21

0207 36 23

0207 36 25

0207 36 31

0207 36 41

0207 36 51

0207 36 53

0207 36 61

0207 36 63

0207 36 71

0207 36 79

0207 36 90

Pig fat, free of lean meat, and poultry fat

0209 00 11

0209 00 19

0209 00 30

0209 00 90

Meat and edible meat offal, salted, in brine

0210 11 11

0210 11 19

0210 11 31

0210 11 39

0210 11 90

0210 12 11

0210 12 19

0210 12 90

0210 19 10

0210 19 20

0210 19 30

0210 19 40

0210 19 51

0210 19 59

0210 19 60

0210 19 70

0210 19 81

0210 19 89

0210 19 90

0210 90 11

0210 90 19

0210 90 21

0210 90 29

0210 90 31

0210 90 39

Milk and cream, concentrated

0402 91 11

0402 91 19

0402 91 31

0402 91 39

0402 91 51

0402 91 59

0402 91 91

0402 91 99

0402 99 11

0402 99 19

0402 99 31

0402 99 39

0402 99 91

0402 99 99

Buttermilk, curdled milk and cream, yogurt, kephir

0403 90 51

0403 90 53

0403 90 59

0403 90 61

0403 90 63

0403 90 69

Whey, whether or not concentrated

0404 10 48

0404 10 52

0404 10 54

0404 10 56

0404 10 58

0404 10 62

0404 10 72

0404 10 74

0404 10 76

0404 10 78

0404 10 82

0404 10 84

Cheese and curd

0406 10 20 (11)

0406 10 80 (11)

0406 20 90 (11)

0406 30 10 (11)

0406 30 31 (11)

0406 30 39 (11)

0406 30 90 (11)

0406 40 90 (11)

0406 90 01 (11)

0406 90 21 (11)

0406 90 50 (11)

0406 90 69 (11)

0406 90 78 (11)

0406 90 86 (11)

0406 90 87 (11)

0406 90 88 (11)

0406 90 93 (11)

0406 90 99 (11)

Birds' eggs, in shell, fresh, preserved or cooked

0407 00 11

0407 00 19

0407 00 30

Birds' eggs, not in shell, and egg yolks, fresh

0408 11 80

0408 19 81

0408 19 89

0408 91 80

0408 99 80

Natural honey

0409 00 00

Tomatoes, fresh or chilled

0702 00 15 (12)

0702 00 20 (12)

0702 00 25 (12)

0702 00 30 (12)

0702 00 35 (12)

0702 00 40 (12)

0702 00 45 (12)

0702 00 50 (12)

Cucumbers and gherkins, fresh or chilled

0707 00 10 (12)

0707 00 15 (12)

0707 00 20 (12)

0707 00 25 (12)

0707 00 30 (12)

0707 00 35 (12)

0707 00 40 (12)

0707 00 90

Other vegetables, fresh or chilled

0709 10 10 (12)

0709 10 20 (12)

0709 20 00

0709 90 39

0709 90 75 (12)

0709 90 77 (12)

0709 90 79 (12)

Vegetables provisionally preserved

0711 20 90

Dried vegetables, whole, cut, sliced, broken

0712 90 19

Manioc, arrowroot, salep, Jerusalem artichokes

0714 10 10

0714 10 91

0714 10 99

0714 20 90

Citrus fruit, fresh or dried

0805 10 37 (2) (12)

0805 10 38 (2) (12)

0805 10 39 (2) (12)

0805 10 42 (2) (12)

0805 10 46 (2) (12)

0805 10 82

0805 10 84

0805 10 86

0805 20 11 (12)

0805 20 13 (12)

0805 20 15 (12)

0805 20 17 (12)

0805 20 19 (12)

0805 20 21 (10) (12)

0805 20 23 (10) (12)

0805 20 25 (10) (12)

0805 20 27 (10) (12)

0805 20 29 (10) (12)

0805 20 31 (12)

0805 20 33 (12)

0805 20 35 (12)

0805 20 37 (12)

0805 20 39 (12)

Grapes, fresh or dried

0806 10 21 (12)

0806 10 29 (4) (12)

0806 10 30 (12)

0806 10 50 (12)

0806 10 61 (12)

0806 10 69 (12)

0806 10 93

Apricots, cherries, peaches (including nectarines)

0809 10 20 (12)

0809 10 30 (12)

0809 10 40 (12)

0809 20 11 (12)

0809 20 21 (12)

0809 20 31 (12)

0809 20 39 (12)

0809 20 41 (12)

0809 20 49 (12)

0809 20 51 (12)

0809 20 59 (12)

0809 20 61 (12)

0809 20 69 (12)

0809 20 71 (12)

0809 20 79 (12)

0809 30 21 (12)

0809 30 29 (12)

0809 30 31 (12)

0809 30 39 (12)

0809 30 41 (12)

0809 30 49 (12)

0809 40 20 (12)

0809 40 30 (12)

