Annexes to COM(2022)644 - Amendment to the suspending of the Common Customs Tariff duties on certain agricultural and industrial products

Please note

This page contains a limited version of this dossier in the EU Monitor.

dossier COM(2022)644 - Amendment to the suspending of the Common Customs Tariff duties on certain agricultural and industrial products.
document COM(2022)644 EN
date December 19, 2022
ANNEX

‘ANNEX

Serial NumberCN codeTARICDescriptionRate of autonomous dutySupplementary UnitDate envisaged for mandatory review
0.6748ex 0709 53 0010Fresh or chilled chanterelles for treatment other than simple repacking for retail sale (1)  (2)0 %-31.12.2025
0.3348ex 0710 21 0010Peas in pods, of the species Pisum sativum of the variety Hortense axiphium, frozen, of a thickness of not more than 6 mm, to be used, in their pods, in the manufacture of prepared meals (1)  (2)0 %-31.12.2023
0.3349ex 0710 80 9550Bamboo shoots, frozen, not put up for retail sale0 %-31.12.2023
0.2829ex 0711 59 0011Mushrooms, excluding mushrooms of the genera Agaricus, Calocybe, Clitocybe, Lepista, Leucoagaricus, Leucopaxillus, Lyophyllum and Tricholoma, provisionally preserved in brine, in sulphur water, or in other preservative solutions, but unsuitable in that state for immediate consumption, for the food-canning industry (1)0 %-31.12.2026
0.2463ex 0712 32 00

ex 0712 33 00

ex 0712 34 00

ex 0712 39 00
10

10

31

31
Mushrooms, excluding mushrooms of the genus Agaricus, dried, whole or in identifiable slices or pieces, for treatment other than simple repacking for retail sale (1)  (2)0 %-31.12.2023
0.3347ex 0804 10 0030Dates, fresh or dried, for use in the manufacture (excluding packing) of products of drink or food industries (1)0 %-31.12.2023
0.24110811 90 50

0811 90 70

ex 0811 90 95
70Fruit of the genus Vaccinium, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter0 %-31.12.2023
0.3228ex 0811 90 9520Boysenberries, frozen, not containing added sugar, not put up for retail sale0 %-31.12.2023
0.2409ex 0811 90 9530Pineapple (Ananas comosus), in pieces, frozen0 %-31.12.2023
0.2408ex 0811 90 9540Rose-hips, uncooked or cooked by steaming or boiling in water, frozen, not containing added sugar or other sweetening matter0 %-31.12.2023
0.2864ex 1511 90 19

ex 1511 90 91

ex 1513 11 10

ex 1513 19 30

ex 1513 21 10

ex 1513 29 30
20

20

20

20

20

20
Palm oil, coconut (copra) oil, palm kernel oil, for the manufacture of:

—industrial monocarboxylic fatty acids of subheading 3823 19 10 ,

—methyl esters of fatty acids of heading 2915 or 2916 ,

—fatty alcohols of subheadings 2905 17 , 2905 19 and 3823 70 used for the manufacture of cosmetics, washing products or pharmaceutical products,

—fatty alcohols of subheading 2905 16 , pure or mixed, used for the manufacture of cosmetics, washing products or pharmaceutical products,
0 %-31.12.2024
—stearic acid of subheading 3823 11 00 ,

—goods of heading 3401 , or

—fatty acids with high purity of heading 2915  (1)
0.8443ex 1515 60 9910Microbial oil, refined or semi-refined, containing by weight 35 % or more but not more than 70 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid0 %-31.12.2024
0.3341ex 1515 90 9992Vegetable oil, refined or semi-refined, containing by weight 35 % or more but not more than 57 % of arachidonic acid or 35 % or more but not more than 50 % of docosahexaenoic acid0 %-31.12.2023
0.76861516 20 10Hydrogenated castor oil, so called 'opal-wax'0 %-31.12.2023
0.4708ex 1516 20 9620Jojoba oil, hydrogenated and interesterified, without any further chemical modification and not subjected to any texturisation process0 %-31.12.2024
0.4080ex 1517 90 9910Vegetable oil, refined, containing by weight 25 % or more but not more than 50 % arachidonic acid or 12 % or more but not more than 65 % docosahexaenoic acid and standardized with high oleic sunflower oil (HOSO)0 %-31.12.2026
0.8416ex 1518 00 9940Inedible used cooking oils consisting of mixtures of vegetable oils for use in the production of biodiesel (1)2 %-31.12.2024
0.6182ex 1901 90 99

ex 2106 90 98
39

45
Preparation in powder form containing by weight:

—15 % or more but not more than 35 % of wheat derived Maltodextrin,

—15 % or more but not more than 35 % of whey (milk serum),

—10 % or more but not more than 30 % of refined, bleached, deodorised and non-hydrogenated sunflower oil,

—10 % or more but not more than 30 % of blended, aged spray dried cheese,

—5 % or more but not more than 15 % of buttermilk and

—0,1 % or more but not more than 10 % of sodium caseinate, disodium phosphate, lactic acid
0 %-31.12.2023
0.2423ex 1902 30 10 ex 1903 00 0010

20
Transparent noodles, cut in pieces, obtained from beans (Vigna radiata (L.) Wilczek), not put up for retail sale0 %-31.12.2023
0.2866ex 2005 91 0010Bamboo shoots, prepared or preserved, in immediate packings of a net content of more than 5 kg0 %-31.12.2023
0.5884ex 2007 99 50

ex 2007 99 50

ex 2007 99 93
83

93

10
Mango puree concentrate, obtained by cooking:

—of the genus Mangifera spp.,

—with a sugar content by weight of not more than 30 %

for use in the manufacture of products of food and drink industry (1)
6 % (3)-31.12.2023
0.5875ex 2007 99 50

ex 2007 99 50
84

94
Papaya puree concentrate, obtained by cooking:

—of the genus Carica spp.,

—with a sugar content by weight of more than 13 % but not more than 30 %

for use in the manufacture of products of food and drink industry (1)
7.8 % (3)-31.12.2023
0.5867ex 2007 99 50

ex 2007 99 50
85

95
Guava puree concentrate, obtained by cooking:

—of the genus Psidium spp.,

—with a sugar content by weight of more than 13 % but not more than 30 %

for use in the manufacture of products of food and drink industry (1)
6 % (3)-31.12.2023
0.4716ex 2008 93 9120Sweetened dried cranberries, excluding packing alone as processing, for the manufacture of products of food processing industries (4)0 %-31.12.2027
0.5004ex 2008 99 4894Mango puree:

—not from concentrate,

—of the genus Mangifera spp.,

—of a Brix value of 14 or more, but not more than 20,

used in the manufacture of products of drink industry (1)
6 %-31.12.2023
0.4709ex 2008 99 49

ex 2008 99 99
30

40
Seedless boysenberry puree not containing added spirit, whether or not containing added sugar0 %-31.12.2025
0.5587ex 2008 99 49

ex 2008 99 99
70

11
Blanched vine leaves of the genus Karakishmish, in brine, containing by weight:

—more than 6 % of salt concentration,

—0,1 % or more but not more than 1,4 % of acidity expressed as citric acid monohydrate and

—whether or not but not more than 2 000 mg/kg of sodium benzoate according CODEX STAN 192-1995

for use in the manufacture of stuffed vine leaves with rice (1)
0 %-31.12.2027
0.6723ex 2008 99 9120Chinese water chestnuts (Eleocharis dulcis or Eleocharis tuberosa) peeled, washed, blanched, chilled and individually quick-frozen for use in the manufacture of products of food industry for treatment other than simple repacking (1)  (2)0 % (3)-31.12.2025
0.7767ex 2008 99 9935Frozen pulp from acai berries:

—hydrated and pasteurised,

—separated from the kernels by the addition of water,

—with a Brix value of less than 6, and

—with a sugar content of less than 5,6 %
0 %-31.12.2024
0.4992ex 2009 41 92

ex 2009 41 99
20

70
Pineapple juice:

—not from concentrate,

—of the genus Ananas,

—of a Brix value of 11 or more but not more than 16,

used in the manufacture of products of drink industry (1)
8 %-31.12.2025
0.4664ex 2009 49 3091Pineapple juice, other than in powder form:

—with a Brix value of more than 20 but not more than 67,

—a value of more than € 30 per 100 kg net weight,

—containing added sugar

used in the manufacture of products of food or drink industry (1)
0 %-31.12.2024
0.4623ex 2009 81 3110Cranberry juice concentrate:

—of a Brix value of 40 or more but not more than 66,

—in immediate packings of a content of 50 litres or more
0 %l31.12.2024
0.6356ex 2009 89 73

ex 2009 89 73
11

13
Passion fruit juice and passion fruit juice concentrate, whether or not frozen:

—with a Brix value of 13,7 or more but not more than 55,

—of a value of more than € 30 per 100 kg net weight,

—in immediate packings of a content of 50 litres or more, and

—with added sugar

for the use in the manufacture of products of food or drink industry (1)
0 %l31.12.2024
0.4159ex 2009 89 7920Frozen boysenberry juice concentrate with a Brix value of 61 or more, but not more than 67, in immediate packings of a content of 50 litres or more0 %l31.12.2023
0.6050ex 2009 89 7930Frozen acerola juice concentrate :

—with a Brix value of more than 48 but not more than 67,

—in immediate packings of a content of 50 litres or more
0 %l31.12.2023
0.5206ex 2009 89 7985Acai berry juice concentrate:

—of the species Euterpe oleracea,

—frozen,

—not sweetened,

—not in powder form,

—of a Brix value of 23 or more but not more than 32,

in immediate packings of a content of 10 kg or more
0 %-31.12.2026
0.6365ex 2009 89 97

ex 2009 89 97
21

29
Passion fruit juice and passion fruit juice concentrate, whether or not frozen:

—with a Brix value of 10 or more but not more than 13,7,

—of a value of more than € 30 per 100 kg net weight,

—in immediate packings of a content of 50 litres or more, and

—without added sugar

for the use in the manufacture of products of food or drink industry (1)
0 %L31.12.2024
0.4157ex 2009 89 9996Coconut water

—unfermented,

—not containing added spirit or sugar, and

—in immediate packing of a content of 20 litres or more (2)
0 %l31.12.2026
0.6152ex 2106 10 2020Soya protein concentrate having a protein content by weight, calculated on a dry weight basis, of 65 % or more but not more than 90 % in powder or textured form0 %-31.12.2023
0.3340ex 2106 10 2030Preparation on the base of soya protein isolate, containing by weight 6,6 % or more but not more than 8,6 % of calcium phosphate0 %-31.12.2023
0.7284ex 2106 90 92

ex 3504 00 90
50

10
Casein protein hydrolysate consisting of:

—by weight 20 % or more but not more than 70 % free amino acids, and

—peptones of which by weight more than 90 % having a molecular weight of not more than 2 000 Da
0 %-31.12.2027
0.5246ex 2519 90 1010Fused magnesia with a purity by weight of 94 % or more0 %-31.12.2026
0.6330ex 2707 50 00

ex 2707 99 80
20

10
Mixture of xylenol-isomers and ethyl phenol-isomers, with a total xylenol content by weight of 62 % or more but less than 95 %0 %-31.12.2024
0.6168ex 2707 99 9910Heavy and medium oils, whose aromatic content exceeds their non-aromatic content, for use as refinery feedstock to undergo one of the specific processes described in Additional note 5 to Chapter 27 (1)0 %-31.12.2023
0.8144ex 2710 12 2520Mixture of C6 aliphatic hydrocarbons (CAS RN 92112-69-1), containing by weight 60 % or more but not more than 80 % of n-hexane (CAS RN 110-54-3), with:

—a specific gravity of 0,666 or more but not more than 0,686,

—a total of carbonyl compounds of less than 1 ppm,

—a total of acetylenic compounds of less than 2 ppm
0 %-31.12.2025
0.7823ex 2710 19 81

ex 2710 19 99
30

50
Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing:

—90 % or more by weight of saturates, and

—not more than 0,03 % by weight of sulphur,

and with

—a viscosity index of 80 or more, but less than 120, and a

—a kinematic viscosity less than 5,0 cSt at 100 °C or more than 13,0 cSt at 100 °C
0 %-31.12.2023
0.7822ex 2710 19 81

ex 2710 19 99
40

60
Catalytically hydroisomerized and dewaxed base oil of hydrogenated, highly isoparaffinic hydrocarbons, containing:

—90 % or more by weight of saturates, and

—not more than 0,03 % by weight of sulphur,

with a viscosity index of 120 or more
0 %-31.12.2024
0.6495ex 2710 19 9920Catalytic de-waxed base oil, synthesised from gaseous hydrocarbons, followed by a heavy paraffin conversion process (HPC), containing:

—not more than 1 mg/kg of sulphur

—more than 99 % by weight of saturated hydrocarbons

—more than 75 % by weight of n- and iso-paraffinic hydrocarbons with a carbon chain length of 18 or more but not more than 50; and

—a kinematic viscosity at 40 °C of more than 6,5 mm2/s, or

—a kinematic viscosity at 40 °C of more than 11 mm2/s with a viscosity index of 120 or more
0 %-31.12.2024
0.7393ex 2712 90 9910Blend of 1-alkenes containing by weight 90 % or more 1-alkenes of a chain length of 24 carbon atoms or more but not more than 1 % 1-alkenes of a chain length of more than 70 carbon atoms0 %-31.12.2027
0.4531ex 2804 50 9040Tellurium (CAS RN 13494-80-9) of a purity by weight of 99,99 % or more, but not more than 99,999 %, based on metallic impurities measured by ICP analysis0 %-31.12.2023
0.80212804 70 10Red phosphorus0 %-31.12.2027
0.80222804 70 90Phosphorus, other than red phosphorus0 %-31.12.2023
0.6658ex 2805 12 0010Calcium with a purity of 98 % or more by weight, in powder or wire form (CAS RN 7440-70-2)0 %-31.12.2025
0.5609ex 2805 19 9020Lithium metal (CAS RN 7439-93-2) of a purity by weight of 98,8 % or more0 %-31.12.2027
0.2559ex 2805 30 1010Alloy of cerium and other rare-earth metals, containing by weight 47 % or more of cerium0 %-31.12.2023
0.49792805 30 21

2805 30 29

2805 30 31

2805 30 39

2805 30 40
Rare-earth metals, scandium and yttrium, of a purity by weight of 95 % or more0 %-31.12.2025
0.7769ex 2809 20 0010Aqueous solution of phosphoric acid (CAS RN 7664-38-2), containing by weight 85 % or more phosphoric acid0 %-31.12.2024
0.2407ex 2811 22 0010Silicon dioxide (CAS RN 7631-86-9) in the form of powder, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1)0 %-31.12.2023
0.6836ex 2811 22 0015Amorphous silicon dioxide (CAS RN 60676-86-0)

—in the form of powder

—of a purity by weight of 99,0 % or more

—with a median grain size of 0,7 μm or more, but not more than 2,1 μm

—where 70 % of the particles have a diameter of not more than 3 μm
0 %-31.12.2024
0.7292ex 2811 29 9010Tellurium dioxide (CAS RN 7446-07-3)0 %-31.12.2027
0.3308ex 2812 90 0010Nitrogen trifluoride (CAS RN 7783-54-2)0 %-31.12.2023
0.5747ex 2816 40 0010Barium hydroxide (CAS RN 17194-00-2)0 %-31.12.2027
0.7594ex 2818 10 1110Sol-Gel corundum (CAS RN 1302-74-5) with an aluminium oxide content of 99,6 % or more by weight, having a micro crystalline structure in the form of rods with an aspect ratio of 1,3 or more, but not more than 6,00 %-31.12.2023
0.5110ex 2818 10 9120Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:

—94 % or more, but less than 98,5 % of aluminium oxide,

—2 % (± 1,5 %) of magnesium oxide,

—1 % (± 0,6 %) of yttrium oxide,

and

—either 2 % (± 1,2 %) of lanthanum oxide, or

—2 % (± 1,2 %) of lanthanum oxide and neodymium oxide,

with less than 50 % of the total weight having a particle size of more than 10 mm
0 %-31.12.2025
0.8425ex 2818 10 9130Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1) and magnesium aluminate (CAS RN 12068-51-8), with a content by weight (calculated as oxides) of:

—92 % or more, but not more than 94 % of aluminium oxide, and

—7 % (± 1 %) of magnesium oxide
0 %-31.12.2027
0.4640ex 2818 20 0010Activated alumina with a specific surface area of at least 350 m2/g0 %-31.12.2024
0.6837ex 2818 30 0020Aluminium hydroxide (CAS RN 21645-51-2)

—in the form of powder,

—with a purity by weight of 99,5 % or more,

—with a decomposition point of 263 °C or more,

—with a particle size of 4 μm (± 1 μm),

—with a Total-Na2O-content by weight of not more than 0,06 %
0 %-31.12.2025
0.3306ex 2818 30 0030Aluminium hydroxide oxide in the form of boehmite or pseudoboehmite (CAS RN 1318-23-6)0 %-31.12.2023
0.5369ex 2819 90 9010Dichromium trioxide (CAS RN 1308-38-9) for use in metallurgy (1)0 %-31.12.2026
0.5752ex 2823 00 0010Titanium dioxide (CAS RN 13463-67-7):

—of a purity by weight of 99,9 % or more,

—with an average grain-size of 0,7 μm or more but not more than 2,1 μm
0 %-31.12.2027
0.5576ex 2825 10 0010Hydroxylammonium chloride (CAS RN 5470-11-1)0 %-31.12.2027
0.7897ex 2825 20 0010Lithium hydroxide monohydrate (CAS RN 1310-66-3)2.6 %-31.12.2023
0.38002825 30 00Vanadium oxides and hydroxides0 %-31.12.2026
0.3303ex 2825 50 0020Copper (I or II) oxide containing by weight 78 % or more of copper and not more than 0,03 % of chloride0 %-31.12.2023
0.6819ex 2825 50 0030Copper (II) oxide (CAS RN 1317-38-0), with a particle size of not more than 100 nm0 %-31.12.2025
0.5555ex 2825 60 0010Zirconium dioxide (CAS RN 1314-23-4)0 %-31.12.2027
0.7193ex 2825 70 0020Molybdic Acid (CAS RN 7782-91-4)0 %-31.12.2026
0.5055ex 2826 19 9010Tungsten hexafluoride (CAS RN 7783-82-6) with a purity by weight of 99,9 % or more0 %-31.12.2025
0.8296ex 2826 90 8030Lithium hexafluorophosphate (CAS RN 21324-40-3) with a purity by weight of 99 % or more2.7 %-31.12.2023
0.2865ex 2827 39 8510Copper monochloride (CAS RN 7758-89-6) of a purity by weight of 96 % or more but not more than 99 %0 %-31.12.2023
0.4180ex 2827 39 8520Antimony pentachloride (CAS RN 7647-18-9) of a purity by weight of 99 % or more0 %-31.12.2026
0.6143ex 2827 39 8540Barium chloride dihydrate (CAS RN 10326-27-9)0 %-31.12.2023
0.4423ex 2827 49 9010Hydrated zirconium dichloride oxide (CAS RN 7699-43-6)0 %-31.12.2023
0.6463ex 2827 60 0010Sodium iodide (CAS RN 7681-82-5)0 %-31.12.2024
0.7596ex 2828 10 0010Calcium hypochlorite (CAS RN 7778-54-3) having an active chlorine content of 65 % or more0 %-31.12.2023
0.3302ex 2830 10 0010Disodium tetrasulphide (CAS RN 12034-39-8), containing by weight 38 % or less of sodium calculated on the dry weight0 %-31.12.2023
0.3859ex 2833 29 8020Manganese sulphate monohydrate (CAS RN 10034-96-5)0 %-31.12.2023
0.4338ex 2835 10 0010Sodium hypophosphite monohydrate (CAS RN 10039-56-2)0 %-31.12.2027
0.6144ex 2835 10 0020Sodium hypophosphite (CAS RN 7681-53-0)0 %-31.12.2023
0.7452ex 2835 10 0030Aluminium Phosphinate (CAS RN 7784-22-7)0 %-31.12.2023
0.2524ex 2836 91 0020Lithium carbonate, containing one or more of the following impurities at the concentrations indicated:

—2 mg/kg or more of arsenic,

—200 mg/kg or more of calcium,

—200 mg/kg or more of chlorides,

—20 mg/kg or more of iron,

—150 mg/kg or more of magnesium,

—20 mg/kg or more of heavy metals,

—300 mg/kg or more of potassium,

—300 mg/kg or more of sodium,

—200 mg/kg or more of sulphates,

determined according to the methods specified in the European Pharmacopœia
0 %-31.12.2023
0.2863ex 2836 99 1730Zirconium (IV) basic carbonate (CAS RN 57219-64-4 or 37356-18-6) with a purity by weight of 96 % or more0 %-31.12.2023
0.3300ex 2837 19 0020Copper cyanide (CAS RN 544-92-3)0 %-31.12.2023
0.4078ex 2837 20 0010Tetrasodium hexacyanoferrate (II) (CAS RN 13601-19-9)0 %-31.12.2026
0.2861ex 2839 90 0020Calcium silicate (CAS RN 1344-95-2)0 %-31.12.2023
0.6632ex 2840 20 9010Zinc borate (CAS RN 12767-90-7)0 %-31.12.2025
0.7288ex 2841 50 0011Potassium dichromate (CAS RN 7778-50-9) with a purity by weight of 99 % or more, for use as intermediate for the production of chrome (1)2 %-31.12.2025
0.6142ex 2841 70 0010Diammonium tetraoxomolybdate(2-) (CAS RN 13106-76-8)0 %-31.12.2023
0.6482ex 2841 70 0030Hexaammonium heptamolybdate, anhydrous (CAS RN 12027-67-7) or as tetrahydrate (CAS RN 12054-85-2)0 %-31.12.2024
0.4323ex 2841 80 0010Diammonium wolframate (ammonium paratungstate) (CAS RN 11120-25-5)0 %-31.12.2027
0.8441ex 2841 80 0020Disodium tungstate (CAS RN 13472-45-2) with a:

—purity by weight of 99 % or more,

—chlorine content of less than 100 ppm
0 %-31.12.2027
0.7301ex 2841 90 3010Potassium metavanadate (CAS RN 13769-43-2)0 %-31.12.2027
0.5936ex 2841 90 8520Potassium titanium oxide (CAS RN 12056-51-8) in powder form with a purity of 99 % or more0 %-31.12.2023
0.4416ex 2842 10 0010Synthetic beta zeolite powder0 %-31.12.2023
0.4588ex 2842 10 0020Synthetic chabasite zeolite powder0 %-31.12.2024
0.7397ex 2842 10 0050Fluorphlogopite (CAS RN 12003-38-2)0 %-31.12.2027
0.7097ex 2842 10 0060Aluminosilicate (CAS RN 1318-02-1) with

—a purity by weight of 94 % or more,

—a zeolite structure of aluminophosphate-eighteen (AEI), and

—a phase purity of 90 % or more

for use in the manufacture of copper zeolite (1)
0 %-31.12.2026
0.4642ex 2842 90 1010Sodium selenate (CAS RN 13410-01-0)0 %-31.12.2024
0.32952845 10 00Heavy water (deuterium oxide) (Euratom) (CAS RN 7789-20-0)0 %-31.12.2023
0.41892845 40 00Helium-3 (CAS RN 14762-55-1)0 %-31.12.2026
0.32972845 90 10Deuterium and compounds thereof; hydrogen and compounds thereof, enriched in deuterium; mixtures and solutions containing these products (Euratom)0 %-31.12.2023
0.8237ex 2845 90 10104-(Tert-Butyl)-2-(2-(methyl-d3)propan-2-yl-1,1,1,3,3,3-d6)phenol (CAS RN 2342594-40-3) with a purity by weight of 98 % or more0 %-31.12.2026
0.4191ex 2845 90 9020Water enriched at a level of 95 % or more by weight with oxygen-18 (CAS RN 14314-42-2)0 %-31.12.2023
0.4190ex 2845 90 9030(13C)Carbon monoxide (CAS RN 1641-69-6)0 %-31.12.2026
0.8426ex 2845 90 9050Ytterbium oxide (CAS RN 1380743-42-9), with a purity by weight of 99 % or more, enriched to 99,0 % or more but not more than 99,8 % of Ytterbium-1760 %-31.12.2027
0.2859ex 2846 10 00

ex 3824 99 96
10

53
Rare-earth concentrate containing by weight 60 % or more but not more than 95 % of rare-earth oxides and not more than 1 % each of zirconium oxide, aluminium oxide or iron oxide, and having a loss on ignition of 5 % or more by weight0 %-31.12.2023
0.3296ex 2846 10 0020Dicerium tricarbonate (CAS RN 537-01-9), whether or not hydrated0 %-31.12.2023
0.3420ex 2846 10 0030Cerium lanthanum carbonate, whether or not hydrated0 %-31.12.2023
0.32272846 90 30

2846 90 40

2846 90 50

2846 90 60

2846 90 90
Compounds, inorganic or organic, of rare-earth metals, of yttrium or of scandium or of mixtures of these metals, other than those of subheading 2846 10 000 %-31.12.2023
0.3418ex 2850 00 2010Silane (CAS RN 7803-62-5)0 %-31.12.2023
0.5497ex 2850 00 2040Germanium tetrahydride (CAS RN 7782-65-2)0 %-31.12.2026
0.7302ex 2850 00 2060Disilane (CAS RN 1590-87-0)0 %-31.12.2027
0.7555ex 2850 00 2070Cubic Boron nitride (CAS RN 10043-11-5)0 %-31.12.2023
0.3419ex 2850 00 2080Arsine (CAS RN 7784-42-1) with a purity by volume of 99,999 % or more0 %-31.12.2024
0.4492ex 2850 00 6010Sodium azide (CAS RN 26628-22-8)0 %-31.12.2023
0.3421ex 2853 90 9020Phosphine (CAS RN 7803-51-2)0 %-31.12.2023
0.8282ex 2903 19 00201,3-Dichloropropane (CAS RN 142-28-9) with a purity by weight of 99 % or more0 %-31.12.2026
0.66332903 42 00Difluoromethane (CAS RN 75-10-5)0 %-31.12.2025
0.6007ex 2903 44 0010Pentafluoroethane (CAS RN 354-33-6)0 %-31.12.2024
0.3674ex 2903 45 00301,1,1,2-Tetrafluoroethane (CAS RN 811-97-2) conforming to the following specifications:

—not more than 600 ppm by weight of HFC-134 (1,1,2,2-tetrafluoroethane),

—not more than 5 ppm by weight of HFC-143a (1,1,1-trifluoroethane),

—not more than 2 ppm by weight of HFC-125 (pentafluoroethane),

—not more than 100 ppm by weight of HCFC-124 (1-chloro-1,2,2,2- tetrafluoroethane),

—not more than 30 ppm by weight of CFC-114 (1,2-dichlorotetrafluoroethane),

—not more than 50 ppm by weight of CFC-114a (1,1-dichlorotetrafluoroethane),

—not more than 250 ppm by weight of HCFC-133a (1-chloro-2,2,2-trifluoroethane),
0 %-31.12.2024
—not more than 2 ppm by weight of HCFC-22 (chlorodifluoromethane),

—not more than 2 ppm by weight of CFC-115 (chloropentafluoroethane),

—not more than 2 ppm by weight of CFC-12 (dichlorodifluoromethane),

—not more than 20 ppm by weight of HCC-40 (methyl chloride),

—not more than 20 ppm by weight of HFC-245cb (1,1,1,2,2-pentafluoropropane),

—not more than 20 ppm by weight of H-12B1 (chlorodifluorobromomethane),

—not more than 20 ppm by weight of HFC-32 (difluoromethane),

—not more than 15 ppm by weight of HCFC-31 (chlorofluoromethane),
—not more than 10 ppm by weight of HFC-152a (1,1-difluoroethane),

—not more than 20 ppm by weight of HFO-1131 (1 chloro-2-fluoroethylene),

—not more than 20 ppm by weight of HCFO-1122 (1-chloro-2,2-difluoroethylene),

—not more than 3 ppm by weight of HFO-1234yf (2,3,3,3-tetrafluoropropene),

—not more than 3 ppm by weight of HFO-1243zf (3,3,3-trifluoropropene),

—not more than 3 ppm by weight of HCFO-1122a (1-chloro-1,2-difluoroethylene),
—not more than 4,5 ppm by weight of HFO-1234yf + HCFO-1122a + HFO-1243zf (2,3,3,3-tetrafluoropropene + 1-chloro-1,2-difluoroethylene + 3,3,3-trifluoropropene),

—not more than 3 ppm by weight of any individual unspecified/unknown chemical,

—not more than 10 ppm by weight of all unspecified/unknown chemicals combined,

—not more than 10 ppm by weight of water,

—with an acidity level of not more than 0,1 ppm by weight,

—without halides,

—not more than 0,01 % by volume of high boilers,
—without any odour (no malodour),

for use with or without further purification as an under GMP (Good Manufacturing Practice) produced inhalation grade of HFC-134a in the manufacture of a propellant for medical aerosols whose contents are absorbed in the oral or nasal cavities, and/or the respiratory tract (1)
0.2542ex 2903 47 00201,1,1,3,3-Pentafluoropropane (HFC-245fa) (CAS RN 460-73-1)0 %-31.12.2023
0.2854ex 2903 49 3010Carbon tetrafluoride (tetrafluoromethane) (CAS RN 75-73-0)0 %-31.12.2023
0.2852ex 2903 49 3020Perfluoroethane (CAS RN 76-16-4)0 %-31.12.2023
0.6077ex 2903 49 30301H-Perfluorohexane (CAS RN 355-37-3)0 %-31.12.2023
0.5803ex 2903 51 00102,3,3,3-Tetrafluoroprop-1-ene (2,3,3,3-tetrafluoropropene) (CAS RN 754-12-1)0 %-31.12.2027
0.4517ex 2903 51 0020Trans-1,3,3,3-tetrafluoroprop-1-ene (Trans-1,3,3,3-tetrafluoropropene) (CAS RN 29118-24-9)0 %-31.12.2023
0.6076ex 2903 59 0020(Perfluorobutyl) ethylene (CAS RN 19430-93-4)0 %-31.12.2023
0.4066ex 2903 59 0030Hexafluoropropene (CAS RN 116-15-4)0 %-31.12.2026
0.7324ex 2903 59 00401,1,2,3,4,4-Hexafluorobuta-1,3-diene (CAS RN 685-63-2)0 %-31.12.2027
0.7974ex 2903 69 19403-(Bromomethyl)pentane (CAS RN 3814-34-4) with a purity by weight of 99 % or more0 %-31.12.2025
0.8318ex 2903 69 1950Vinyl bromide (CAS RN 593-60-2) with a purity by weight of 98 % or more, or as a solution in tetrahydrofuran (CAS RN 109-99-9) containing by weight 23 % or more, but not more than 26 % vinylbromide0 %-31.12.2027
0.8151ex 2903 69 19601-Bromo-2-methylpropane (CAS RN 78-77-3) with a purity by weight of 99 % or more0 %-31.12.2026
0.7895ex 2903 72 0010Dichloro-1,1,1-trifluoroethane (CAS RN 306-83-2) with a purity by weight of 99 % or more0 %-31.12.2024
0.3675ex 2903 77 60101,1,1-Trichlorotrifluoroethane (CAS RN 354-58-5)0 %-31.12.2023
0.5212ex 2903 77 9010Chlorotrifluoroethylene (CAS RN 79-38-9)0 %-31.12.2026
0.7513ex 2903 78 0010Octafluoro-1,4-diiodobutane (CAS RN 375-50-8)0 %-31.12.2023
0.7755ex 2903 78 0020Trifluoroiodomethane (CAS RN 2314-97-8)0 %-31.12.2024
0.6485ex 2903 79 3010Trans-1-chloro-3,3,3-trifluoropropene (CAS RN 102687-65-0)0 %-31.12.2024
0.7826ex 2903 79 30301-Bromo-5-chloropentane (CAS RN 54512-75-3) with a purity by weight of 99 % or more0 %-31.12.2024
0.5765ex 2903 89 8050Chlorocyclopentane (CAS RN 930-28-9)0 %-31.12.2027
0.7304ex 2903 89 8060Octafluorocyclobutane (CAS RN 115-25-3)0 %-31.12.2027
0.6611ex 2903 99 80154-Bromo-2-chloro-1-fluorobenzene (CAS RN 60811-21-4)0 %-31.12.2025
0.3410ex 2903 99 80201,2-Bis(pentabromophenyl)ethane (CAS RN 84852-53-9)0 %-31.12.2023
0.8017ex 2903 99 80252,2'-Dibromobiphenyl (CAS RN 13029-09-9) with a purity by weight of 95 % or more0 %-31.12.2025
0.8018ex 2903 99 80352-Bromo-9,9'-spirobi[9H-fluoren] (CAS RN 171408-76-7) with a purity by weight of 95 % or more0 %-31.12.2025
0.3411ex 2903 99 80402,6-Dichlorotoluene (CAS RN 118-69-4), of a purity by weight of 99 % or more and containing:

—0,001 mg/kg or less of tetrachlorodibenzodioxines,

—0,001 mg/kg or less of tetrachlorodibenzofurans,

—0,2 mg/kg or less of tetrachlorobiphenyls
0 %-31.12.2023
0.8076ex 2903 99 80451-Bromo-4-(trans-4-propylcyclohexyl)benzene (CAS RN 86579-53-5) with a purity by weight of 95 % or more0 %-31.12.2025
0.4529ex 2903 99 8050Fluorobenzene (CAS RN 462-06-6)0 %-31.12.2023
0.8101ex 2903 99 80551-Bromo-4-(trans-4-ethylcyclohexyl)benzene (CAS RN 91538-82-8) with a purity by weight of 95 % or more0 %-31.12.2025
0.8166ex 2903 99 80652,6-Difluorobenzyl bromide (CAS RN 85118-00-9) with a purity by weight of 97 % or more0 %-31.12.2026
0.8177ex 2903 99 80701-[Chloro(phenyl)methyl]-2-methylbenzene (CAS RN 41870-52-4) with a purity by weight of 99 % or more0 %-31.12.2026
0.6235ex 2903 99 80753-Chloro-alpha,alpha,alpha-trifluorotoluene (CAS RN 98-15-7)0 %-31.12.2024
0.5917ex 2903 99 80801-Bromo-3,4,5-trifluorobenzene (CAS RN 138526-69-9)0 %-31.12.2023
0.3407ex 2904 10 0030Sodium p-styrenesulphonate (CAS RN 2695-37-6)0 %-31.12.2024
0.4686ex 2904 10 0050Sodium 2-methylprop-2-ene-1-sulphonate (CAS RN 1561-92-8)0 %-31.12.2024
0.3409ex 2904 20 0010Nitromethane (CAS RN 75-52-5)0 %-31.12.2025
0.3391ex 2904 20 0020Nitroethane (CAS RN 79-24-3)0 %-31.12.2027
0.3408ex 2904 20 00301-Nitropropane (CAS RN 108-03-2)0 %-31.12.2025
0.3390ex 2904 20 00402-Nitropropane (CAS RN 79-46-9)0 %-31.12.2024
0.2526ex 2904 99 00201-Chloro-2,4-dinitrobenzene (CAS RN 97-00-7)0 %-31.12.2024
0.6612ex 2904 99 0025Difluoromethanesulphonyl chloride (CAS RN 1512-30-7)0 %-31.12.2025
0.3388ex 2904 99 0030Tosyl chloride (CAS RN 98-59-9)0 %-31.12.2024
0.6613ex 2904 99 00351-Fluoro-4-nitrobenzene (CAS RN 350-46-9)0 %-31.12.2025
0.5745ex 2904 99 00404-Chlorobenzenesulphonyl chloride (CAS RN 98-60-2)0 %-31.12.2027
0.7507ex 2904 99 00452-Nitrobenzenesulfonyl Chloride (CAS RN 1694-92-4)0 %-31.12.2023
0.6001ex 2904 99 0050Ethanesulphonyl chloride (CAS RN 594-44-5)0 %-31.12.2023
0.7957ex 2904 99 00552,4-Dichloro-1,3-dinitro-5-(trifluoromethyl)benzene (CAS RN 29091-09-6) with a purity by weight of 96 % or more0 %-31.12.2025
0.6407ex 2904 99 00604,4'-Dinitrostilbene-2,2'-disulfonic acid (CAS RN 128-42-7)0 %-31.12.2024
0.8160ex 2904 99 00654-Nitrotoluene-2-sulphonic acid (CAS RN 121-03-9) in powder form, with a purity by weight of 80 % or more and a content of water by weight of 15 % or more0 %-31.12.2026
0.6270ex 2904 99 00701-Chloro-4-nitrobenzene (CAS RN 100-00-5)0 %-31.12.2024
0.6560ex 2904 99 00801-Chloro-2-nitrobenzene (CAS RN 88-73-3)0 %-31.12.2024
0.6186ex 2905 11 0010Methanol (CAS RN 67-56-1) with a purity of 99,85 % by weight or more0 %-31.12.2023
0.2967ex 2905 19 0011Potassium tert-butanolate (CAS RN 865-47-4), whether or not in the form of a solution in tetrahydrofuran according to note 1e) to Chapter 29 of the CN0 %-31.12.2023
0.6118ex 2905 19 0020Butyltitanate monohydrate, homopolymer (CAS RN162303-51-7)0 %-31.12.2023
0.6119ex 2905 19 0025Tetra-(2-ethylhexyl) titanate (CAS RN 1070-10-6)0 %-31.12.2023
0.3384ex 2905 19 00302,6-Dimethylheptan-4-ol (CAS RN 108-82-7)0 %-31.12.2023
0.4793ex 2905 19 00402,6-Dimethylheptan-2-ol (CAS RN 13254-34-7)0 %-31.12.2024
0.5534ex 2905 19 0070Titanium tetrabutanolate (CAS RN 5593-70-4)0 %-31.12.2027
0.5533ex 2905 19 0080Titanium tetraisopropoxide (CAS RN 546-68-9)0 %-31.12.2027
0.6002ex 2905 19 0085Titanium tetraethanolate (CAS RN 3087-36-3)0 %-31.12.2023
0.6464ex 2905 22 0010Linalool (CAS RN 78-70-6) containing by weight 90,7 % or more of (3R)-(-)-Linalool (CAS RN 126-91-0)0 %-31.12.2024
0.7114ex 2905 22 00203,7-Dimethyloct-6-en-1-ol (CAS RN 106-22-9)0 %-31.12.2026
0.7388ex 2905 29 9010Cis-hex-3-en-1-ol (CAS RN 928-96-1)0 %-31.12.2027
0.7674ex 2905 32 0020(2S)-Propane-1,2-diol (CAS RN 4254-15-3) with a purity by weight of 98 % or more0 %-31.12.2023
0.5255ex 2905 39 95302,4,7,9-Tetramethyl-4,7-decanediol (CAS RN 17913-76-7)0 %-31.12.2026
0.5847ex 2905 39 9540Decane-1,10-diol (CAS RN 112-47-0)0 %-31.12.2027
0.5908ex 2905 39 95502-Methyl-2-propylpropane-1,3-diol (CAS RN 78-26-2)0 %-31.12.2023
0.7701ex 2905 39 9560Dodecane-1,12-diol (CAS RN 5675-51-4)0 %-31.12.2024
0.7914ex 2905 39 95702-Methylpropane-1,3-diol (CAS RN 2163-42-0) with a purity by weight of 98 % or more0 %-31.12.2024
0.8370ex 2905 39 9580Pentane-1,5-diol (CAS RN 111-29-5) with a purity by weight of 97 % or more0 %-31.12.2027
0.4624ex 2905 59 98202,2,2-Trifluoroethanol (CAS RN 75-89-8)0 %-31.12.2024
0.3378ex 2906 19 0010Cyclohex-1,4-ylenedimethanol (CAS RN 105-08-8)0 %-31.12.2023
0.3380ex 2906 19 00204,4’-Isopropylidenedicyclohexanol (CAS RN 80-04-6)0 %-31.12.2023
0.6257ex 2906 19 00504-tert-Butylcyclohexanol (CAS RN 98-52-2)0 %-31.12.2024
0.8231ex 2906 19 00605-Methyl-2-(prop-1-en-2-yl)cyclohexanol, mixture of isomers (CAS RN 7786-67-6) with a purity by weight of 90 % or more0 %-31.12.2026
0.3681ex 2906 29 00201-Hydroxymethyl-4-methyl-2,3,5,6-tetrafluorobenzene (CAS RN 79538-03-7)0 %-31.12.2023
0.7373ex 2906 29 00502,2'-(m-Phenylene)dipropan-2-ol (CAS RN 1999-85-5)0 %-31.12.2027
0.7806ex 2906 29 00603-[3-(Trifluoromethyl)phenyl]propan-1-ol (CAS RN 78573-45-2)0 %-31.12.2024
0.7963ex 2906 29 00701,2,3,4-Tetrahydro-1-naphthol (CAS RN 529-33-9) with a purity by weight of 95 % or more0 %-31.12.2025
0.6757ex 2906 29 00802-Bromo-5-iodo-benzenemethanol (CAS RN 946525-30-0) with a purity by weight of 98 % or more0 %-31.12.2024
0.5855ex 2906 29 00852-Phenylethanol (CAS RN 60-12-8) with a purity by weight of 95 % or more0 %-31.12.2027
0.6329ex 2907 12 0020Mixture of meta-cresol (CAS RN 108-39-4) and para-cresol (CAS RN 106-44-5) with a purity by weight of 99 % or more0 %-31.12.2024
0.6559ex 2907 12 0030p-Cresol (CAS RN 106-44-5)0 %-31.12.2024
0.5216ex 2907 15 90102-Naphthol (CAS RN 135-19-3)0 %-31.12.2026
0.6256ex 2907 19 10102,6-Xylenol (CAS RN 576-26-1)0 %-31.12.2024
0.4480ex 2907 19 9020Biphenyl-4-ol (CAS RN 92-69-3)0 %-31.12.2023
0.7753ex 2907 19 90302-Methyl-5-(propan-2-yl)phenol (CAS RN 499-75-2)0 %-31.12.2024
0.3372ex 2907 21 0010Resorcinol (CAS RN 108-46-3)0 %-31.12.2023
0.6026ex 2907 29 00156,6'-Di-tert-butyl-4,4'-butylidenedi-m-cresol (CAS RN 85-60-9)0 %-31.12.2023
0.3369ex 2907 29 00204,4'-(3,3,5-Trimethylcyclohexylidene)diphenol (CAS RN 129188-99-4)0 %-31.12.2023
0.6454ex 2907 29 00254-Hydroxybenzyl alcohol (CAS RN 623-05-2)0 %-31.12.2024
0.3367ex 2907 29 00304,4',4"-Ethylidynetriphenol (CAS RN 27955-94-8)0 %-31.12.2023
0.5432ex 2907 29 00452-Methylhydroquinone (CAS RN 95-71-6)0 %-31.12.2026
0.3368ex 2907 29 00506,6',6"-Tricyclohexyl-4,4',4"-butane-1,1,3-triyltri(m-cresol) (CAS RN 111850-25-0)0 %-31.12.2023
0.6558ex 2907 29 00652,2'-Methylenebis(6-cyclohexyl-p-cresol) (CAS RN 4066-02-8)0 %-31.12.2024
0.2584ex 2907 29 00702,2',2",6,6',6"-Hexa-tert-butyl-α,α',α"-(mesitylene-2,4,6-triyl)tri-p-cresol (CAS RN 1709-70-2)0 %-31.12.2023
0.7402ex 2907 29 0075Biphenyl-4,4'-diol (CAS RN 92-88-6)0 %-31.12.2023
0.3848ex 2907 29 0085Phloroglucinol whether or not hydrated0 %-31.12.2023
0.5903ex 2908 19 0010Pentafluorophenol (CAS RN 771-61-9)0 %-31.12.2023
0.5914ex 2908 19 00204,4'-(Perfluoroisopropylidene)diphenol (CAS RN 1478-61-1)0 %-31.12.2023
0.6260ex 2908 19 00304-Chlorophenol (CAS RN 106-48-9)0 %-31.12.2024
0.6782ex 2908 19 00403,4,5-Trifluorophenol (CAS RN 99627-05-1)0 %-31.12.2025
0.6915ex 2908 19 00504-Fluorophenol (CAS RN 371-41-5)0 %-31.12.2025
0.7720ex 2908 19 00602,2',6,6'-Tetrabromo-4,4'-isopropylidenediphenol (CAS RN 79-94-7)0 %-31.12.2024
0.8204ex 2908 19 00702,3,6-Trifluorophenol (CAS RN 113798-74-6) with a purity by weight of 98 % or more0 %-31.12.2026
0.3361ex 2909 19 9020Bis(2-chloroethyl) ether (CAS RN 111-44-4)0 %-31.12.2023
0.3359ex 2909 19 9030Mixture of isomers of nonafluorobutyl methyl ether or nonafluorobutyl ethyl ether, of a purity by weight of 99 % or more0 %-31.12.2023
0.4035ex 2909 19 90503-Ethoxy-perfluoro-2-methylhexane (CAS RN 297730-93-9)0 %-31.12.2026
0.5407ex 2909 20 00108-Methoxycedrane (CAS RN 19870-74-7)0 %-31.12.2026
0.5503ex 2909 30 38201,1’-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] (CAS RN 21850-44-2)0 %-31.12.2026
0.6649ex 2909 30 38301,1'-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7)0 %-31.12.2025
0.7454ex 2909 30 38404-Benzyloxybromobenzene (CAS RN 6793-92-6)0 %-31.12.2023
0.7828ex 2909 30 38502-(1-Adamantyl)-4-Bromoanisole (CAS RN 104224-63-7) with a purity by weight of 99 % or more0 %-31.12.2024
0.4710ex 2909 30 90102-(Phenylmethoxy)naphthalene (CAS RN 613-62-7)0 %-31.12.2024
0.7176ex 2909 30 9015{[(2,2-Dimethylbut-3-yn-1-yl)oxy]methyl}benzene (CAS RN 1092536-54-3)0 %-31.12.2026
0.4711ex 2909 30 90201,2-Bis(3-methyl-phenoxy)ethane (CAS RN 54914-85-1)0 %-31.12.2024
0.7115ex 2909 30 90251,2-Diphenoxyethane (CAS RN 104-66-5) in the form of powder or as an aqueous dispersion containing by weight 30 % or more but not more than 60 % of 1,2-diphenoxyethane0 %-31.12.2026
0.5117ex 2909 30 90303,4,5-Trimethoxytoluene (CAS RN 6443-69-2)0 %-31.12.2025
0.7580ex 2909 30 90351-Chloro-2-(4-ethoxybenzyl)-4-iodobenzene (CAS RN 1103738-29-9)0 %-31.12.2023
0.6614ex 2909 30 90401-Chloro-2,5-dimethoxybenzene (CAS RN 2100-42-7)0 %-31.12.2025
0.8167ex 2909 30 90455-Bromo-1,3-difluoro-2-(trifluoromethoxy)benzene (CAS RN 115467-07-7) with a purity by weight of 95 % or more0 %-31.12.2026
0.6783ex 2909 30 90501-Ethoxy-2,3-difluorobenzene (CAS RN 121219-07-6)0 %-31.12.2025
0.6784ex 2909 30 90601-Butoxy-2,3-difluorobenzene (CAS RN 136239-66-2)0 %-31.12.2025
0.6994ex 2909 30 9070O,O,O-1,3,5-trimethylresorcinol (CAS RN 621-23-8)0 %-31.12.2026
0.7706ex 2909 44 00102-Propoxyethanol (CAS RN 2807-30-9)0 %-31.12.2024
0.6927ex 2909 49 80101-Propoxypropan-2-ol (CAS RN 1569-01-3)0 %-31.12.2026
0.8241ex 2909 49 80303,4-Dimethoxybenzyl alcohol (CAS RN 93-03-8) with a purity by weight of 98 % or more0 %-31.12.2026
0.3484ex 2909 50 00104-(2-Methoxyethyl)phenol (CAS RN 56718-71-9)0 %-31.12.2023
0.7846ex 2909 50 00402-Methoxy-4-(trifluoromethoxy)phenol (CAS RN 166312-49-8) with a purity by weight of 98 % or more0 %-31.12.2024
0.3682ex 2909 60 9010Bis(α,α-dimethylbenzyl) peroxide (CAS RN 80-43-3)0 %-31.12.2023
0.6489ex 2909 60 90303,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane (CAS RN 24748-23-0), dissolved in isoparaffinic hydrocarbons0 %-31.12.2024
0.7910ex 2909 60 9050Solution of 3,6,9-(ethyl and/or propyl)-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonanes (CAS RN 1613243-54-1) in mineral spirits (CAS RN 1174522-09-8), containing by weight 25 % or more, but not more than 41 % of the hexoxonanes0 %-31.12.2024
0.7744ex 2910 90 00102-[(2-Methoxyphenoxy)methyl]oxirane (CAS RN 2210-74-4)0 %-31.12.2024
0.5940ex 2910 90 00151,2-Epoxycyclohexane (CAS RN 286-20-4)0 %-31.12.2023
0.7672ex 2910 90 0025Phenyloxirane (CAS RN 96-09-3)0 %-31.12.2023
0.2649ex 2910 90 00302,3-Epoxypropan-1-ol (glycidol) (CAS RN 556-52-5)0 %-31.12.2023
0.8042ex 2910 90 0040[(2R)-Oxiran-2-yl]methyl 3-nitrobenzenesulphonate (CAS RN 115314-17-5) with a purity by weight of 97 % or more0 %-31.12.2025
0.6660ex 2910 90 00502,3-Epoxypropyl phenyl ether (CAS RN 122-60-1)0 %-31.12.2025
0.4361ex 2910 90 0080Allyl glycidyl ether (CAS RN 106-92-3)0 %-31.12.2026
0.7116ex 2912 19 0010Undecanal (CAS RN 112-44-7)0 %-31.12.2026
0.8073ex 2912 19 0020Acrylaldehyde (CAS RN 107-02-8) with a purity by weight of 98 % or more0 %-31.12.2025
0.6968ex 2912 29 00152,6,6-Trimethylcyclohexenecarbaldehyde (alpha-beta isomers mixture) (CAS RN 52844-21-0)0 %-31.12.2026
0.7314ex 2912 29 0035Cinnamaldehyde (CAS RN 104-55-2)0 %-31.12.2027
0.5755ex 2912 29 00504-Isobutylbenzaldehyde (CAS RN 40150-98-9)0 %-31.12.2023
0.7612ex 2912 29 0055Cyclohex-3-ene-1-carbaldehyde (CAS RN 100-50-5)0 %-31.12.2023
0.6072ex 2912 29 00704-tert-Butylbenzaldehyde (CAS RN 939-97-9)0 %-31.12.2023
0.6073ex 2912 29 00804-Isopropylbenzaldehyde (CAS RN 122-03-2)0 %-31.12.2023
0.81472912 42 00Ethylvanillin (3-ethoxy-4-hydroxybenzaldehyde)0 %-31.12.2025
0.3479ex 2912 49 00103-Phenoxybenzaldehyde (CAS RN 39515-51-0)0 %-31.12.2023
0.5135ex 2912 49 0030Salicylaldehyde (CAS RN 90-02-8)0 %-31.12.2025
0.6678ex 2912 49 00403-Hydroxy-p-anisaldehyde (CAS RN 621-59-0)0 %-31.12.2025
0.7353ex 2912 49 00502,6-Dihydroxybenzaldehyde (CAS RN 387-46-2)0 %-31.12.2027
0.7712ex 2913 00 00102-Nitrobenzaldehyde (CAS RN 552-89-6)0 %-31.12.2024
0.8328ex 2913 00 00204-(Difluoromethoxy)-3-hydroxybenzaldehyde (CAS RN 151103-08-1) with a purity by weight of 98 % or more0 %-31.12.2024
0.4228ex 2914 19 9020Heptan-2-one (CAS RN 110-43-0)0 %-31.12.2027
0.4274ex 2914 19 90303-Methylbutanone (CAS RN 563-80-4)0 %-31.12.2027
0.4275ex 2914 19 9040Pentan-2-one (CAS RN 107-87-9)0 %-31.12.2027
0.7554ex 2914 19 9060Zinc acetylacetonate (CAS RN 14024-63-6)0 %-31.12.2023
0.7568ex 2914 29 0015Oestr-5(10)-ene-3,17-dione (CAS RN 3962-66-1)0 %-31.12.2023
0.3475ex 2914 29 0020Cyclohexadec-8-enone (CAS RN 3100-36–5)0 %-31.12.2023
0.7450ex 2914 29 0025Cyclohex-2-enone (CAS RN 930-68-7)0 %-31.12.2023
0.4933ex 2914 29 0030(R)-p-Mentha-1(6),8-dien-2-one (CAS RN 6485-40-1)0 %-31.12.2025
0.8015ex 2914 29 00354-(trans-4-Propylcyclohexyl)cyclohexanone (CAS RN 82832-73-3) with a purity by weight of 95 % or more0 %-31.12.2025
0.3480ex 2914 29 0040Camphor0 %-31.12.2023
0.8058ex 2914 29 00454-Propylcyclohexan-1-one (CAS RN 40649-36-3) with a purity by weight of 95 % or more0 %-31.12.2025
0.7389ex 2914 29 00801-(Cedr-8-en-9-yl)ethanone (CAS RN 32388-55-9)0 %-31.12.2024
0.6265ex 2914 39 00152,6-Dimethyl-1-indanone (CAS RN 66309-83-9)0 %-31.12.2024
0.6447ex 2914 39 00251,3-Diphenylpropane-1,3-dione (CAS RN 120-46-7)0 %-31.12.2024
0.4227ex 2914 39 0030Benzophenone (CAS RN 119-61-9)0 %-31.12.2027
0.4429ex 2914 39 00504-Phenylbenzophenone (CAS RN 2128-93-0)0 %-31.12.2023
0.4428ex 2914 39 00604-Methylbenzophenone (CAS RN 134-84-9)0 %-31.12.2023
0.5739ex 2914 39 0070Benzil (CAS RN 134-81-6)0 %-31.12.2024
0.5535ex 2914 39 00804'-Methylacetophenone (CAS RN 122-00-9)0 %-31.12.2027
0.8288ex 2914 40 9010Benzoin (CAS RN 119-53-9) with a purity by weight of 99 % or more0 %-31.12.2026
0.7824ex 2914 50 00151,1-Dimethoxyacetone (CAS RN 6342-56-9) with a purity by weight of 98 % or more0 %-31.12.2024
0.8168ex 2914 50 00184'-Hydroxyacetophenone (CAS RN 99-93-4) with a purity by weight of 99 % or more0 %-31.12.2026
0.4932ex 2914 50 00203'-Hydroxyacetophenone (CAS RN 121-71-1)0 %-31.12.2025
0.8179ex 2914 50 00231-[2-(Oxiran-2-ylmethoxy)phenyl]-3-phenylpropan-1-one (CAS RN 22525-95-7) with a purity by weight of 99 % or more0 %-31.12.2026
0.5943ex 2914 50 00254'-Methoxyacetophenone (CAS RN 100-06-1)0 %-31.12.2023
0.8195ex 2914 50 00281,1'-{(2-Hydroxypropane-1,3-diyl)bis[oxy(6-hydroxybenzene-2,1-diyl)]}diethanone (CAS RN 16150-44-0) with a purity by weight of 98 % or more0 %-31.12.2026
0.6762ex 2914 50 00337-Hydroxy-3,4-dihydro-1(2H)-naphthalenone (CAS RN 22009-38-7) with a purity by weight of 98 % or more0 %-31.12.2024
0.7797ex 2914 50 00352-Hydroxy-1-[4-[4-(2-hydroxy-2-methylpropanoyl)phenoxy]phenyl]-2-methylpropan-1-one (CAS-RN 71868-15-0)0 %-31.12.2024
0.5904ex 2914 50 00362,7-Dihydroxy-9-fluorenone (CAS RN 42523-29-5)0 %-31.12.2023
0.5435ex 2914 50 00404-(4-Hydroxyphenyl)butan-2-one (CAS RN 5471-51-2)0 %-31.12.2026
0.5809ex 2914 50 00453,4-Dihydroxybenzophenone (CAS RN 10425-11-3)0 %-31.12.2027
0.4235ex 2914 50 00602,2-Dimethoxy-2-phenylacetophenone (CAS RN 24650-42-8)0 %-31.12.2027
0.4385ex 2914 50 00802',6'-Dihydroxyacetophenone (CAS RN 699-83-2)0 %-31.12.2023
0.2647ex 2914 69 80102-Ethylanthraquinone (CAS RN 84-51-5)0 %-31.12.2023
0.2643ex 2914 69 80301,4-Dihydroxyanthraquinone (CAS RN 81-64-1)0 %-31.12.2023
0.5430ex 2914 69 8040p-Benzoquinone (CAS RN 106-51-4)0 %-31.12.2023
0.6481ex 2914 69 8050Reaction mass of 2-(1,2-dimethylpropyl)anthraquinone (CAS RN 68892-28-4) and 2-(1,1-dimethylpropyl)anthraquinone (CAS RN 32588-54-8)0 %-31.12.2024
0.7736ex 2914 79 00182-Chloro-1-cyclopropylethanone (CAS RN 7379-14-8)0 %-31.12.2024
0.5782ex 2914 79 00202,4'-Difluorobenzophenone (CAS RN 342-25-6)0 %-31.12.2027
0.7732ex 2914 79 00235-Chloro-2-hydroxybenzophenone (CAS RN 85-19-8)0 %-31.12.2024
0.7751ex 2914 79 0027(2-Chloro-5-iodo-phenyl)-(4-fluoro-phenyl)-methanone (CAS RN 915095-86-2)0 %-31.12.2024
0.7467ex 2914 79 00305-Methoxy-1-[4-(trifluoromethyl)phenyl]pentan-1-one (CAS RN 61718-80-7)0 %-31.12.2023
0.8338ex 2914 79 0033(4R)-4-(2-Fluorophenyl)-3,4-dihydro-2H-naphthalen-1-one (CAS RN 1234356-88-7) with a purity by weight of 99 % or more0 %-31.12.2027
0.7442ex 2914 79 00351-[4-(Benzyloxy)phenyl]-2-bromopropan-1-one (CAS RN 35081-45-9)0 %-31.12.2023
0.3474ex 2914 79 0040Perfluoro(2-methylpentan-3-one) (CAS RN 756-13-8)0 %-31.12.2023
0.2640ex 2914 79 00503'-Chloropropiophenone (CAS RN 34841-35-5)0 %-31.12.2023
0.4948ex 2914 79 00604'-tert-Butyl-2’,6’-dimethyl-3',5'-dinitroacetophenone (CAS RN 81-14-1)0 %-31.12.2026
0.5237ex 2914 79 00704-Chloro-4'-hydroxybenzophenone (CAS RN 42019-78-3)0 %-31.12.2026
0.6120ex 2914 79 0080Tetrachloro-p-benzoquinone (CAS RN 118-75-2)0 %-31.12.2023
0.7955ex 2915 24 0010Acetic anhydride (CAS RN 108-24-7) with a purity by weight of 97 % or more0 %-31.12.2025
0.6155ex 2915 39 00252-Methylcyclohexyl acetate (CAS RN 5726-19-2)0 %-31.12.2023
0.7433ex 2915 39 0035Cis-3-hexenyl acetate (CAS RN 3681-71-8) with a purity by weight of 95 % or more0 %-31.12.2027
0.2957ex 2915 39 0040tert-Butyl acetate (CAS RN 540-88-5)0 %-31.12.2023
0.7423ex 2915 39 00454-tert-Butylcyclohexyl acetate (CAS RN 32210-23-4) with a purity by weight of 95 % or more0 %-31.12.2027
0.5119ex 2915 39 0060Dodec-8-enyl acetate (CAS RN 28079-04-1)0 %-31.12.2025
0.5121ex 2915 39 0065Dodeca-7,9-dienyl acetate (CAS RN 54364-62-4)0 %-31.12.2025
0.5120ex 2915 39 0070Dodec-9-enyl acetate (CAS RN 16974-11-1)0 %-31.12.2025
0.5289ex 2915 39 0075Isobornyl acetate (CAS RN 125-12-2)0 %-31.12.2026
0.5301ex 2915 39 00801-Phenylethyl acetate (CAS RN 93-92-5)0 %-31.12.2026
0.5909ex 2915 39 00852-tert-Butylcyclohexyl acetate (CAS RN 88-41-5)0 %-31.12.2023
0.7834ex 2915 40 0010Ethyl trichloroacetate (CAS RN 515-84-4) with a purity by weight of 98 % or more0 %-31.12.2024
0.7830ex 2915 40 0020Sodium trichloroacetate (CAS RN 650-51-1) with a purity by weight of 96 % or more0 %-31.12.2024
0.5858ex 2915 60 1920Ethyl butyrate (CAS RN 105-54-4) with a purity by weight of 95 % or more0 %-31.12.2027
0.7540ex 2915 70 4010Methyl palmitate (CAS RN 112-39-0)0 %-31.12.2023
0.7541ex 2915 90 3010Methyl laurate (CAS RN 111-82-0)0 %-31.12.2025
0.7899ex 2915 90 7018Myristic acid, lithium salt (CAS RN 20336-96-3) with a purity by weight of 95 % or more0 %-31.12.2024
0.7407ex 2915 90 7020Methyl (R)-2-fluoropropionate (CAS RN 146805-74-5)0 %-31.12.2027
0.7542ex 2915 90 7025Methyl octanoate (CAS RN 111-11-5), methyl decanoate (CAS RN 110-42-9) or methyl myristate (CAS RN 124-10-7)0 %-31.12.2023
0.6003ex 2915 90 7027Triethyl orthoformate (CAS RN 122-51-0) with a purity by weight of 99 % or more0 %-31.12.2023
0.5767ex 2915 90 70303,3-Dimethylbutyryl chloride (CAS RN 7065-46-5)0 %-31.12.2027
0.8154ex 2915 90 7033Ethyl 8-bromooctanoate (CAS RN 29823-21-0) with a purity by weight of 98 % or more0 %-31.12.2026
0.5536ex 2915 90 70352,2-Dimethylbutanoyl chloride (CAS RN 5856-77-9)0 %-31.12.2023
0.8311ex 2915 90 7038Pelargonic acid (CAS RN 112-05-0) with a purity by weight of 95 % or more0 %-31.12.2026
0.8423ex 2915 90 7043Trifluoroacetic anhydride (CAS RN 407-25-0) with a purity by weight of 98 % or more0 %-31.12.2027
0.6255ex 2915 90 7045Trimethyl orthoformate (CAS RN 149-73-5)0 %-31.12.2024
0.4791ex 2915 90 7050Allyl heptanoate (CAS RN 142-19-8)0 %-31.12.2024
0.4954ex 2915 90 7060Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0)0 %-31.12.2025
0.2585ex 2916 12 00102-tert-Butyl-6-(3-tert-butyl-2-hydroxy-5-methylbenzyl)-4-methylphenyl acrylate (CAS RN 61167-58-6)0 %-31.12.2023
0.3977ex 2916 12 00402,4-Di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl)ethyl]phenylacrylate (CAS RN 123968-25-2)0 %-31.12.2023
0.3466ex 2916 13 0030Zinc monomethacrylate powder (CAS RN 63451-47-8) whether or not containing not more than 17 % by weight of manufacturing impurities0 %-31.12.2025
0.3468ex 2916 13 0040Zinc Dimethacrylate (CAS RN 13189-00-9) in the form of powder with a purity by weight of 99 % or more, with not more than 1 % of a stabiliser0 %-31.12.2023
0.2638ex 2916 14 00102,3-Epoxypropyl methacrylate (CAS RN 106-91-2)0 %-31.12.2023
0.6190ex 2916 14 0020Ethyl methacrylate (CAS RN 97-63-2)0 %-31.12.2023
0.2951ex 2916 19 9520Methyl 3,3-dimethylpent-4-enoate (CAS RN 63721-05-1)0 %-31.12.2023
0.5991ex 2916 19 9540Sorbic acid (CAS RN 110-44-1) for use in the manufacture of animal feeds (1)0 %-31.12.2023
0.6238ex 2916 19 9550Methyl 2-fluoroacrylate (CAS RN 2343-89-7)0 %-31.12.2024
0.7980ex 2916 19 9560Methyl 2-fluoroprop-2-enoate (CAS RN 2343-89-7) with a purity by weight of 93 % or more, whether or not with not more than 7 % of the stabiliser 2,6-di-tert-butyl-p-cresol (CAS RN 128-37-0) and Tetrabutylammonium nitrite (CAS RN 26501-54-2)0 %-31.12.2025
0.7940ex 2916 19 9570Methyl 3-methyl-2-butenoate (CAS RN 924-50-5) with a purity by weight of 99,0 % or more0 %-31.12.2025
0.7023ex 2916 20 0015Transfluthrin (ISO) (CAS RN 118712-89-3)0 %-31.12.2026
0.7931ex 2916 20 0025Cyclohexanecarbonyl chloride (CAS RN 2719-27-9) with a purity by weight of 99 % or more0 %-31.12.2025
0.7933ex 2916 20 00352-Cyclopropylacetic acid (CAS RN 5239-82-7) with a purity by weight of 95 % or more0 %-31.12.2025
0.8057ex 2916 20 0045Cyclopentanecarboxylic acid (CAS RN 3400-45-1) with a purity by weight of 98 % or more0 %-31.12.2025
0.3463ex 2916 20 0050Ethyl 2,2-dimethyl-3-(2-methylpropenyl)cyclopropanecarboxylate (CAS RN 97-41-6)0 %-31.12.2023
0.8336ex 2916 20 0055Methyl 2,2-dimethyl-3-(2-methylprop-1-en-1-yl)cyclopropane-1-carboxylate (CAS RN 5460-63-9) with a purity by weight of 90 % or more0 %-31.12.2027
0.4931ex 2916 20 00603-Cyclohexylpropionic acid (CAS RN 701-97-3)0 %-31.12.2025
0.8352ex 2916 20 0065Tefluthrin (ISO)(CAS RN 79538-32-2) with a purity by weight of 96 % or more0 %-31.12.2027
0.7531ex 2916 20 0070Cyclopropanecarbonyl chloride (CAS RN 4023-34-1)0 %-31.12.2023
0.5421ex 2916 31 0010Benzyl benzoate (CAS RN 120-51-4)0 %-31.12.2026
0.8214ex 2916 31 0020Phenethyl benzoate (CAS RN 94-47-3) with a purity by weight of 95 % or more0 %-31.12.2026
0.6248ex 2916 39 90133,5-Dinitrobenzoic acid (CAS RN 99-34-3)0 %-31.12.2024
0.5214ex 2916 39 90152-Chloro-5-nitrobenzoic acid (CAS RN 2516-96-3)0 %-31.12.2026
0.7929ex 2916 39 90163-Fluoro-5-iodo-4-methylbenzoic acid (CAS RN 861905-94-4) with a purity by weight of 97 % or more0 %-31.12.2025
0.2636ex 2916 39 90203,5-Dichlorobenzoyl chloride (CAS RN 2905-62-6)0 %-31.12.2023
0.7845ex 2916 39 90226-Bromo-2-fluoro-3-(trifluoromethyl)benzoic acid (CAS RN 1026962-68-4) with a purity by weight of 95 % or more0 %-31.12.2024
0.6557ex 2916 39 9023(2,4,6-Trimethylphenyl)acetyl chloride (CAS RN 52629-46-6)0 %-31.12.2024
0.4951ex 2916 39 90252-Methyl-3-(4-Fluorophenyl)-propionyl chloride (CAS RN 1017183-70-8)0 %-31.12.2026
0.7827ex 2916 39 9027Methyl 6-Bromo-2-naphthoate (CAS RN 33626-98-1) with a purity by weight of 99 % or more0 %-31.12.2024
0.4930ex 2916 39 90302,4,6-Trimethylbenzoyl chloride (CAS RN 938-18-1)0 %-31.12.2025
0.5944ex 2916 39 9035Methyl 4-tert-butylbenzoate (CAS RN 26537-19-9)0 %-31.12.2023
0.6794ex 2916 39 90414-Bromo-2,6-difluorobenzoyl chloride (CAS RN 497181-19-8)0 %-31.12.2025
0.7734ex 2916 39 90432-(3,5-Bis(trifluoromethyl)phenyl)-2-methylpropanoic acid (CAS RN 289686-70-0)0 %-31.12.2024
0.6121ex 2916 39 90483-Fluorobenzoyl chloride (CAS RN 1711-07-5)0 %-31.12.2023
0.2634ex 2916 39 90503,5-Dimethylbenzoyl chloride (CAS RN 6613-44-1)0 %-31.12.2023
0.6661ex 2916 39 90535-Iodo-2-methylbenzoic acid (CAS RN 54811-38-0)0 %-31.12.2025
0.4238ex 2916 39 90554-tert-Butylbenzoic acid (CAS RN 98-73-7)0 %-31.12.2027
0.7678ex 2916 39 90572-Phenylprop-2-enoic acid (CAS RN 492-38-6)0 %-31.12.2023
0.8169ex 2916 39 90632-Phenylbutyric acid (CAS RN 90-27-7) with a purity by weight of 99 % or more0 %-31.12.2026
0.8369ex 2916 39 9067Nitrobenzoic acid (CAS RN 62-23-7) with a purity by weight of 99 % or more0 %-31.12.2027
0.3462ex 2916 39 9070Ibuprofen (INN) (CAS RN 15687-27-1)0 %-31.12.2023
0.7117ex 2916 39 9073(2,4-Dichlorophenyl)acetyl chloride (CAS RN 53056-20-5)0 %-31.12.2026
0.5541ex 2916 39 9075m-Toluic acid (CAS RN 99-04-7)0 %-31.12.2027
0.8039ex 2916 39 9078(2,5-Dibromophenyl)acetic acid (CAS RN 203314-28-7) with a purity by weight of 98,0 % or more0 %-31.12.2025
0.5543ex 2916 39 9085(2,4,5-Trifluorophenyl)acetic acid (CAS RN 209995-38-0)0 %-31.12.2027
0.3457ex 2917 11 0020Bis(p-methylbenzyl) oxalate (CAS RN 18241-31-1)0 %-31.12.2023
0.4746ex 2917 11 0030Cobalt oxalate (CAS RN 814-89-1)0 %-31.12.2024
0.7563ex 2917 12 0020Bis(3,4-epoxycyclohexylmethyl) adipate (CAS RN 3130-19-6)0 %-31.12.2023
0.4684ex 2917 19 1010Dimethyl malonate (CAS RN 108-59-8)0 %-31.12.2024
0.5602ex 2917 19 1020Diethyl malonate (CAS RN 105-53-3)0 %-31.12.2027
0.6089ex 2917 19 8015Dimethyl but-2-ynedioate (CAS RN 762-42-5)0 %-31.12.2023
0.4790ex 2917 19 8030Ethylene brassylate (CAS RN 105-95-3)0 %-31.12.2024
0.7451ex 2917 19 8035Diethyl methylmalonate (CAS RN 609-08-5)0 %-31.12.2023
0.7880ex 2917 19 8045Iron fumarate (CAS RN 141-01-5) with a purity by weight of 93 % or more0 %-31.12.2024
0.4918ex 2917 19 8050Tetradecanedioic acid (CAS RN 821-38-5)0 %-31.12.2025
0.8302ex 2917 19 8055Maleic acid (CAS RN 110-16-7) with a purity by weight of 99 % or more3.2 %-31.12.2023
0.3454ex 2917 19 8070Itaconic acid (CAS RN 97-65-4)0 %-31.12.2023
0.2631ex 2917 20 00301,4,5,6,7,7-Hexachloro-8,9,10-trinorborn-5-ene-2,3-dicarboxylic anhydride (CAS RN 115-27-5)0 %-31.12.2023
0.2627ex 2917 20 00403-Methyl-1,2,3,6-tetrahydrophthalic anhydride (CAS RN 5333-84-6)0 %-31.12.2023
0.2954ex 2917 34 0010Diallyl phthalate (CAS RN 131-17-9)0 %-31.12.2023
0.4945ex 2917 39 8520Dibutyl-1,4-benzenedicarboxylate (CAS RN 1962-75-0)0 %-31.12.2025
0.6796ex 2917 39 8525Naphthalene-1,8-dicarboxylic anhydride (CAS RN 81-84-5)0 %-31.12.2025
0.3640ex 2917 39 8530Benzene-1,2:4,5-tetracarboxylic dianhydride (CAS RN 89-32-7)0 %-31.12.2025
0.6800ex 2917 39 85351-Methyl-2-nitroterephthalate (CAS RN 35092-89-8)0 %-31.12.2025
0.6123ex 2917 39 8540Dimethyl 2-nitroterephthalate (CAS RN 5292-45-5)0 %-31.12.2023
0.8255ex 2917 39 85453-(4-Chlorophenyl)glutaric acid (CAS RN 35271-74-0) with a purity by weight of 98 % or more0 %-31.12.2026
0.6553ex 2917 39 85501,4,5,8-Naphthalenetetracarboxylic acid-1,8-monoanhydride (CAS RN 52671-72-4)0 %-31.12.2024
0.6554ex 2917 39 8560Perylene-3,4:9,10-tetracarboxylic dianhydride(CAS RN 128-69-8)0 %-31.12.2024
0.6366ex 2918 19 3010Cholic acid (CAS RN 81-25-4)0 %-31.12.2024
0.6367ex 2918 19 30203-α,12-α-Dihydroxy-5-β-cholan-24-oic acid (deoxycholic acid) (CAS RN 83-44-3)0 %-31.12.2024
0.2950ex 2918 19 9820L-Malic acid (CAS RN 97-67-6)0 %-31.12.2023
0.7702ex 2918 19 9830Ethyl 1-hydroxycyclopentanecarboxylate (CAS RN 41248-23-1)0 %-31.12.2024
0.7703ex 2918 19 9840Ethyl 1-hydroxycyclohexanecarboxylate (CAS RN 1127-01-1)0 %-31.12.2024
0.7907ex 2918 19 985012-Hydroxyoctadecanoic acid (CAS RN 106-14-9) with a purity by weight of 90 % or more for use in the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters (1)0 %-31.12.2024
0.8044ex 2918 19 9860(R)-tert-Butyl 2'-(1-hydroxyethyl)-3-methyl-[1,1'-biphenyl]-4-carboxylate (CAS RN 1246560-92-8) with a purity by weight of 98 % or more0 %-31.12.2025
0.8422ex 2918 19 9870Rac-tert-butyl 3-hydroxy-4-pentenoate (CAS RN 122763-67-1) with a purity by weight of 98 % or more0 %-31.12.2027
0.3637ex 2918 29 0010Monohydroxynaphthoic acids0 %-31.12.2023
0.5781ex 2918 29 0035Propyl 3,4,5-trihydroxybenzoate (CAS RN 121-79-9)0 %-31.12.2027
0.8008ex 2918 29 00403-Hydroxy-4-nitrobenzoic acid (CAS RN 619-14-7) with a purity by weight of more than 96,5 %0 %-31.12.2025
0.3638ex 2918 29 0050Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2)0 %-31.12.2023
0.5220ex 2918 29 0060Methyl-, ethyl-, propyl- or butyl esters of 4-hydroxybenzoic acid or their sodium salts (CAS RN 35285-68-8, 99-76-3, 5026-62-0, 94-26-8, 94-13-3, 35285-69-9, 120-47-8, 36457-20-2 or 4247-02-3)0 %-31.12.2026
0.6456ex 2918 29 00703,5-Diiodosalicylic acid (CAS RN 133-91-5)0 %-31.12.2024
0.7605ex 2918 30 0025(E)-1-ethoxy-3-oxobut-1-en-1-olate; 2-methylpropan-1-olate; titanium(4+) (CAS RN 83877-91-2)0 %-31.12.2023
0.4427ex 2918 30 0030Methyl-2-benzoylbenzoate (CAS RN 606-28-0)0 %-31.12.2023
0.7864ex 2918 30 00353-Oxocyclobutane-1-carboxylic acid with a purity by weight of 98 % or more (CAS RN 23761-23-1)0 %-31.12.2024
0.8075ex 2918 30 0045Methyl 5-oxo-6,7,8,9-tetrahydro-5H-benzo[7]annulene-2-carboxylate (CAS RN 150192-89-5) with a purity by weight of 96 % or more0 %-31.12.2025
0.8256ex 2918 30 0055Methyl 3-oxo-pentanoate (CAS RN 30414-53-0) with a purity by weight of 98 % or more0 %-31.12.2026
0.6250ex 2918 30 00604-Oxovaleric acid (CAS RN 123-76-2)0 %-31.12.2024
0.8374ex 2918 30 0065Methyl (3-oxo-2-pentylcyclopentyl)acetate (CAS RN 24851-98-7) with a purity by weight of 99 % or more0 %-31.12.2027
0.6455ex 2918 30 00702-[4-Chloro-3-(chlorosulphonyl)benzoyl]benzoic acid (CAS RN 68592-12-1)0 %-31.12.2024
0.8342ex 2918 30 0075Methyl 2-((1S,2R)-3-oxo-2-pentylcyclopentyl)acetate (CAS RN 151716-35-7) with a purity by weight of 99 % or more0 %-31.12.2027
0.7062ex 2918 30 0080Methyl benzoylformate (CAS RN 15206-55-0)0 %-31.12.2026
0.7344ex 2918 30 00852-Fluoro-5-formylbenzoic acid (CAS RN 550363-85-4) with a purity by weight of 98 % or more0 %-31.12.2024
0.5857ex 2918 30 0087Ethyl acetoacetate (CAS RN 141-97-9) with a purity by weight of 98 % or more0 %-31.12.2027
0.2946ex 2918 99 90103,4-Epoxycyclohexylmethyl 3,4-epoxycyclohexanecarboxylate (CAS RN 2386-87-0)0 %-31.12.2023
0.6814ex 2918 99 90133-Methoxy-2-methylbenzoyl chloride (CAS RN 24487-91-0)0 %-31.12.2025
0.5856ex 2918 99 9015Ethyl 2,3-epoxy-3-phenylbutyrate (CAS RN 77-83-8)0 %-31.12.2027
0.6901ex 2918 99 9018Ethyl 2-hydroxy-2-(4-phenoxyphenyl)propanoate (CAS RN 132584-17-9)0 %-31.12.2025
0.2949ex 2918 99 9020Methyl 3-methoxyacrylate (CAS RN 5788-17-0)0 %-31.12.2024
0.6147ex 2918 99 9025Methyl (E)-3-methoxy-2-(2-chloromethylphenyl)-2-propenoate (CAS RN 117428-51-0)0 %-31.12.2023
0.7256ex 2918 99 9027Ethyl 3-ethoxypropionate (CAS RN 763-69-9)0 %-31.12.2027
0.2948ex 2918 99 9030Methyl 2-(4-hydroxyphenoxy)propionate (CAS RN 96562-58-2)0 %-31.12.2023
0.7597ex 2918 99 9033Vanillic Acid (CAS RN 121-34-6) containing