Other fruit, fresh

0810 10 10

0810 10 80

0810 20 10

Fruit and nuts, uncooked or cooked by steaming

0811 10 11

0811 10 19

Wheat and meslin

1001 10 00

1001 90 91

1001 90 99

Rye

1002 00 00

Barley

1003 00 10

1003 00 90

Oats

1004 00 00

Buckwheat, millet and canary seed; other cereals

1008 90 10

Wheat or meslin flour

1101 00 11

1101 00 15

1101 00 90

Cereal flours other than of wheat or meslin

1102 10 00

1102 90 10

1102 90 30

1102 90 90

Cereal groats, meal and pellets

1103 11 10

1103 11 90

1103 12 00

1103 19 10

1103 19 30

1103 19 90

1103 21 00

1103 29 10

1103 29 20

1103 29 30

1103 29 90

Cereal grains otherwise worked

1104 11 10

1104 11 90

1104 12 10

1104 12 90

1104 19 10

1104 19 30

1104 19 99

1104 21 10

1104 21 30

1104 21 50

1104 21 90

1104 21 99

1104 22 20

1104 22 30

1104 22 50

1104 22 90

1104 22 92

1104 22 99

1104 29 11

1104 29 15

1104 29 19

1104 29 31

1104 29 35

1104 29 39

1104 29 51

1104 29 55

1104 29 59

1104 29 81

1104 29 85

1104 29 89

1104 30 10

Flour, meal and powder of the dried leguminous vegetables

1106 20 10

1106 20 90

Malt, whether or not roasted

1107 10 11

1107 10 19

1107 10 91

1107 10 99

1107 20 00

Locust beans, seaweeds and other algae, sugar beet

1212 91 20

1212 91 80

Pig fat (including lard) and poultry fat

1501 00 19

Olive oil and its fractions, whether or not refined

1509 10 10

1509 10 90

1509 90 00

Other oils and their fractions

1510 00 10

1510 00 90

Degras

1522 00 31

1522 00 39

Sausages and similar products, of meat, meat offal

1601 00 91

1601 00 99

Other prepared or preserved meat, meat offal

1602 10 00

1602 20 90

1602 32 11

1602 39 21

1602 41 10

1602 42 10

1602 49 11

1602 49 13

1602 49 15

1602 49 19

1602 49 30

1602 49 50

1602 49 90

1602 50 31

1602 50 39

1602 50 80

1602 90 10

1602 90 41

1602 90 51

1602 90 69

1602 90 74

1602 90 78

1602 90 98

Other sugars, including chemically pure lactose

1702 11 00

1702 19 00

Pasta, whether or not cooked or stuffed

1902 20 30

Jams, fruit jellies, marmalades, fruit or nut puree

2007 10 99

2007 91 90

2007 99 91

2007 99 98

Fruit, nuts and other edible parts of plants

2008 20 11

2008 20 31

2008 30 19

2008 30 31

2008 30 79

2008 30 91

2008 30 99

2008 40 19

2008 40 31

2008 50 11

2008 50 19

2008 50 31

2008 50 39

2008 50 51

2008 50 59

2008 60 19

2008 60 51

2008 60 61

2008 60 71

2008 60 91

2008 70 19

2008 70 51

2008 80 19

2008 92 16

2008 92 18

2008 99 21

2008 99 32

2008 99 33

2008 99 34

2008 99 37

2008 99 43

Fruit juices (including grape must)

2009 11 11

2009 19 11

2009 20 11

2009 30 11

2009 30 59

2009 40 11

2009 50 10

2009 50 90

2009 80 11

2009 80 32

2009 80 33

2009 80 35

2009 90 11

2009 90 21

2009 90 31

Food preparations not elsewhere specified

2106 90 51

Wine of fresh grapes, including fortified wines

2204 10 19 (11)

2204 10 99 (11)

2204 21 10

2204 21 81

2204 21 82

2204 21 98

2204 21 99

2204 29 10

2204 29 58

2204 29 75

2204 29 98

2204 29 99

2204 30 10

2204 30 92 (12)

2204 30 94 (12)

2204 30 96 (12)

2204 30 98 (12)

Undenatured ethyl alcohol

2208 20 40

Bran, sharps and other residues

2302 30 10

2302 30 90

2302 40 10

2302 40 90

Oil-cake and other solid residues

2306 90 19

Preparations of a kind used in animal feeding

2309 10 13

2309 10 15

2309 10 19

2309 10 33

2309 10 39

2309 10 51

2309 10 53

2309 10 59

2309 10 70

2309 90 33

2309 90 35

2309 90 39

2309 90 43

2309 90 49

2309 90 51

2309 90 53

2309 90 59

2309 90 70

Albumins

3502 11 90

3502 19 90

3502 20 91

3502 20 99

Agricultural Products (4)

Buttermilk, curdled milk and cream, yogurt, kephir

0403 10 51

0403 10 53

0403 10 59

0403 10 91

0403 10 93

0403 10 99

0403 90 71

0403 90 73

0403 90 79

0403 90 91

0403 90 93

0403 90 99

Butter and other fats and oils derived from milk

0405 20 10

0405 20 30

Vegetable saps and extracts; pectic substances

1302 20 10

1302 20 90

Margarine

1517 10 10

1517 90 10

Other sugars, including chemically pure lactose

1702 50 00

1702 90 10

Sugar confectionery (including white chocolate)