—not more than 10 ppm of Palladium (CAS RN 7440-05-3),

—not more than 10 ppm of bismuth (CAS RN 7440-69-9),

—not more than 14 ppm of formaldehyde (CAS RN 50-00-0),

—not more than 1,3 % by weight of 3,4-dihydroxybenzoic acid (CAS RN 99-50-3),

—not more than 0,5 % by weight of vanillin (CAS RN 121-33-5)
0 %-31.12.2023
0.6342ex 2918 99 9035p-Anisic acid (CAS RN 100-09-4)0 %-31.12.2024
0.7358ex 2918 99 9038Diclofop-methyl (ISO) (CAS RN 51338-27-3)0 %-31.12.2027
0.2945ex 2918 99 9040trans-4-Hydroxy-3-methoxycinnamic acid (CAS RN 1135-24-6)0 %-31.12.2023
0.7934ex 2918 99 9043Vanillic acid (CAS RN 121-34-6) with a purity by weight of 98,5 % or more0 %-31.12.2025
0.6224ex 2918 99 90454-Methylcatechol dimethyl acetate (CAS RN 52589-39-6)0 %-31.12.2024
0.8066ex 2918 99 90482-Bromo-5-methoxybenzoic acid (CAS RN 22921-68-2) with a purity by weight of 98 % or more0 %-31.12.2025
0.2947ex 2918 99 9050Methyl 3,4,5-trimethoxybenzoate (CAS RN 1916-07-0)0 %-31.12.2023
0.6552ex 2918 99 9055Stearyl glycyrrhetinate(CAS RN 13832-70-7)0 %-31.12.2024
0.2943ex 2918 99 90603,4,5-Trimethoxybenzoic acid (CAS RN 118-41-2)0 %-31.12.2023
0.6523ex 2918 99 9065Acetic acid, difluoro[1,1,2,2-tetrafluoro-2-(pentafluoroethoxy)ethoxy]-, ammonium salt (CAS RN 908020-52-0)0 %-31.12.2024
0.4742ex 2918 99 9070Allyl-(3-methylbutoxy)acetate (CAS RN 67634-00-8)0 %-31.12.2024
0.6747ex 2918 99 9085Trinexapac-Ethyl (ISO) (CAS RN 95266-40-3) with a purity by weight of 96 % or more0 %-31.12.2025
0.7462ex 2919 90 0015Benzene-1,3-diyl tetraphenyl bis(phosphate) (CAS RN 57583-54-7)0 %-31.12.2023
0.7723ex 2919 90 0025Triphenyl phosphate (CAS RN 115-86-6)0 %-31.12.2024
0.2940ex 2919 90 0030Aluminium hydroxybis[2,2’-methylenebis(4,6-di-tert-butylphenyl)phosphate] (CAS RN 151841-65-5)0 %-31.12.2023
0.2942ex 2919 90 00352,2'-Methylenebis(4,6-di-tert-butylphenyl) phosphate, monosodium salt (CAS RN 85209-91-2) with a purity by weight of 95 % or more, with particles greater than 100μm used in the manufacture of nucleating agents with a particle size (D90) no greater than 35 μm as measured by a light scattering technique (1)0 %-31.12.2023
0.3867ex 2919 90 0040Tri-n-hexylphosphate (CAS RN 2528-39-4)0 %-31.12.2023
0.5495ex 2919 90 0050Triethyl phosphate (CAS RN 78-40-0)0 %-31.12.2026
0.6188ex 2919 90 0060Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)0 %-31.12.2023
0.6413ex 2919 90 0070Tris(2-butoxyethyl)phosphate (CAS RN 78-51-3)0 %-31.12.2024
0.6253ex 2920 19 00302,2‘-Oxybis(5,5-dimethyl-1,3,2-dioxaphosphorinane)-2,2‘-disulphide (CAS RN 4090-51-1)0 %-31.12.2024
0.2941ex 2920 19 0040Tolclofos-methyl (ISO) (CAS RN 57018-04-9) with a purity by weight of 96 % or more0 %-31.12.2023
0.36342920 23 00Trimethyl phosphite (CAS RN 121-45-9)0 %-31.12.2023
0.41582920 24 00Triethyl phosphite (CAS RN 122-52-1)0 %-31.12.2026
0.2626ex 2920 29 0010O,O’-Dioctadecyl pentaerythritol bis(phosphite) (CAS RN 3806-34-6)0 %-31.12.2023
0.5038ex 2920 29 0020Tris(methylphenyl)phosphite (CAS RN 25586-42-9)0 %-31.12.2025
0.5045ex 2920 29 0040Bis(2,4-dicumylphenyl)pentaerythritol diphosphite (CAS RN 154862-43-8)0 %-31.12.2025
0.6004ex 2920 29 0050Fosetyl-aluminium (CAS RN 39148-24-8)0 %-31.12.2023
0.7898ex 2920 29 00802,4,8,10-Tetrakis(1,1-dimethylethyl)-6-(2-ethylhexyloxy)-12H dibenzo[d,g][1,3,2]dioxaphosphocin (CAS RN 126050-54-2) with a purity by weight of 95 % or more0 %-31.12.2024
0.3635ex 2920 90 1010Diethyl sulphate (CAS RN 64-67-5)0 %-31.12.2023
0.7559ex 2920 90 1015Ethyl methyl carbonate (CAS RN 623-53-0)3.2 %-31.12.2023
0.2605ex 2920 90 1020Diallyl 2,2'-oxydiethyl dicarbonate (CAS RN 142-22-3)0 %-31.12.2023
0.3685ex 2920 90 1040Dimethyl carbonate (CAS RN 616-38-6)0 %-31.12.2023
0.8297ex 2920 90 1045Ethylene carbonate (CAS RN 96-49-1) with a purity by weight of 99 % or more3.2 %-31.12.2023
0.3868ex 2920 90 1050Di-tert-butyl dicarbonate (CAS RN 24424-99-5)0 %-31.12.2023
0.8298ex 2920 90 1055Vinylene carbonate (CAS RN 872-36-6) with a purity by weight of 99,9 % or more3.2 %-31.12.2023
0.8299ex 2920 90 1065Vinyl ethylene carbonate (CAS RN 4427-96-7) with a purity by weight of 99 % or more3.2 %-31.12.2023
0.7588ex 2920 90 7020Diethyl phosphorochloridate (CAS RN 814-49-3)0 %-31.12.2023
0.7465ex 2920 90 70302-Isopropoxy-4,4,5,5-tetramethyl-1,3,2-dioxaborolane (CAS RN 61676-62-8)0 %-31.12.2023
0.5947ex 2920 90 7060Bis(neopentylglycolato)diboron (CAS RN 201733-56-4)0 %-31.12.2023
0.6598ex 2920 90 7080Bis(pinacolato)diboron (CAS RN 73183-34-3)0 %-31.12.2025
0.5668ex 2921 13 0010Aqueous solution containing by weight 63 % or more, but not more than 67 % of 2-(N,N-Diethylamino)ethylchloride hydrochloride0 %-31.12.2024
0.3629ex 2921 19 9920Ethyl(2-methylallyl)amine (CAS RN 18328-90-0)0 %-31.12.2023
0.3631ex 2921 19 9930Allylamine (CAS RN 107-11-9)0 %-31.12.2023
0.7073ex 2921 19 99452-Chloro-N-(2-chloroethyl)ethanamine hydrochloride (CAS RN 821-48-7)0 %-31.12.2026
0.6269ex 2921 19 9980Taurine (CAS RN 107-35-7), with 0,5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)0 %-31.12.2024
0.8045ex 2921 29 0015(2S)-Propane-1,2-diamine dihydrochloride (CAS RN 19777-66-3) with a purity by weight of 98 % or more0 %-31.12.2025
0.3630ex 2921 29 0020Tris[3-(dimethylamino)propyl]amine (CAS RN 33329-35-0)0 %-31.12.2023
0.8067ex 2921 29 0025N,N'-Diallylpropane-1,3-diamine dihydrochloride (CAS RN 205041-15-2) with a purity by weight or 96 % or more0 %-31.12.2025
0.3625ex 2921 29 0030Bis[3-(dimethylamino)propyl]methylamine (CAS RN 3855-32-1)0 %-31.12.2023
0.8170ex 2921 29 0035Pentamethylenediamine (CAS RN 462-94-2) with a purity by weight of 99 % or more, also as an aqueous solution containing by weight more than 50 % of pentamethylenediamine0 %-31.12.2026
0.4917ex 2921 29 0040Decamethylenediamine (CAS RN 646-25-3)0 %-31.12.2025
0.5256ex 2921 29 0050N'-[3-(Dimethylamino)propyl]-N,N-dimethylpropane-1,3-diamine (CAS RN 6711-48-4)0 %-31.12.2026
0.7947ex 2921 29 0070N,N,N',N'-Tetramethylethylenediamine (CAS RN 110-18-9) with a purity by weight of 99 % or more0 %-31.12.2025
0.7488ex 2921 30 10102-(4-(Cyclopropanecarbonyl)phenyl)-2-methylpropanoic acid cyclohexylamine salt (CAS RN 1690344-90-1)0 %-31.12.2023
0.5768ex 2921 30 9940Cyclopropylamine (CAS RN 765-30-0)0 %-31.12.2027
0.7750ex 2921 30 9950Bicyclo[1.1.1]pentan-1-amine hydrochloride (CAS RN 22287-35-0)0 %-31.12.2024
0.3909ex 2921 42 0025Sodium hydrogen 2-aminobenzene-1,4-disulphonate (CAS RN 24605-36-5)0 %-31.12.2023
0.3978ex 2921 42 00352-Nitroaniline (CAS RN 88-74-4)0 %-31.12.2023
0.3979ex 2921 42 00452,4,5-Trichloroaniline (CAS RN 636-30-6)0 %-31.12.2023
0.2620ex 2921 42 00503-Aminobenzenesulfonic acid (CAS RN 121-47-1)0 %-31.12.2023
0.7739ex 2921 42 00554-Chloroaniline (CAS RN 106-47-8)0 %-31.12.2024
0.3623ex 2921 42 00702-Aminobenzene-1,4-disulfonic acid (CAS RN 98-44-2)0 %-31.12.2024
0.3622ex 2921 42 00804-Chloro-2-nitroaniline (CAS RN 89-63-4)0 %-31.12.2023
0.3687ex 2921 42 00853,5-Dichloroaniline (CAS RN 626-43-7)0 %-31.12.2023
0.5616ex 2921 42 00862,5-Dichloroaniline (CAS RN 95-82-9)0 %-31.12.2027
0.5603ex 2921 42 0087N-Methylaniline (CAS RN 100-61-8)0 %-31.12.2027
0.5617ex 2921 42 00883,4-Dichloroaniline-6-sulphonic acid (CAS RN 6331-96-0)0 %-31.12.2027
0.2617ex 2921 43 00204-Amino-6-chlorotoluene-3-sulphonic acid (CAS RN 88-51-7)0 %-31.12.2023
0.8433ex 2921 43 00256-Chloro-α,α,α-trifluoro-m-toluidine (CAS RN 121-50-6) with a purity by weight of 98 % or more0 %-31.12.2027
0.2615ex 2921 43 00303-Nitro-p-toluidine (CAS RN 119-32-4)0 %-31.12.2023
0.3980ex 2921 43 00404-Aminotoluene-3-sulphonic acid (CAS RN 88-44-8)0 %-31.12.2024
0.5124ex 2921 43 00603-Aminobenzotrifluoride (CAS RN 98-16-8)0 %-31.12.2025
0.7583ex 2921 43 00705-Bromo-4-fluoro-2-methylaniline (CAS RN 627871-16-3)0 %-31.12.2023
0.3621ex 2921 44 0020Diphenylamine (CAS RN 122-39-4)0 %-31.12.2023
0.2618ex 2921 45 00202-Aminonaphthalene-1,5-disulphonic acid (CAS RN 117-62-4) or one of its sodium salts (CAS RN 19532-03-7) or (CAS RN 62203-79-6)0 %-31.12.2024
0.7628ex 2921 45 0030(5 or 8)-Aminonaphthalene-2-sulphonic acid (CAS RN 51548-48-2)0 %-31.12.2023
0.5994ex 2921 45 00507-Aminonaphthalene-1,3,6-trisulphonic acid (CAS RN 118-03-6)0 %-31.12.2024
0.7316ex 2921 45 00601-Naphthylamine (CAS RN 134-32-7)0 %-31.12.2027
0.7629ex 2921 45 00802-Aminonaphthalene-1-sulphonic acid (CAS RN 81-16-3)0 %-31.12.2023
0.3618ex 2921 49 0020Pendimethalin (ISO) (CAS RN 40487-42-1)3.5 %-31.12.2023
0.7705ex 2921 49 00304-Isopropylaniline (CAS RN 99-88-7)0 %-31.12.2024
0.7592ex 2921 49 00352-Ethylaniline (CAS RN 578-54-1)0 %-31.12.2023
0.2609ex 2921 49 0040N-1-Naphthylaniline (CAS RN 90-30-2)0 %-31.12.2023
0.8019ex 2921 49 00452-(4-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 897671-69-1) with a purity by weight of 95 % or more0 %-31.12.2025
0.8020ex 2921 49 00552-(2-Biphenylyl)amino-9,9-dimethylfluoren (CAS RN 1198395-24-2) with a purity by weight of 95 % or more0 %-31.12.2025
0.6825ex 2921 49 00602,6-Diisopropylaniline (CAS RN 24544-04-5)0 %-31.12.2025
0.8059ex 2921 49 0065Bis-(9,9-dimethylfluoren-2-yl)amine (CAS RN 500717-23-7) with a purity by weight of 95 % or more0 %-31.12.2025
0.3981ex 2921 51 19302-Methyl-p-phenylenediamine sulphate (CAS RN 615-50-9)0 %-31.12.2023
0.4184ex 2921 51 1940p-Phenylenediamine (CAS RN 106-50-3)0 %-31.12.2026
0.4498ex 2921 51 1950Mono- and dichloroderivatives of p-phenylenediamine and p-diaminotoluene0 %-31.12.2024
0.5995ex 2921 51 19602,4-Diaminobenzenesulphonic acid (CAS RN 88-63-1)0 %-31.12.2024
0.7894ex 2921 51 9010N-(4-Chlorophenyl)benzene-1,2-diamine (CAS RN 68817-71-0) with a purity by weight of 97 % or more0 %-31.12.2024
0.2612ex 2921 59 9010Mixture of isomers of 3,5-diethyltoluenediamine (CAS RN 68479-98-1, CAS RN 75389-89-8)0 %-31.12.2023
0.3785ex 2921 59 90303,3'-Dichlorobenzidine dihydrochloride (CAS RN 612-83-9)0 %-31.12.2027
0.3870ex 2921 59 90404,4'-Diaminostilbene-2,2'-disulphonic acid (CAS RN 81-11-8)0 %-31.12.2023
0.7860ex 2922 19 0015Aqueous solution, containing by weight:

—73 % or more 2-amino-2-methyl-1-propanol (CAS RN 124-68-5),

—4,5 % or more, but not more than 27 % water (CAS RN 7732-18-5)
0 %-31.12.2024
0.5757ex 2922 19 00202-(2-Methoxyphenoxy)ethylamine hydrochloride (CAS RN 64464-07-9)0 %-31.12.2027
0.7946ex 2922 19 0029N-Methyl-N-(2-hydroxyethyl)-p-toluidine (CAS RN 2842-44-6) with a purity by weight of 99 % or more0 %-31.12.2025
0.3617ex 2922 19 0030N,N,N’,N’-Tetramethyl-2,2’-oxybis(ethylamine) (CAS RN 3033-62-3)0 %-31.12.2023
0.8337ex 2922 19 00332-Methoxyethan-1-amine (CAS RN 109-85-3) with a purity by weight of 98 % or more0 %-31.12.2027
0.6947ex 2922 19 00352-[2-(Dimethylamino)ethoxy] ethanol (CAS RN 1704-62-7)0 %-31.12.2025
0.7179ex 2922 19 0040(R)-1-((4-Amino-2-bromo-5-fluorophenyl)amino)-3-(benzyloxy)propan-2-ol 4-methylbenzenesulphonate (CAS RN 1294504-64-5)0 %-31.12.2026
0.7480ex 2922 19 00452-Methoxymethyl-p-phenylenediamine (CAS RN 337906-36-2)0 %-31.12.2023
0.3616ex 2922 19 00532-(2-Methoxyphenoxy)ethanamine (CAS RN 1836-62-0) with a purity by weight of 98 % or more0 %-31.12.2024
0.7587ex 2922 19 00553-Aminoadamantan-1-ol (CAS RN 702-82-9)0 %-31.12.2023
0.3871ex 2922 19 0060N,N,N’-Trimethyl-N’-(2-hydroxy-ethyl) 2,2’-oxybis(ethylamine), (CAS RN 83016-70-0)0 %-31.12.2023
0.5905ex 2922 19 0065trans-4-Aminocyclohexanol (CAS RN 27489-62-9)0 %-31.12.2023
0.7935ex 2922 19 00702-Benzylaminoethanol (CAS 104-63-2) with a purity by weight of 98 % or more0 %-31.12.2025
0.5986ex 2922 19 00752-Ethoxyethylamine (CAS RN 110-76-9)0 %-31.12.2023
0.4665ex 2922 19 0080N-[2-[2-(Dimethylamino)ethoxy]ethyl]-N-methyl-1,3-propanediamine (CAS RN 189253-72-3)0 %-31.12.2024
0.5911ex 2922 19 0085(1S,4R)-cis-4-Amino-2-cyclopentene-1-methanol-D-tartrate (CAS RN 229177-52-0)0 %-31.12.2023
0.5996ex 2922 21 00102-Amino-5-hydroxynaphthalene-1,7-disulphonic acid (CAS RN 6535-70-2)0 %-31.12.2024
0.2703ex 2922 21 00306-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 90-51-7)0 %-31.12.2024
0.2704ex 2922 21 00407-Amino-4-hydroxynaphthalene-2-sulphonic acid (CAS RN 87-02-5)0 %-31.12.2023
0.3873ex 2922 21 0050Sodium hydrogen 4-amino-5-hydroxynaphthalene-2,7-disulphonate (CAS RN 5460-09-3)0 %-31.12.2024
0.5997ex 2922 21 00604-Amino-5-hydroxynaphthalene-2,7-disulphonic acid with a purity by weight of 80 % or more (CAS RN 90-20-0)0 %-31.12.2023
0.2702ex 2922 29 00203-Aminophenol (CAS RN 591-27-5)0 %-31.12.2023
0.3982ex 2922 29 00255-Amino-o-cresol (CAS RN 2835-95-2)0 %-31.12.2023
0.6624ex 2922 29 00301,2-Bis(2-aminophenoxy)ethane (CAS RN 52411-34-4)0 %-31.12.2025
0.7642ex 2922 29 0033o-Phenetidine (CAS RN 94-70-2)0 %-31.12.2023
0.2936ex 2922 29 0045Anisidines0 %-31.12.2023
0.6634ex 2922 29 0063Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more0 %-31.12.2025
0.4627ex 2922 29 00654-Trifluoromethoxyaniline (CAS RN 461-82-5)0 %-31.12.2024
0.7481ex 2922 29 00674-Chloro-2,5-dimethoxyaniline (CAS RN 6358-64-1)0 %-31.12.2023
0.2692ex 2922 29 00704-Nitro-o-anisidine (CAS RN 97-52-9)0 %-31.12.2023
0.7026ex 2922 29 0073Tris(4-aminophenyl) thiophosphate (CAS RN 52664-35-4)0 %-31.12.2026
0.4956ex 2922 29 00754-(2-Aminoethyl)phenol (CAS RN 51-67-2)0 %-31.12.2025
0.2696ex 2922 29 00803-Diethylaminophenol (CAS RN 91-68-9)0 %-31.12.2023
0.5898ex 2922 29 00854-Benzyloxyaniline hydrochloride (CAS RN 51388-20-6)0 %-31.12.2023
0.2690ex 2922 39 00101-Amino-4-bromo-9,10-dioxoanthracene-2-sulphonic acid and its salts0 %-31.12.2023
0.4914ex 2922 39 00202-Amino-5-chlorobenzophenone (CAS RN 719-59-5)0 %-31.12.2025
0.7713ex 2922 39 0030(2-Fluorophenyl)-[2-(methylamino)-5-nitrophenyl]methanone (CAS RN 735-06-8)0 %-31.12.2024
0.6761ex 2922 39 00355-Chloro-2-(methylamino)benzophenone (CAS RN 1022-13-5)0 %-31.12.2025
0.7800ex 2922 39 00404,4'-Bis(diethylamino)benzophenone (CAS RN 90-93-7)0 %-31.12.2024
0.7371ex 2922 39 00452-Amino-3,5-dibromobenzaldehyde (CAS RN 50910-55-9) with a purity by weight of 98 % or more0 %-31.12.2024
0.3546ex 2922 43 0010Anthranilic acid (CAS RN 118-92-3)0 %-31.12.2023
0.3547ex 2922 49 8510Ornithine aspartate (INNM) (CAS RN 3230-94-2)0 %-31.12.2023
0.7853ex 2922 49 8513Benzyl glycinate—4-methylbenzene-1-sulfonic acid (1/1) (CAS RN 1738-76-7) with a purity by weight of 93 % or more0 %-31.12.2024
0.5037ex 2922 49 8517Glycine (CAS RN 56-40-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of anti-caking agent silicon dioxide (CAS RN 112926-00-8)0 %-31.12.2025
0.5619ex 2922 49 85203-Amino-4-chlorobenzoic acid (CAS RN 2840-28-0)0 %-31.12.2027
0.8162ex 2922 49 85232-Ethylhexyl 4-aminobenzoate (CAS RN 26218-04-2) with a purity by weight of 99 % or more0 %-31.12.2026
0.6340ex 2922 49 8525Dimethyl 2-aminobenzene-1,4-dicarboxylate (CAS RN 5372-81-6)0 %-31.12.2024
0.8234ex 2922 49 85334-Amino-2-chlorobenzoic acid (CAS RN 2457-76-3) with a purity by weight of 98 % or more0 %-31.12.2026
0.3544ex 2922 49 8540Norvaline0 %-31.12.2023
0.8236ex 2922 49 8543(E)-Ethyl 4-(dimethylamino)but-2-enoate maleate (CAS RN 1690340-79-4) with a purity by weight of 98 % or more0 %-31.12.2026
0.3983ex 2922 49 8550D-(-)-Dihydrophenylglycine (CAS RN 26774-88-9)0 %-31.12.2024
0.8340ex 2922 49 8553(S)-ethyl 3-amino-3-phenylpropanoate hemi((2R,3R)-2,3-dihydroxysuccinate) with a purity by weight of 98 % or more0 %-31.12.2027
0.4239ex 2922 49 8560Ethyl-4-dimethylaminobenzoate (CAS RN 10287-53-3)0 %-31.12.2027
0.6650ex 2922 49 8565Diethyl aminomalonate hydrochloride (CASRN 13433-00-6)0 %-31.12.2025
0.4426ex 2922 49 85702-Ethylhexyl-4-dimethylaminobenzoate (CAS RN 21245-02-3)0 %-31.12.2023
0.7254ex 2922 49 8575L-alanine isopropyl ester hydrochloride (CAS RN 62062-65-1)0 %-31.12.2024
0.6100ex 2922 49 858012-Aminododecanoic acid (CAS RN 693-57-2)0 %-31.12.2023
0.7020ex 2922 50 00102-(2-(2-Aminoethoxy)ethoxy)acetic acid hydrochloride (CAS RN 134979-01-4)0 %-31.12.2026
0.7257ex 2922 50 00153,5-Diiodothyronine (CAS RN 1041-01-6)0 %-31.12.2027
0.4702ex 2922 50 00201-[2-Amino-1-(4-methoxyphenyl)-ethyl]-cyclohexanol hydrochloride (CAS RN 130198-05-9)0 %-31.12.2024
0.8445ex 2922 50 0025L-Threonine (CAS RN 72-19-5)0 %-31.12.2027
0.7523ex 2922 50 0035(2S)-2-Amino-3-(3,4-dimethoxyphenyl)-2-methylpropanoic acid hydrochloride (CAS RN 5486-79-3)0 %-31.12.2023
0.8364ex 2922 50 00551-{[4-(Benzyloxy)phenyl]-2-(dimethylamino)ethyl}cyclohexanol (CAS RN 93413-61-7) with a purity by weight of 98 % or more0 %-31.12.2027
0.8325ex 2922 50 0065[4-[2-(Dimethylamino)ethoxy]phenyl](4-hydroxyphenyl)methanone (CAS RN 173163-13-8) with a purity by weight of 98 % or more0 %-31.12.2027
0.2681ex 2922 50 00702-(1-Hydroxycyclohexyl)-2-(4-methoxyphenyl)ethylammonium acetate0 %-31.12.2023
0.6226ex 2923 10 0010Calcium phosphoryl choline chloride tetrahydrate (CAS RN 72556-74-2)0 %-31.12.2024
0.3543ex 2923 90 0010Tetramethylammonium hydroxide, in the form of an aqueous solution containing 25 % (± 0,5 %) by weight of tetramethylammonium hydroxide0 %-31.12.2023
0.4499ex 2923 90 0025Tetrakis(dimethylditetradecylammonium) molybdate (CAS RN 117342-25-3)0 %-31.12.2023
0.8159ex 2923 90 0030Tetrabutylammonium tetrahydroborate (CAS RN 33725-74-5) with a purity by weight of 97 % or more0 %-31.12.2026
0.7879ex 2923 90 0050Betaine hydrochloride (CAS RN 590-46-5), with a purity by weight of 93 % or more0 %-31.12.2024
0.7089ex 2923 90 0055Tetrabutylammonium bromide (CAS RN 1643-19-2)0 %-31.12.2026
0.7615ex 2923 90 0065N,N,N-Trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide (CAS RN 53075-09-5) in form of an aqueous solution with a content of N,N,N-trimethyl-tricyclo[3.3.1.13,7]decan-1-aminium hydroxide by weight of 17,5 % or more but not more than 27,5 %0 %-31.12.2023
0.3538ex 2923 90 0070Tetrapropylammonium hydroxide, in the form of an aqueous solution containing:

—40 % (± 2 %) by weight of tetrapropylammonium hydroxide,

—0,3 % by weight or less of carbonate,

—0,1 % by weight or less of tripropylamine,

—500 mg/kg or less of bromide and

—25 mg/kg or less of potassium and sodium taken together
0 %-31.12.2023
0.5063ex 2923 90 0075Tetraethylammonium hydroxide, in the form of an aqueous solution containing:

—35 % (± 0,5 %) by weight of tetraethylammonium hydroxide,

—not more than 1 000  mg/kg of chloride,

—not more than 2 mg/kg of iron, and

—not more than 10 mg/kg of potassium
0 %-31.12.2025
0.3536ex 2923 90 0080Diallyldimethylammonium chloride (CAS RN 7398-69-8), in the form of an aqueous solution containing by weight 63 % or more but not more than 67 % of diallyldimethylammonium chloride0 %-31.12.2023
0.6410ex 2923 90 0085N,N,N-Trimethylanilinium chloride (CAS RN 138-24-9)0 %-31.12.2024
0.2678ex 2924 19 00102-Acrylamido-2-methylpropanesulphonic acid (CAS RN 15214-89-8) or its sodium salt (CAS RN 5165-97-9), or its ammonium salt (CAS RN 58374-69-9)0 %-31.12.2023
0.6227ex 2924 19 0015N-Ethyl N-methylcarbamoyl chloride (CAS RN 42252-34-6)0 %-31.12.2024
0.8000ex 2924 19 00182-(((Butylamino)carbonyl)oxy)ethyl acrylate (CAS RN 63225-53-6) with a purity by weight of 97 % or more0 %-31.12.2025
0.8027ex 2924 19 0028(2S)-2-Amino-5-(carbamoylamino)pentanoic acid ; 2-hydroxybutanedioic acid (2:1) (CAS RN 54940-97-5) with a purity by weight of 98 % or more0 %-31.12.2025
0.3535ex 2924 19 0030Methyl 2-acetamido-3-chloropropionate (CAS RN 87333-22-0)0 %-31.12.2023
0.8030ex 2924 19 0033(2S)-2-Amino-5-(carbamoylamino)pentanoic acid ; 2-hydroxybutanedioic acid (1:1) (CAS RN 70796-17-7) with a purity by weight of 98,5 % or more0 %-31.12.2025
0.6549ex 2924 19 0035Acetamide (CAS RN 60-35-5)0 %-31.12.2024
0.8041ex 2924 19 0038Diethyl acetamidomalonate (CAS RN 1068-90-2) with a purity by weight of 98 % or more0 %-31.12.2025
0.8049ex 2924 19 0043N6-(tert-Butoxycarbonyl)-L-lysine methyl ester hydrochloride (CAS RN 2389-48-2) with a purity by weight of 98 % or more0 %-31.12.2025
0.8283ex 2924 19 0048N,N-Dimethylcarbamoyl chloride (CAS RN 79-44-7) with a purity by weight of 99 % or more0 %-31.12.2026
0.8429ex 2924 19 0053Aqueous solution of propamocarb hydrochloride (ISOM)(CAS RN 25606-41-1), containing by weight 64 % or more, but not more than 68 % of propamocarb hydrochloride0 %-31.12.2027
0.7060ex 2924 19 00552-Propynyl butylcarbamate (CAS RN 76114-73-3)0 %-31.12.2026
0.4160ex 2924 19 0060N,N-Dimethylacrylamide (CAS RN 2680-03-7)0 %-31.12.2026
0.7482ex 2924 19 00652,2,2-Trifluoroacetamide (CAS RN 354-38-1)0 %-31.12.2023
0.4380ex 2924 19 0070Methylcarbamate (CAS RN 598-55-0)0 %-31.12.2023
0.7575ex 2924 19 0075(S)-4-((tert-Butoxycarbonyl)amino)-2-hydroxybutanoic acid (CAS RN 207305-60-0)0 %-31.12.2023
0.5605ex 2924 19 0080Tetrabutylurea (CAS RN 4559-86-8)0 %-31.12.2027
0.2939ex 2924 21 00104,4’-Dihydroxy-7,7’-ureylenedi(naphthalene-2-sulfonic acid) and its sodium salts0 %-31.12.2023
0.5998ex 2924 21 0020(3-Aminophenyl)urea hydrochloride (CAS RN 59690-88-9)0 %-31.12.2024
0.35332924 25 00Alachlor (ISO), (CAS RN 15972-60-8)0 %-31.12.2023
0.6047ex 2924 29 70124-(Acetylamino)-2-aminobenzenesulphonic acid (CAS RN 88-64-2)0 %-31.12.2024
0.3534ex 2924 29 7015Acetochlor (ISO), (CAS RN 34256-82-1)0 %-31.12.2023
0.6266ex 2924 29 70172-(Trifluoromethyl)benzamide (CAS RN 360-64-5)0 %-31.12.2024
0.6363ex 2924 29 70192-[[2-(Benzyloxycarbonylamino)acetyl]amino]propionic acid (CAS RN 3079-63-8)0 %-31.12.2024
0.4685ex 2924 29 70202-Chloro-N-(2-ethyl-6-methylphenyl)-N-(propan-2-yloxymethyl)acetamide (CAS RN 86763-47-5)0 %-31.12.2024
0.6568ex 2924 29 7023Benalaxyl-M (ISO) (CAS RN 98243-83-5)0 %-31.12.2024
0.8153ex 2924 29 70252-[2-(Methoxycarbonyl-phenyl-amino)-phenyl]-acetic acid (CAS RN 353497-35-5) with a purity by weight of 98 % or more0 %-31.12.2026
0.7118ex 2924 29 7030Sodium 4-(4-methyl-3-nitrobenzoylamino)benzenesulphonate (CAS RN 84029-45-8)0 %-31.12.2026
0.8235ex 2924 29 7032N-(4-Amino-2-ethoxyphenyl)acetamide (CAS RN 848655-78-7) with a purity by weight of 98 % or more0 %-31.12.2026
0.8161ex 2924 29 7035N-(1,1-Dimethylethyl)-4-amino-benzamide (CAS RN 93483-71-7) with a purity by weight of 99 % or more0 %-31.12.2026
0.8258ex 2924 29 7036N,N'-(2-Chloro-5-methyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 41131-65-1) with a purity by weight of 97 % or more0 %-31.12.2026
0.6110ex 2924 29 7037Beflubutamid (ISO) (CAS RN 113614-08-7)0 %-31.12.2023
0.5066ex 2924 29 7040N,N’-1,4-Phenylenebis[3-oxobutyramide], (CAS RN 24731-73-5)0 %-31.12.2025
0.5127ex 2924 29 7045Propoxur (ISO) (CAS RN 114-26-1)0 %-31.12.2025
0.8183ex 2924 29 7046S-Metolachlor (ISO) (CAS RN 87392-12-9) with a purity by weight of 98 % or more0 %-31.12.2026
0.7841ex 2924 29 7047(S)-tert-Butyl (1-amino-3-(4-iodophenyl)-1-oxopropan-2-yl)carbamate (CAS RN 868694-44-4) with a purity by weight of 95 % or more0 %-31.12.2024
0.8381ex 2924 29 7048(3R)-N-(tert-butoxycarbonyl)-3-amino-4-(2,4,5-trifluorophenyl)butanoic acid (CAS RN 486460-00-8) with a purity by weight of 97 % or more0 %-31.12.2027
0.8346ex 2924 29 7049tert-Butyl [(1R,2S,5S)-2-amino-5-(dimethylcarbamoyl)cyclohexyl]carbamate ethanedioate (CAS RN 1210348-34-7) with a purity by weight of 95 % or more0 %-31.12.2027
0.8184ex 2924 29 7052Zoxamide (ISO) (CAS RN 156052-68-5) with a purity by weight of 97 % or more0 %-31.12.2026
0.5622ex 2924 29 70534-Amino-N-[4-(aminocarbonyl)phenyl]benzamide (CAS RN 74441-06-8)0 %-31.12.2027
0.8362ex 2924 29 70542-[4-(Benzyloxy)phenyl]-N,N-dimethylacetamide (CAS RN 919475-15-3) with a purity by weight of 98 % or more0 %-31.12.2027
0.5069ex 2924 29 7055N,N’-(2,5-Dimethyl-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 24304-50-5)0 %-31.12.2025
0.8315ex 2924 29 7056Valifenalate (ISO) (CAS RN 283159-90-0) with a purity by weight of 98 % or more0 %-31.12.2027
0.8043ex 2924 29 70582-Chloro-N-[1-(4-chloro-3-fluorophenyl)-2-methylpropan-2-yl]acetamide (CAS RN 787585-35-7) with a purity by weight of 98 % or more0 %-31.12.2025
0.6767ex 2924 29 70622-Chlorobenzamide (CAS RN 609-66-5)0 %-31.12.2025
0.6766ex 2924 29 7064N-(3',4'-dichloro-5-fluoro[1,1’-biphenyl]-2-yl)acetamide (CAS RN 877179-03-8)0 %-31.12.2025
0.7632ex 2924 29 7067N,N'-(2,5-Dichloro-1,4-phenylene)bis[3-oxobutyramide] (CAS RN 42487-09-2)0 %-31.12.2023
0.7582ex 2924 29 7070N-[(benzyloxy)carbonyl]glycyl-N-[(2S)-1-{4-[(tert-butoxycarbonyl)oxy]phenyl}-3-hydroxypropan-2-yl]-L-alaninamide0 %-31.12.2023
0.6480ex 2924 29 7073Napropamide (ISO) (CAS RN 15299-99-7)0 %-31.12.2024
0.2672ex 2924 29 70753-Amino-p-anisanilide (CAS RN 120-35-4)0 %-31.12.2023
0.8060ex 2924 29 70785-Amino-3-(4-chlorophenyl)-5-oxopentanoic acid (CAS RN 1141-23-7) with a purity by weight of 98 % or more0 %-31.12.2025
0.2673ex 2924 29 7085p-Aminobenzamide (CAS RN 2835-68-9)0 %-31.12.2023
0.4495ex 2924 29 70885’-Chloro-3-hydroxy-2’-methyl-2-naphthanilide (CAS RN 135-63-7)0 %-31.12.2023
0.4493ex 2924 29 7089Flutolanil (ISO) (CAS RN 66332-96-5)0 %-31.12.2023
0.3690ex 2924 29 70913-Hydroxy-2’-methoxy-2-naphthanilide (CAS RN 135-62-6)0 %-31.12.2023
0.3691ex 2924 29 70923-Hydroxy-2-naphthanilide (CAS RN 92-77-3)0 %-31.12.2024
0.3692ex 2924 29 70933-Hydroxy-2'-methyl-2-naphthanilide (CAS RN 135-61-5)0 %-31.12.2023
0.3693ex 2924 29 70942’-Ethoxy-3-hydroxy-2-naphthanilide (CAS RN 92-74-0)0 %-31.12.2023
0.3863ex 2924 29 70971,1-Cyclohexanediacetic acid monoamide (CAS RN 99189-60-3)0 %-31.12.2023
0.3526ex 2925 11 0020Saccharin and its sodium salt0 %-31.12.2023
0.2674ex 2925 19 9510N-Phenylmaleimide (CAS RN 941-69-5)0 %-31.12.2023
0.5612ex 2925 19 95204,5,6,7-Tetrahydroisoindole-1,3-dione (CAS RN 4720-86-9)0 %-31.12.2027
0.5740ex 2925 19 9530N,N'-(m-Phenylene)dimaleimide (CAS RN 3006-93-7)0 %-31.12.2027
0.8013ex 2925 19 9540N-Iodosuccinimide (CAS RN 516-12-1) with a purity by weight of 98,5 % or more0 %-31.12.2025
0.2934ex 2925 29 0010Dicyclohexylcarbodiimide (CAS RN 538-75-0)0 %-31.12.2023
0.5891ex 2925 29 0020N-[3-(Dimethylamino)propyl]-N'-ethylcarbodiimide hydrochloride (CAS RN 25952-53-8)0 %-31.12.2023
0.8339ex 2925 29 00251-(3-(2-Hydroxyethyl)phenyl)guanidinium methanesulfonate (CAS RN 2101429-50-7) with a purity by weight of 99 % or more0 %-31.12.2027
0.7749ex 2925 29 0040N-Amidinosarcosine (CAS RN 57-00-1)0 %-31.12.2024
0.7832ex 2925 29 0050(Chloromethylene)dimethyliminium chloride (CAS RN 3724-43-4) with a purity by weight of 95 % or more0 %-31.12.2024
0.8033ex 2925 29 0060Formamidine acetate (CAS RN 3473-63-0) with a purity by weight of 99 % or more0 %-31.12.2025
0.8040ex 2925 29 0070Bromomethylidene(dimethyl)azanium bromide (CAS RN 24774-61-6) with a purity by weight of 97 % or more0 %-31.12.2025
0.6258ex 2926 90 70164-Cyano-2-nitrobenzoic acid methyl ester (CAS RN 52449-76-0)0 %-31.12.2024
0.6934ex 2926 90 7017Cypermethrin (ISO) with its stereoisomers (CAS RN 52315-07-8) with a purity by weight of 90 % or more0 %-31.12.2025
0.7408ex 2926 90 7018Flumethrin (ISO) (CAS RN 69770-45-2)0 %-31.12.2027
0.7466ex 2926 90 70192-(4-Amino-2-chloro-5-methylphenyl)-2-(4-chlorophenyl) acetonitrile (CAS RN 61437-85-2)0 %-31.12.2023
0.2668ex 2926 90 70202-(m-Benzoylphenyl)propiononitrile (CAS RN 42872-30-0)0 %-31.12.2024
0.7458ex 2926 90 70214-Bromo-2-chlorobenzonitrile (CAS RN 154607-01-9)0 %-31.12.2023
0.7514ex 2926 90 7022Acetonitrile (CAS RN 75-05-8)0 %-31.12.2023
0.6109ex 2926 90 7023Acrinathrin (ISO) (CAS RN 101007-06-1)0 %-31.12.2023
0.7805ex 2926 90 70242-Hydroxy-2-methylpropiononitrile (CAS RN 75-86-5) with a purity by weight of 99 % or more0 %-31.12.2024
0.5227ex 2926 90 70252,2-Dibromo-3-nitrilopropionamide (CAS RN 10222-01-2)0 %-31.12.2026
0.6259ex 2926 90 7026Cyfluthrin (ISO) (CAS RN 68359-37-5) with a purity by weight of 95,5 % or more for the use in the manufacture of biocidal products (1)0 %-31.12.2024
0.6149ex 2926 90 7027Cyhalofop-butyl (ISO) (CAS RN 122008-85-9)0 %-31.12.2023
0.8321ex 2926 90 70283-Bromo-6-chloro-2-fluorobenzonitrile (CAS RN 943830-79-3) with a purity by weight of 98 % or more0 %-31.12.2027
0.7430ex 2926 90 70292-Cyclohexylidene-2-phenylacetonitrile (CAS RN 10461-98-0) with a purity by weight of 95 % or more0 %-31.12.2027
0.7201ex 2926 90 70304,5-Dichloro-3,6-dioxocyclohexa-1,4-diene-1,2-dicarbonitrile (CAS RN 84-58-2)0 %-31.12.2026
0.7406ex 2926 90 7033Deltamethrin (ISO) (CAS RN 52918-63-5)0 %-31.12.2027
0.7034ex 2926 90 70354-Cyano-2-methoxybenzaldehyde (CAS RN 21962-45-8)0 %-31.12.2026
0.6970ex 2926 90 70402-(4-Cyanophenylamino)acetic acid (CAS RN 42288-26-6)0 %-31.12.2023
0.3522ex 2926 90 7050Alkyl or alkoxyalkyl esters of cyanoacetic acid0 %-31.12.2023
0.8217ex 2926 90 7056Methyl 2-cyano-2-propylpentanoate (CAS RN 66546-92-7) with a purity by weight of 97 % or more0 %-31.12.2026
0.4182ex 2926 90 7061m-(1-Cyanoethyl)benzoic acid (CAS RN 5537-71-3)0 %-31.12.2026
0.4644ex 2926 90 7064Esfenvalerate (CAS RN 66230-04-4) of a purity by weight of 83 % or more in a mixture of its own isomers0 %-31.12.2024
0.4802ex 2926 90 7070Methacrylonitrile (CAS RN 126-98-7)0 %-31.12.2024
0.2543ex 2926 90 7074Chlorothalonil (ISO) (CAS RN 1897-45-6)0 %-31.12.2024
0.3521ex 2926 90 7075Ethyl 2-cyano-2-ethyl-3-methylhexanoate (CAS RN 100453-11-0)0 %-31.12.2024
0.3516ex 2926 90 7080Ethyl 2-cyano-2-phenylbutyrate (CAS RN 718-71-8)0 %-31.12.2023
0.3514ex 2926 90 7086Ethylenediaminetetraacetonitrile (CAS RN 5766-67-6)0 %-31.12.2023
0.3515ex 2926 90 7089Butyronitrile (CAS RN 109-74-0)0 %-31.12.2023
0.2667ex 2927 00 00102,2'-Dimethyl-2,2'-azodipropionamidine dihydrochloride0 %-31.12.2023
0.2665ex 2927 00 00204-Anilino-2-methoxybenzenediazonium hydrogen sulphate (CAS RN 36305-05-2)0 %-31.12.2023
0.7337ex 2927 00 00252,2’-Azobis(4-methoxy-2,4-dimethylvaleronitrile) (CAS RN 15545-97-8)0 %-31.12.2027
0.2810ex 2927 00 00304’-Aminoazobenzene-4-sulphonic acid (CAS RN 104-23-4)0 %-31.12.2023
0.6306ex 2927 00 0035C.C’-Azodi(formamide) (CAS RN 123-77-3) in the form of yellow powder with a decomposition temperature of 180 °C or more but not more than 220 °C used as a foaming agent in the manufacture of thermoplastic resins, elastomer and cross-linked polythene foam0 %-31.12.2024
0.3984ex 2927 00 00604,4’-Dicyano-4,4’-azodivaleric acid (CAS RN 2638-94-0)0 %-31.12.2023
0.2661ex 2928 00 90103,3’-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N’-bipropionamide (CAS RN 32687-78-8)0 %-31.12.2023
0.6479ex 2928 00 9013Cymoxanil (ISO) (CAS RN 57966-95-7)0 %-31.12.2024
0.6548ex 2928 00 9018Acetone oxime (CAS RN 127-06-0) of a purity by weight of 99 % or more0 %-31.12.2024
0.6871ex 2928 00 9023Metobromuron (ISO) (CAS RN 3060-89-7) with a purity by weight of 98 % or more0 %-31.12.2025
0.4929ex 2928 00 9025Acetaldehyde oxime (CAS RN 107-29-9) in an aqueous solution0 %-31.12.2025
0.6985ex 2928 00 9028Pentan-2-one oxime (CAS RN 623-40-5)0 %-31.12.2026
0.5438ex 2928 00 9030N-Isopropylhydroxylamine (CAS RN 5080-22-8)0 %-31.12.2026
0.7448ex 2928 00 90334- Chlorophenylhydrazine Hydrochloride (CAS RN 1073-70-7)0 %-31.12.2023
0.8061ex 2928 00 9038Aqueous solution of methoxyammonium chloride (CAS-RN 593-56-6), containing by weight:

—30 % or more but not more than 40 % of methoxyammonium chloride

—not more than 4 % of hydrochloric acid
0 %-31.12.2025
0.2659ex 2928 00 9040O-Ethylhydroxylamine, in the form of an aqueous solution (CAS RN 624-86-2)0 %-31.12.2023
0.8093ex 2928 00 90432-(3-Methoxy-3-oxopropyl)-1,1,1-trimethylhydrazinium bromide (CAS RN 106966-25-0) with a purity by weight of 99 % or more0 %-31.12.2025
0.5919ex 2928 00 9045Tebufenozide (ISO) (CAS RN 112410-23-8)0 %-31.12.2023
0.8158ex 2928 00 90481-{[(1H-Fluoren-9-ylmetoxi)carbonil]oxi}pyrrolidine-2,5-dione (CAS RN 82911-69-1) with a purity by weight of 98 % or more0 %-31.12.2026
0.6635ex 2928 00 9050Aqueous solution of 2,2’-(hydroxyimino) bisethanesulphonic acid disodium salt (CAS RN 133986-51-3) with a content by weight of more than 33,5 % but not more than 36,5 %0 %-31.12.2025
0.5918ex 2928 00 9055Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1)0 %-31.12.2023
0.6364ex 2928 00 90652-Amino-3-(4-hydroxyphenyl) propanal semicarbazone hydrochloride0 %-31.12.2024
0.4544ex 2928 00 9070Butanone oxime (CAS RN 96-29-7)0 %-31.12.2023
0.5228ex 2928 00 9075Metaflumizone (ISO) (CAS RN 139968-49-3)0 %-31.12.2026
0.3510ex 2928 00 9080Cyflufenamid (ISO) (CAS RN 180409-60-3)0 %-31.12.2023
0.4714ex 2929 10 00153,3’-Dimethylbiphenyl-4,4’-diyl diisocyanate (CAS RN 91-97-4)0 %-31.12.2024
0.5827ex 2929 10 0020Butyl isocyanate (CAS RN 111-36-4)0 %-31.12.2027
0.4188ex 2929 10 00351,3-Bis(isocyanatomethyl)benzene (CAS RN 3634-83-1) with a purity by weight of 99 % or more0 %-31.12.2024
0.2660ex 2929 10 0040m-Isopropenyl-α,α-dimethylbenzyl isocyanate (CAS RN 2094-99-7)0 %-31.12.2023
0.5033ex 2929 10 00452,5 (and 2,6)-Bis(isocyanatomethyl)bicyclo[2.2.1]heptane (CAS RN 74091-64-8) with a purity by weight of 99 % or more0 %-31.12.2024
0.2657ex 2929 10 0050m-Phenylenediisopropylidene diisocyanate (CAS RN 2778-42-9)0 %-31.12.2023
0.3509ex 2929 10 0060Trimethylhexamethylene diisocyanate, mixed isomers0 %-31.12.2023
0.8171ex 2929 90 0040N-Butylphosphorothioic triamide (CAS RN 94317-64-3) with a purity by weight of 97 % or more0 %-31.12.2026
0.8172ex 2929 90 0050N-Propylphosphorothioic triamide (CAS RN 916809-14-8) with a purity by weight of 97 % or more0 %-31.12.2026
0.4298ex 2930 20 0040Prosulfocarb (ISO) (CAS RN 52888-80-9) with purity by weight of 97 % or more0 %-31.12.2027
0.5278ex 2930 20 00502-Isopropylethylthiocarbamate (CAS RN 141-98-0) with a purity by weight of 95 % or more0 %-31.12.2024
0.8036ex 2930 90 9811Benzyl (2S)-2-amino-3-[3-(methanesulphonylphenyl)]propanoate hydrochloride (CAS RN 1194550-59-8) with a purity by weight of 98 % or more0 %-31.12.2025
0.7483ex 2930 90 98124,4'-Sulfonyldiphenol (CAS RN 80-09-1) used in the manufacture of polyarylsulfones or polyarylethersulfones (1)0 %-31.12.2023
0.8047ex 2930 90 9814(E)-N'-(2-Cyano-4-(3-(1-hydroxy-2-methylpropan-2-yl)thioureido)phenyl)-N,N-dimethyl-formimidamide (CAS RN 1429755-57-6) with a purity by weight of 98 % or more0 %-31.12.2025
0.2932ex 2930 90 9815Ethoprophos (ISO) (CAS RN 13194-48-4)0 %-31.12.2023
0.6551ex 2930 90 98163-(Dimethoxymethylsilyl)-1-propanethiol (CAS RN 31001-77-1)0 %-31.12.2024
0.5999ex 2930 90 98172-(3-Aminophenylsulphonyl)ethyl hydrogen sulphate (CAS RN 2494-88-4)0 %-31.12.2024
0.7748ex 2930 90 9818Dimethyl sulfone (CAS RN 67-71-0)0 %-31.12.2024
0.8050ex 2930 90 98194-Amino-5-(ethanesulphonyl)-2-methoxybenzoic acid (CAS RN 71675-87-1) with a purity by weight of 98 % or more0 %-31.12.2025
0.7799ex 2930 90 98204-(4-Methylphenylthio)benzophenone (CAS RN 83846 85-9)0 %-31.12.2024
0.6750ex 2930 90 9821[2,2’-Thio-bis(4-tert-octylphenolato)]-n-butylamine nickel (CAS RN 14516-71-3)0 %-31.12.2026
0.6769ex 2930 90 9822Tembotrione (ISO) (CAS RN 335104-84-2) with a purity by weight of 94,5 % or more0 %-31.12.2025
0.5899ex 2930 90 9823Dimethyl [(methylsulphanyl)methylylidene]biscarbamate (CAS RN 34840-23-8)0 %-31.12.2023
0.7714ex 2930 90 9824Phenyl vinyl sulfone (CAS RN 5535-48-8)0 %-31.12.2024
0.2930ex 2930 90 9825Thiophanate-methyl (ISO), (CAS RN 23564-05-8)0 %-31.12.2023
0.6873ex 2930 90 9826Folpet (ISO)(CAS RN 133-07-3) with a purity by weight of 97,5 % or more0 %-31.12.2025
0.6585ex 2930 90 98272-[(4-Amino-3-methoxyphenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 26672-22-0)0 %-31.12.2024
0.8069ex 2930 90 9828Mesotrione (ISO) (CAS RN 104206-82-8) in form of wet cake or wet paste or in its crystalline form, with