1704 10 11

1704 10 19

1704 10 91

1704 10 99

1704 90 10

1704 90 30

1704 90 51

1704 90 55

1704 90 61

1704 90 65

1704 90 71

1704 90 75

1704 90 81

1704 90 99

Chocolate and other food preparations

1806 10 15

1806 10 20

1806 10 30

1806 10 90

1806 20 10

1806 20 30

1806 20 50

1806 20 70

1806 20 80

1806 20 95

1806 31 00

1806 32 10

1806 32 90

1806 90 11

1806 90 19

1806 90 31

1806 90 39

1806 90 50

1806 90 60

1806 90 70

1806 90 90

Malt extract; food preparations of flour, meal

1901 10 00

1901 20 00

1901 90 11

1901 90 19

1901 90 99

Pasta, whether or not cooked or stuffed

1902 11 00

1902 19 10

1902 19 90

1902 20 91

1902 20 99

1902 30 10

1902 30 90

1902 40 10

1902 40 90

Tapioca and substitutes

1903 00 00

Prepared foods

1904 10 10

1904 10 30

1904 10 90

1904 20 10

1904 20 91

1904 20 95

1904 20 99

1904 90 10

1904 90 90

Bread, pastry, cakes, biscuits

1905 10 00

1905 20 10

1905 20 30

1905 20 90

1905 30 11

1905 30 19

1905 30 30

1905 30 51

1905 30 59

1905 30 91

1905 30 99

1905 40 10

1905 40 90

1905 90 10

1905 90 20

1905 90 30

1905 90 40

1905 90 45

1905 90 55

1905 90 60

1905 90 90

Vegetables, fruit, nuts

2001 90 40

Other vegetables

2004 10 91

Other vegetables

2005 20 10

Fruit, nuts and other edible parts of plants

2008 99 85

2008 99 91

Fruit juices (including grape must)

2009 80 69

Extracts, essences and concentrates, of coffee

2101 11 11

2101 11 19

2101 12 92

2101 12 98

2101 20 98

2101 30 11

2101 30 19

2101 30 91

2101 30 99

Yeasts (active or inactive)

2102 10 10

2102 10 31

2102 10 39

2102 10 90

2102 20 11

Sauces and preparations therefore; mixed condiments

2103 20 00

Ice cream and other edible ice

2105 00 10

2105 00 91

2105 00 99

Food preparations not elsewhere specified or included

2106 10 20

2106 10 80

2106 90 10

2106 90 20

2106 90 98

Waters, including mineral waters and aerated water

2202 90 91

2202 90 95

2202 90 99

Vinegar and substitutes for vinegar

2209 00 11

2209 00 19

2209 00 91

2209 00 99

Acyclic alcohols and their halogenated derivatives

2905 43 00

2905 44 11

2905 44 19

2905 44 91

2905 44 99

2905 45 00

Mixtures of odoriferous substances and mixtures

3302 10 10

3302 10 21

3302 10 29

Finishing agents, dye carriers

3809 10 10

3809 10 30

3809 10 50

3809 10 90

Prepared binders for foundry moulds or cores

3824 60 11

3824 60 19

3824 60 91

3824 60 99

Agricultural Products (5)

Cut flowers and flower buds

0603 10 15 (11)

0603 10 29 (11)

0603 10 51 (11)

0603 10 65 (11)

0603 90 00 (11)

Fruit and nuts, uncooked or cooked by steaming

0811 10 90 (11)

Fruit, nuts and other edible parts of plants

2008 40 51 (11)

2008 40 59 (11)

2008 40 71 (11)

2008 40 79 (11)

2008 40 91 (11)

2008 40 99 (11)

2008 50 61 (11)

2008 50 69 (11)

2008 50 71 (11)

2008 50 79 (11)

2008 50 92 (11)

2008 50 94 (11)

2008 50 99 (11)

2008 70 61 (11)

2008 70 69 (11)

2008 70 71 (11)

2008 70 79 (11)

2008 70 92 (11)

2008 70 94 (11)

2008 70 99 (11)

2008 92 59 (11)

2008 92 72 (11)

2008 92 74 (11)

2008 92 78 (11)

2008 92 98 (11)

Fruit juices (including grape must)

2009 11 99 (11)

2009 40 30 (11)

2009 70 11 (11)

2009 70 19 (11)

2009 70 30 (11)

2009 70 91 (11)

2009 70 93 (11)

2009 70 99 (11)

Wine of fresh grapes, including fortified wines

2204 21 79 (11)

2204 21 80 (11)

2204 21 83 (11)

2204 21 84 (11)

Agricultural Products (6)

Live bovine animals

0102 90 05

0102 90 21

0102 90 29

0102 90 41

0102 90 49

0102 90 51

0102 90 59

0102 90 61

0102 90 69

0102 90 71

0102 90 79

Meat of bovine animals, fresh or chilled:

0201 10 00

0201 20 20

0201 20 30

0201 20 50

0201 20 90

0201 30 00

Meat of bovine animals, frozen

0202 10 00

0202 20 10

0202 20 30

0202 20 50

0202 20 90

0202 30 10

0202 30 50

0202 30 90

Edible offal of bovine animals, swine, sheep, goats

0206 10 95

0206 29 91

0206 29 99

Meat and edible meat offal, salted, in brine

0210 20 10

0210 20 90

0210 90 41

0210 90 49

0210 90 90

Milk and cream, concentrated

0402 10 11

0402 10 19

0402 10 91

0402 10 99

0402 21 11

0402 21 17

0402 21 19

0402 21 91

0402 21 99

0402 29 11

0402 29 15

0402 29 19

0402 29 91

0402 29 99

Buttermilk, curdled milk and cream, yogurt, kephir

0403 90 11

0403 90 13

0403 90 19

0403 90 31

0403 90 33

0403 90 39

Whey, whether or not concentrated

0404 10 02

0404 10 04

0404 10 06

0404 10 12

0404 10 14

0404 10 16

0404 10 26

0404 10 28

0404 10 32

0404 10 34

0404 10 36

0404 10 38

0404 90 21

0404 90 23

0404 90 29

0404 90 81

0404 90 83

0404 90 89

Butter and other fats and oils derived from milk

0405 10 11

0405 10 30

0405 10 50

0405 10 90

0405 20 90

0405 90 10

0405 90 90

Cut flowers and flower buds

0603 10 11

0603 10 13

0603 10 21

0603 10 25

0603 10 53

Other vegetables, fresh or chilled

0709 90 60

Vegetables (uncooked or cooked by steaming or boiling)

0710 40 00

Vegetables provisionally preserved

0711 90 30

Bananas, including plantains, fresh or dried

0803 00 19

Citrus fruit, fresh or dried

0805 10 01 (12)

0805 10 05 (12)

0805 10 09 (12)

0805 10 11 (12)

0805 10 15 (2)

0805 10 19 (2)

0805 10 21 (2)

0805 10 25 (12)

0805 10 29 (12)

0805 10 31 (12)

0805 10 33 (12)

0805 10 35 (12)

0805 10 37 (9) (12)

0805 10 38 (9) (12)

0805 10 39 (9) (12)

0805 10 42 (9) (12)

0805 10 44 (12)

0805 10 46 (9) (12)

0805 10 51 (2)

0805 10 55 (2)

0805 10 59 (2)

0805 10 61 (2)

0805 10 65 (2)

0805 10 69 (2)

0805 30 20 (2)

0805 30 30 (2)

0805 30 40 (2)

Grapes, fresh or dried

0806 10 40 (12)

Apples, pears and quinces, fresh

0808 10 51 (12)

0808 10 53 (12)

0808 10 59 (12)

0808 10 61 (12)

0808 10 63 (12)

0808 10 69 (12)

0808 10 71 (12)

0808 10 73 (12)

0808 10 79 (12)

0808 10 92 (12)

0808 10 94 (12)

0808 10 98 (12)

0808 20 31 (12)

0808 20 37 (12)

0808 20 41 (12)

0808 20 47 (12)

0808 20 51 (12)

0808 20 57 (12)

0808 20 67 (12)

Maize (corn)