—a purity of 74 % or more by weight and,

—a maximum water content of 23 % by weight
0 %-31.12.2025
0.7859ex 2930 90 98294-Amino-5-(ethylsulfanyl)-2-methoxybenzoic acid (CAS RN 71675-86-0) with a purity by weight of 98 % or more0 %-31.12.2024
0.2933ex 2930 90 98304-(4-Isopropoxyphenylsulphonyl)phenol (CAS RN 95235-30-6)0 %-31.12.2023
0.7833ex 2930 90 9831(p-Toluenesulphonyl)methyl isocyanide (CAS RN 36635-61-7) with a purity by weight of 98 % or more0 %-31.12.2024
0.8152ex 2930 90 98322-Methoxy-N-[2-nitro-5-(phenylsulfanyl)phenyl]acetamide (CAS RN 63470-85-9) with a purity by weight of 96 % or more0 %-31.12.2026
0.6584ex 2930 90 98332-Amino-5-{[2-(sulfooxy)ethyl]sulfonyl}benzenesulfonIc acid (CAS RN 42986-22-1)0 %-31.12.2024
0.5035ex 2930 90 98342,3-Bis((2-mercaptoethyl)thio)-1-propanethiol (CAS RN 131538-00-6) with a purity by weight of 85 % or more, but not more than 95 %0 %-31.12.2024
0.3811ex 2930 90 9835Glutathione (CAS RN 70-18-8)0 %-31.12.2026
0.7682ex 2930 90 9838Allyl isothiocyanate (CAS RN 57-06-7)0 %-31.12.2023
0.2928ex 2930 90 98403,3’-Thiodi(propionic acid) (CAS RN 111-17-1)0 %-31.12.2023
0.6167ex 2930 90 9843Trimethylsulfoxonium iodide (CAS RN 1774-47-6)0 %-31.12.2023
0.2931ex 2930 90 98452-[(p-Aminophenyl)sulphonyl]ethyl hydrogen sulphate (CAS RN 2494-89-5)0 %-31.12.2024
0.7689ex 2930 90 98503-Mercaptopropionic acid (CAS RN 107-96-0)0 %-31.12.2023
0.6617ex 2930 90 9853Bis(4-chlorophenyl) sulphone (CAS RN 80-07-9)0 %-31.12.2025
0.5114ex 2930 90 9855Thiourea (CAS RN 62-56-6)0 %-31.12.2025
0.2929ex 2930 90 9860Methyl phenyl sulphide (CAS RN 100-68-5)0 %-31.12.2023
0.4629ex 2930 90 98643-Chloro-2-methylphenyl methyl sulphide (CAS RN 82961-52-2)0 %-31.12.2024
0.4296ex 2930 90 9868Clethodim (ISO) (CAS RN 99129-21-2)0 %-31.12.2027
0.3986ex 2930 90 98774-[4-(2-Propenyloxy)phenylsulphonyl]phenol (CAS RN 97042-18-7)0 %-31.12.2023
0.4187ex 2930 90 98784-Mercaptomethyl-3,6-dithia-1,8-octanedithiol (CAS RN 131538-00-6)0 %-31.12.2026
0.2999ex 2930 90 9880Captan (ISO) (CAS RN 133-06-2)0 %-31.12.2023
0.4694ex 2930 90 9881Disodium hexamethylene-1,6-bisthiosulfate dihydrate (CAS RN 5719-73-3)3 %-31.12.2024
0.7985ex 2930 90 98881-{4-[(4-Benzoylphenyl)sulphanyl]phenyl}-2-methyl-2-[(4-methylphenyl)sulphonyl]propan-1-one (CAS RN 272460-97-6) with a purity by weight of 94 % or more0 %-31.12.2025
0.4094ex 2930 90 9889Potassium- or sodium-salt of O-ethyl-, O-isopropyl-, O-butyl-, O-isobutyl- or O-pentyl-dithiocarbonates0 %-31.12.2026
0.7070ex 2930 90 98931-Hydrazino-3-(methylthio)propan-2-ol (CAS RN 1435-97-8)0 %-31.12.2026
0.7078ex 2930 90 9895N-(Cyclohexylthio)phthalimide (CAS RN 17796-82-6)0 %-31.12.2026
0.7086ex 2930 90 9897Diphenyl sulphone (CAS RN 127-63-9)0 %-31.12.2026
0.5741ex 2931 49 9008Sodium diisobutyldithiophosphinate (CAS RN 13360-78-6) in an aqueous solution0 %-31.12.2027
0.5492ex 2931 49 9013Trioctylphosphine oxide (CAS RN 78-50-2)0 %-31.12.2026
0.6088ex 2931 49 9023Di-tert-butylphosphane (CAS RN 819-19-2)0 %-31.12.2023
0.5758ex 2931 49 9025(Z)-Prop-1-en-1-ylphosphonic acid (CAS RN 25383-06-6)0 %-31.12.2027
0.3497ex 2931 49 9030Bis(2,4,4-trimethylpentyl)phosphinic acid (CAS RN 83411-71-6)0 %-31.12.2023
0.7533ex 2931 49 9035Ethyl phenyl(2,4,6-trimethylbenzoyl)phosphinate (CAS RN 84434-11-7)0 %-31.12.2023
0.2656ex 2931 49 9038N-(Phosphonomethyl)iminodiacetic acid (CAS RN 5994-61-6) containing by weight not more than 15 % of water, and with a dry weight purity of 97 % or more0 %-31.12.2024
0.5229ex 2931 49 9040Tetrakis(hydroxymethyl)phosphonium chloride (CAS RN 124-64-1)0 %-31.12.2026
0.4433ex 2931 49 9045Diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (CAS RN 75980-60-8)0 %-31.12.2023
0.3492ex 2931 49 9048Tetrabutylphosphonium acetate in the form of an aqueous solution (CAS RN 30345-49-4)0 %-31.12.2024
0.3987ex 2931 49 90553-(Hydroxyphenylphosphinoyl)propionic acid (CAS RN 14657-64-8)0 %-31.12.2023
0.7709ex 2931 59 90502-Chloroethylphosphonic acid (CAS RN 16672-87-0) solid or in aqueous solution, with a content by weight of 2-Chloroethylphosphonic acid of 65 % or more0 %-31.12.2024
0.3504ex 2931 90 0003Butylethylmagnesium (CAS RN 62202-86-2), in the form of a solution in heptane0 %-31.12.2023
0.4515ex 2931 90 0015Methylcyclopentadienyl manganese tricarbonyl (CAS RN 12108-13-3) containing not more than 4,9 % by weight of cyclopentadienyl manganese tricarbonyl0 %-31.12.2024
0.8051ex 2931 90 0023Ixazomib citrate (INNM) (CAS RN 1239908-20-3) with a purity by weight of 95 % or more0 %-31.12.2025
0.7951ex 2931 90 0025N-(3-(Dimethoxymethylsilyl)propyl)ethylenediamine (CAS RN 3069-29-2) with a purity by weight of 98 % or more0 %-31.12.2025
0.8063ex 2931 90 0028Triethoxy(3-isocyanatopropyl)silane (CAS RN 24801-88-5) with a purity by weight of 96 % or more0 %-31.12.2025
0.8272ex 2931 90 0030Tert-Butylchlorodimethylsilane (CAS RN 18162-48-6) with a purity by weight of 99 % or more0 %-31.12.2026
0.3499ex 2931 90 0033Dimethyl[dimethylsilyldiindenyl]hafnium (CAS RN 220492-55-7)0 %-31.12.2024
0.2654ex 2931 90 0035N,N-Dimethylanilinium tetrakis(pentafluorophenyl)borate (CAS RN 118612-00-3)0 %-31.12.2024
0.8316ex 2931 90 00382-(Trimethylsilyl)ethoxymethyl chloride (CAS RN 76513-69-4) with a purity by weight of 98 % or more0 %-31.12.2027
0.8442ex 2931 90 0040Chlorotrimethylsilane (CAS RN 75-77-4) with a purity by weight of 98 % or more0 %-31.12.2027
0.4121ex 2931 90 0050Trimethylsilane (CAS RN 993-07-7)0 %-31.12.2026
0.3486ex 2932 13 0010Tetrahydrofurfuryl alcohol (CAS RN 97-99-4)0 %-31.12.2023
0.4590ex 2932 14 00101,6-Dichloro-1,6-dideoxy-β-D-fructofuranosyl-4-chloro-4-deoxy-α-D-galactopyranoside (CAS RN 56038-13-2)0 %-31.12.2024
0.3488ex 2932 19 0040Furan (CAS RN 110-00-9) of a purity by weight of 99 % or more0 %-31.12.2024
0.4514ex 2932 19 00412,2 Di(tetrahydrofuryl)propane (CAS RN 89686-69-1)0 %-31.12.2024
0.8252ex 2932 19 0055(3S)-3-[4-[(5-Bromo-2-chlorophenyl)methyl]phenoxy]tetrahydro-furan (CAS RN 915095-89-5) with a purity by weight of 97 % or more0 %-31.12.2026
0.7614ex 2932 19 0065Tefuryltrione (ISO) (CAS RN 473278-76-1)0 %-31.12.2023
0.3487ex 2932 19 0070Furfurylamine (CAS RN 617-89-0)0 %-31.12.2024
0.3611ex 2932 19 0075Tetrahydro-2-methylfuran (CAS RN 96-47-9)0 %-31.12.2023
0.5240ex 2932 19 00805-Nitrofurfurylidene di(acetate) (CAS RN 92-55-7)0 %-31.12.2026
0.2775ex 2932 20 90102'-Anilino-6'-[ethyl(isopentyl)amino]-3'-methylspiro[isobenzofuran-1(3H),9'-xanthen]-3-one (CAS RN 70516-41-5)0 %-31.12.2023
0.5257ex 2932 20 9015Coumarin (CAS RN 91-64-5)0 %-31.12.2026
0.7958ex 2932 20 90184-Hydroxycoumarin (CAS-RN 1076-38-6) with a purity by weight of 98 % or more0 %-31.12.2025
0.7984ex 2932 20 90231,4-Dioxane-2,5-dione (CAS RN 502-97-6) with a purity by weight of 99,5 % or more0 %-31.12.2025
0.5611ex 2932 20 9040(S)-(–)-α-Amino-γ-butyrolactone hydrobromide (CAS RN 15295-77-9)0 %-31.12.2027
0.6094ex 2932 20 90452,2-Dimethyl-1,3-dioxane-4,6-dione (CAS RN 2033-24-1)0 %-31.12.2023
0.7283ex 2932 20 9050L-Lactide (CAS RN 4511-42-6) or D-Lactide (CAS RN 13076-17-0) or dilactide (CAS RN 95-96-5)0 %-31.12.2027
0.7838ex 2932 20 9053(R)-4-Propyldihydrofuran-2(3H)-one (CAS RN 63095-51-2) with a purity by weight of 98 % or more0 %-31.12.2024
0.2765ex 2932 20 90556-Dimethylamino-3,3-bis(4-dimethylaminophenyl)phthalide (CAS RN 1552-42-7)0 %-31.12.2023
0.4162ex 2932 20 90606’-(Diethylamino)-3’-methyl-2’-(phenylamino)-spiro[isobenzofuran-1(3H),9’-[9H]xanthen]-3-one (CAS RN 29512-49-0)0 %-31.12.2026
0.7812ex 2932 20 9063Selamectin (INN) 5Z-isomer (CAS RN 220119-17-5)0 %-31.12.2024
0.6620ex 2932 20 9065Sodium 4-(methoxycarbonyl)-5-oxo-2,5-dihydrofuran-3-olate (CAS RN 1134960-41-0)0 %-31.12.2025
0.4161ex 2932 20 90716’-(Dibutylamino)-3’-methyl-2’-(phenylamino)-spiro[isobenzofuran-1(3H),9’-[9H]xanthen]-3-one (CAS RN 89331-94-2)0 %-31.12.2026
0.7599ex 2932 20 90753-Acetyl-6-methyl-2H-pyran-2, 4(3H)-dione (CAS RN 520-45-6)0 %-31.12.2023
0.3990ex 2932 20 9080Gibberellic acid with a minimum purity by weight of 88 % (CAS RN 77-06-5)0 %-31.12.2023
0.4403ex 2932 20 9084Decahydro-3a,6,6,9a-tetramethylnaphth [2,1-b] furan-2 (1H)-one (CAS RN 564-20-5)0 %-31.12.2023
0.3610ex 2932 99 0010Bendiocarb (ISO) (CAS RN 22781-23-3)0 %-31.12.2023
0.7202ex 2932 99 0013(4-Chloro-3-(4-ethoxybenzyl)phenyl)((3aS,5R,6S,6aS)-6-hydroxy 2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl)methanone (CAS RN 1103738-30-2)0 %-31.12.2026
0.5269ex 2932 99 00151,3,4,6,7,8-Hexahydro-4,6,6,7,8,8-hexamethylindeno[5,6-c]pyran (CAS RN 1222-05-5)0 %-31.12.2026
0.7178ex 2932 99 00184-(4-Bromo-3-((tetrahydro-2H-pyran-2-yloxy)methyl)phenoxy)benzonitrile (CAS RN 943311-78-2)0 %-31.12.2026
0.7431ex 2932 99 00232-Ethyl-3-hydroxy-4-pyrone (CAS RN 4940-11-8)0 %-31.12.2027
0.5759ex 2932 99 00251-(2,2-Difluorobenzo[d][1,3]dioxol-5-yl)cyclopropanecarboxylic acid (CAS RN 862574-88-7)0 %-31.12.2027
0.7639ex 2932 99 0027(2-Butyl-3-benzofuranyl)(4-hydroxy-3,5-diiodophenyl)methanone (CAS RN 1951-26-4) with a purity by weight of 99 % or more0 %-31.12.2023
0.8257ex 2932 99 00281,4,7,10,13-Pentaoxacyclopentadecane (CAS RN 33100-27-5) with a purity by weight of 90 % or more, the remainder mainly consisting of lineair precursors0 %-31.12.2026
0.7535ex 2932 99 00333-Hydroxy-2-methyl-4-pyrone (CAS RN 118-71-8)0 %-31.12.2023
0.8035ex 2932 99 00381-Benzofuran-6-carboxylic acid (CAS RN 77095-51-3) with a purity by weight of 98 % or more0 %-31.12.2025
0.6243ex 2932 99 0043Ethofumesate (ISO) (CAS RN 26225-79-6) with a purity by weight of 97 % or more0 %-31.12.2024
0.5915ex 2932 99 00452-Butylbenzofuran (CAS RN 4265-27-4)0 %-31.12.2024
0.7766ex 2932 99 004712H-[1]Benzofuro[3,2-c][1]benzoxepin-6-one (CAS RN 28763-77-1)0 %-31.12.2024
0.8384ex 2932 99 0048(20R,25R)-spirost-5-en-3β-ol (CAS RN 512-04-9) with a purity by weight of 95 % or more0 %-31.12.2027
0.4907ex 2932 99 00507-Methyl-3,4-dihydro-2H-1,5-benzodioxepin-3-one (CAS RN 28940-11-6)0 %-31.12.2023
0.4063ex 2932 99 00513-(3,4-Methylenedioxyphenyl)-2-methylpropanal (CAS RN 1205-17-0) with a purity by weight of 98 % or more0 %-31.12.2027
0.6113ex 2932 99 00531,3-Dihydro-1,3-dimethoxyisobenzofurane (CAS RN 24388-70-3)0 %-31.12.2023
0.6771ex 2932 99 00654,4-Dimethyl-3,5,8-trioxabicyclo[5,1,0]octane (CAS RN 57280-22-5)0 %-31.12.2025
0.7978ex 2932 99 00683,9-Diethylidene-2,4,8,10-tetraoxaspiro[5.5]undecane (CAS RN 65967-52-4) with a purity by weight of 98 % or more0 %-31.12.2025
0.7930ex 2932 99 00735-Fluoro-3-methylbenzofuran-2-carboxylic acid (CAS RN 81718-76-5) with a purity by weight of 97 % or more0 %-31.12.2025
0.7936ex 2932 99 0078Methyl 2,2-difluoro-1,3-benzodioxole-5-carboxylate (CAS RN 773873-95-3) with a purity by weight of 98 % or more0 %-31.12.2025
0.4106ex 2932 99 00801,3:2,4-bis-O-(4-Methylbenzylidene)-D-glucitol (CAS RN 81541-12-0)0 %-31.12.2023
0.7954ex 2932 99 00836,11-Dihydrodibenz[b,e]oxepin-11-one (CAS RN 4504-87-4) with a purity by weight of 98 % or more0 %-31.12.2025
0.3697ex 2932 99 00851,3:2,4-bis-O-(3,4-Dimethylbenzylidene)-D-glucitol (CAS RN 135861-56-2)0 %-31.12.2023
0.7903ex 2933 19 90133-(Difluoromethyl)-5-fluoro-1-methyl-1H-pyrazole-4-carbonyl fluoride (CAS RN 1255735-07-9) with a purity by weight of 95 % or more0 %-31.12.2024
0.6262ex 2933 19 9015Pyrasulfotole (ISO) (CAS RN 365400-11-9) with a purity by weight of 96 % or more0 %-31.12.2024
0.7835ex 2933 19 90171,3-Dimethyl-1H-pyrazole (CAS RN 694-48-4) with a purity by weight of 98 % or more0 %-31.12.2024
0.7918ex 2933 19 9023Fluindapyr (ISO) (CAS RN 1383809-87-7) with a purity by weight of 96 % or more0 %-31.12.2024
0.6261ex 2933 19 90253-Difluoromethyl-1-methyl-1H-pyrazole-4-carboxylic acid (CAS RN 176969-34-9)0 %-31.12.2024
0.7836ex 2933 19 90273-(3,3,3-Trifluoro-2,2-dimethylpropoxy)-1H-pyrazole-4-carboxylic acid (CAS RN 2229861-20-3) with a purity by weight of 95 % or more0 %-31.12.2024
0.3699ex 2933 19 90303-Methyl-1-p-tolyl-5-pyrazolone (CAS RN 86-92-0)0 %-31.12.2023
0.7811ex 2933 19 9033Fipronil (ISO) (CAS RN 120068-37-3) with a purity by weight of 95 % or more for the use in the manufacture of veterinary medicine (1)0 %-31.12.2024
0.8353ex 2933 19 90384,5-Dimethyl-1H-pyrazole-3-carboxylic acid (CAS RN 89831-40-3) with a purity by weight of 98 % or more0 %-31.12.2027
0.3877ex 2933 19 9040Edaravone (INN) (CAS RN 89-25-8)0 %-31.12.2023
0.7938ex 2933 19 9043tert-Butyl 2-(3,5-dimethyl-1H-pyrazol-4-yl)acetate (CAS RN 1082827-81-3) with a purity by weight of 95 % or more0 %-31.12.2025
0.7119ex 2933 19 90455-Amino-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-1H-pyrazole-3-carbonitrile (CAS RN 120068-79-3)0 %-31.12.2026
0.8046ex 2933 19 90481-(3-Iodo-1-isopropyl-1H-pyrazol-4-yl)ethanone (CAS RN 1269440-49-4) with a purity by weight of 98 % or more0 %-31.12.2025
0.3992ex 2933 19 9050Fenpyroximate (ISO) (CAS RN 134098-61-6)0 %-31.12.2024
0.8240ex 2933 19 90533-[2-(Dispiro[2.0.24.13]heptan-7-yl)ethoxy]-1H-pyrazole-4-carboxylic acid (CAS RN 2608048-67-3) with a purity by weight of 98 % or more0 %-31.12.2026
0.4494ex 2933 19 9060Pyraflufen-ethyl (ISO) (CAS RN 129630-19-9)0 %-31.12.2024
0.7576ex 2933 19 90654-Bromo-1-(1-ethoxyethyl)-1H-pyrazole (CAS RN 1024120-52-2)0 %-31.12.2023
0.4404ex 2933 19 90704,5-Diamino-1-(2-hydroxyethyl)-pyrazolsulphate (CAS RN 155601-30-2)0 %-31.12.2023
0.8312ex 2933 21 0045Sodium (5S,8S)-8-methoxy-2,4-dioxo-1,3-diazaspiro[4.5]decan-3-ide (CAS RN 1400584-86-2) with a purity by weight of 90 % or more0 %-31.12.2026
0.4084ex 2933 21 00501-Bromo-3-chloro-5,5-dimethylhydantoin (CAS RN 16079-88-2) / (CAS RN 32718-18-6)0 %-31.12.2026
0.6835ex 2933 21 00551-Aminohydantoin hydrochloride (CAS RN 2827-56-7)0 %-31.12.2025
0.4088ex 2933 21 0060DL-p-Hydroxyphenylhydantoin (CAS RN 2420-17-9)0 %-31.12.2026
0.5115ex 2933 21 00805,5-Dimethylhydantoin (CAS RN 77-71-4)0 %-31.12.2025
0.5972ex 2933 29 9015Ethyl 4-(1-hydroxy-1-methylethyl)-2-propylimidazole-5-carboxylate (CAS RN 144689-93-0)0 %-31.12.2023
0.7527ex 2933 29 90182-(2-Chlorophenyl)-1-[2-(2-chlorophenyl)-4,5-diphenyl-2H-imidazol-2-yl]-4,5-diphenyl-1H-imidazole (CAS RN 7189-82-4)0 %-31.12.2023
0.8150ex 2933 29 9020tert-Butyl (2S)-2-(5-bromo-1H-imidazol-2-yl)pyrrolidine-1-carboxylate (CAS RN 1007882-59-8) with a purity by weight of 98 % or more0 %-31.12.2026
0.7937ex 2933 29 90231,1'-Thiocarbonylbis(imidazole) (CAS RN 6160-65-2) with a purity by weight of 95 % or more0 %-31.12.2025
0.5920ex 2933 29 9028Prochloraz (ISO) (CAS RN 67747-09-5) with purity by weight of 97 % or more0 %-31.12.2023
0.5921ex 2933 29 9045Prochloraz copper chloride (ISO) (CAS RN 156065-03-1)0 %-31.12.2023
0.2752ex 2933 29 90501,3-Dimethylimidazolidin-2-one (CAS RN 80-73-9)0 %-31.12.2023
0.6263ex 2933 29 9055Fenamidone (ISO) (CAS RN 161326-34-7) with a purity by weight of 97 % or more0 %-31.12.2024
0.5215ex 2933 29 90601-Cyano-2-methyl-1-[2-(5-methylimidazol-4-ylmethylthio)ethyl]isothiourea (CAS RN 52378-40-2)0 %-31.12.2026
0.7120ex 2933 29 90752,2'-Azobis[2-(2-imidazolin-2-yl)propane] dihydrochloride (CAS RN 27776-21-2)0 %-31.12.2026
0.5821ex 2933 29 9080Imazalil (ISO) (CAS RN 35554-44-0)0 %-31.12.2027
0.64152933 39 50Fluroxypyr (ISO) methyl ester (CAS RN 69184-17-4)0 %-31.12.2024
0.7186ex 2933 39 99102-Aminopyridin-4-ol hydrochloride (CAS RN-1187932-09-7)0 %-31.12.2026
0.6462ex 2933 39 99112-(Chloromethyl)-4-(3-methoxypropoxy)-3-methylpyridine hydrochloride(CAS RN 153259-31-5)0 %-31.12.2024
0.5608ex 2933 39 99122,3-Dichloropyridine (CAS RN 2402-77-9)0 %-31.12.2027
0.8238ex 2933 39 9915(S)-6-Bromo-2-(4-(3-(1,3-dioxoisoindolin-2-yl)propyl)-2,2-dimethylpyrrolidin-1-yl)nicotinamide (CAS RN 2606972-45-4) with a purity by weight of 98 % or more0 %-31.12.2026
0.8239ex 2933 39 9918Perfluorophenyl 6-fluoropyridine-2-sulfonate (CAS RN 2608048-81-1) with a purity by weight of 98 % or more0 %-31.12.2026
0.6545ex 2933 39 9921Boscalid (ISO) (CAS RN 188425-85-6)0 %-31.12.2024
0.8329ex 2933 39 9922N-(5-bromo-3-methylpyridin-2-yl)-N-methylbenzamide (CAS RN 446299-80-5) with a purity by weight of 98 % or more0 %-31.12.2027
0.4594ex 2933 39 99242-Chloromethyl-4-methoxy-3,5-dimethylpyridine hydrochloride (CAS RN 86604-75-3)0 %-31.12.2024
0.3604ex 2933 39 9925Imazethapyr (ISO) (CAS RN 81335-77-5)0 %-31.12.2023
0.7091ex 2933 39 9927Pyridine-2,6-dicarboxylic acid (CAS RN 499-83-2)0 %-31.12.2026
0.6368ex 2933 39 9928Ethyl-3-[(3-amino-4-methylamino-benzoyl)-pyridin-2-yl-amino]-propionate (CAS RN 212322-56-0)0 %-31.12.2024
0.8068ex 2933 39 99304-Amino-3-(4-phenoxyphenyl)-1-[(3R)-piperidin-3-yl]-1,3-dihydro-2H-imidazo[4,5-c]pyridin-2-one (CAS RN 1971921-35-3) mono oxalate with a purity by weight of the free base of 70 % or more0 %-31.12.2025
0.6458ex 2933 39 99312-(Chloromethyl)-3-methyl-4-(2,2,2-trifluoroethoxy)pyridine hydrochloride(CAS RN 127337-60-4)0 %-31.12.2024
0.5241ex 2933 39 99322-(Chloromethyl)-3,4-dimethoxypyridine hydrochloride (CAS RN 72830-09-2)0 %-31.12.2026
0.7181ex 2933 39 99335-(3-Chlorophenyl)-3-methoxypyridine-2-carbonitrile (CAS RN 1415226-39-9)0 %-31.12.2026
0.8420ex 2933 39 9934Pyridin-3-ol (CAS RN 109-00-2) with a purity by weight of 98 % or more0 %-31.12.2027
0.3878ex 2933 39 9935Aminopyralid (ISO) (CAS RN 150114-71-9)0 %-31.12.2023
0.7296ex 2933 39 99361-[2-[5-Methyl-3-(trifluoromethyl)-1H-pyrazol-1-yl]acetyl]piperidine-4-carbothioamide (CAS RN 1003319-95-6)0 %-31.12.2027
0.5230ex 2933 39 9937Aqueous solution of pyridine-2-thiol-1-oxide, sodium salt (CAS RN 3811-73-2)0 %-31.12.2026
0.7348ex 2933 39 9938(2-Chloropyridin-3-yl) methanol (CAS RN 42330-59-6)0 %-31.12.2027
0.8356ex 2933 39 99402-Hydroxypyridine-N-oxide (CAS RN 13161-30-3) with a purity by weight of 98 % or more0 %-31.12.2027
0.8266ex 2933 39 9942Glasdegib maleate (INN) (CAS RN 2030410-25-2) with a purity by weight of 98 % or more0 %-31.12.2026
0.7121ex 2933 39 9946Fluopicolide (ISO) (CAS RN 239110-15-7) with a content by weight of 97 % or more0 %-31.12.2026
0.4706ex 2933 39 9947(-)-trans-4-(4’-Fluorophenyl)-3-hydroxymethyl-N-methylpiperidine (CAS RN 105812-81-5)0 %-31.12.2026
0.4749ex 2933 39 9948Flonicamid (ISO) (CAS RN 158062-67-0)0 %-31.12.2024
0.8335ex 2933 39 99492-Phenyl-2-(2-pyridyl)acetamide (CAS RN 7251-52-7) with a purity by weight of 98 % or more0 %-31.12.2027
0.6812ex 2933 39 9950N,4-Dimethyl-1-(phenylmethyl)- 3-piperidinamine hydrochloride (1:2) (CAS RN 1228879-37-5) with a purity by weight of 98 % or more0 %-31.12.2024
0.5610ex 2933 39 99526-Chloro-3-nitropyridin-2-ylamine (CAS RN 27048-04-0)0 %-31.12.2023
0.4646ex 2933 39 9955Pyriproxyfen (ISO) (CAS RN 95737-68-1) of a purity by weight of 97 % or more0 %-31.12.2024
0.5760ex 2933 39 9957Tert-butyl 3-(6-amino-3-methylpyridin-2-yl)benzoate (CAS RN 1083057-14-0)0 %-31.12.2027
0.7598ex 2933 39 9959Chlorpyrifos-Methyl (ISO) (CAS RN 5598-13-0)0 %-31.12.2023
0.2750ex 2933 39 99602-Fluoro-6-(trifluoromethyl)pyridine (CAS RN 94239-04-0)0 %-31.12.2023
0.7584ex 2933 39 99616-Bromopyridin-2-amine (CAS RN 19798-81-3)0 %-31.12.2023
0.7577ex 2933 39 9962Ethyl 2,6-Dichloronicotinate (CAS RN 58584-86-4)0 %-31.12.2023
0.7617ex 2933 39 9964Methyl 1-(3-chloropyridin-2-yl)-3-hydroxymethyl-1H-pyrazole-5-carboxylate (CAS RN 960316-73-8)0 %-31.12.2023
0.3602ex 2933 39 9965Acetamiprid (ISO) (CAS RN 135410-20-7)0 %-31.12.2023
0.5946ex 2933 39 9967(1R,3S,4S)-tert-Butyl 3-(6-bromo-1H-benzo[d]imidazol-2-yl)-2-azabicyclo[2.2.1]heptane-2-carboxylate (CAS RN 1256387-74-2)0 %-31.12.2023
0.7616ex 2933 39 99681-(3-Chloropyridin-2-yl)-3-[[5-(trifluoromethyl)-2H-tetrazol-2-yl]methyl]-1H-pyrazole-5-carboxylic acid (CAS RN 1352319-02-8) with a purity by weight of 85 % or more0 %-31.12.2023
0.5494ex 2933 39 99702,3-Dichloro-5-trifluoromethylpyridine (CAS RN 69045-84-7)0 %-31.12.2026
0.7704ex 2933 39 9971Diflufenican (ISO) (CAS RN 83164-33-4)0 %-31.12.2024
0.7737ex 2933 39 99736-Chloro-4-(4-fluoro-2-methylphenyl)pyridin-3-amine hydrochloride0 %-31.12.2024
0.7844ex 2933 39 99744-Aminopyridine-2-carboxamide (CAS RN 100137-47-1) with a purity by weight of 98 % or more0 %-31.12.2024
0.8072ex 2933 39 9975Clodinafop-propargyl (ISO) (CAS RN 105512-06-9) with a purity by weight of 90 % or more0 %-31.12.2025
0.7813ex 2933 39 9976Apalutamide (INN) (CAS RN 956104-40-8)0 %-31.12.2024
0.5922ex 2933 39 9977Imazamox (ISO) (CAS RN 114311-32-9)0 %-31.12.2023
0.7818ex 2933 39 9978Niraparib tosylate monohydrate (INNM) (CAS RN 1613220-15-7)0 %-31.12.2024
0.7754ex 2933 39 9979Avibactam (INN) – sodium (CAS RN 1192491-61-4)0 %-31.12.2024
0.8074ex 2933 39 9980Tert-Butyl (3R)-3-(4-amino-2-oxo-2,3-dihydro-1H-imidazo[4, 5-c]pyridin-1-yl)piperidine-1-carboxylate (CAS RN 1971921-33-1) with a purity by weight of 95 % or more0 %-31.12.2025
0.7906ex 2933 39 99814-Hydroxy-3-pyridinesulphonic acid (CAS RN 51498-37-4) with a purity by weight of 98 % or more0 %-31.12.2024
0.7866ex 2933 39 9982Picloram (ISO) (CAS RN 1918-02-1) containing by weight not more than 15 % of water and with a dry weight purity of 92 % or more0 %-31.12.2024
0.7976ex 2933 39 99832-Hydroxy-4-azoniaspiro[3,5]nonane chloride (CAS RN 15285-58-2) with a purity by weight of 97 % or more0 %-31.12.2025
0.7925ex 2933 39 9984Diethyl(3-pyridyl)borane (CAS RN 89878-14-8) with a purity by weight of 98 % or more0 %-31.12.2025
0.5129ex 2933 39 99852-Chloro-5-chloromethylpyridine (CAS RN 70258-18-3)0 %-31.12.2025
0.7981ex 2933 39 99863-(N-Hydroxycarbamimidoyl)pyridine 1-oxide (CAS RN 92757-16-9) with a purity by weight of 97 % or more0 %-31.12.2025
0.7939ex 2933 39 99876-Chloro-N-(2,2-dimethylpropyl)pyridine-3-carboxamide (CAS RN 585544-20-3) with a purity by weight of 97 % or more0 %-31.12.2025
0.8096ex 2933 39 99891-Benzyl-4-phenylpiperidine-4-carbonitrile monohydrochloride (CAS RN 71258-18-9) with a purity by weight of 98 % or more0 %-31.12.2025
0.3603ex 2933 49 1010Quinmerac (ISO) (CAS RN 90717-03-6)0 %-31.12.2023
0.4525ex 2933 49 10203-Hydroxy-2-methylquinoline-4-carboxylic acid (CAS RN 117-57-7)0 %-31.12.2023
0.6339ex 2933 49 10404,7-Dichloroquinoline (CAS RN 86-98-6)0 %-31.12.2024
0.6773ex 2933 49 10501-Cyclopropyl-6,7,8-trifluoro-1,4-dihydro-4-oxo-3-quinolinecarboxylic acid (CAS RN 94695-52-0)0 %-31.12.2025
0.7098ex 2933 49 9025Cloquintocet-mexyl (ISO) (CAS RN 99607-70-2)0 %-31.12.2026
0.4927ex 2933 49 9030Quinoline (CAS RN 91-22-5)0 %-31.12.2025
0.7524ex 2933 49 90456,7-Dimethoxy-3,4- dihydroisoquinoline hydrochloride (CAS RN 20232-39-7)0 %-31.12.2023
0.8037ex 2933 49 90552-(tert-Butoxycarbonyl)-5,7-dichloro-1,2,3,4-tetrahydroisoquinoline-6-carboxylic acid (CAS RN 851784-82-2) with a purity by weight of 98 % or more0 %-31.12.2025
0.3880ex 2933 49 9070Quinolin-8-ol (CAS RN 148-24-3)0 %-31.12.2023
0.8358ex 2933 49 90752-Methyl-4-(1-methyl-1H-1,2,4-triazol-5-yl)quinolin-8-ol (CAS RN 1174132-59-2) with a purity by weight of 98 % or more0 %-31.12.2027
0.4043ex 2933 52 0010Malonylurea (barbituric acid) (CAS RN 67-52-7)0 %-31.12.2026
0.7631ex 2933 54 00105,5 '-(1,2-Diazenediyl)bis [2,4,6 (1H, 3H, 5H)-pyrimidinetrione] (CAS RN 25157-64-6)0 %-31.12.2023
0.6468ex 2933 59 95106-Amino-1,3-dimethyluracil (CAS RN 6642-31-5)0 %-31.12.2024
0.6151ex 2933 59 95132-Diethylamino-6-hydroxy-4-methylpyrimidine (CAS RN 42487-72-9)0 %-31.12.2023
0.2578ex 2933 59 9515Sitagliptin phosphate monohydrate (CAS RN 654671-77-9)0 %-31.12.2023
0.2745ex 2933 59 95202,4-Diamino-6-chloropyrimidine (CAS RN 156-83-2)0 %-31.12.2023
0.6763ex 2933 59 9521N-(2-Oxo-1,2-dihydropyrimidin-4-yl)benzamide (CAS RN 26661-13-2)0 %-31.12.2025
0.5912ex 2933 59 95272-[(2-Amino-6-oxo-1,6-dihydro-9H-purin-9-yl)methoxy]-3-hydroxypropylacetate (CAS RN 88110-89-8)0 %-31.12.2023
0.7810ex 2933 59 95286,8-Difluoro-1-(methylamino)-7-(4-methylpiperazin-1-yl)-4-oxo-1,4-dihydroquinoline-3-carboxylic acid (CAS RN 100276-37-7)0 %-31.12.2024
0.8157ex 2933 59 95292-Amino-4-(4-methylpiperazin-1-yl) benzoic acid tert-butyl ester (CAS RN 1034975-35-3) with a purity by weight of 95 % or more0 %-31.12.2026
0.3600ex 2933 59 9530Mepanipyrim (ISO) (CAS RN 110235-47-7)0 %-31.12.2023
0.8376ex 2933 59 9531Sotorasib (INN) (CAS RN 2296729-00-3) with a purity by weight of 99 % or more0 %-31.12.2027
0.6240ex 2933 59 95334,6-Dichloro-5-fluoropyrimidine (CAS RN 213265-83-9)0 %-31.12.2024
0.7370ex 2933 59 95346-chloro-1,3-dimethyluracil (CAS RN 6972-27-6) with a purity by weight of 97 % or more0 %-31.12.2024
0.7345ex 2933 59 95361-(Cyclopropylcarbonyl)piperazine hydrochloride (CAS RN 1021298-67-8) with a purity by weight of 98 % or more0 %-31.12.2024
0.6419ex 2933 59 95376-Iodo-3-propyl-2-thioxo-2,3-dihydroquinazolin-4(1H)-one (CAS RN 200938-58-5)0 %-31.12.2024
0.8248ex 2933 59 95385-(5-Chlorosulfonyl-2-ethoxyphenyl)-1-methyl-3-propyl-1,6-dihydro-7H-pyrazolo[4,3-d]pyrimidin-7-one (CAS No 139756-22-2) with a purity by weight of 98 % or more0 %-31.12.2026
0.8243ex 2933 59 95412-(4-Phenoxyphenyl)-7-(piperidin-4-yl)-4,5,6,7-tetrahydropyrazolo[1,5-a]pyrimidine-3-carbonitrile (CAS RN 2190506-57-9) with a purity by weight of 98 % or more0 %-31.12.2026
0.8056ex 2933 59 95422-Chloropyrimidine (CAS RN 1722-12-9) with a purity by weight of 98 % or more0 %-31.12.2025
0.4704ex 2933 59 95451-[3-(Hydroxymethyl)pyridin-2-yl]-4-methyl-2-phenylpiperazine (CAS RN 61337-89-1)0 %-31.12.2024
0.6677ex 2933 59 95476-Methyl-2-oxoperhydropyrimidin-4-ylurea (CAS RN 1129-42-6) with a purity of 94 % or more0 %-31.12.2025
0.4699ex 2933 59 95502-(2-Piperazin-1-ylethoxy)ethanol (CAS RN 13349-82-1)0 %-31.12.2024
0.6987ex 2933 59 95526-Benzyladenine (CAS RN 1214-39-7) with a purity by weight of 97 % or more0 %-31.12.2026
0.2744ex 2933 59 95602,6-Dichloro-4,8-dipiperidinopyrimido[5,4-d]pyrimidine (CAS RN 7139-02-8)0 %-31.12.2023
0.7578ex 2933 59 95631-(3-Chlorophenyl) piperazine (CAS RN 6640-24-0)0 %-31.12.2023
0.4772ex 2933 59 95651-Chloromethyl-4-fluoro-1,4-diazoniabicyclo[2.2.2]octane bis(tetrafluoroborate) (CAS RN 140681-55-6)0 %-31.12.2024
0.7825ex 2933 59 9568Guanine (CAS RN 73-40-5) with a purity by weight of 99 % or more0 %-31.12.2024
0.2735ex 2933 59 9570N-(4-Ethyl-2,3-dioxopiperazin-1-ylcarbonyl)-D-2-phenylglycine (CAS RN 63422-71-9)0 %-31.12.2023
0.5542ex 2933 59 95773-(Trifluoromethyl)-5,6,7,8-tetrahydro[1,2,4]triazolo[4,3-a]pyrazine hydrochloride (1:1) (CAS RN 762240-92-6)0 %-31.12.2027
0.7071ex 2933 59 95875-Bromo-2,4-dichloropyrimidine (CAS RN 36082-50-5)0 %-31.12.2026
0.6774ex 2933 69 8013Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more0 %-31.12.2025
0.6621ex 2933 69 80152-Chloro-4,6-dimethoxy-1,3,5-triazine (CAS RN 3140-73-6)0 %-31.12.2025
0.6951ex 2933 69 8017Benzoguanamine (CAS RN 91-76-9)0 %-31.12.2026
0.7721ex 2933 69 80231,3,5-Tris(2,3-dibromopropyl)-1,3,5-triazinane-2,4,6-trione (CAS RN 52434-90-9)0 %-31.12.2024
0.7600ex 2933 69 8027Troclosene sodium dihydrate (INNM) (CAS RN 51580-86-0)0 %-31.12.2023
0.7952ex 2933 69 80332,4,6-Trichloro-1,3,5-triazine (CAS RN 108-77-0) with a purity by weight of 99 % or more0 %-31.12.2025
0.5272ex 2933 69 8040Troclosene sodium (INNM) (CAS RN 2893-78-9)0 %-31.12.2026
0.7464ex 2933 69 80452-(4,6-Bis-(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6)0 %-31.12.2023
0.5131ex 2933 69 8055Terbutryn (ISO) (CAS RN 886-50-0)0 %-31.12.2025
0.4957ex 2933 69 8060Cyanuric acid (CAS RN 108-80-5)0 %-31.12.2025
0.6127ex 2933 69 80651,3,5-Triazine-2,4,6(1H,3H,5H)-trithione, trisodium salt (CAS RN 17766-26-6)0 %-31.12.2023
0.6477ex 2933 69 8075Metamitron (ISO) (CAS RN 41394-05-2)0 %-31.12.2024
0.3882ex 2933 69 8080Tris(2-hydroxyethyl)-1,3,5-triazinetrione (CAS RN 839-90-7)0 %-31.12.2023
0.6960ex 2933 79 0015Ethyl N-(tert-Butoxycarbonyl)-L-pyroglutamate (CAS RN 144978-12-1)0 %-31.12.2026
0.7346ex 2933 79 0025Methyl 2-oxo-2,3-dihydro-1H-indole-6-carboxylate (CAS RN 14192-26-8)0 %-31.12.2024
0.4294ex 2933 79 00305-Vinyl-2-pyrrolidone (CAS RN 7529-16-0)0 %-31.12.2027
0.7453ex 2933 79 00351-tert-Butyl 2-methyl(2S)-5-oxopyrrolidine-1,2-dicarboxylate (CAS RN 108963-96-8)0 %-31.12.2023
0.8038ex 2933 79 00451-Phenyl-3H-indol-2-one (CAS RN 3335-98-6) with a purity by weight of 99 % or more0 %-31.12.2025
0.4524ex 2933 79 00506-Bromo-3-methyl-3H-dibenz(f,ij)isoquinoline-2,7-dione (CAS RN 81-85-6)0 %-31.12.2023
0.8203ex 2933 79 0055(3S,4R)-3-Amino-4-hydroxypyrrolidin-2-one hydrochloride (CAS RN 2446872-13-3) with a purity by weight of 98 % or more0 %-31.12.2026
0.8212ex 2933 79 00651-Dodecyl-2-pyrrolidone (CAS RN 2687-96-9) with a purity by weight of 98 % or more0 %-31.12.2026
0.4985ex 2933 79 0070(S)-N-[(Diethylamino)methyl]-alpha-ethyl-2-oxo-1-pyrrolidineacetamide L-(+)-tartrate, (CAS RN 754186-36-2)0 %-31.12.2025
0.8351ex 2933 79 0075N-(n-octyl)-2-pyrrolidone (CAS RN 2687-94-7) with a purity by weight of 99 % or more0 %-31.12.2027
0.8354ex 2933 79 0080(S)-2-Amino-3-[(S)-2-oxopyrrolidin-3-yl]propanamide hydrochloride (CAS RN 2628280-48-6) with a purity by weight of 98 % or more0 %-31.12.2027
0.3580ex 2933 99 8006Metconazole (ISO) (CAS RN 125116-23-6) with a purity by weight of 98 % or more0 %-31.12.2023
0.8156ex 2933 99 80074-(2-Oxo-2,3-dihydro-1H-benzimidazol-1-yl)butanoic acid (CAS RN 3273-68-5) with a purity by weight of 98 % or more0 %-31.12.2026
0.8180ex 2933 99 8008Prothioconazole (ISO) (CAS RN 178928-70-6) with a purity by weight of 98 % or more0 %-31.12.2026
0.8202ex 2933 99 80095,7-Difluoro-2-(4-fluorophenyl)-1H-indole (CAS RN 901188-04-3) with a purity by weight of 98 % or more0 %-31.12.2026
0.8324ex 2933 99 8010(R)-2-(2,5-difluorophenyl)pyrrolidine hydrochloride (CAS RN 1218935-60-4) with a purity by weight of 98 % or more0 %-31.12.2027
0.6563ex 2933 99 8011Fenbuconazole (ISO) (CAS RN 114369-43-6)0 %-31.12.2024
0.6564ex 2933 99 8012Myclobutanil (ISO) (CAS RN 88671-89-0)0 %-31.12.2024
0.5243ex 2933 99 80135-Difluoromethoxy-2-mercapto-1-H-benzimidazole (CAS RN 97963-62-7)0 %-31.12.2026
0.6146ex 2933 99 80142-(2H-benzotriazol-2-yl)-4-methyl-6-(2-methylprop-2-en-1-yl)phenol(CAS RN 98809-58-6)0 %-31.12.2023
0.2731ex 2933 99 80152-(2H-Benzotriazol-2-yl)-4,6-di-tert-pentylphenol (CAS RN 25973-55-1)0 %-31.12.2023
0.6872ex 2933 99 8016Pyridate (ISO)(CAS RN 55512-33-9) with a purity by weight of 90 % or more0 %-31.12.2025
0.8359ex 2933 99 8017(1R,2S,5S)-3-[(S)-3,3-dimethyl-2-(2,2,2-trifluoroacetamido)butanoyl]-6,6-dimethyl-3-azabicyclo[3.1.0]hexane-2-carboxylic acid (CAS RN 2755812-45-2) with a purity by weight of 98 % or more0 %-31.12.2027
0.8290ex 2933 99 80182-(2-Ethoxyphenyl)-5-methyl-7-propylimidazolo[5,1-f][1,2,4]-triazin-4(3H)-one (CAS RN 224789-21-3) with a purity by weight of 95 % or more0 %-31.12.2026
0.6567ex 2933 99 80192-(2,4-Dichlorophenyl)-3-(1H-1,2,4-triazol-1-yl)propan-1-ol (CAS RN 112281-82-0)0 %-31.12.2024
0.2732ex 2933 99 80202-(2H-Benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)phenol (CAS RN 70321-86-7)0 %-31.12.2023
0.6829ex 2933 99 80211-(Bis(dimethylamino)methylene)-1H-[1,2,3]triazolo[4,5-b]pyridinium 3-oxide hexafluorophosphate(V) (CAS RN 148893-10-1)0 %-31.12.2025
0.8249ex 2933 99 8022Dibenz[b,f]azepine-5-carbonyl chloride (CAS RN 33948-22-0) with a purity by weight of 98 % or more0 %-31.12.2026
0.6244ex 2933 99 8023Tebuconazole (ISO) (CAS RN 107534-96-3) with a purity by weight of 95 % or more0 %-31.12.2024
0.5625ex 2933 99 80241,3-Dihydro-5,6-diamino-2H-benzimidazol-2-one (CAS RN 55621-49-3)0 %-31.12.2027
0.8089ex 2933 99 80256-(4-Benzylamino-3-nitrophenyl)-5-methyl-4,5-dihydro-2H-pyridazin-3-one (CAS RN 77469-62-6) with a purity by weight of 95 % or more0 %-31.12.2025
0.8418ex 2933 99 8026Benzotriazole-1-yl-oxy-tris-pyrrolidino-phosphonium hexafluorophosphate (CAS RN 128625-52-5) with a purity by weight of 97 % or more0 %-31.12.2027
0.6409ex 2933 99 80275,6-Dimethylbenzimidazole (CAS RN 582-60-5)0 %-31.12.2024
0.8357ex 2933 99 80287-(2-Methyl-4-nitrophenoxy)-[1,2,4]triazolo[1,5-a]pyridine (CAS RN 937263-44-0) with a purity by weight of 98 % or more0 %-31.12.2027
0.3593ex 2933 99 8030Quizalofop-P-ethyl (ISO) (CAS RN 100646-51-3)0 %-31.12.2023
0.8284ex 2933 99 80321H-1,2,3-Triazole (CAS RN 288-36-8) or 2H-1,2,3-triazole (CAS RN 288-35-7) with a purity by weight of 99 % or more0 %-31.12.2026
0.6249ex 2933 99 8033Penconazole (ISO) (CAS RN 66246-88-6)0 %-31.12.2024
0.7043ex 2933 99 80342,4-Dihydro-5-methoxy-4-methyl-3H-1,2,4-triazol-3-on (CAS RN 135302-13-5)0 %-31.12.2026
0.6958ex 2933 99 80363-Chloro-2-(1,1-difluoro-3-buten-1-yl)-6-methoxyquinoxaline (CAS RN 1799733-46-2)0 %-31.12.2023
0.4695ex 2933 99 80378-Chloro-5,10-dihydro-11H-dibenzo [b,e] [1,4]diazepin-11-one (CAS RN 50892-62-1)0 %-31.12.2024
0.7045ex 2933 99 8038(4aS,7aS)-Octahydro-1H-pyrrolo[3,4-b]pyridine (CAS RN 151213-40-0)0 %-31.12.2026
0.3591ex 2933 99 8040trans-4-Hydroxy-L-proline (CAS RN 51-35-4)0 %-31.12.2023
0.7273ex 2933 99 80415-[4'-(Bromomethyl)biphenyl-2-yl]-1-trityl-1H-tetrazole (CAS RN 124750-51-2)0 %-31.12.2027
0.7185ex 2933 99 8042(S)-2,2,4-Trimethylpyrrolidine hydrochloride (CAS RN 1897428-40-8)0 %-31.12.2026
0.3582ex 2933 99 8045Maleic hydrazide (ISO) (CAS RN 123-33-1)0 %-31.12.2023
0.7269ex 2933 99 8046(S)-Indoline-2-carboxylic acid (CAS RN 79815-20-6)0 %-31.12.2027
0.5818ex 2933 99 8047Paclobutrazol (ISO) (CAS RN 76738-62-0)0 %-31.12.2027
0.7410ex 2933 99 80485-Amino-6-methyl-2-benzimidazolone (CAS RN 67014-36-2)0 %-31.12.2027
0.5945ex 2933 99 8053Potassium (S)-5-(tert-butoxycarbonyl)-5-azaspiro[2.4]heptane-6-carboxylate (CAS RN 1441673-92-2) (5)0 %-31.12.2023
0.6599ex 2933 99 80543-(Salicyloylamino)-1,2,4-triazole (CAS RN 36411-52-6)0 %-31.12.2025
0.4585ex 2933 99 8055Pyridaben (ISO) (CAS RN 96489-71-3)0 %-31.12.2024
0.7457ex 2933 99 8056Methyl 3,5-diamino-6-chloropyrazine-2-carboxylate (CAS RN 1458-01-1)0 %-31.12.2023
0.5901ex 2933 99 80572-(5-Methoxyindol-3-yl)ethylamine (CAS RN 608-07-1)0 %-31.12.2023
0.7649ex 2933 99 8058Ipconazole (ISO) (CAS RN 125225-28-7) with a purity by weight of 90 % or more0 %-31.12.2023
0.7673ex 2933 99 8059Hydrates of Hydroxybenzotriazole (CAS RN 80029-43-2 and CAS RN 123333-53-9)0 %-31.12.2023
0.7927ex 2933 99 80602-[(6,11-Dihydro-5H-dibenz[b,e]azepin-6-yl)-methyl]-1H-isoindole-1,3(2H)-dione (CAS RN 143878-20-0) with a purity by weight of 99 % or more0 %-31.12.2025
0.7624ex 2933 99 8061(1R,5S)-8-Benzyl-8-azabicyclo(3.2.1)octan-3-one hydrochloride (CAS RN 83393-23-1)0 %-31.12.2023
0.7680ex 2933 99 8063L-Prolinamide (CAS RN 7531-52-4)0 %-31.12.2023
0.7839ex 2933 99 8066(6-(4-Fluorobenzyl)-3,3-dimethyl-2,3-dihydro-1H-pyrrolo[3,2-b]pyrid-5-yl)methanol (CAS RN 1799327-42-6) with a purity by weight of 98 % or more0 %-31.12.2024
0.5468ex 2933 99 8067Candesartan ethyl ester (INNM) (CAS RN 139481-58-6)0 %-31.12.2026
0.7679ex 2933 99 80685-((1S,2S)-2-((2R,6S,9S,11R,12R,14aS,15S,16S,20R,23S,25aR)-9-Amino-20-((R)-3-amino-1-hydroxy-3-oxopropyl)-2,11,12,15-tetrahydroxy-6-((R)-1-hydroxyethyl)-16-methyl-5,8,14,19,22,25-hexaoxotetracosahydro-1H-dipyrrolo[2,1-c:2',1'-l][1,4,7,10,13,16]hexaazacyclohenicosin-23-yl)-1,2-dihydroxyethyl)-2-hydroxyphenyl hydrogen sulphate (CAS RN 168110-44-9)0 %-31.12.2023
0.8053ex 2933 99 80695-Formyl-2,4-dimethyl-1H-pyrrole-3-carboxylic acid (CAS RN 253870-02-9) with a purity by weight of 96 % or more0 %-31.12.2025
0.7971ex 2933 99 80705-(Bis-(2-hydroxyethyl)-amino)-1-methyl-1H-benzimidazole-2-butanoic acid ethyl ester (CAS RN 3543-74-6) with a purity by weight of 98 % or more0 %-31.12.2025
0.4384ex 2933 99 807110-Methoxyiminostilbene (CAS RN 4698-11-7)0 %-31.12.2023
0.4503ex 2933 99 80721,4,7-Trimethyl-1,4,7-triazacyclononane (CAS RN 96556-05-7)0 %-31.12.2023
0.7759ex 2933 99 80751-[Bis(dimethylamino)methylene]-1H-benzotriazolium hexafluorophosphate(1-) 3-oxide (CAS RN 94790-37-1)0 %-31.12.2024
0.8054ex 2933 99 80762-Methylindoline (CAS RN 6872-06-6) with a purity by weight of 98 % or more0 %-31.12.2025
0.8064ex 2933 99 80779-[1,1′-Biphenyl]-3-yl-9′-[1,1′-biphenyl]-4-yl-3,3′-bi-9H-carbazole (CAS RN 1643479-47-3) with a purity by weight of 95 % or more0 %-31.12.2025
0.4382ex 2933 99 80783-Amino-3-azabicyclo (3.3.0) octane hydrochloride (CAS RN 58108-05-7)0 %-31.12.2023
0.8014ex 2933 99 8080Pyrrole-2-carboxaldehyde (CAS RN 1003-29-8) with a purity by weight of 97 % or more0 %-31.12.2025
0.4164ex 2933 99 80811,2,3-Benzotriazole (CAS RN 95-14-7)0 %-31.12.2026
0.4165ex 2933 99 8082Tolytriazole (CAS RN 29385-43-1)0 %-31.12.2023
0.6933ex 2933 99 8087Carfentrazone-ethyl (ISOM) (CAS RN 128639-02-1) with a purity by weight of 90 % or more0 %-31.12.2025
0.3579ex 2934 10 0010Hexythiazox (ISO) (CAS RN 78587-05-0)0 %-31.12.2023
0.2725ex 2934 10 00202-(4-Methylthiazol-5-yl)ethanol (CAS RN 137-00-8)0 %-31.12.2023
0.5538ex 2934 10 0035(2-Isopropylthiazol-4-yl)-N-methylmethanamine dihydrochloride (CAS RN 1185167-55-8)0 %-31.12.2027
0.6264ex 2934 10 00452-Cyanimino-1,3-thiazolidine (CAS RN 26364-65-8)0 %-31.12.2024
0.4750ex 2934 10 0060Fosthiazate (ISO) (CAS RN 98886-44-3)0 %-31.12.2024
0.7312ex 2934 20 8015Benthiavalicarb-isopropyl (ISO) (CAS RN 177406-68-7)0 %-31.12.2027
0.4346ex 2934 20 80251,2-Benzisothiazol-3(2H)-one (CAS RN 2634-33-5) in the form of a powder with a purity by weight of 95 % or more, or in an aqueous mixture containing by weight 20 % or more of 1,2-benzisothiazol-3(2H)-one0 %-31.12.2027
0.4910ex 2934 20 8070N,N-Bis(1,3-benzothiazol-2-ylsulphanyl)-2-methylpropan-2-amine (CAS RN 3741-80-8)0 %-31.12.2025
0.5537ex 2934 30 90102-Methylthiophenothiazine (CAS RN 7643-08-5)0 %-31.12.2027
0.6492ex 2934 99 9010Fluralaner (INN) (CAS RN 864731-61-3)0 %-31.12.2024
0.8388ex 2934 99 9011Aqueous solution of d(P-thio)(T-G-A-C-T-G-T-G-A-A-C-G-T-T-C-G-A-G-A-T-G-A) deoxyribonucleic acid (CAS RN 937402-51-2), containing by weight 15 % or more, but not more than 25 % of oligodeoxynucleotide0 %-31.12.2027
0.5924ex 2934 99 9012Dimethomorph (ISO) (CAS RN 110488-70-5)0 %-31.12.2023
0.8348ex 2934 99 9013(6S)-6-methyl-5,6-Dihydro-4H-thieno[2,3-b]thiopyran4-one-7,7-dioxide (CAS RN 148719-91-9) with a purity by weight of 98 % or more0 %-31.12.2027
0.8326ex 2934 99 90142-Mercaptoadenosine (CAS RN 43157-50-2) with a purity by weight of 98 % or more0 %-31.12.2027
0.3577ex 2934 99 9015Carboxin (ISO) (CAS RN 5234-68-4)0 %-31.12.2023
0.6476ex 2934 99 9016Difenoconazole (ISO) (CAS RN 119446-68-3)0 %-31.12.2024
0.7843ex 2934 99 9017(S)-4-(Tert-butoxycarbonyl)-1,4-oxazepane-2-carboxylic acid (CAS RN 1273567-44-4) with a purity by weight of 95 % or more0 %-31.12.2024
0.8250ex 2934 99 9018Methyl (1R,3R)-1-(1,3-benzodioxol-5-yl)-2-(2-chloroacetyl)-1,3,4,9-tetrahydropyrido[5,4-b]indole-3-carboxylate (CAS RN 171489-59-1) with a purity by weight of 99 % or more0 %-31.12.2026
0.4715ex 2934 99 9020Thiophene (CAS RN 110-02-1)0 %-31.12.2024
0.8253ex 2934 99 90224-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4) with a purity by weight of 97 % or more0 %-31.12.2026
0.5263ex 2934 99 9023Bromuconazole (ISO) with a purity by weight of 96 % or more (CAS RN 116255-48-2)0 %-31.12.2026
0.6241ex 2934 99 9024Flufenacet (ISO) (CAS RN 142459-58-3) with a purity by weight of 95 % or more0 %-31.12.2024
0.4942ex 2934 99 90252,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8)0 %-31.12.2025
0.6252ex 2934 99 90264-Methylmorpholine 4-oxide in an aqueous solution (CAS RN 7529-22-8)0 %-31.12.2024
0.6362ex 2934 99 90272-(4-Hydroxyphenyl)-1-benzothiophene-6-ol (CAS RN 63676-22-2)0 %-31.12.2024
0.5242ex 2934 99 902811-(Piperazin-1-yl)dibenzo[b,f][1,4]thiazepine dihydrochloride (CAS RN 111974-74-4)0 %-31.12.2026
0.7837ex 2934 99 9029(2R,5S)-tert-Butyl 4-benzyl-2-methyl-5-(((R)-3-methylmorpholino)methyl)piperazine-1-carboxylate (CAS RN 1403902-77-1) with a purity by weight of 98 % or more0 %-31.12.2024
0.4700ex 2934 99 9030Dibenzo[b,f][1,4]thiazepin-11(10H)-one (CAS RN 3159-07-7)0 %-31.12.2024
0.7840ex 2934 99 9033(2R,3R,5R)-5-(4-Amino-2-oxopyrimidin-1(2H)-yl)-2-((benzoyloxy)methyl)-4,4-difluorotetrahydrofuran-3-yl benzoate (CAS RN 134790-39-9) with a purity by weight of 98 % or more0 %-31.12.2024
0.8267ex 2934 99 9035Nusinersen sodium (INNM) (CAS RN 1258984-36-9) with a purity by weight of 95 % or more0 %-31.12.2026
0.5813ex 2934 99 90374-Propan-2-ylmorpholine (CAS RN 1004-14-4)0 %-31.12.2027
0.6824ex 2934 99 90394-(Oxiran-2-ylmethoxy)-9H-carbazole (CAS RN 51997-51-4)0 %-31.12.2025
0.8094ex 2934 99 90402,3-Pyrazinedicarboxylic anhydride (CAS RN 4744-50-7) with a purity by weight of 95 % or more0 %-31.12.2025
0.6823ex 2934 99 904111-[4-(2-Chloro-ethyl)-1-piperazinyl]dibenzo(b,f)(1,4)thiazepine (CAS RN 352232-17-8)0 %-31.12.2025
0.6922ex 2934 99 90421-(Morpholin-4-yl)prop-2-en-1-one (CAS RN 5117-12-4)0 %-31.12.2024
0.8176ex 2934 99 9043Fludioxonil (ISO) (CAS RN 131341-86-1) with a purity by weight of 99 % or more0 %-31.12.2026
0.6893ex 2934 99 9044Propiconazole (ISO) (CAS RN 60207-90-1) with a purity by weight of 92 % or more0 %-31.12.2025
0.8380ex 2934 99 90454-[4-[(5s)-5-(Aminomethyl)-2-oxo-3-oxazolidinyl] phenyl]-3-morpholinone, hydrochloride (CAS RN 898543-06-1) with a purity by weight of 98 % or more0 %-31.12.2027
0.5453ex 2934 99 9048Propan-2-ol -- 2-methyl-4-(4-methylpiperazin-1-yl)-10H-thieno[2,3-b][1,5]benzodiazepine (1:2) dihydrate (CAS RN 864743-41-9)0 %-31.12.2026
0.7188ex 2934 99 9049Cytidine 5'-(disodium phosphate) (CAS RN 6757-06-8)0 %-31.12.2026
0.8330ex 2934 99 9051Uridine 5’-triphosphate trisodium salt (CAS RN 19817-92-6) with a dry weight purity of 90 % or more0 %-31.12.2027
0.7259ex 2934 99 9052Epoxiconazole (ISO) (CAS RN 133855-98-8)0 %-31.12.2027
0.8031ex 2934 99 9055Uridine (CAS RN 58-96-8) with a purity by weight of 98 % or more0 %-31.12.2025
0.7297ex 2934 99 90561-[5-(2,6-Difluorophenyl)-4,5-dihydro-1,2-oxazol-3-yl]ethanone (CAS RN 1173693-36-1)0 %-31.12.2027
0.3575ex 2934 99 9058Dimethenamide-P (ISO) (CAS RN 163515-14-8)0 %-31.12.2023
0.7387ex 2934 99 9059Dolutegravir (INN) (CAS RN 1051375-16-6) or dolutegravir sodium (CAS RN 1051375-19-9)0 %-31.12.2027
0.2718ex 2934 99 9060DL-Homocysteine thiolactone hydrochloride (CAS RN 6038-19-3)0 %-31.12.2023
0.7459ex 2934 99 90615-(1,2-Dithiolan-3-yl)valeric acid (CAS RN 1077-28-7)0 %-31.12.2023
0.7536ex 2934 99 9062(2b,3a,5a,16b,17b)-2-(Morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol 17-acetate (CAS RN 119302-24-8)0 %-31.12.2023
0.7537ex 2934 99 9063(2b,3a,5a,16b,17b)-2-(Morpholin-4-yl)-16-(pyrrolidin-1-yl)androstane-3,17-diol (CAS RN 119302-20-4)0 %-31.12.2023
0.7449ex 2934 99 90642-Bromo-5-benzoylthiophene (CAS RN 31161-46-3)0 %-31.12.2023
0.7926ex 2934 99 9065Benzo[b]thiophen-10-methoxycycloheptanone (CAS RN 59743-84-9) with a purity by weight of 98 % or more0 %-31.12.2025
0.4512ex 2934 99 9066Tetrahydrothiophene-1,1-dioxide (CAS RN 126-33-0)0 %-31.12.2023
0.7809ex 2934 99 9068Afatinib dimaleate (INNM) (CAS RN 850140-73-7)0 %-31.12.2024
0.7842ex 2934 99 90693-Methyl-5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzo[d]oxazol-2(3H)-one (CAS RN 1220696-32-1) with a purity by weight of 95 % or more0 %-31.12.2024
0.7944ex 2934 99 90701,3,4-Thiadiazolidine-2,5-dithione (CAS RN 1072-71-5) with a purity by weight of 95 % or more0 %-31.12.2025
0.8289ex 2934 99 90713,4-Dichloro-1,2,5-thiadiazole (CAS RN 5728-20-1) with a purity by weight of 99 % or more0 %-31.12.2026
0.8317ex 2934 99 90722-Trifluoromethyl-9-allyl-9-thioxanthen-ol (CAS RN 850808-70-7) with a purity by weight of 98 % or more0 %-31.12.2027
0.7731ex 2934 99 9073Tetrahydrouridine (CAS RN 18771-50-1)0 %-31.12.2024
0.4249ex 2934 99 90742-Isopropylthioxanthone (CAS RN 5495-84-1)0 %-31.12.2027
0.4052ex 2934 99 9075(4R-cis)-1,1-Dimethylethyl-6-[2[2-(4-fluorophenyl)-5-(1-isopropyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrol-1-yl]ethyl]-2,2-dimethyl-1,3-dioxane-4-acetate (CAS RN 125971-95-1)0 %-31.12.2026
0.4058ex 2934 99 90