1005 10 90

1005 90 00

Rice

1006 10 10

1006 10 21

1006 10 23

1006 10 25

1006 10 27

1006 10 92

1006 10 94

1006 10 96

1006 10 98

1006 20 11

1006 20 13

1006 20 15

1006 20 17

1006 20 92

1006 20 94

1006 20 96

1006 20 98

1006 30 21

1006 30 23

1006 30 25

1006 30 27

1006 30 42

1006 30 44

1006 30 46

1006 30 48

1006 30 61

1006 30 63

1006 30 65

1006 30 67

1006 30 92

1006 30 94

1006 30 96

1006 30 98

1006 40 00

Grain sorghum

1007 00 10

1007 00 90

Cereal flours other than of wheat or meslin

1102 20 10

1102 20 90

1102 30 00

Cereal groats, meal and pellets

1103 13 10

1103 13 90

1103 14 00

1103 29 40

1103 29 50

Cereal grains otherwise worked

1104 19 50

1104 19 91

1104 23 10

1104 23 30

1104 23 90

1104 23 99

1104 30 90

Starches; inulin

1108 11 00

1108 12 00

1108 13 00

1108 14 00

1108 19 10

1108 19 90

1108 20 00

Wheat gluten, whether or not dried

1109 00 00

Other prepared or preserved meat, meat offal

1602 50 10

1602 90 61

Cane or beet sugar and chemically pure sucrose

1701 11 10

1701 11 90

1701 12 10

1701 12 90

1701 91 00

1701 99 10

1701 99 90

Other sugars, including chemically pure lactose

1702 20 10

1702 20 90

1702 30 10

1702 30 51

1702 30 59

1702 30 91

1702 30 99

1702 40 10

1702 40 90

1702 60 10

1702 60 90

1702 90 30

1702 90 50

1702 90 60

1702 90 71

1702 90 75

1702 90 79

1702 90 80

1702 90 99

Vegetables, fruit, nuts and other edible parts

2001 90 30

Tomatoes prepared or preserved

2002 10 10

2002 10 90

2002 90 11

2002 90 19

2002 90 31

2002 90 39

2002 90 91

2002 90 99

Other vegetables prepared or preserved

2004 90 10

Other vegetables prepared or preserved

2005 60 00

2005 80 00

Jams, fruit jellies, marmalades, fruit or nut puree

2007 10 10

2007 91 10

2007 91 30

2007 99 10

2007 99 20

2007 99 31

2007 99 33

2007 99 35

2007 99 39

2007 99 51

2007 99 55

2007 99 58

Fruit, nuts and other edible parts of plants

2008 30 55

2008 30 75

2008 92 51

2008 92 76

2008 92 92

2008 92 93

2008 92 94

2008 92 96

2008 92 97

Fruit juices (including grape must)

2009 40 93

2009 60 11 (12)

2009 60 19 (12)

2009 60 51 (12)

2009 60 59 (12)

2009 60 71 (12)

2009 60 79 (12)

2009 60 90 (12)

2009 80 71

2009 90 49

2009 90 71

Food preparations not elsewhere specified or included

2106 90 30

2106 90 55

2106 90 59

Wine of fresh grapes, including fortified wines

2204 21 94

2204 29 62

2204 29 64

2204 29 65

2204 29 83

2204 29 84

2204 29 94

Vermouth and other wine of fresh grapes

2205 10 10

2205 10 90

2205 90 10

2205 90 90

Undenatured ethyl alcohol

2207 10 00

2207 20 00

Undenatured ethyl alcohol

2208 40 10

2208 40 90

2208 90 91

2208 90 99

Bran, sharps and other residues

2302 10 10

2302 10 90

2302 20 10

2302 20 90

Residues of starch manufacture and similar residues

2303 10 11

Dextrins and other modified starches

3505 10 10

3505 10 90

3505 20 10

3505 20 30

3505 20 50

3505 20 90

Agricultural Products (7)

Cheese and curd

0406 20 10

0406 40 10

0406 40 50

0406 90 02

0406 90 03

0406 90 04

0406 90 05

0406 90 06

0406 90 07

0406 90 08

0406 90 09

0406 90 12

0406 90 14

0406 90 16

0406 90 18

0406 90 19

0406 90 23

0406 90 25

0406 90 27

0406 90 29

0406 90 31

0406 90 33

0406 90 35

0406 90 37

0406 90 39

0406 90 61

0406 90 63

0406 90 73

0406 90 75

0406 90 76

0406 90 79

0406 90 81

0406 90 82

0406 90 84

0406 90 85

Wine of fresh grapes, including fortified wines

2204 10 11

2204 10 91

2204 21 11

2204 21 12

2204 21 13

2204 21 17

2204 21 18

2204 21 19

2204 21 22

2204 21 24

2204 21 26

2204 21 27

2204 21 28

2204 21 32

2204 21 34

2204 21 36

2204 21 37

2204 21 38

2204 21 42

2204 21 43

2204 21 44

2204 21 46

2204 21 47

2204 21 48

2204 21 62

2204 21 66

2204 21 67

2204 21 68

2204 21 69

2204 21 71

2204 21 74

2204 21 76

2204 21 77

2204 21 78

2204 21 87

2204 21 88

2204 21 89

2204 21 91

2204 21 92

2204 21 93

2204 21 95

2204 21 96

2204 21 97

2204 29 12

2204 29 13

2204 29 17

2204 29 18

2204 29 42

2204 29 43

2204 29 44

2204 29 46

2204 29 47

2204 29 48

2204 29 71

2204 29 72

2204 29 81

2204 29 82

2204 29 87

2204 29 88

2204 29 89

2204 29 91

2204 29 92

2204 29 93

2204 29 95

2204 29 96

2204 29 97

Undenatured ethyl alcohol

2208 20 12

2208 20 14

2208 20 26

2208 20 27

2208 20 62

2208 20 64

2208 20 86

2208 20 87

2208 30 11

2208 30 19

2208 30 32

2208 30 38

2208 30 52

2208 30 58

2208 30 72

2208 30 78

2208 90 41

2208 90 45

2208 90 52

Footnotes

(1)(16/5-15/9)

(2)(1/6-15/10)

(3)(1/1-31/5) Excluding Emperor variety

(4)Emperor variety or (1/6-31/12)

(5)(1/1-31/3)

(6)(1/10-31/12)

(7)(1/4-31/12)

(8)(1/1-30/9)

(9)(16/10-31/5)

(10)(16/9-15/5)

(11)Under the TDCA, the annual growth factor (agf) will be applied annually to the relevant basic quantities.

(12)Under the TDCA, the full specific duty is payable if the respective Entry Price is not reached.

Appendix 8

Fishery products to which Article 6(5) of this Annex shall temporarily not be applicable

Fish Products (1)

CN code 96

Live fish

0301 10 90

0301 92 00

0301 99 11

Fish, fresh or chilled, excluding fish fillets

0302 12 00

0302 31 10

0302 32 10

0302 33 10

0302 39 11

0302 39 19

0302 66 00

0302 69 21

Fish, frozen, excluding fish fillets

0303 10 00

0303 22 00

0303 41 11

0303 41 13

0303 41 19

0303 42 12

0303 42 18

0303 42 32

0303 42 38

0303 42 52

0303 42 58

0303 43 11

0303 43 13

0303 43 19

0303 49 21

0303 49 23

0303 49 29

0303 49 41

0303 49 43

0303 49 49

0303 76 00

0303 79 21

0303 79 23

0303 79 29

Fish fillets and other fish meat

0304 10 13

0304 20 13

Pasta, whether or not cooked or stuffed

1902 20 10

Fish Products (2)

Live fish

0301 91 10

0301 93 00

0301 99 19

Fish, fresh or chilled, excluding fish fillets

0302 11 10

0302 19 00

0302 21 10

0302 21 30

0302 22 00

0302 62 00

0302 63 00

0302 65 20

0302 65 50

0302 65 90

0302 69 11

0302 69 19

0302 69 31

0302 69 33

0302 69 41

0302 69 45

0302 69 51

0302 69 85

0302 69 86

0302 69 92

0302 69 99

0302 70 00

Fish, frozen, excluding fish fillets

0303 21 10

0303 29 00

0303 31 10

0303 31 30

0303 33 00

0303 39 10

0303 72 00

0303 73 00

0303 75 20

0303 75 50

0303 75 90

0303 79 11

0303 79 19

0303 79 35

0303 79 37

0303 79 45

0303 79 51

0303 79 60

0303 79 62

0303 79 83

0303 79 85

0303 79 87

0303 79 92

0303 79 93

0303 79 94

0303 79 96

0303 80 00

Fish fillets and other fish meat

0304 10 19

0304 10 91

0304 20 19

0304 20 21

0304 20 29

0304 20 31

0304 20 33

0304 20 35

0304 20 37

0304 20 41

0304 20 43

0304 20 61

0304 20 69

0304 20 71

0304 20 73

0304 20 87

0304 20 91

0304 90 10

0304 90 31

0304 90 39

0304 90 41

0304 90 45

0304 90 57

0304 90 59

0304 90 97

Fish, dried, salted or in brine; smoked fish

0305 42 00

0305 59 50

0305 59 70

0305 63 00

0305 69 30

0305 69 50

0305 69 90

Crustaceans, whether in shell or not, live, fresh

0306 11 10

0306 11 90

0306 12 10

0306 12 90

0306 13 10

0306 13 90

0306 14 10

0306 14 30

0306 14 90

0306 19 10

0306 19 90

0306 21 00

0306 22 10

0306 22 91

0306 22 99

0306 23 10

0306 23 90

0306 24 10

0306 24 30

0306 24 90

0306 29 10

0306 29 90

Molluscs, whether in shell or not, live, fresh

0307 10 90

0307 21 00

0307 29 10

0307 29 90

0307 31 10

0307 31 90

0307 39 10

0307 39 90

0307 41 10

0307 41 91

0307 41 99

0307 49 01

0307 49 11

0307 49 18

0307 49 31

0307 49 33

0307 49 35

0307 49 38

0307 49 51

0307 49 59

0307 49 71

0307 49 91

0307 49 99

0307 51 00

0307 59 10

0307 59 90

0307 91 00

0307 99 11

0307 99 13

0307 99 15

0307 99 18

0307 99 90

Prepared or preserved fish; caviar and caviar substitutes

1604 11 00

1604 13 90

1604 15 11

1604 15 19

1604 15 90

1604 19 10

1604 19 50

1604 19 91

1604 19 92

1604 19 93

1604 19 94

1604 19 95

1604 19 98

1604 20 05

1604 20 10

1604 20 30

1604 30 10

1604 30 90

Crustaceans, molluscs and other aquatic invertebra

1605 10 00

1605 20 10

1605 20 91

1605 20 99

1605 30 00

1605 40 00

1605 90 11

1605 90 19

1605 90 30

1605 90 90

Fish Products (3)

Live fish

0301 91 90

Fish, fresh or chilled, excluding fish fillets

0302 11 90

Fish, frozen, excluding fish fillets

0303 21 90

Fish fillets and other fish meat

0304 10 11

0304 20 11

0304 20 57

0304 20 59

0304 90 47

0304 90 49

Prepared or preserved fish; caviar and caviar substitutes

1604 13 11

Fish Products (4)