ex 3204 20 00
76

10
2,5-Thiophenediylbis(5-tert-butyl-1,3-benzoxazole) (CAS RN 7128-64-5)0 %-31.12.2026
0.8221ex 2934 99 9077Tazemetostat (INN) (CAS 1403254-99-8) with a purity by weight of 99 % or more and its salts0 %-31.12.2026
0.7579ex 2934 99 9078[(3aS,5R,6S,6aS)-6-Hydroxy-2,2-dimethyltetrahydrofuro[2,3-d][1,3]dioxol-5-yl] (morpholino)methanone (CAS RN 1103738-19-7)0 %-31.12.2023
0.4388ex 2934 99 9079Thiophen-2-ethanol (CAS RN 5402-55-1)0 %-31.12.2023
0.7657ex 2934 99 90802-(Dimethylamino)-2-[(4-methylphenyl)methyl]-1-[4-(morpholin-4-yl)phenyl]butan-1-one (CAS RN 119344-86-4)0 %-31.12.2023
0.8048ex 2934 99 90811-(4-Aminophenyl)-5-(morpholin-4-yl)-2,3-dihydropyridin-6-one (CAS RN 1267610-26-3) with a purity by weight of 98 % or more0 %-31.12.2025
0.7815ex 2934 99 9082Rel-(3aR,12bR)-11-Chloro-2,3,3a,12b-tetrahydro-2-methyl-1H-dibenz[2,3:6,7]oxepino[4,5-c]pyrrol-1-one (CAS RN 129385-59-7) with a purity by weight of 97 % or more0 %-31.12.2024
0.4643ex 2934 99 9083Flumioxazin (ISO) (CAS RN 103361-09-7) of a purity by weight of 96 % or more0 %-31.12.2024
0.4645ex 2934 99 9084Etoxazole (ISO) (CAS RN 153233-91-1) of a purity by weight of 94,8 % or more0 %-31.12.2024
0.8222ex 2934 99 9085Gilteritinib (INN) (CAS 1254053-43-4) with a purity by weight of 98 % or more and its salts0 %-31.12.2026
0.5133ex 2934 99 9086Dithianon (ISO) (CAS RN 3347-22-6)0 %-31.12.2025
0.5136ex 2934 99 90872,2’-(1,4-Phenylene)bis(4H-3,1-benzoxazin-4-one) (CAS RN 18600-59-4)0 %-31.12.2025
0.7738ex 2934 99 9088(7S,9aS)-7-((Benzyloxy)methyl)octahydropyrazino[2,1-c][1,4]oxazine dioxalate (CAS RN 1268364-46-0)0 %-31.12.2024
0.6486ex 2935 90 9010Florasulam (ISO) (CAS RN 145701-23-1)0 %-31.12.2024
0.3566ex 2935 90 9015Flupyrsulfuron-methyl-sodium (ISO) (CAS RN 144740-54-5)0 %-31.12.2023
0.8173ex 2935 90 90184-Amino-2,5-dimethoxy-N-methylbenzenesulfonamide (CAS RN 49701-24-8) with a purity by weight of 98 % or more0 %-31.12.2026
0.8174ex 2935 90 90194-Amino-2,5-dimethoxy-N-phenylbenzenesulphonamide (CAS RN 52298-44-9) with a purity by weight of 98 % or more0 %-31.12.2026
0.3565ex 2935 90 9020Toluenesulphonamides0 %-31.12.2023
0.8224ex 2935 90 9021Encorafenib (INN) (CAS 1269440-17-6) with a purity by weight of 99 % or more0 %-31.12.2026
0.8276ex 2935 90 9022Methyl 2-(chlorosulfonyl)-4-(methylsulfonamidomethyl)benzoate (CAS RN 393509-79-0) with a purity by weight of 90 % or more0 %-31.12.2026
0.5239ex 2935 90 9023N-[4-(2-Chloroacetyl)phenyl]methanesulphonamide (CAS RN 64488-52-4)0 %-31.12.2026
0.8277ex 2935 90 90243-({[(4-methylphenyl)sulfonyl]carbamoyl}amino)phenyl 4-methylbenzenesulfonate (CAS RN 232938-43-1) with a purity by weight of 99 % or more0 %-31.12.2026
0.3563ex 2935 90 9025Triflusulfuron-methyl (ISO) (CAS RN 126535-15-7)0 %-31.12.2023
0.5261ex 2935 90 9027Methyl (3R,5S,6E)-7-{4-(4-fluorophenyl)-6-isopropyl-2-[methyl(methylsulfonyl)amino]pyrimidin-5-yl}-3,5-dihydroxyhept-6-enoate (CAS RN 147118-40-9)0 %-31.12.2026
0.5894ex 2935 90 9028N-Fluorobenzenesulphonimide (CAS RN 133745-75-2)0 %-31.12.2023
0.8350ex 2935 90 9029Vemurafenib (INN) (CAS RN 918504-65-1) with a purity by weight of 98 % or more0 %-31.12.2027
0.7183ex 2935 90 90306-Aminopyridine-2-sulfonamide (CAS RN 75903-58-1)0 %-31.12.2026
0.8413ex 2935 90 90315-(N-3-methylphenyl-sulfonylamido)-(N’,N’’-bis-(3-methylphenyl)-isophthalicacid-diamide) (CAS RN 2375645-78-4) with a purity by weight of 95 % or more0 %-31.12.2027
0.7677ex 2935 90 90334-Chloro-3-pyridinesulphonamide (CAS RN 33263-43-3)0 %-31.12.2023
0.3564ex 2935 90 9035Chlorsulfuron (ISO) (CAS RN 64902-72-3)0 %-31.12.2023
0.7572ex 2935 90 90371,3-Dimethyl-1H-pyrazole-4-sulfonamide (CAS RN 88398-53-2)0 %-31.12.2023
0.7438ex 2935 90 9040Venetoclax (INN) (CAS 1257044-40-8)0 %-31.12.2027
0.5036ex 2935 90 9042Penoxsulam (ISO) (CAS RN 219714-96-2)0 %-31.12.2025
0.6370ex 2935 90 9043Oryzalin (ISO) (CAS RN 19044-88-3)0 %-31.12.2024
0.7928ex 2935 90 90444-[2-(7-Methoxy-4,4-dimethyl-1,3-dioxo-3,4-dihydroisoquinolin-2(1H)-yl)ethyl]bezenesulphonamide (CAS RN 33456-68-7) with a purity by weight of 99,5 % or more0 %-31.12.2025
0.3562ex 2935 90 9045Rimsulfuron (ISO) (CAS RN 122931-48-0)0 %-31.12.2023
0.6242ex 2935 90 9047Halosulfuron-methyl (ISO) (CAS RN 100784-20-1) with a purity by weight of 98 % or more0 %-31.12.2024
0.5451ex 2935 90 9048(3R,5S,6E)-7-[4-(4-Fluorophenyl)-2-[methyl(methylsulfonyl)amino]-6-(propan-2-yl)pyrimidin-5-yl]-3,5-dihydroxyhept-6-enoic acid -- 1-[(R)-(4-chlorophenyl)(phenyl)methyl]piperazine (1:1) (CAS RN 1235588-99-4)0 %-31.12.2026
0.2843ex 2935 90 90504,4'-Oxydi(benzenesulphonohydrazide) (CAS RN 80-51-3)0 %-31.12.2023
0.4636ex 2935 90 90532,4-Dichloro-5-sulphamoylbenzoic acid (CAS RN 2736-23-4)0 %-31.12.2024
0.6777ex 2935 90 9054Propoxycarbazone-sodium (ISO) (CAS RN 181274-15-7) with a purity by weight of 95 % or more0 %-31.12.2025
0.3560ex 2935 90 9055Thifensulfuron-methyl (ISO) (CAS RN 79277-27-3)0 %-31.12.2023
0.6802ex 2935 90 9056N-(p-Toluenesulphonyl)-N'-(3-(p-toluenesulphonyloxy)phenyl)urea (CAS RN 232938-43-1)0 %-31.12.2025
0.6903ex 2935 90 9057N-{2-[(phenylcarbamoyl)amino]phenyl}benzenesulphonamide (CAS RN 215917-77-4)0 %-31.12.2025
0.6664ex 2935 90 9059Flazasulfuron (ISO) (CAS RN 104040-78-0) with a purity of 94 % by weight or more0 %-31.12.2025
0.7676ex 2935 90 90604-[(3-Methylphenyl)amino]pyridine-3-sulfonamide (CAS RN 72811-73-5)0 %-31.12.2023
0.4586ex 2935 90 9063Nicosulphuron (ISO), (CAS RN 111991-09-4) of a purity by weight of 91 % or more0 %-31.12.2024
0.3561ex 2935 90 9065Tribenuron-methyl (ISO) (CAS RN 101200-48-0)0 %-31.12.2023
0.5539ex 2935 90 9068(2S)-2-Benzyl-N,N-dimethylaziridine-1-sulfonamide (CAS RN 902146-43-4) with purity by weight of 95,5 % or more0 %-31.12.2024
0.7854ex 2935 90 9070(4S)-4-Hydroxy-2-(3-methoxypropyl)-3,4-dihydro-2H-thieno[3,2-e]thiazine-6-sulfonamide-1,1-dioxide (CAS RN 154127-42-1) with a purity by weight of 97 % or more0 %-31.12.2024
0.3559ex 2935 90 9075Metsulfuron-methyl (ISO) (CAS RN 74223-64-6)0 %-31.12.2023
0.8055ex 2935 90 90804-Chloro-3-sulphamoylbenzoic acid (CAS RN 1205-30-7) with a purity by weight of 97 % or more0 %-31.12.2025
0.2844ex 2935 90 9085N-[4-(Isopropylaminoacetyl)phenyl]methanesulphonamide hydrochloride0 %-31.12.2024
0.3704ex 2935 90 9088N-(2-(4-Amino-N-ethyl-m-toluidino)ethyl)methanesulphonamide sesquisulphate monohydrate (CAS RN 25646-71-3)0 %-31.12.2023
0.4048ex 2935 90 90893-(3-Bromo-6-fluoro-2-methylindol-1-ylsulphonyl)-N,N-dimethyl-1,2,4-triazol-1-sulphonamide (CAS RN 348635-87-0)0 %-31.12.2026
0.4944ex 2938 90 3010Ammonium glycyrrhizate (CAS RN 53956-04-0)0 %-31.12.2025
0.3554ex 2938 90 9010Hesperidin (CAS RN 520-26-3)0 %-31.12.2023
0.5927ex 2938 90 9020Ethylvanillin beta-D-glucopyranoside (CAS RN 122397-96-0)0 %-31.12.2023
0.7329ex 2938 90 9030Rebaudioside A (CAS RN 58543-16-1)0 %-31.12.2027
0.8178ex 2939 79 90501-Alpha-H,5-alpha-H-Nortropan-3-alpha-ol (CAS RN 538-09-0) with a purity by weight of 99 % or more0 %-31.12.2026
0.7456ex 2939 79 90604-Methyl-2-pyridylamine (CAS RN 695-34-1) with a purity by weight of 98 % or more0 %-31.12.2023
0.7047ex 2940 00 0030D(+)- Trehalose dihydrate (CAS RN 6138-23-4)0 %-31.12.2026
0.7757ex 2940 00 00502,3,4,6-Tetrakis-O-(phenylmethyl)-D-galactopyranose (CAS RN 6386-24-9)0 %-31.12.2024
0.8424ex 2940 00 0060Methyl α-D-mannopyranoside (CAS RN 617-04-9) with a purity by weight of 98 % or more0 %-31.12.2027
0.5233ex 2941 20 3010Dihydrostreptomycin sulphate (CAS RN 5490-27-7)0 %-31.12.2026
0.6984ex 2942 00 0010Sodium triacetoxyborohydride (CAS RN 56553-60-7)0 %-31.12.2026
0.35553201 20 00Wattle extract0 %-31.12.2023
0.7943ex 3201 90 2010Rhus chinensis gall (Galla chinensis) water-based extract, with a tannin content by weight of 85 % or less0 %-31.12.2025
0.3553ex 3201 90 9020Tanning extracts derived from gambier and myrobalan fruits0 %-31.12.2023
0.6183ex 3204 11 0015Colourant C.I. Disperse Blue 360 (CAS RN 70693-64-0) and preparations based thereon with a colourant C.I. Disperse Blue 360 content of 99 % or more by weight0 %-31.12.2023
0.6277ex 3204 11 0025N-(2-Chloroethyl)-4-[(2,6-dichloro-4-nitrophenyl)azo]-N-ethyl-m-toluidine (CAS RN 63741-10-6)0 %-31.12.2024
0.5134ex 3204 11 0045Preparation of dispersion dyes, containing:

—C.I. Disperse Orange 61 (CAS RN 12270-45-0) or Disperse Orange 288 (CAS RN 96662-24-7),

—C.I. Disperse Blue 291:1 (CAS RN 872142-01-3),

—C.I. Disperse Violet 93:1 (CAS RN 122463-28-9),

whether or not containing C.I. Disperse Red 54 (CAS RN 6657-37-0)
0 %-31.12.2025
0.5264ex 3204 11 0050Colourant C.I. Disperse Blue 72 (CAS RN 81-48-1) and preparations based thereon with a colourant C.I. Disperse Blue 72 content of 95 % or more by weight0 %-31.12.2027
0.6972ex 3204 12 0015Colourant C.I. Acid Brown 75 (CAS RN 8011-86-7) and preparations based thereon with a colourant C.I. Acid Brown 75 content of 75 % or more by weight0 %-31.12.2026
0.6975ex 3204 12 0017Colourant C.I. Acid Brown 355 (CAS RN 84989-26-4 or 60181-77-3) and preparations based thereon with a colourant C.I. Acid Brown 355 content of 75 % or more by weight0 %-31.12.2026
0.7021ex 3204 12 0025Colourant C.I. Acid Black 210 (CAS RN 85223-29-6 or 99576-15-5) and preparations based thereon with a colourant C.I. Acid Black 210 content of 50 % or more by weight0 %-31.12.2026
0.6976ex 3204 12 0027Colourant C.I. Acid Brown 425 (CAS RN 75234-41-2 or 119509-49-8) and preparations based thereon with a colourant C.I. Acid Brown 425 content of 75 % or more by weight0 %-31.12.2026
0.6963ex 3204 12 0035Colourant C.I. Acid Black 234 (CAS RN 157577-99-6) and preparations based thereon with a colourant C.I. Acid Black 234 content of 75 % or more by weight0 %-31.12.2026
0.6964ex 3204 12 0037Colourant C.I. Acid Black 210 sodium salt (CAS RN 201792-73-6) and preparations based thereon with a colourant C.I. Acid Black 210 sodium salt content of 50 % or more by weight0 %-31.12.2026
0.5925ex 3204 12 0040Liquid dye preparation containing anionic acid dye C.I. Acid Blue 182 (CAS RN 12219-26-0)0 %-31.12.2023
0.6965ex 3204 12 0045Colourant C.I. Acid Blue 161/193 (CAS RN 12392-64-2) and preparations based thereon with a colourant C.I. Acid Blue 161/193 content of 75 % or more by weight0 %-31.12.2026
0.6971ex 3204 12 0047Colourant C.I. Acid Brown 58 (CAS RN 70210-34-3 or 12269-87-3) and preparations based thereon with a colourant C.I. Acid Brown 58 content of 75 % or more by weight0 %-31.12.2026
0.6973ex 3204 12 0055Colourant C.I. Acid Brown 165 (CAS RN 61724-14-9) and preparations based thereon with a colourant C.I. Acid Brown 165 content of 75 % or more by weight0 %-31.12.2026
0.6974ex 3204 12 0057Colourant C.I. Acid Brown 282 (CAS RN 70236-60-1 or 12219-65-7) and preparations based thereon with a colourant C.I. Acid Brown 282 content of 75 % or more by weight0 %-31.12.2026
0.6535ex 3204 12 0060Colourant C.I. Acid Red 52 (CAS RN 3520-42-1) and preparations based thereon with a colourant C.I. Acid Red 52 content of 97 % or more by weight0 %-31.12.2024
0.6977ex 3204 12 0065Colourant C.I. Acid Brown 432 (CAS RN 119509-50-1) and preparations based thereon with a colourant C.I. Acid Brown 432 content of 75 % or more by weight0 %-31.12.2026
0.6652ex 3204 12 0070Colourant C.I. Acid blue 25 (CAS RN 6408-78-2) and preparations based thereon with a colourant C.I. Acid blue 25 content of 80 % or more by weight0 %-31.12.2025
0.4065ex 3204 13 0010Colourant C.I. Basic Red 1 (CAS RN 989-38-8) and preparations based thereon with a colourant C.I. Basic Red 1 content of 50 % or more by weight0 %-31.12.2023
0.7394ex 3204 13 0015Colourant C.I. Basic Blue 41 (CAS RN 12270-13-2) and preparations based thereon with a colourant C.I. Basic Blue 41 content of 50 % or more by weight0 %-31.12.2027
0.5804ex 3204 13 0030Colourant C.I. Basic Blue 7 (CAS RN 2390-60-5) and preparations based thereon with a colourant C.I. Basic Blue 7 content of 50 % or more by weight0 %-31.12.2023
0.7396ex 3204 13 0035Colourant C.I. Basic Yellow 28 (CAS RN 54060-92-3) and preparations based thereon with a colourant C.I. Basic Yellow 28 content of 50 % or more by weight0 %-31.12.2027
0.5805ex 3204 13 0040Colourant C.I. Basic Violet 1 (CAS RN 603-47-4 or CAS RN 8004-87-3) and preparations based thereon with a colourant C.I. Basic Violet 1 content of 90 % or more by weight0 %-31.12.2027
0.6474ex 3204 13 0050Colourant C.I Basic Violet 11 (CAS RN 2390-63-8) and preparations based thereon with a colourant C.I Basic Violet 11 content of 90 % or more by weight0 %-31.12.2024
0.7775ex 3204 13 0055Colourant C.I. Basic Violet 16 (CAS RN 6359-45-1) and preparations based thereon with a colourant C.I. Basic Violet 16 content of 60 % or more by weight0 %-31.12.2024
0.6475ex 3204 13 0060Colourant C.I Basic Red 1:1 (CAS RN 3068-39-1) and preparations based thereon with a colourant C.I Basic Red 1:1 content of 90 % or more by weight0 %-31.12.2024
0.7776ex 3204 13 0065Colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) and preparations based thereon with a colourant C.I. Basic Blue 3 (CAS RN 33203-82-6) content of 50 % or more but not more than 80 % by weight0 %-31.12.2024
0.7777ex 3204 13 0070Mixture of the colourants C.I. Basic Yellow 28 (CAS RN 54060-92-3), C.I. Basic Red 46 (CAS RN 12221-69-1) and C.I. Basic Blue 159 (CAS RN 105953-73-9) and preparations based thereon with a content of colourants C.I. Basic Yellow 28, C.I. Basic Red 46 and C.I. Basic Blue 159 taken together of 60 % or more by weight0 %-31.12.2024
0.7778ex 3204 13 0075Colourant C.I. Basic Red 18:1 (CAS RN 12271-12-4) and preparations based thereon with a content of 40 % or more by weight0 %-31.12.2024
0.7779ex 3204 13 0080Colourant C.I. Basic Yellow (CAS RN 83949-75-1) and preparations based thereon with a content of 40 % or more by weight0 %-31.12.2024
0.6569ex 3204 14 0010Colourant C.I. Direct Black 80 (CAS RN 8003-69-8) and preparations based thereon with a colourant C.I. Direct Black 80 content of 90 % or more by weight0 %-31.12.2024
0.6570ex 3204 14 0020Colourant C.I. Direct Blue 80 (CAS RN 12222-00-3) and preparations based thereon with a colourant C.I. Direct Blue 80 content of 90 % or more by weight0 %-31.12.2024
0.6571ex 3204 14 0030C.I. Colourant Direct Red 23 (CAS RN 3441-14-3) and preparations based thereon with a colourant C.I. Direct Red 23 content of 90 % or more by weight0 %-31.12.2024
0.3997ex 3204 15 0060Colourant C.I. Vat Blue 4 (CAS RN 81-77-6) and preparations based thereon with a colourant C.I. Vat Blue 4 content of 50 % or more by weight0 %-31.12.2023
0.6129ex 3204 15 0070Colourant C.I. Vat Red 1 (CAS RN 2379-74-0)0 %-31.12.2023
0.6325ex 3204 16 0030Preparations based on Colourant Reactive Black 5 (CAS RN 17095-24-8) with a content thereof of 60 % or more but not more than 75 % by weight, and including one or more of the following:

—Colourant Reactive Yellow 201 (CAS RN 27624-67-5),

—1-Naphthalenesulphonicacid,4-amino-3-[[4-[[2-(sulphooxy)ethyl]sulphonyl]phenyl]azo]-, disodium salt (CAS RN 250688-43-8), or

—3,5-diamino-4-[[4-[[2-(sulphooxy)ethyl]sulphonyl]fenyl]azo]-2-[[2-sulfo-4-[[2-(sulphooxy)ethyl]sulfonyl]phenyl]azobenzoic acid sodium salt (CAS RN 906532-68-1)
0 %-31.12.2024
0.7367ex 3204 16 0040Aqueous solution of Colourant C.I. Reactive Red 141 (CAS RN 61931-52-0)

—with a colourant C.I. Reactive Red 141 content of 13 % or more by weight, and

—containing a preservative
0 %-31.12.2027
0.2517ex 3204 17 0010Colourant C.I. Pigment Yellow 81 (CAS RN 22094-93-5) and preparations based thereon with a colourant C.I. Pigment Yellow 81 content of 50 % or more by weight0 %-31.12.2023
0.5433ex 3204 17 0015Colourant C.I. Pigment Green 7 (CAS RN 1328-53-6) and preparations based thereon with a colourant C.I. Pigment Green 7 content of 40 % or more by weight0 %-31.12.2026
0.7092ex 3204 17 0018Colourant C.I. Pigment Orange 16 (CAS RN 6505-28-8) and preparations based thereon with a colourant C.I. Pigment Orange 16 content of 90 % or more by weight0 %-31.12.2026
0.6130ex 3204 17 0019Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) and preparations based thereon with a colourant C.I. Pigment Red 48:2 content of 85 % or more by weight0 %-31.12.2023
0.5505ex 3204 17 0020Colourant C.I. Pigment Blue 15:3 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:3 content of 35 % or more by weight0 %-31.12.2026
0.6279ex 3204 17 0021Colourant C.I. Pigment Blue 15:4 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:4 content of 35 % or more by weight0 %-31.12.2024
0.5259ex 3204 17 0022Colourant C.I. Pigment Red 169 (CAS RN 12237-63-7) and preparations based thereon with a colourant C.I. Pigment Red 169 content of 50 % or more by weight0 %-31.12.2026
0.6246ex 3204 17 0023Colourant C.I. Pigment Brown 41 (CAS RN 211502-16-8 or CAS RN 68516-75-6)0 %-31.12.2024
0.6453ex 3204 17 0024Colourant C.I. Pigment Red 57:1 (CAS RN 5281-04-9) and preparations based thereon with a Colourant C.I. Pigment Red 57:1 content of 20 % or more by weight0 %-31.12.2023
0.5427ex 3204 17 0025Colourant C.I. Pigment Yellow 14 (CAS RN 5468-75-7) and preparations based thereon with a colourant C.I. Pigment Yellow 14 content of 25 % or more by weight0 %-31.12.2026
0.7261ex 3204 17 0026Colourant C.I. Pigment Orange 13 (CAS RN 3520-72-7) and preparations based thereon with a colourant C.I. Pigment Orange 13 content of 80 % or more by weight0 %-31.12.2027
0.7659ex 3204 17 0031Colourant C.I. Pigment Red 63:1 (CAS RN 6417-83-0) and preparations based thereon with a colourant C.I. Pigment Red 63:1 content of 70 % or more by weight0 %-31.12.2023
0.6603ex 3204 17 0033Colourant C.I. Pigment Blue 15:1 (CAS RN 147-14-8) and preparations based thereon with a colourant C.I. Pigment Blue 15:1 content of 35 % or more by weight0 %-31.12.2025
0.5426ex 3204 17 0035Colourant C.I. Pigment Red 202 (CAS RN 3089-17-6) and preparations based thereon with a colourant C.I. Pigment Red 202 content of 70 % or more by weight0 %-31.12.2026
0.7565ex 3204 17 0037Colourant C.I. Pigment Red 81:2 (CAS RN 75627-12-2) and preparations based thereon with a colourant C.I. Pigment Red 81:2 content of 30 % or more by weight0 %-31.12.2023
0.4630ex 3204 17 0040Colourant C.I. Pigment Yellow 120 (CAS RN 29920-31-8) and preparations based thereon with a colourant C.I. Pigment Yellow 120 content of 50 % or more by weight0 %-31.12.2024
0.6452ex 3204 17 0045Colourant C.I. Pigment Yellow 174 (CAS RN 78952-72-4), highly resinated pigment (approx. 35 % disproportionate resin), with a purity of 98 % by weight or more, in the form of extruded beads with a moisture content of not more than 1 % by weight0 %-31.12.2023
0.5832ex 3204 17 0075Colourant C.I. Pigment Orange 5 (CAS RN 3468-63-1) and preparations based thereon with a colourant C.I. Pigment Orange 5 content of 80 % or more by weight0 %-31.12.2027
0.5700ex 3204 17 0085Colourant C.I. Pigment Blue 61 (CAS RN 1324-76-1) and preparations based thereon with a colourant C.I. Pigment Blue 61 content of 35 % or more by weight0 %-31.12.2027
0.5680ex 3204 17 0088Colourant C.I. Pigment Violet 3 (CAS RN 1325-82-2 or CAS RN 101357-19-1) and preparations based thereon with a colourant C.I. Pigment Violet 3 content of 90 % or more by weight0 %-31.12.2027
0.6979ex 3204 19 0013Colourant C.I. Sulphur Black 1 (CAS RN 1326-82-5) and preparations based thereon with a colourant C.I. Sulphur Black 1 content of 75 % or more by weight0 %-31.12.2026
0.6406ex 3204 19 0014Red colourant preparation, in a form of wet paste, containing by weight:

—35 % or more but not more than 40 % of 1-[[4-(phenylazo)phenyl]azo]naphthalen-2-ol methyl derivatives (CAS RN 70879-65-1)

—not more than 3 % of 1-(phenylazo)naphthalen-2-ol (CAS RN 842-07-9)

—not more than 3 % of 1-[(2-methylphenyl)azo]naphthalen-2-ol (CAS RN 2646-17-5)

—55 % or more but not more than 65 % of water
0 %-31.12.2024
0.5100ex 3204 19 0073Colourant C.I. Solvent Blue 104 (CAS RN 116-75-6) and preparations based thereon with a colourant C.I. Solvent Blue 104 content of 97 % or more by weight0 %-31.12.2026
0.5282ex 3204 19 0077Colourant C.I. Solvent Yellow 98 (CAS RN 27870-92-4 or CAS RN 12671-74-8) and preparations based thereon with a colourant C.I. Solvent Yellow 98 content of 95 % or more by weight0 %-31.12.2026
0.5395ex 3204 20 0030Colourant C.I. Fluorescent Brightener 351 (CAS RN 27344-41-8) and preparations based thereon with a colourant C.I. Fluorescent Brightener 351 content of 90 % or more by weight0 %-31.12.2026
0.6473ex 3204 90 0010Colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) (CAS RN 68427-35-0) and preparations based thereon with a colourant C.I Solvent Yellow 172 (also known as C.I. Solvent Yellow 135) content of 90 % or more by weight0 %-31.12.2024
0.3707ex 3205 00 0010Aluminium lakes prepared from dyes for use in the manufacture of pigments for the pharmaceutical industry (1)0 %-31.12.2023
0.7658ex 3205 00 0020Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2) preparation, in a form of dry powder, containing by weight:

—16 % or more but not more than 25 % of Colourant C.I. Solvent Red 48 (CAS RN 13473-26-2)

—65 % or more but not more than 75 % of aluminium hydroxide (CAS RN 21645-51-2)
0 %-31.12.2023
0.7699ex 3205 00 0030Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1) preparation, in a form of dry powder, containing by weight:

—16 % or more but not more than 21 % of Colourant C.I. Pigment Red 174 (CAS RN 15876-58-1)

—65 % or more but not more than 69 % of aluminium hydroxide (CAS RN 21645-51-2)
0 %-31.12.2023
0.3550ex 3206 11 0010Titanium dioxide coated with isopropoxytitanium triisostearate, containing by weight 1,5 % or more but not more than 2,5 % of isopropoxytitanium triisostearate0 %-31.12.2023
0.5378ex 3206 19 0010Preparation containing by weight:

—72 % (± 2 %) of mica (CAS RN 12001-26-2), and

—28 % (± 2 %) of titanium dioxide (CAS RN 13463-67-7)
0 %-31.12.2026
0.3551ex 3206 42 0010Lithopone (CAS RN 1345-05-7)0 %-31.12.2023
0.6245ex 3206 49 7020Colourant C.I. Pigment Blue 27 (CAS RN 14038-43-8)0 %-31.12.2024
0.7390ex 3206 49 7040Colourant C.I. Pigment Blue 27 (CAS RN 25869-00-5) and preparations thereon with a colourant C.I. Pigment Blue 27 content of 85 % or more by weight0 %-31.12.2027
0.8211ex 3206 49 7050Concentrated mixture of pigments (masterbatch) in the form of pellets containing by weight:

—50 % or more but not more than 70 % of polyamide-6.6 (CAS RN 32131-17-2),

—15 % or more but not more than 20 % of iron powder (CAS RN 7439-89-6),

—5 % or more but not more than 15 % of barium sulphate (CAS RN 7727-43-7), and

—5 % or more but not more than 10 % of blue pigment, consisting of a mixture of Titanium dioxide (CAS RN 13463-67-7) and Copper(II) phtalocyanine(CAS RN 147-14-8)
0 %-31.12.2026
0.36733206 50 00Inorganic products of a kind used as luminophores0 %-31.12.2023
0.6233ex 3207 30 0020Printing paste containing