Live fish

0301 99 90

Fish, fresh or chilled, excluding fish fillets

0302 21 90

0302 23 00

0302 29 10

0302 29 90

0302 31 90

0302 32 90

0302 33 90

0302 39 91

0302 39 99

0302 40 05

0302 40 98

0302 50 10

0302 50 90

0302 61 10

0302 61 30

0302 61 90

0302 61 98

0302 64 05

0302 64 98

0302 69 25

0302 69 35

0302 69 55

0302 69 61

0302 69 75

0302 69 87

0302 69 91

0302 69 93

0302 69 94

0302 69 95

Fish, frozen, excluding fish fillets

0303 31 90

0303 32 00

0303 39 20

0303 39 30

0303 39 80

0303 41 90

0303 42 90

0303 43 90

0303 49 90

0303 50 05

0303 50 98

0303 60 11

0303 60 19

0303 60 90

0303 71 10

0303 71 30

0303 71 90

0303 71 98

0303 74 10

0303 74 20

0303 74 90

0303 77 00

0303 79 31

0303 79 41

0303 79 55

0303 79 65

0303 79 71

0303 79 75

0303 79 91

0303 79 95

Fish fillets and other fish meat

0304 10 31

0304 10 33

0304 10 35

0304 10 38

0304 10 94

0304 10 96

0304 10 98

0304 20 45

0304 20 51

0304 20 53

0304 20 75

0304 20 79

0304 20 81

0304 20 85

0304 20 96

0304 90 05

0304 90 20

0304 90 27

0304 90 35

0304 90 38

0304 90 51

0304 90 55

0304 90 61

0304 90 65

Fish, dried, salted or in brine; smoked fish

0305 10 00

0305 20 00

0305 30 11

0305 30 19

0305 30 30

0305 30 50

0305 30 90

0305 41 00

0305 49 10

0305 49 20

0305 49 30

0305 49 45

0305 49 50

0305 49 80

0305 51 10

0305 51 90

0305 59 11

0305 59 19

0305 59 30

0305 59 60

0305 59 90

0305 61 00

0305 62 00

0305 69 10

0305 69 20

Crustaceans, whether in shell or not, live, fresh

0306 13 30

0306 19 30

0306 23 31

0306 23 39

0306 29 30

Prepared or preserved fish; caviar and caviar substitutes

1604 12 10

1604 12 91

1604 12 99

1604 14 12

1604 14 14

1604 14 16

1604 14 18

1604 14 90

1604 19 31

1604 19 39

1604 20 70

Fish Products (5)

Fish, fresh or chilled, excluding fish fillets

0302 69 65

0302 69 81

Fish, frozen, excluding fish fillets

0303 78 10

0303 78 90

0303 79 81

Fish fillets and other fish meat

0304 20 83

Prepared or preserved fish; caviar and caviar substitutes

1604 13 19

1604 16 00

1604 20 40

1604 20 50

1604 20 90

Appendix 9

Neighbouring developing countries

For the implementation of Article 6(13) of this Annex, the expression ‘neighbouring developing country belonging to a coherent geographical entity’ shall refer to the following list of countries:

Africa:Algeria, Egypt, Libya, Morocco, Tunisia;
Caribbean:Colombia, Costa Rica, Cuba, El Salvador, Guatemala, Honduras, Nicaragua, Panama, Venezuela.

Appendix 10

Products for which the cumulation provisions referred to in Article 2(2) and Article 6(1) and (2) of this Annex apply after 1 October 2015 and to which the provisions of Article 6(5), (9) and (12) of this Annex shall not be applicable

CN codeDescription
1701Cane or beet sugar and chemically pure sucrose, in solid form.
1702Other sugars, including chemically pure lactose, maltose, glucose and fructose, in solid form; sugar syrups not containing added flavouring or colouring matter; artificial honey, whether or not mixed with natural honey; caramel.
1704 90 99Sugar confectionery (including white chocolate), not containing cocoa:

other:

– –other:

– – –other:

– – – –other:

– – – – –other:
1806 10 30Chocolate and other food preparations containing cocoa:

cocoa powder, containing added sugar or other sweetening matter:

– –containing 65 % or more but less than 80 % by weight of sucrose (including invert sugar expressed as sucrose) or isoglucose expressed as sucrose
1806 10 90Chocolate and other food preparations containing cocoa:

cocoa powder, containing added sugar or other sweetening matter:

– –containing 80 % or more by weight of sucrose (including invert sugar expressed as sucrose) or isoglucose expressed as sucrose
1806 20 95Chocolate and other food preparations containing cocoa:

other preparations in blocks, slabs or bars weighing more than 2 kg or in liquid, paste, powder, granular or other bulk form in containers or immediate packings, of a content exceeding 2 kg:

– –other:

– – –other
1901 90 99Malt extract, food preparations of flour, groats, meal, starch or malt extract, not containing cocoa or containing less than 40 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included, food preparations of goods of headings 0401 to 0404 , not containing cocoa or containing less than 5 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included:

other:

– –other:

– – –other
2101 12 98Extracts, essences and concentrates, of coffee, tea or maté and preparations with a basis of these products or with a basis of coffee, tea or maté; roasted chicory and other roasted coffee substitutes, and extracts, essences and concentrates thereof:

extracts, essences and concentrates, of coffee, and preparations with a basis of these extracts, essences or concentrates or with a basis of coffee:

– –preparations with a basis of these extracts, essences or concentrates or with a basis of coffee:

– – –other
2101 20 98Extracts, essences and concentrates, of coffee, tea or maté and preparations with a basis of these products or with a basis of coffee, tea or maté; roasted chicory and other roasted coffee substitutes, and extracts, essences and concentrates thereof:

extracts, essences and concentrates, of tea or maté, and preparations with a basis of these extracts, essences or concentrates, or with a basis of tea or maté:

– –preparations:

– – –other
2106 90 59Food preparations not elsewhere specified or included:

other:

– –flavoured or coloured sugar syrups:

– – –other:

– – – –other
2106 90 98Food preparations not elsewhere specified or included:

other:

– –other:

– – –other
3302 10 29Mixtures of odoriferous substances and mixtures (including alcoholic solutions) with a basis of one or more of these substances, of a kind used as raw materials in industry; other preparations based on odoriferous substances, of a kind used for the manufacture of beverages:

of a kind used in the food or drink industries:

– –of the type used in the drink industries:

– – –preparations containing all flavouring agents characterising a beverage:

– – – –other:

– – – – –other

Appendix 11

Products to which the provisions of Article 6(5), (9) and (12) of this Annex shall not be applicable

CN codeDescription
ex 1006Rice other than rice under code 1006 10 10

Appendix 12

Overseas countries and territories

Within the meaning of this Annex ‘overseas countries and territories’ shall mean the countries and territories referred to in Part Four of the Treaty on the Functioning of the European Union listed below:

(This list does not prejudge the status of these countries and territories, or future changes in their status.)

1.Country having special relations with the Kingdom of Denmark:

Greenland.

2.Overseas territories of the French Republic:

New Caledonia and Dependencies,

French Polynesia,

French Southern and Antarctic Territories,

Wallis and Futuna Islands.

3.Territorial collectivities of the French Republic:

Saint Pierre and Miquelon.

4.Caribbean part of the Kingdom of the Netherlands:

Aruba,

Bonaire,

Curaçao,

Saba,

Sint Eustatius,

Sint Maarten.

5.British overseas countries and territories:

Anguilla,

Cayman Islands,

Falkland Islands,

South Georgia and South Sandwich Islands,

Montserrat,

Pitcairn,

Saint Helena, Ascension Island, Tristan da Cunha,

British Antarctic Territory,

British Indian Ocean Territory,

Turks and Caicos Islands,

British Virgin Islands.



ANNEX III

REPEALED REGULATION WITH LIST OF ITS SUCCESSIVE AMENDMENTS

Council Regulation (EC) No 1528/2007

(OJ L 348, 31.12.2007, p. 1)
Council Regulation (EC) No 1217/2008

(OJ L 330, 9.12.2008, p. 1)
Council Regulation (EU) No 517/2013

(OJ L 158, 10.6.2013, p. 1)
Only the second indent of point (m) of Article 1(1), and point 15.B.2 of the Annex
Regulation (EU) No 527/2013 of the European Parliament and of the Council

(OJ L 165, 18.6.2013, p. 59)
Regulation (EU) No 37/2014 of the European Parliament and of the Council

(OJ L 18, 21.1.2014, p. 1)
Only point 14 of the Annex
Regulation (EU) No 38/2014 of the European Parliament and of the Council

(OJ L 18, 21.1.2014, p. 52)
Only point 5 of the Annex
Commission Delegated Regulation (EU) No 1025/2014

(OJ L 284, 30.9.2014, p. 1)
Commission Delegated Regulation (EU) No 1026/2014

(OJ L 284, 30.9.2014, p. 3)
Commission Delegated Regulation (EU) No 1027/2014

(OJ L 284, 30.9.2014, p. 5)
Commission Delegated Regulation (EU) No 1387/2014

(OJ L 369, 24.12.2014, p. 35)



ANNEX IV

CORRELATION TABLE

Regulation (EC) No 1528/2007This Regulation
Articles 1 and 2Articles 1 and 2
Article 2aArticle 3
Article 2b
Article 3(1) and (2)Article 4(1) and (2)
Article 3(3)
Article 3(4)Article 4(3)
Article 3(5)Article 4(4)
Article 4Article 5
Article 5Article 6
Article 6(1)Article 7
Article 6(2) and (3)
Article 7(1)Article 8
Article 7(2), (3) and (4)
Article 8
Articles 9 to 15Articles 9 to 13
Article 16(1), (2) and (3)Article 14(1), (2) and (3)
Article 16(5)Article 14(4)
Article 16(6)Article 14(5)
Article 16(7)Article 14(6)
Article 17Article 15
Article 18(1) and (2)Article 16(1) and (2)
Article 18(5), introductory wordingArticle 16(3), introductory wording
Article 18(5), first indentArticle 16(3), point (a)
Article 18(5), second indentArticle 16(3), point (b)
Article 18(5), third indentArticle 16(3), point (c)
Article 18(6)Article 16(4)
Articles 19 to 23Articles 17 to 21
Article 24aArticle 22
Article 24bArticle 23
Article 25
Articles 26 and 27Articles 24 and 25
Annex IAnnex I
Annex IIAnnex II
Annex III
Annex IV