—30 % by weight or more, but not more than 50 % of silver and

—8 % by weight or more, but not more than 17 % of palladium
0 %-31.12.2024
0.2511ex 3208 20 1010Copolymer of N-vinylcaprolactam, N-vinyl-2-pyrrolidone and dimethylaminoethyl methacrylate, in the form of a solution in ethanol containing by weight 34 % or more but not more than 40 % of copolymer0 %-31.12.2023
0.4511ex 3208 20 1020Immersion topcoat solution containing by weight 0,5 % or more but not more than 15 % of acrylate-methacrylate-alkenesulphonate copolymers with fluorinated side chains, in a solution of n-butanol and/or 4-methyl-2-pentanol and/or diisoamylether0 %-31.12.2023
0.8412ex 3208 20 10

ex 3905 91 00
50

25
Copolymer of vinylcaprolactam and vinylpyrrolidone (CAS RN 51987-20-3) in the form of a solution in 2-butoxyethanol (CAS RN 111-76-2) containing by weight 45 % or more but not more than 58 % of copolymer0 %-31.12.2027
0.8137ex 3208 90 19

ex 3911 90 99
13

63
Mixture, containing by weight:

—20 % or more but not more than 40 % of a copolymer of methyl vinyl ether and monobutyl maleate (CAS RN 25119-68-0),

—7 % or more but not more than 20 % of a copolymer of methyl vinyl ether and monoethyl maleate (CAS RN 25087-06-3),

—40 % or more, but not more than 65 % of ethanol (CAS RN 64-17-5),

—1 % or more but not more than 7 % of butan-1-ol (CAS RN 71-36-3)
0 %-31.12.2025
0.3967ex 3208 90 1915Chlorinated polyolefins, in a solution0 %-31.12.2023
0.2504ex 3208 90 1940Polymer of methylsiloxane, in the form of a solution in a mixture of acetone, butanol, ethanol and isopropanol, containing by weight 5 % or more but not more than 11 % of polymer of methylsiloxane0 %-31.12.2023
0.6154ex 3208 90 19

ex 3824 99 92
45

63
Polymer consisting of a polycondensate of formaldehyde and naphthalenediol, chemically modified by reaction with an alkyne halide, dissolved in propylene glycol methyl ether acetate0 %-31.12.2023
0.6989ex 3208 90 1947Solution containing by weight:

—0.1 % or more but not more than 20 % of alkoxygroups containing siloxane polymer with alkyl or aryl substituents

—75 % or more of an organic solvent containing one or more of propyleneglycolethylether (CAS RN 1569-02-4), propylene glycol mono methylether acetate (CAS RN 108-65-6) or propyleneglycol propylether (CAS RN 1569-01-3)
0 %-31.12.2026
0.2502ex 3208 90 1950Solution containing by weight:

—(65 ± 10) % of γ-butyrolactone,

—(30 ± 10) % of polyamide resin,

—(3,5 ± 1,5) % of naphthoquinone ester derivative and

—(1,5 ± 0,5) % of arylsilicic acid
0 %-31.12.2023
0.6726ex 3208 90 1955Preparation of 5 % or more but not more than 20 % by weight of a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene and maleic anhydride, or a blend of polypropylene and a copolymer of propylene, isobutene and maleic anhydride in an organic solvent0 %-31.12.2026
0.4037ex 3208 90 1960Copolymer of hydroxystyrene with one or more of the following:

—styrene

—alkoxystyrene

—alkylacrylates

dissolved in ethyl lactate
0 %-31.12.2026
0.6005ex 3208 90 1965Silicones containing 50 % by weight or more of xylene and not more than 25 % by weight of silica, of a kind used for the manufacture of long term surgical implants0 %-31.12.2024
0.5777ex 3215 19 0020Ink:

—consisting of a polyester polymer and a dispersion of silver (CAS RN 7440-22-4) and silver chloride (CAS RN 7783-90-6) in methyl propyl ketone (CAS RN 107-87-9),

—with a total solid content by weight of 55 % or more, but not more than 57 %, and

—with a specific density of 1,40 g/cm3 or more, but not more than 1,60 g/cm3,

for use in the manufacture of electrodes (1)
0 %l31.12.2027
0.2506ex 3215 90 7010Ink formulation, for use in the manufacture of ink-jet cartridges (1)0 %-31.12.2023
0.2501ex 3215 90 7020Heat sensitive ink fixed on a plastic film0 %-31.12.2023
0.4533ex 3215 90 7030Disposable cartridge ink, containing by weight:

—1 % or more, but not more than 10 % of amorphous silicon dioxide or

—3,8 % or more of dye C.I. Solvent Black 7 in organic solvents

for use in the marking of integrated circuits (1)
0 %-31.12.2023
0.5031ex 3215 90 7040Dry ink powder with a base of hybrid resin (made from polystyrene acrylic resin and polyester resin) mixed with:

—wax

—a vinyl-based polymer and

—a colouring agent

for use in the manufacture of toner bottles for photocopiers, fax machines, printers and multifunction devices (1)
0 %-31.12.2025
0.36613301 12 10Essential oil of orange, not deterpenated0 %-31.12.2023
0.4863ex 3402 39 9010Sodium lauroyl methyl isethionate0 %-31.12.2026
0.4002ex 3402 42 0010Vinyl copolymer surface active agent based on polypropylene glycol0 %-31.12.2023
0.4277ex 3402 42 0020Surfactant containing 1,4-dimethyl-1,4-bis(2-methylpropyl)-2-butyne-1,4-diyl ether, polymerised with oxirane, methyl terminated0 %-31.12.2027
0.6285ex 3402 90 1010Surface-active mixture of methyltri-C8-C10-alkylammonium chlorides0 %-31.12.2024
0.3660ex 3402 90 1020Mixture of docusate sodium (INN) and sodium benzoate0 %-31.12.2023
0.4676ex 3402 90 1070Surface-active preparation, containing ethoxylated 2,4,7,9-tetramethyl-5-decyne-4,7-diol (CAS RN 9014-85-1)0 %-31.12.2024
0.7508ex 3501 90 9010Non edible sodium caseinate (CAS RN 9005-46-3) in the form of powder with a protein content of more than 88 % by weight for use in the production of thermoplastic granules0 %-31.12.2023
0.2498ex 3506 91 9010Adhesive based on an aqueous dispersion of a mixture of dimerised rosin and a copolymer of ethylene and vinyl acetate (EVA)0 %-31.12.2023
0.4003ex 3506 91 9030Two component microencapsulated epoxy adhesive dispersed in a solvent0 %-31.12.2023
0.4313ex 3506 91 9040Acrylic pressure sensitive adhesive with a thickness of 0,076 mm or more but not more than 0,127 mm, put up in rolls of a width of 45,7 cm or more but not more than 132 cm supplied on a release liner with an initial peel adhesion release value of not less than 15 N/25 mm (measured according to ASTM D3330)0 %-31.12.2024
0.6725ex 3506 91 9050Preparation containing by weight:

—15 % or more but not more than 60 % of styrene butadiene copolymers or styrene isoprene copolymers, and

—10 % or more but not more than 30 % of pinene polymers or pentadiene copolymers,

dissolved in:

—Methyl ethyl ketone (CAS RN 78-93-3),

—Heptane (CAS RN 142-82-5), and

—Toluene (CAS RN 108-88-3) or light aliphatic solvent naphtha (CAS RN 64742-89-8)
0 %-31.12.2023
0.6293ex 3507 90 9010Preparation of Achromobacter lyticus protease (CAS RN 123175-82-6) for use in the manufacture of human and analogue insulin products (1)0 %-31.12.2024
0.7050ex 3507 90 9030Salicylate 1-monooxygenase (CAS RN 9059-28-3) in aqueous solution with

—an enzyme concentration of 6,0 U/ml or more, but not more than 7,4 U/ml,

—a concentration by weight of sodium azide (CAS RN 26628-22-8) of not more than 0,09 % and

—a pH value of 6,5 or more, but not more than 8,5
0 %-31.12.2026
0.4922ex 3601 00 0020Pyrotechnical mixture in cylindrical shape or granulate form, composed of strontium nitrate or copper nitrate in a matrix of nitroguanidine or guanidine nitrate, also containing a binder and additives, used as a component of airbag inflators (1)0 %-31.12.2026
0.7318ex 3603 50 0010Igniters for gas generators with an overall maximum length of 20,34 mm or more but not more than 29,4 mm and a pin length of 6,68 mm (± 0,3 mm) or more but not more than 7,54 mm (± 0,3 mm)0 %-31.12.2027
0.7994ex 3801 10 0020Artificial graphite (CAS RN 7782-42-5) powder form, with:

—specific surface area (measured by BET) of 0,8 m2/g (± 0,25),

—tap density: 0,85 g/cm3 (± 0,10),

—particle size represented by d50 value of 21,0 μm (± 2,0),

—specific discharge capacity of 351,0 mAh/g (± 3,0),

—initial efficiency of 94,0 % (± 2,0)
1.8 %-31.12.2023
0.7975ex 3801 10 0030Artificial graphite in powder form, (CAS RN 7782-42-5) with:

—with or without coating on the surface,

—particle size represented by d50 value of 15 μm (± 4),

—specific surface area (measured by BET) less than 3,5 m2/g,

—tap density: 1,3 g/m3 (± 0,5),

—specific Discharge Capacity of 348 mAh/g (± 13),

—initial efficiency above 93,0 %
1.8 %-31.12.2023
0.5465ex 3801 90 0010Expandable graphite (CAS RN 90387-90-9 and CAS RN 12777-87-6)0 %-31.12.2026
0.6759ex 3802 10 0010Mixture of activated carbon and polyethylene, in form of powder0 %-31.12.2025
0.7368ex 3802 10 0040Chemically activated carbon for the absorption and desorption of vapors, in a defined or irregular shape with an effective butane capacity of 5 g butane / 100 ml or more (according to ASTM D 5228) (1)0 %-31.12.2027
0.29873805 90 10Pine oil1.7 %-31.12.2023
0.2990ex 3808 91 9010Indoxacarb (ISO) and its (R) isomer, fixed on a support of silicon dioxide0 %-31.12.2023
0.2988ex 3808 91 9030Preparation containing endospores or spores and protein crystals derived from either:

—Bacillus thuringiensis Berliner subsp. aizawai and kurstaki or,

—Bacillus thuringiensis subsp. kurstaki or,

—Bacillus thuringiensis subsp. israelensis or,

—Bacillus thuringiensis subsp. aizawai or,

—Bacillus thuringiensis subsp. tenebrionis
0 %-31.12.2024
0.2983ex 3808 91 9040Spinosad (ISO)0 %-31.12.2023
0.5710ex 3808 91 9060Spinetoram (ISO) (CAS RN 935545-74-7), preparation of two spinosyn components (3’-ethoxy-5,6-dihydro spinosyn J) and (3’-ethoxy- spinosyn L)0 %-31.12.2027
0.6874ex 3808 92 3010Mancozeb (ISO) (CAS RN 8018-01-7) imported in immediate packings of a content of 500 kg or more (2)0 %-31.12.2025
0.2986ex 3808 92 9010Fungicide in the form of a powder, containing by weight 65 % or more but not more than 75 % of hymexazole (ISO), not put up for retail sale0 %-31.12.2023
0.2984ex 3808 92 9030Preparation consisting of a suspension of pyrithione zinc (INN) in water, containing by weight:

—24 % or more but not more than 26 % of pyrithione zinc (INN), or

—39 % or more but not more than 41 % of pyrithione zinc (INN)
0 %-31.12.2023
0.4843ex 3808 92 9050Preparations based on copper pyrithione (CAS RN 14915-37-8)0 %-31.12.2024
0.4753ex 3808 93 9010Preparation, in the form of granules, containing by weight:

—38,8 % or more but not more than 41,2 % of Gibberellin A3, or

—9,5 % or more but not more than 10,5 % of Gibberellin A4 and A7
0 %-31.12.2024
0.5048ex 3808 93 9020Preparation consisting of benzyl(purin-6-yl)amine in a glycol solution, containing by weight:

—1,88 % or more but not more than 2,00 % of benzyl(purin-6-yl)amine

of a kind used in plant growth regulators
0 %-31.12.2025
0.6532ex 3808 94 2030Bromochloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 32718-18-6) containing:

—1,3-Dichloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 118-52-5),

—1,3-Dibromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 77-48-5),

—1-Bromo,3-chloro-5,5-dimethylimidazolidine-2,4-dione (CAS RN 16079-88-2), and/or

—1-Chloro,3-bromo-5,5-dimethylimidazolidine-2,4-dione (CAS RN 126-06-7)
0 %-31.12.2024
0.6000ex 3808 99 9020Abamectin (ISO) (CAS RN 71751-41-2)0 %-31.12.2023
0.2557ex 3809 91 0010Mixture of 5-ethyl-2-methyl-2-oxo-1,3,2λ 5-dioxaphosphoran-5-ylmethyl methyl methylphosphonate and bis(5-ethyl-2-methyl-2-oxo-1,3,2λ 5-dioxaphosphoran-5-ylmethyl) methylphosphonate0 %-31.12.2023
0.4406ex 3810 10 0010Soldering or welding paste, consisting of a mixture of metals and resin containing by weight:

—70 % or more, but not more than 90 % of tin

—not more than 10 % of one or more metals of silver, copper, bismuth, zinc, or indium

for use in the electro technical industry (1)
0 %-31.12.2023
0.4510ex 3811 19 0010Solution of more than 61 % but not more than 63 % by weight of methylcyclopentadienyl manganese tricarbonyl in an aromatic hydrocarbon solvent, containing by weight not more than:

—4,9 % of 1,2,4-trimethyl-benzene,

—4,9 % of naphthalene, and

—0,5 % of 1,3,5-trimethyl-benzene
0 %-31.12.2024
0.3448ex 3811 21 0010Salts of dinonylnaphthalenesulphonic acid, in the form of a solution in mineral oils0 %-31.12.2023
0.7223ex 3811 21 0011Dispersing agent and oxidation inhibitor containing :

—o-amino polyisobutylenephenol (CAS RN 78330-13-9),

—more than 30 % by weight but not more than 50 % by weight of mineral oils,

used in the manufacture of blends of additives for lubricating oils (1)
0 %-31.12.2023
0.6904ex 3811 21 0012Dispersing agent containing :

—esters of polyisobutenyl succinic acid and pentaerythritol (CAS RN 103650-95-9),

—35 % or more but not more than 55 % by weight of mineral oils, and

—with a chlorine content of not more than 0,05 % by weight,

used in the manufacture of blends of additives for lubricating oils (1)
0 %-31.12.2025
0.6018ex 3811 21 0013Additives containing :

—borated magnesium (C16-C24) alkylbenzene sulphonates and

—mineral oils,

having a total base number (TBN) of more than 250, but not more than 350, for use in the manufacture of lubricating oils (1)
0 %-31.12.2024
0.6906ex 3811 21 0014Dispersing agent :

—containing polyisobutene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 147880-09-9),

—containing 35 % or more but not more than 55 % by weight of mineral oils,

—with a chlorine content by weight of not more than 0,05 %,

—having a total base number of less than 15,

used in the manufacture of blends of additives for lubricating oils (1)
0 %-31.12.2025
0.6907ex 3811 21 0016Detergent containing :

—Calcium salt of beta-aminocarbonyl alkylphenol (reaction product Mannich base of alkylphenol)

—40 % or more but not more than 60 % by weight of mineral oils and

—having a total base number more than 120

used in the manufacture of blends of additives for lubricating oils (1)
0 %-31.12.2025
0.6905ex 3811 21 0018Detergent containing :

—long chain alkyltoluene calcium sulphonates,

—more than 30 % but not more than 50 % by weight of mineral oils, and

—having a total base number of more than 310 but not more than 340,

used in the manufacture of blends of additives for lubricating oils (1)
0 %-31.12.2025
0.6430ex 3811 21 0019Additives containing:

—a polyisobutylene succinimide based mixture, and

—more than 30 % but not more than 50 % by weight of mineral oils,

having a total base number of more than 40, for use in the manufacture of lubricating oils (1)
0 %-31.12.2024
0.3449ex 3811 21 0020Additives for lubricating oils, based on complex organic molybdenum compounds, in the form of a solution in mineral oil0 %-31.12.2023
0.8196ex 3811 21 0022Additive consisting essentially of:

—Polyisobutenyl succinic anhydride (CAS RN 192662-34-3) reaction product with N,N-diethylaminoethanol (CAS RN 100-37-8),

—25 % or more by weight, but not more than 40 % by weight of mineral oil,

used in the manufacture of blends of additives for lubricating oils (1)
0 %-31.12.2026
0.8197ex 3811 21 0024Additive consisting essentially of:

—Polyisobutenyl succinic anhydride reaction product with polyethylenepolyamines, borated (CAS RN 134758-95-5), with a chlorine content by weight of 0,05 % or more but not more than 0,25 % and a total base number (TBN) of more than 20,

—45 % and more by weight and no more than 55 % by weight of mineral oil,

used in the manufacture of blends of additives for lubricating oils (1)
0 %-31.12.2026
0.6012ex 3811 21 0025Additives containing:

—a (C8-18) alkyl polymethacrylate copolymer with N-[3-(dimethylamino)propyl]methacrylamide, of an average molecular weight (Mw) of more than 10 000 but not more than 20 000 , and

—more than 15 %, but not more than 30 % by weight of mineral oils,

for use in the manufacture of lubricating oils (1)
0 %-31.12.2024
0.8198ex 3811 21 0026Additive consisting essentially of:

—Phosphorodithioic acid, mixed O,O-bis (1,3-dimethylbutyl and isopropyl) esters, zinc salts (CAS RN 84605-29-8),

—7 % or more by weight but not more than 12 % by weight of mineral oil,

used in the manufacture of blends of additives for lubricating oils (1)
0 %-31.12.2026
0.6022ex 3811 21 0027Additives containing:

—10 % or more by weight of an ethylene-propylene copolymer chemically modified by succinic anhydride groups reacted with 3-nitroaniline, and

—mineral oils,

for use in the manufacture of lubricating oils (1)
0 %-31.12.2024
0.8199ex 3811 21 0028Additive consisting essentially of:

—Zinc bis(O,O-bis(2-ethylhexyl)) bis (dithiophosphate) (CAS RN 4259-15-8);

—triphenyl phosphite (CAS RN 101-02-0) more than 0,5 % by weight but not more than 6 % by weight,

—O,O,O-triphenyl phosphorothioate (CAS RN 597-82-0) more than 0,5 % by weight but not more than 6 % by weight, and not more than 7,5 % by weight of the combination of triphenylphosphorus compounds

—10 % or more by weight but not more than 20 % by weight of mineral oils,

used in the manufacture of blends of additives for lubricating oils (1)
0 %-31.12.2026
0.5717ex 3811 21 0030Additives for lubricating oils, containing mineral oils, consisting of calcium salts of reaction products of polyisobutylene substituted phenol with salicylic acid and formaldehyde, used as a concentrated additive for the manufacture of engine oils through a blending process0 %-31.12.2027
0.8201ex 3811 21 0032Additive consisting essentially of:

—Zinc O,O,O',O'-tetrakis (1,3-dimethylbutyl) bis(phosphorodithioate) (CAS RN 2215-35-2),

—4 % or more by weight but not more than 12 % by weight of mineral oil,

used in the manufacture of blends of additives for lubricating oils (1)
0 %-31.12.2026
0.6013ex 3811 21 0033Additives containing:

—calcium salts of heptylphenol reaction products with formaldehyde (CAS RN 84605-23-2), and

—mineral oils,

having a total base number (TBN) of more than 40 but not more than 100, for use in the manufacture of lubricating oils or overbased detergents for use in lubricating oils (1)
0 %-31.12.2024
0.6016ex 3811 21 0037Additives containing:

—a styrene-maleic anhydride copolymer esterified with C4-C20 alcohols, modified by aminopropylmorpholine, and

—more than 50 % but not more than 75 % by weight of mineral oils,

for use in the manufacture of lubricating oils (1)
0 %-31.12.2024
0.6435ex 3811 21 0048Additives containing

—overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9) and

—by weight more than 25 % but not more than 50 % of mineral oils,

having a total base number of more than 350, but not more than 450, for use in the manufacture of lubricating oils (1)
0 %-31.12.2024
0.5727ex 3811 21 0050Additives for lubricating oils,

—based on calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),

—containing mineral oils,

used as a concentrated additive for the manufacture of engine oils through a blending process
0 %-31.12.2027
0.6437ex 3811 21 0053Additives containing:

—overbased calcium petroleum sulphonates (CAS 68783-96-0) with a sulphonate content by weight of 15 % or more, but not more than 30 % and

—by weight more than 40 % but not more than 60 % of mineral oils,

having a total base number of 280 or more but not more than 420,

for use in the manufacture of lubricating oils (1)
0 %-31.12.2024
0.6434ex 3811 21 0055Additives containing:

—low base number calcium polypropylbenzenesulphonate (CAS RN 75975-85-8) and

—by weight more than 40 % but not more than 60 % of mineral oils,

having a total base number of more than 10 but not more than 25, for use in the manufacture of lubricating oils (1)
0 %-31.12.2024
0.5724ex 3811 21 0060Additives for lubricating oils, containing mineral oils,

—based on calcium polypropylenyl substituted benzenesulphonate (CAS RN 75975-85-8) with a content by weight of 25 % or more but not more than 35 %,

—with a total base number (TBN) of 280 or more but not more than 320,

used as a concentrated additive for the manufacture of engine oils through a blending process
0 %-31.12.2027
0.6431ex 3811 21 0063Additives containing:

—an overbased mixture of calcium petroleum sulphonates (CAS RN 61789-86-4) and synthetic calcium alkylbenzenesulphonates (CAS RN 68584-23-6 and CAS RN 70024-69-0) with a total sulphonate content by weight of 15 % or more, but not more than 25 % and

—by weight more than 40 % but not more than 60 % of mineral oils,

having a total base number of 280 or more but not more than 320, for use in the manufacture of lubricating oils (1)
0 %-31.12.2024
0.6429ex 3811 21 0065Additives containing:

—a polyisobutylene succinimide based mixture (CAS RN 160610-76-4), and

—more than 35 % but not more than 50 % by weight of mineral oils,

having a sulphur content of more than 0,7 % but not more than 1,3 % by weight, having a total base number of more than 8, for use in the manufacture of lubricating oils (1)
0 %-31.12.2024
0.5711ex 3811 21 0070Additives for lubricating oils,

—containing polyisobutylene succinimide derived from reaction products of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),

—containing mineral oils,

—with a chlorine content by weight of 0,05 % or more but not more than 0,25 %,

—with a total base number (TBN) of more than 20,

used as a concentrated additive for the manufacture of engine oils through a blending process
0 %-31.12.2027
0.6017ex 3811 21 0073Additives containing:

—borated succinimide compounds (CAS RN 134758-95-5),

—mineral oils, and

—having a total base number (TBN) greater than 40,

for use in the manufacture of additive mixtures for lubricating oils (1)
0 %-31.12.2023
0.6671ex 3811 21 0075Additives containing:

—Calcium (C10-C14) dialkylbenzenesulfonates,

—more than 40 %, but not more than 60 % by weight of mineral oils,

with a total base number of not more than 10, for use in the manufacture of blends of additives for lubricating oils (1)
0 %-31.12.2027
0.6669ex 3811 21 0077Antifoam additives consisting of:

—a copolymer of 2-ethylhexyl acrylate and ethyl acrylate, and

—more than 50 % but not more than 80 % by weight of mineral oils,

for use in the manufacture of additive blends for lubricating oils (1)
0 %-31.12.2027
0.6666ex 3811 21 0080Additives containing :

—polyisobutylene aromatic polyamine succinimide,

—more than 40 % but not more than 60 % by weight of mineral oils,

with a nitrogen content of more than 0,6 % but not more than 0,9 % by weight, for use in the manufacture of additive blends for lubricating oils (1)
0 %-31.12.2027
0.6498ex 3811 21 0083Additives containing:

—polyisobutene succinimide derived from reaction of polyethylenepolyamines with polyisobutenyl succinic anhydride (CAS RN 84605-20-9),

—more than 31,9 % but not more than 43,3 % by weight of mineral oils,

—not more than 0,05 % by weight chlorine, and

—having a total base number (TBN) greater than 20,

for use in the manufacture of additives blends for lubricating oils (1)
0 %-31.12.2024
0.5718ex 3811 21 0085Additives:

—containing more than 20 % but not more than 45 % by weight of mineral oils,

—based on a mixture of branched dodecylphenol sulfide calcium salts, whether or not carbonated,

for use in the manufacture of blends of additives (1)
0 %-31.12.2027
0.6438ex 3811 29 0015Additives containing :

—products from the reaction of branched heptyl phenol with formaldehyde, carbon disulphide and hydrazine (CAS RN 93925-00-9) and

—more than15 % but not more than 28 % by weight of light aromatic petroleum naphtha solvent,

for use in the manufacture of lubricating oils (1)
0 %-31.12.2024
0.7512ex 3811 29 0018Additive consisting of dihydroxy butanedioic acid - (mixed C12-16-alkyl and C13-rich C11-14-isoalkyl) diester, for use in the manufacture of engine oils (1)0 %-31.12.2023
0.5721ex 3811 29 0020Additives for lubricating oils, consisting of reaction products of bis(2-methylpentan-2-yl)dithiophosphoric acid with propylene oxide, phosphorus oxide, and amines with C12-14 alkyl chains, used as a concentrated additive for the manufacture of lubricating oils0 %-31.12.2027
0.6432ex 3811 29 0025Additives containing at least salts of primary amines and mono- and di-alkylphosphoric acids, for use in the manufacture of lubricating oils or greases (1)0 %-31.12.2024
0.5723ex 3811 29 0030Additives for lubricating oils, consisting of reaction products of butyl-cyclohex-3-enecarboxylate, sulphur and triphenyl phosphite (CAS RN 93925-37-2), used as a concentrated additive for the manufacture of engine oils through a blending process0 %-31.12.2027
0.6433ex 3811 29 0035Additives consisting of an imidazoline based mixture (CAS RN 68784-17-8), for use in the manufacture of lubricating oils (1)0 %-31.12.2024
0.5728ex 3811 29 0040Additives for lubricating oils, consisting of reaction products of 2-methyl-prop-1-ene with sulphur monochloride and sodium sulphide (CAS RN 68511-50-2), with a chlorine content by weight of 0,01 % or more but not more than 0,5 %, used as a concentrated additive for the manufacture of lubricating oils0 %-31.12.2027
0.6436ex 3811 29 0045Additives consisting of a mixture of (C7-C9) dialkyl adipates, in which diisooctyl adipate (CAS RN 1330-86-5) is more than 85 % by weight of the mixture, for use in the manufacture of lubricating oils (1)0 %-31.12.2024
0.5719ex 3811 29 0050Additives for lubricating oils, consisting of a mixture of N,N-dialkyl -2-hydroxyacetamides with alkyl chain lengths between 12 and 18 carbon atoms (CAS RN 866259-61-2), used as a concentrated additive for the manufacture of engine oils through a blending process0 %-31.12.2027
0.6020ex 3811 29 0070Additives consisting of dialkylphosphites (in which the alkyl groups contain more than 80 % by weight of oleyl, palmityl and stearyl groups), for use in the manufacture of lubricating oils (1)0 %-31.12.2024
0.7205ex 3811 29 0075Oxidation inhibitor mainly containing a mixture of isomers of 1-(tert-dodecylthio)propan-2-ol (CAS RN 67124-09-8), used in the manufacture of blends of additives for lubricating oils (1)0 % (1)-31.12.2023
0.6023ex 3811 29 0085Additives consisting of a mixture of 3-((C9-11)-isoalkyloxy)tetrahydrothiophene 1,1-dioxide, C10-rich (CAS RN 398141-87-2), for use in the manufacture of lubricating oils (1)0 %-31.12.2024
0.3730ex 3811 90 0010Dinonylnaphthylsulphonic acid salt, in a mineral oil solution0 %-31.12.2023
0.5565ex 3811 90 0040Solution of a quaternary ammonium salt based on polyisobutenyl succinimide, containing by weight 10 % or more but not more than 29,9 % of 2-ethylhexanol0 %-31.12.2027
0.7204ex 3811 90 0050Corrosion inhibitor containing:

—polyisobutenyl succinic acid and

—more than 5 % and not more than 20 % by weight of mineral oils

for use in the manufacture of blends of additives for fuels (1)
0 %-31.12.2026
0.5147ex 3812 10 0010Rubber accelerator based on diphenyl guanidine granules (CAS RN 102-06-7)0 %-31.12.2026
0.6045ex 3812 20 9010Plasticiser, containing:

—bis(2-ethylhexyl)-1,4-benzene dicarboxylate (CAS RN 6422-86-2)

—more than 10 % but not more than 60 % by weight of dibutylterephthalate (CAS RN 1962-75-0)
0 %-31.12.2023
0.3444ex 3812 39 9020Mixture containing predominantly bis(2,2,6,6-tetramethyl-1-octyloxy-4-piperidyl) sebacate0 %-31.12.2023
0.6055ex 3812 39 9025UV photo stabiliser containing:

—α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-hydroxypoly(oxy-1,2-ethanediyl) (CAS RN 104810-48-2);

—α-[3-[3-(2H-Benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropyl]-ω-[3-[3-(2H-benzotriazol-2-yl)-5-(1,1-dimethylethyl)-4-hydroxyphenyl]-1-oxopropoxy]poly (oxy-1,2-ethanediyl) (CAS RN 104810-47-1);

—polyethylene glycol of a weight average molecular weight (Mw) of 300 (CAS RN 25322-68-3)

—bis (1,2,2,6,6-pentamethyl-4-piperidyl)sebacate (CAS RN 41556-26-7), and

—methyl-1,2,2,6,6-pentamethyl-4- piperidyl sebacate (CAS RN 82919-37-7)
0 %-31.12.2023
0.3446ex 3812 39 9030Compound stabilisers containing by weight 15 % or more but not more than 40 % of sodium perchlorate and not more than 70 % of 2-(2-methoxyethoxy)ethanol0 %-31.12.2024
0.6054ex 3812 39 9035Mixture containing by weight:

—25 % or more but not more than 55 % of a mixture of C15-18 tetramethylpiperidinyl esters (CAS RN 86403-32-9)

—not more than 20 % of other organic compounds

—on a carrier of polypropylene (CAS RN 9003-07-0) or amorphous silica (CAS RN 7631-86-9 or 112926-00-8)
0 %-31.12.2023
0.4861ex 3812 39 9040Mixture of:

—80 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4), and

—20 % (± 10 %) by weight of 2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3)
0 %-31.12.2023
0.8273ex 3812 39 90452-Aminoethanol reaction products with cyclohexane and peroxidized N-butyl-2,2,6,6-tetramethyl-4-piperidinamine-2,4,6-trichloro-1,3,5-triazine reaction products (CAS RN 191743-75-6) with a purity by weight of 99 % or more0 %-31.12.2026
0.5477ex 3812 39 9055UV-stabilizer, containing:

—2-(4,6-bis(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6) and

—either N,N’-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) or

—N,N’-bis(2,2,6,6-tetramethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4- dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 82451-48-7)
0 %-31.12.2026
0.5483ex 3812 39 9065Stabiliser for plastic material containing:

—2-ethylhexyl 10-ethyl-4,4-dimethyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-35-4),

—2-ethylhexyl 10-ethyl-4-[[2-[(2-ethylhexyl)oxy]-2-oxoethyl]thio]-4-methyl-7-oxo-8-oxa-3,5-dithia-4-stannatetradecanoate (CAS RN 57583-34-3), and

—2-ethylhexyl mercaptoacetate (CAS RN 7659-86-1)
0 %-31.12.2026
0.5822ex 3812 39 9080UV-stabilizer, consisting of:

—a hindered amine: N,N'-bis(1,2,2,6,6-pentamethyl-4-piperidinyl)-1,6-hexanediamine, polymer with 2,4-dichloro-6-(4-morpholinyl)-1,3,5-triazine (CAS RN 193098-40-7) and

—either an o-hydroxyphenyl triazine UV light absorber or

—a chemically modified phenolic compound
0 %-31.12.2027
0.3441ex 3814 00 9020Mixture containing by weight:

—69 % or more but not more than 71 % of 1-methoxypropan-2-ol (CAS RN 107-98-2),

—29 % or more but not more than 31 % of 2-methoxy-1-methylethyl acetate (CAS RN 108-65-6)
0 %-31.12.2023
0.3731ex 3814 00 9040Azeotrope mixtures containing isomers of nonafluorobutyl methyl ether and/or nonafluorobutyl ethyl ether0 %-31.12.2023
0.2800ex 3815 12 0010Catalyst, in the form of granules or rings of a diameter of 3 mm or more but not more than 10 mm, consisting of silver on an aluminium oxide support and containing by weight 8 % or more but not more than 40 % of silver0 %-31.12.2023
0.7574ex 3815 12 0020Spherical catalyst consisting of a support of aluminium oxide coated with platinum, with

—a diameter of 1,4 mm or more but not more than 2,0 mm, and

—a platinum content by weight of 0,2 % or more but not more than 0,5 %
0 %-31.12.2023
0.7585ex 3815 12 0030Catalyst

—containing 0,3 gram per litre or more, but not more than 7 gram per litre of precious metals,

—deposited on a ceramic honeycomb structure coated with aluminium oxide or cerium/zirconium oxide, the honeycomb structure having:

—a nickel content of 1,26 % by weight or more, but not more than 1,29 % by weight,

—62 cells per cm2 or more, but not more than 140 cells per cm2,

—a diameter of 100 mm or more, but not more than 120 mm, and

—a length of 60 mm or more, but not more than 150 mm,

for use in the production of motor vehicles (1)
0 %-31.12.2023
0.5508ex 3815 19 9010Catalysts consisting of chromium trioxide, dichromium trioxide or organometallic compounds of chromium, fixed on a silicon dioxide support with a pore volume of 2 cm3/g or more (as determined by the nitrogen absorption method)0 %-31.12.2026
0.2799ex 3815 19 9015Catalyst, in the form of a powder, consisting of a mixture of metal oxides fixed on a support of silicon dioxide, containing by weight 20 % or more but not more than 40 % of molybdenum, bismuth and iron evaluated together, for use in the manufacture of acrylonitrile (1)0 %-31.12.2023
0.2798ex 3815 19 9020Catalyst,

—in the form of solid spheres,

—of a diameter of 4 mm or more but not more than 12 mm, and

—consisting of a mixture of molybdenum oxide and other metal oxides, supported on silicon dioxide and/or aluminium oxide,

for use in the manufacture of acrylic acid (1)
0 %-31.12.2023
0.6049ex 3815 19 9025Catalyst in the form of spheres of a diameter of 4,2 mm or more but not more than 9 mm, consisting of a mixture of metal oxides containing predominantly oxides of molybdenum, nickel, cobalt and iron, on a support of aluminium oxide, for use in the manufacture of acrylic aldehyde (1)0 %-31.12.2023
0.3435ex 3815 19 9030Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polypropylene (1)0 %-31.12.2023
0.7566ex 3815 19 9035Catalyst consisting of tungstosilicic acid hydrate (CAS RN 12027-43-9) impregnated on a support of silicon dioxide in the form of a powder0 %-31.12.2023
0.2792ex 3815 19 9065Catalyst consisting of phosphoric acid chemically bonded to a support of silicon dioxide0 %-31.12.2023
0.2791ex 3815 19 9070Catalyst consisting of organo-metallic compounds of aluminium and zirconium, fixed on a support of silicon dioxide0 %-31.12.2023
0.2790ex 3815 19 9075Catalyst consisting of organo-metallic compounds of aluminium and chromium, fixed on a support of silicon dioxide0 %-31.12.2023
0.2793ex 3815 19 9080Catalyst consisting of organo-metallic compounds of magnesium and titanium, fixed on a support of silicon dioxide, in the form of a suspension in mineral oil0 %-31.12.2023
0.2788ex 3815 19 9085Catalyst consisting of organo-metallic compounds of aluminium, magnesium and titanium, fixed on a support of silicon dioxide, in the form of powder0 %-31.12.2023
0.3899ex 3815 19 9086Catalyst containing titanium tetrachloride supported on magnesium dichloride, for use in the manufacture of polyolefins (1)0 %-31.12.2023
0.4005ex 3815 90 9016Initiator based on dimethylaminopropyl urea0 %-31.12.2027
0.7528ex 3815 90 9025Catalyst consisting by weight of:

—30 % or more but not more than 33 % of bis(4-(diphenylsulphonio)phenyl)sulphide bis(hexafluorophosphate) (CAS RN 74227-35-3), and

—24 % or more but not more than 27 % of diphenyl(4-phenylthio)phenylsuphonium hexafluorophosphate (CAS RN 68156-13-8)

in propylene carbonate (CAS RN 108-32-7)
0 %-31.12.2023
0.5062ex 3815 90 9030Catalyst, consisting of a suspension in mineral oil of:

—tetrahydrofuran complexes of magnesium chloride and titanium(III) chloride, and

—silicon dioxide,

—containing 6,6 % (± 0,6 %) by weight of magnesium, and

—containing 2,3 % (± 0,2 %) by weight of titanium
0 %-31.12.2025
0.7526ex 3815 90 9035Catalyst containing by weight:

—25 % or more but not more than 27,5 % of bis[4-(diphenylsuphonio)phenyl]sulphide bis(hexafluoroantimonate) (CAS RN 89452-37-9), and

—20 % or more but not more than 22,5 % of diphenyl(4-phenylthio)phenylsufonium hexafluoroantimonate (CAS RN 71449-78-0)

in propylene carbonate (CAS RN 108-32-7)
0 %-31.12.2023
0.7998ex 3815 90 9038Photoinitiator, containing by weight:

—80 % or more of polyethylene glycol di[β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate (CAS RN 886463-10-1),

—not more than 17 % of polyethylene glycol [β-4-[4-(2-dimethylamino-2-benzyl)butanoylphenyl]piperazine]propionate
0 %-31.12.2025
0.6006ex 3815 90 9040Catalyst:

—containing molybdenum oxide and other metal oxides in a silicon dioxide matrix,

—in the form of hollow cylindrical solids of a length of 4 mm or more but not more than 12 mm

for use in the manufacture of acrylic acid (1)
0 %-31.12.2023
0.7243ex 3815 90 9043Catalyst in powder form consisting by weight of

—92,50 % (± 2) % titanium dioxide (CAS RN 13463-67-7),

—5 % (± 1) % silicon dioxide (CAS RN 112926-00-8), and

—2,5 % (± 1,5) % sulphur trioxide (CAS RN 7446-11-9)
0 %-31.12.2027
0.7999ex 3815 90 9048Photoinitiator containing by weight:

—88 % or more of α-(2-benzoylbenzoyl)-ω-[(2-benzoylbenzoyl)oxy]-poly(oxy-1,2-ethanediyl) (CAS RN 1246194-73-9),

—not more than 12 % of α-(2-benzoylbenzoyl)-ω-hydroxy-poly(oxy-1,2-ethanediyl) (CAS RN 1648797-60-7)
0 %-31.12.2025
0.3433ex 3815 90 9050Catalyst containing titanium trichloride, in the form of a suspension in hexane or heptane containing by weight, in the hexane- or heptane-free material, 9 % or more but not more than 30 % of titanium0 %-31.12.2023
0.2783ex 3815 90 9080Catalyst consisting predominantly of dinonylnaphthalenedisulphonic acid in the form of a solution in isobutanol0 %-31.12.2025
0.3430ex 3815 90 9081Catalyst, containing by weight 69 % or more but not more than 79 % of (2-hydroxy-1-methylethyl)trimethylammonium 2-ethylhexanoate0 %-31.12.2023
0.2782ex 3815 90 9085Catalyst based on aluminosilicate (zeolite), for the alkylation of aromatic hydrocarbons, for the transalkylation of alkylaromatic hydrocarbons or for the oligomerization of olefins (1)0 %-31.12.2027
0.2909ex 3815 90 9086Catalyst, in the form of rodlets, consisting of an aluminosilicate (zeolite), containing by weight 2 % or more but not more than 3 % of rare-earth metal oxides and less than 1 % of disodium oxide0 %-31.12.2023
0.3732ex 3815 90 9088Catalyst, consisting of titanium tetrachloride and magnesium chloride, containing by weight on an oil- and hexane-free basis:

—4 % or more but not more than 10 % of titanium and

—10 % or more but not more than 20 % magnesium
0 %-31.12.2023
0.3733ex 3815 90 9089Rhodococcus rhodocrous J1 bacteria, containing enzymes, suspended in a polyacrylamide gel or in water, for use as a catalyst in the production of acrylamide by the hydration of acrylonitrile (1)0 %-31.12.2026
0.4408ex 3817 00 5010Mixture of alkylbenzenes (C14-26) containing by weight:

—35 % or more but not more than 60 % of eicosylbenzene,

—25 % or more but not more than 50 % of docosylbenzene,

—5 % or more but not more than 25 % of tetracosylbenzene
0 %-31.12.2023
0.3427ex 3817 00 8010Mixture of alkylnaphthalenes, containing by weight:

—88 % or more but not more than 98 % of hexadecylnaphthalene

—2 % or more but not more than 12 % of dihexadecylnaphthalene
0 %-31.12.2023
0.4581ex 3817 00 8020Mixture of branched alkyl benzenes mainly containing dodecyl benzenes0 %-31.12.2023
0.5479ex 3817 00 8030Mixed alkylnaphthalenes, modified with aliphatic chains, of a chain-length varying from 12 to 56 carbon atoms0 %-31.12.2026
0.4006ex 3819 00 0020Fire resistant hydraulic fluid based on phosphate ester0 %-31.12.2023
0.7922ex 3823 19 102012-Hydroxyoctadecanoic acid (CAS RN 106-14-9) for use in the manufacture of polyglycerin-poly-12-hydroxyoctadecanoic acid esters (1)0 %-31.12.2024
0.6038ex 3823 19 30

ex 3823 19 30
20

30
Palm fatty acid distillate, whether or not hydrogenated, with free fatty acid content 80 % or more for use in the manufacture of:

—industrial monocarboxylic fatty acids of heading 3823 ,

—stearic acid of heading 3823 ,

—stearic acid of heading 2915 ,

—palmitic acid of heading 2915 , or

—animal feed preparations of heading 2309  (1)
0 %-31.12.2023
0.6037ex 3823 19 90

ex 3823 19 90
20

30
Palm acid oils from refining for use in the manufacture of:

—industrial monocarboxylic fatty acids of heading 3823 ,

—stearic acid of heading 3823 ,

—stearic acid of heading 2915 ,

—palmitic acid of heading 2915 , or

—animal feed preparations of heading 2309  (1)
0 %-31.12.2023
0.2908ex 3824 99 1510Acid aluminosilicate (artificial zeolite of the Y type) in the sodium form, containing by weight not more than 11 % of sodium evaluated as sodium oxide, in the form of rodlets0 %-31.12.2023
0.8365ex 3824 99 9222Solution containing:

—30 % or more but not more than 40 % by weight of lithium hexafluorophosphate (CAS RN 21324-40-3), and

—60 % or more but not more than 70 % by weight of ethyl methyl carbonate (CAS RN 623-53-0)
3.2 %-31.12.2023
0.6810ex 3824 99 9223Butylphosphato complexes of titanium(IV) (CAS RN 109037-78-7), dissolved in ethanol and propan-2-ol0 %-31.12.2025
0.4909ex 3824 99 9229Preparation containing by weight:

—85 % or more but not more than 99 % of polyethylene glycol ether of butyl 2-cyano 3-(4-hydroxy-3-methoxyphenyl) acrylate, and

—1 % or more but not more than 15 % of polyoxyethylene (20) sorbitan trioleate
0 %-31.12.2025
0.7618ex 3824 99 9231Liquid crystal mixtures for use in the manufacture of LCD (liquid crystal display) modules (1)0 %-31.12.2023
0.4707ex 3824 99 9232Mixture of divinylbenzene-isomers and ethylvinylbenzene-isomers, containing by weight 56 % or more but not more than 85 % of divinylbenzene (CAS RN 1321-74-0)0 %-31.12.2024
0.3083ex 3824 99 92

ex 3824 99 93

ex 3824 99 96
33

40

40
Anti-corrosion preparations consisting of salts of dinonylnaphthalenesulphonic acid, either:

—on a support of mineral wax, whether or not modified chemically, or

—in the form of a solution in an organic solvent
0 %-31.12.2023
0.4153ex 3824 99 9235Preparations containing not less than 92 % or more but not more than 96,5 % by weight of 1,3:2,4-bis-O-(4-methylbenzylidene)-D-glucitol and also containing carboxylic acid derivatives and an alkyl sulphate0 %-31.12.2023
0.4523ex 3824 99 9237Mixture of acetates of 3-butene-1,2-diol with a content by weight of 65 % or more of 3-butene-1,2-diol diacetate (CAS RN 18085-02-4)0 %-31.12.2023
0.7722ex 3824 99 9238Reaction products of phosphoryl trichloride and 2-methyloxirane (CAS RN 1244733-77-4)0 %-31.12.2024
0.4152ex 3824 99 9239Preparation containing not less than 47 % by weight of 1,3:2,4-bis-O-benzylidene-D-glucitol0 %-31.12.2023
0.6779ex 3824 99 9240Solution of 2-chloro-5-(chloromethyl)-pyridine (CAS RN 70258-18-3) in organic diluent0 %-31.12.2025
0.6091ex 3824 99 9242Preparation of tetrahydro-α-(1-naphthylmethyl)furan-2-propionic acid (CAS RN 25379-26-4) in toluene0 %-31.12.2023
0.7724ex 3824 99 9243Preparation containing by weight:

—65 % or more, but not more than 95 % of isopropylated triaryl phosphate (CAS RN 68937-41-7) and

—5 % or more, but not more than 35 % of triphenyl phosphate (CAS RN 115-86-6)
0 %-31.12.2024
0.3067ex 3824 99 9245Preparation consisting predominantly of γ-butyrolactone and quaternary ammonium salts, for the manufacture of electrolytic capacitors (1)0 %-31.12.2023
0.4279ex 3824 99 9249Preparation based on 2,5,8,11-tetramethyl-6-dodecyn-5,8-diol ethoxylate (CAS RN 169117-72-0)0 %-31.12.2027
0.3065ex 3824 99 9251Mixture containing by weight 40 % or more but not more than 50 % of 2-hydroxyethyl methacrylate and 40 % or more but not more than 50 % of glycerol ester of boric acid0 %-31.12.2023
0.7742ex 3824 99 9252Electrolyte containing:

—5 % or more but not more than 20 % lithium hexafluorophosphate (CAS RN 21324-40-3) or lithium tetrafluoroborate (CAS RN 14283-07-9),

—60 % or more but not more than 90 % of a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and/or ethyl methyl carbonate (CAS RN 623-53-0),

—0,5 % or more but not more than 20 % 1,3,2-dioxathiolane 2,2-dioxide (CAS RN 1072-53-3),

for use in the manufacture of motor vehicle batteries (1)
3.2 %-31.12.2023
0.3061ex 3824 99 9253Preparations consisting predominantly of ethylene glycol and:

—either diethylene glycol, dodecanedioic acid and ammonia water,

—or N,N-dimethylformamide,

—or γ-butyrolactone,

—or silicon oxide,

—or ammonium hydrogen azelate,

—or ammonium hydrogen azelate and silicon oxide,

—or dodecanedioic acid, ammonia water and silicon oxide,

for the manufacture of electrolytic capacitors (1)
0 %-31.12.2023
0.4434ex 3824 99 9254Poly(tetramethylene glycol) bis[(9-oxo-9H-thioxanthen-1-yloxy)acetate] with an average polymer chain length of less than 5 monomer units (CAS RN 813452-37-8)0 %-31.12.2026
0.6025ex 3824 99 9255Additives for paints and coatings, containing:

—a mixture of esters of phosphoric acid obtained from the reaction of phosphoric anhydride with 4-(1,1-dimethylpropyl) phenol and copolymers of styrene-allyl alcohol (CAS RN 84605-27-6), and

—30 % or more but not more than 35 % by weight of isobutyl alcohol
0 %-31.12.2023
0.4431ex 3824 99 9256Poly(tetramethylene glycol) bis[(2-benzoyl-phenoxy)acetate] with an average polymer chain length of less than 5 monomer units0 %-31.12.2024
0.4425ex 3824 99 9257Poly(ethylene glycol) bis(p-dimethyl)aminobenzoate with an average polymer chain length of less than 5 monomer units0 %-31.12.2024
0.6067ex 3824 99 9259Potassium tert-butanolate (CAS RN 865-47-4) in the form of a solution in tetrahydrofuran0 %-31.12.2023
0.5050ex 3824 99 92613’,4’,5’-Trifluorobiphenyl-2-amine, in the form of a solution in toluene containing by weight 80 % or more but not more than 90 % of 3’,4’,5’-trifluorobiphenyl-2-amine0 %-31.12.2025
0.7831ex 3824 99 9262Solution of 9-borabicyclo[3.3.1]nonane (CAS RN 280-64-8) in tetrahydrofurane (CAS RN 109-99-9), containing by weight 6 % or more 9-borabicyclo[3.3.1]nonane0 %-31.12.2024
0.3122ex 3824 99 9265Mixture of primary tert-alkylamines0 %-31.12.2024
0.6720ex 3824 99 9268Preparation containing by weight:

—20 % (±1 %) ((3-(sec-butyl)-4-(decyloxy)phenyl)methanetriyl) Tribenzene (CAS RN 1404190-37-9)

Dissolved in:

—10 % (± 5 %) 2-sec-Butylphenol (CAS RN 89-72-5)

—64 %(±7 %) Solvent naphtha (petroleum), heavy aromatic (CAS RN 64742-94-5) and

—6 % (± 1.0 %) Naphthalene (CAS RN 91-20-3)
0 %-31.12.2025
0.6719ex 3824 99 9269Preparation containing by weight:

—80 % or more but not more than 92 % of Bisphenol-A bis(diphenyl phosphate) (CAS RN 5945-33-5)

—7 % or more but not more than 20 % oligomers of Bisphenol-A bis(diphenyl phosphate) and

—not more than 1 % triphenyl phosphate (CAS RN 115-86-6)
0 %-31.12.2026
0.4409ex 3824 99 9270Mixture of 80 % (± 10 %) of 1-[2-(2-aminobutoxy)ethoxy]but-2-ylamine and 20 % (± 10 %) of 1-({[2-(2-aminobutoxy)ethoxy]methyl} propoxy)but-2-ylamine0 %-31.12.2024
0.6198ex 3824 99 9272N-(2-Phenylethyl)-1,3-benzenedimethanamine derivatives (CAS RN 404362-22-7)0 %-31.12.2023
0.6114ex 3824 99 9276Preparation containing:

—74 % or more but not more than 90 % by weight of (S)-α-hydroxy-3-phenoxy-benzeneacetonitrile (CAS RN 61826-76-4) and

—10 % or more but not more than 26 % by weight of toluene (CAS RN 108-88-3)
0 %-31.12.2023
0.6546ex 3824 99 9282T-butylchloride dimethylsilane (CAS RN 18162-48-6) solution in toluene0 %-31.12.2024
0.3074ex 3824 99 9284Preparation consisting by weight of 83 % or more of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene), a synthetic rubber, whether or not containing by weight 7 % or more of tricyclopentadiene, and:

—either an aluminium-alkyl compound,

—or an organic complex of tungsten

—or an organic complex of molybdenum
0 %-31.12.2023
0.3069ex 3824 99 92882,4,7,9-Tetramethyldec-5-yne-4,7-diol, hydroxyethylated (CAS RN 9014-85-1)0 %-31.12.2025
0.8083ex 3824 99 9292Solution consisting of:

—50 (± 2) % by weight sodium mentholate (CAS RN 19321-38-1), and

—50 (± 2) % by weight light aliphatic solvent naphtha (peroleum) (CAS RN 64742-89-8)
0 %-31.12.2025
0.8121ex 3824 99 9293Solution of not more than 15 % by weight of lithium hexafluorophosphate (CAS RN 21324-40-3) in a mixture of ethylene carbonate (CAS RN 96-49-1), dimethyl carbonate (CAS RN 616-38-6) and ethyl methyl carbonate (CAS RN 623-53-0), contains organic carbonate derivatives as additives3.2 %-31.12.2023
0.8278ex 3824 99 9294({[2-(trifluoromethyl)phenyl]carbonyl}amino)methyl acetate (CAS RN 895525-72-1) with a content of at least 45 % by weight dissolved in N,N-dimethylacetamide (CAS RN 127-19-5)0 %-31.12.2026
0.8287ex 3824 99 9295Solution of methyl cis-1-{[(2,5-dimethylphenyl)acetyl]amino}-4-methoxycyclohexanecarboxylate (CAS RN 203313-47-7) in N,N-dimethylacetamide (CAS RN 127-19-5), containing by weight 25 % or more but not more than 45 % of the carboxylate0 %-31.12.2026
0.5961ex 3824 99 9330Powder Mixture containing by weight:

—85 % or more of zinc diacrylate (CAS RN 14643-87-9),

—not more than 5 % of 2,6-di-tert-butyl-alpha-dimethylamino-p-cresol (CAS RN 88-27-7), and

—not more than 10 % of zinc stearate (CAS RN 557-05-1)
0 %-31.12.2024
0.4719ex 3824 99 9335Paraffin with a level of chlorination of 70 % or more (CAS RN 63449-39-8)0 %-31.12.2024
0.4527ex 3824 99 9342Mixture of bis{4-(3-(3-phenoxycarbonylamino)tolyl)ureido}phenylsulphone, diphenyltoluene-2,4-dicarbamate and 1-[4-(4-aminobenzenesulphonyl)-phenyl]-3-(3-phenoxycarbonylamino-tolyl)-urea0 %-31.12.2023
0.7153ex 3824 99 9345Sodium hydrogen 3-aminonaphthalene-1,5-disulphonate (CAS RN 4681-22-5) containing by weight:

—not more than 20 % of disodium sulphate, and

—not more than 10 % of sodium chloride
0 %-31.12.2026
0.7786ex 3824 99 9348Nonhalogenated flame retardant containing by weight:

—50 % or more, but not more than 65 % of piperazine pyrophosphate (CAS RN 66034-17-1),

—35 % or more, but not more than 45 % of a phosphoric acid derivative and

—not more than 6 % of zinc oxide (CAS RN 1314-13-2)
0 %-31.12.2024
0.8062ex 3824 99 9351Tris(hydroxymethyl)phosphine oxide (CAS RN 1067-12-5) with a purity by weight of 85 % or more0 %-31.12.2025
0.6215ex 3824 99 9353Zinc dimethacrylate (CAS RN 13189-00-9), containing not more than 2,5 % by weight of 2,6-di-tert-butyl-alpha-dimethyl amino-p-cresol (CAS RN 88-27-7), in the form of powder0 %-31.12.2023
0.7497ex 3824 99 9360Mixture of phytosterols containing by weight:

—35 % or more but not more than 88 % sitosterols,

—20 % or more but not more than 63 % campesterols,

—14 % or more but not more than 38 % stigmasterols,

—not more than 13 % brassicasterols,

—not more than 10 % other stanols, and

—not more than 10 % other sterols
0 %-31.12.2023
0.4290ex 3824 99 9363Mixture of phytosterols, not in the form of powder, containing by weight:

—75 % or more of sterols,

—not more than 25 % of stanols,

for use in the manufacture of stanols/sterols or stanol/sterol esters (1)
0 %-31.12.2027
0.7460ex 3824 99 9365Reaction mass of 1,1'-(isopropylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)benzene] (CAS RN 97416-84-7) and 1,3-dibromo-2-(2,3-dibromo-2-methylpropoxy)-5-{2-[3,5-dibromo-4-(2,3,3-tribromo-2-methylpropoxy)phenyl]propan-2-yl}benzene0 %-31.12.2023
0.3117ex 3824 99 9370Oligomeric reaction product, consisting of bis(4-hydroxyphenyl) sulfone and 1,1’-oxybis(2-chloroethane)0 %-31.12.2024
0.8366ex 3824 99 9372Reaction product of octadecanoic acid methyl ester, with 1-(2-hydroxy-2-methylpropoxy)-2,2,6,6-tetramethyl-4-piperidinol (CAS RN 300711-92-6)0 %-31.12.2027
0.8371ex 3824 99 93741,3-Propanediamine, N1,N1'-1,2-ethanediylbis-, reaction products with cyclohexane and peroxidized N-butyl-2,2,6,6-tetramethyl-4-piperidinamine-2,4,6-trichloro-1,3,5-triazine reaction products (CAS RN 191680-81-6)0 %-31.12.2027
0.3112ex 3824 99 9375Mixture of phytosterols, in the form of flakes and balls, containing by weight 80 % or more of sterols and not more than 4 % of stanols0 %-31.12.2024
0.5817ex 3824 99 93

ex 3824 99 96
83

85
Preparation containing:

—C,C'-azodi(formamide) (CAS RN 123-77-3),

—magnesium oxide (CAS RN 1309-48-4) and

—zinc bis(p-toluene sulphinate) (CAS RN 24345-02-6)

in which the gas formation from C,C'-azodi(formamide) occurs at 135 °C
0 %-31.12.2023
0.3049ex 3824 99 93

ex 3824 99 96
85

57
Particles of silicon dioxide on which are covalently bonded organic compounds, for use in the manufacture of high performance liquid chromatography columns (HPLC) and sample preparation cartridges (1)0 %-31.12.2023
0.4336ex 3824 99 9388Mixture of phytosterols containing by weight:

—60 % or more, but not more than 80 % of sitosterols,

—less than 15 % of campesterols,

—less than 5 % of stigmasterols, and

—less than 15 % of betasitostanols
0 %-31.12.2027
0.7420ex 3824 99 9630Rare-earth concentrate containing by weight:

—20 % or more but not more than 30 % of cerium oxide (CAS RN 1306-38-3),

—2 % or more but not more than 10 % of lanthanum oxide (CAS RN 1312-81-8),

—10 % or more but not more than 15 % of yttrium oxide (CAS RN 1314-36-9), and

—not more than 65 % of zirconium oxide (CAS RN 1314-23-4) including natural occurring hafnium oxide
0 %-31.12.2024
0.3078ex 3824 99 9635Calcined bauxite (refractory grade)0 %-31.12.2023
0.4542ex 3824 99 9637Structured silica alumina phosphate0 %-31.12.2024
0.7313ex 3824 99 9645Lithium nickel cobalt aluminium oxide powder (CAS RN 177997-13-6) with:

—a particle size of less than 10 μm,

—a purity by weight of more than 98 %
3.2 %-31.12.2023
0.6628ex 3824 99 9646Manganese zinc ferrite granulate, containing by weight:

—52 % or more but not more than 76 % of iron(III)oxide,

—13 % or more but not more than 42 % of manganese oxide, and

—2 % or more but not more than 22 % of zinc oxide
0 %-31.12.2025
0.3064ex 3824 99 9647Mixed metals oxides, in the form of powder, containing by weight:

—either 5 % or more of barium, neodymium or magnesium and 15 % or more of titanium,

—or 30 % or more of lead and 5 % or more of niobium,

for use in the manufacture of dielectric films or for use as dielectric materials in the manufacture of multilayer ceramic capacitors (1)
0 %-31.12.2023
0.6749ex 3824 99 9648Zirconium oxide (ZrO2), calcium oxide stabilised (CAS RN 68937-53-1) with a zirconium oxide content by weight of 92 % or more but not more than 97 %0 %-31.12.2025
0.5607ex 3824 99 9650Nickel hydroxide, doped with 12 % or more but not more than 18 % by weight of zinc hydroxide and cobalt hydroxide, of a kind used to produce positive electrodes for accumulators0 %-31.12.2027
0.6145ex 3824 99 9655Carrier in powder form, consisting of:

—ferrite (Iron oxide) (CAS RN 1309-37-1)

—manganese oxide (CAS RN 1344-43-0)

—magnesium oxide (CAS RN 1309-48-4)

—styrene acrylate copolymer

to be mixed with the toner powder, in the manufacturing of ink/toner filled bottles or cartridges for facsimile machines, computer printers and copiers (1)
0 %-31.12.2023
0.5141ex 3824 99 9660Fused magnesia containing by weight 15 % or more of dichromium trioxide0 %-31.12.2026
0.3050ex 3824 99 9665Aluminium sodium silicate, in the form of spheres of a diameter of:

—either 1,6 mm or more but not more than 3,4 mm,

—or 4 mm or more but not more than 6 mm
0 %-31.12.2023
0.8122ex 3824 99 9668Lithium nickel dioxide (CAS RN 12325-84-7) containing by weight:

—less than 5 % of lithium hydroxide (CAS RN 1310-65-2),

—less than 5 % of lithium carbonate (CAS RN 554-13-2), and

—less than 15 % of nickel oxide (CAS RN 11099-02-8)
3.2 %-31.12.2023
0.3119ex 3824 99 9673Reaction product, containing by weight:

—1 % or more but not more than 40 % of molybdenum oxide,

—10 % or more but not more than 50 % of nickel oxide,

—30 % or more but not more than 70 % of tungsten oxide
0 %-31.12.2024
0.7010ex 3824 99 9674Mixture with a non-stoichiometric composition:

—with a crystalline structure,

—with a content of fused magnesia-alumina spinel and with admixtures of silicate phases and aluminates, at least 75 % by weight of which consists of fractions with a grain size of 1-3 mm and at most 25 % consists of fractions with a grain size of 0-1 mm
0 %-31.12.2026
0.7147ex 3824 99 9680Mixture consisting of:

—64 % or more, but not more than 74 % by weight of amorphous silica (CAS RN 7631-86-9)

—25 % or more, but not more than 35 % by weight of butanone (CAS RN 78-93-3) and

—not more than 1 % by weight of 3-(2,3-epoxypropoxy)propyltrimethoxysilane (CAS RN 2530-83-8)
0 %-31.12.2026
0.7553ex 3824 99 9683Cubic Boron nitride (CAS RN 10043-11-5) coated with nickel and/or nickelphosphide (CAS RN 12035-64-2)0 %-31.12.2023
0.5820ex 3824 99 9687Platinum oxide (CAS RN 12035-82-4) fixed on a porous support of aluminium oxide (CAS RN 1344-28-1), containing by weight:

—0,1 % or more but not more than 1 % of platinum, and

—0,5 % or more but not more than 5 % of ethylaluminium dichloride (CAS RN 563-43-9)
0 %-31.12.2027
0.5939ex 3826 00 10

ex 3826 00 10
20

29
Mixture of fatty acid methyl esters containing by weight at least:

—65 % or more but not more than 75 % of C12 FAME,

—21 % or more but not more than 28 % of C14 FAME,

—4 % or more but not more than 8 % of C16 FAME,

for use in the manufacture of detergents and home and personal care products (1)
0 %-31.12.2023
0.5941ex 3826 00 10

ex 3826 00 10
50

59
Mixture of fatty acid methyl esters containing by weight at least:

—50 % or more but not more than 58 % of C8-FAME

—35 % or more but not more than 50 % of C10-FAME

for the manufacturing of high purity C8 or C10 fatty acid or fatty acid mixtures thereof or of high purity methylester of C8 or C10 fatty acid (1)
0 %-31.12.2023
0.7756ex 3827 68 0005Mixture of halogenated derivatives containing by weight:

—30 % or more but not more than 60 % of difluoromethane (CAS RN 75-10-5),

—30 % or more but not more than 60 % of trifluoroiodomethane (CAS RN 2314-97-8),

—10 % or more but not more than 30 % of pentafluoroethane (CAS RN 354-33-6)
0 %-31.12.2024
0.6132ex 3901 10 10

ex 3901 40 00
20

10
High flow linear low density polyethylene-1-butene / LLDPE (CAS RN 25087-34-7) in form of powder, with

—a melt flow rate (MFR 190 °C/2,16 kg) of 16g/10min or more, but not more than 24 g/10 min and

—a density (ASTM D 1505 ) of 0,922 g/cm3 or more, but not more than 0,926 g/cm3 and

—a vicat softening temperature of min. 94 °C
0 %m331.12.2024
0.8378ex 3901 10 10

ex 3901 40 00
50

50
Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with:

—a density (ASTM D 1505 ) of 0,924 g/cm3 or more but not more than 0,928 g/cm3,

—a melt flow rate (190 °C/2,16 kg) of 48 g/10 min or more but not more than 52 g/10 min, and

—a peak melting temperature of 120 °C or more but not more than 124 C
0 %-31.12.2027
0.8379ex 3901 10 10

ex 3901 40 00
60

60
Copolymer of ethylene and 1-butene (CAS RN 25087-34-7) with:

—a density (ASTM D 1505 ) of 0,922 g/cm3 or more but not more than 0,926 g/cm3 and

—a melt flow rate (190 °C/2,16 kg) of 18 g/10 min or more but not more than 22 g/10 min
0 %-31.12.2023
0.5142ex 3901 10 9030Polyethylene granules, containing by weight 10 % or more but not more than 25 % of copper0 %-31.12.2026
0.6897ex 3901 40 0030Octene linear low-density polyethylene (LLDPE) produced by a Ziegler-Natta catalyst method in the form of pellets with:

—more than 10 % but not more than 20 % by weight of copolymer,

—a melt flow rate (MFR 190 °C/2,16 kg) of 0,7 g/10 min or more but not more than 0,9 g/10 min, and

—a density (ASTM D4703) of 0,911 g/cm3 or more, but not more than 0,913 g/cm3,

for use in the co-extrusion processing of films for flexible food packaging (1)
0 %m331.12.2025
0.6920ex 3901 90 8053Copolymer of ethylene and acrylic acid (CAS RN 9010-77-9) with:

—an acrylic acid content of 18,5 % or more, but not more than 49,5 % by weight (ASTM D4094), and

—a melt flow rate of 10g/10 min or more (125 °C/2,16 kg, ASTM D1238)
0 %m331.12.2025
0.6734ex 3901 90 8055Zinc or sodium salt of an ethylene and acrylic acid copolymer, with:

—an acrylic acid content of 6 % or more but not more than 50 % by weight, and

—a melt flow rate of 1g/10 min or more at 190 °C/2,16 kg (measured using ASTM D1238)
0 %-31.12.2025
0.5049ex 3901 90 8067Copolymer made exclusively from ethylene and methacrylic acid monomers in which the methacrylic acid content is 11 % by weight or more0 %-31.12.2025
0.6998ex 3901 90 8073Mixture containing by weight

—80 % or more, but not more than 94 % of chlorinated polyethylene (CAS RN 64754-90-1) and

—6 % or more, but not more than 20 % of styrene-acrylic copolymer (CAS RN 27136-15-8)
0 %-31.12.2026
0.2902ex 3901 90 8091Ionomer resin consisting of a salt of a copolymer of ethylene with methacrylic acid0 %-31.12.2023
0.3906ex 3901 90 8092Chlorosulphonated polyethylene0 %-31.12.2023
0.2899ex 3901 90 8093Copolymer of ethylene, vinyl acetate and carbon monoxide, for use as a plasticiser in the manufacture of roof sheets (1)0 %-31.12.2023
0.3186ex 3901 90 8094Mixtures of A-B block copolymer of polystyrene and ethylene-butylene copolymer and A-B-A block copolymer of polystyrene, ethylene-butylene copolymer and polystyrene, containing by weight not more than 35 % of styrene0 %-31.12.2023
0.2898ex 3901 90 8097Chlorinated polyethylene, in the form of powder0 %-31.12.2023
0.2895ex 3902 10 0020Polypropylene, containing no plasticiser,

—of a melting point of more than 150 °C (as determined by the ASTM D 3417 method),

—of a heat of fusion of 15 J/g or more but not more than 70 J/g,

—of an elongation at break of 1 000  % or more (as determined by the ASTM D 638 method),

—of a tensile modulus of 69 MPa or more but not more than 379 MPa (as determined by the ASTM D 638 method)
0 %-31.12.2023
0.4591ex 3902 10 0040Polypropylene, containing no plasticiser:

—of a tensile strength: of 32-77 MPa (as determined by the ASTM D638 method);

—of a flexural strength of 50-105 MPa (as determined by the ASTM D790 method);

—of a Melt Flow Rate (MFR) at 230 °C/ 2,16 kg of 5-15 g/10 min (as determined by the ASTM D1238 method);

—with 40 % or more but not more than 80 % by weight of polypropylene,

—with 10 % or more but not more than 30 % by weight of glass fibre,

—with 10 % or more but not more than 30 % by weight of mica
0 %-31.12.2024
0.3180ex 3902 20 0010Polyisobutylene, of a number average molecular weight (Mn) of 700 or more but not more than 8000 %-31.12.2023
0.3179ex 3902 20 0020Hydrogenated polyisobutene, in liquid form0 %-31.12.2023
0.8125ex 3902 30 0020Hydrogenated block copolymer of styrene and isoprene (CAS RN 68648-89-5), containing by weight less than 37 % of styrene0 %-31.12.2025
0.8232ex 3902 30 0030Hydrogenated copolymer of styrene, isoprene and butadiene, containing by weight 28 % or more, but not more than 55 % of propylene0 %-31.12.2026
0.3181ex 3902 30 0091A-B Block copolymer of polystyrene and an ethylene-propylene copolymer, containing by weight 40 % or less of styrene, in one of the forms mentioned in note 6 (b) to Chapter 390 %-31.12.2023
0.5143ex 3902 30 0095A-B-A block copolymer, consisting of:

—a copolymer of propylene and ethylene and

—21 % (± 3 %) by weight of polystyrene
0 %-31.12.2026
0.5138ex 3902 30 0097Liquid ethylene-propylene-copolymer with:

—a flashpoint of 250 °C or more,

—a viscosity index of 150 or more,

—of a number average molecular weight (Mn) of 650 or more
0 %-31.12.2026
0.4424ex 3902 90 9052Amorphous poly-alpha-olefin copolymer blend of poly(propylene-co-1-butene) and petroleum hydrocarbon resin0 %-31.12.2023
0.4509ex 3902 90 9055Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene0 %-31.12.2023
0.4768ex 3902 90 9060Non-hydrogenated 100 % aliphatic resin (polymer), with the following characteristics:

—liquid at room temperature

—obtained by cationic polymerisation of C-5 alkenes monomers

—with a number average molecular weight (Mn) of 370 (± 50)

—with a weight average molecular weight (Mw) of 500 (± 100)
0 %-31.12.2024
0.7950ex 3902 90 9065Brominated butadiene-styrene copolymer (CAS RN 1195978-93-8) with a bromine content of 60 % by weight or more but not more than 68 %, in forms as defined in Note 6 (b) to Chapter 390 %-31.12.2025
0.4040ex 3902 90 9070Synthetic poly-alpha-olefin with a viscosity of 3 or more but not more than 9 centistokes (measured at 100 °Celsius according to the ASTM D 445 method), obtained by polymerization of dodecene with or without:

—not more than 40 % by weight of tetradecene and/or

—not more than 2 % by weight decene and/or

—not more than 2 % by weight of hexadecene
0 %-31.12.2026
0.6422ex 3902 90 90

ex 3911 90 99
75

28
Polycarboxylate sodium salt of 2,5-furandione and 2,4,4-trimethylpentene in powder form0 %-31.12.2024
0.2900ex 3902 90 9092Polymers of 4-methylpent-1-ene0 %-31.12.2023
0.6214ex 3902 90 9094Chlorinated polyolefins, whether or not in a solution or dispersion0 %-31.12.2023
0.4166ex 3903 19 0040Crystalline polystyrene with:

—a melting point of 268 °C or more but not more than 272 °C

—a setting point of 232 °C or more but not more than 247 °C,

—whether or not containing additives and filling material
0 %-31.12.2026
0.5175ex 3903 90 9015Copolymer in the form of granules containing by weight:

—78 (± 4 %) of styrene,

—9 (± 2 %) of n-butyl acrylate,

—11 (± 3 %) of n-butyl methacrylate,

—1.5 (± 0,7 %) of methacrylic acid and

—0,01 % or more but not more than 2,5 % of polyolefinic wax
0 %-31.12.2023
0.5176ex 3903 90 9020Copolymer in the form of granules containing by weight:

—83 ± 3 % styrene,

—7 ± 2 % n-butyl acrylate,

—9 ± 2 % n-butyl methacrylate and

—0,01 % or more but not more than 1 % of polyolefinic wax
0 %-31.12.2026
0.7861ex 3903 90 9033Copolymer of styrene, divinylbenzene and chloromethylstyrene (CAS RN 55844-94-5) with a purity by weight of 99 % or more0 %-31.12.2024
0.2891ex 3903 90 90

ex 3911 90 99
35

43
Copolymer of α-methylstyrene and styrene, having a softening point of more than 113 C0 %-31.12.2023
0.7417ex 3903 90 90

ex 3904 69 80
38

88
Polytetrafluoroethylene (CAS RN 9002-84-0) encapsulated with an acrylonitrile-styrene copolymer (CAS RN 9003-54-7), with a content by weight of each polymer of 50 % (± 1 %)0 %-31.12.2027
0.8415ex 3903 90 9043Mixture of polymers consisting by weight of:

—10 % or more but not more than 30 % of a styrene-ethylene-butylene-styrene block copolymer (CAS RN 66070-58-4),

—25 % or more but not more than 45 % of mineral oil (CAS RN 8042-47-5),

—25 % or more but not more than 45 % of calcium carbonate (CAS RN 1317-65-3),

—10 % or more but not more than 20 % of polypropylene (CAS RN 9003-07-0), and

—1 % or more but not more than 3 % of a copolymer of α-methylstyrene and vinyltoluene (CAS RN 9017-27-0)
0 %-31.12.2027
0.6565ex 3903 90 9045Preparation, in form of powder, containing by weight:

—86 % or more but not more than 90 % of styrene-acrylic-copolymer and

—9 % or more but not more than 11 % of fatty acid ethoxylate (CAS RN 9004-81-3)
0 %m331.12.2024
0.5473ex 3903 90 90

ex 3911 90 99
60

60
Copolymer of styrene with maleic anhydride, either partially esterified or completely chemically modified, of an average molecular weight (Mn) of not more than 4500, in flake or powder form0 %-31.12.2026
0.6736ex 3903 90 9065Copolymer of styrene with 2, 5-furandione and (1-methylethyl)benzene in the form of flakes or powder (CAS RN 26762-29-8)0 %-31.12.2025
0.6804ex 3903 90 9070Copolymer in the form of granules containing by weight:

—75 % (± 7 %) styrene and

—25 % (± 7 %) methylmethacrylate
0 %m331.12.2025
0.3910ex 3903 90 9080Granules of copolymer of styrene and divinylbenzene of a minimum diameter of 150 μm and a maximum diameter of 800 μm and containing by weight:

—minimum 65 % styrene,

—maximum 25 % divinylbenzene

for use in the manufacture of ion exchange resins (1)
0 %-31.12.2023
0.4410ex 3903 90 9086Mixture containing by weight:

—45 % or more but not more than 65 % of polymers of styrene

—35 % or more but not more than 45 % of poly(phenylene ether)

—not more than 10 % of other additives

and with one or more of the following special colour effects:

—metallic or pearlescent with a visual angular metamerism caused by at least 0,3 % flake-based pigment

—fluorescent, as characterized by emitting light during absorption of ultraviolet radiation

—bright white, as characterized by L* not less than 92 and b* not more than 2 and a* between -5 and 7 on the CIELab colour scale
0 %-31.12.2023
0.2887ex 3904 30 00

ex 3904 40 00
30

91
Copolymer of vinyl chloride with vinyl acetate and vinyl alcohol, containing by weight:

—87 % or more but not more than 92 % of vinyl chloride,

—2 % or more but not more than 9 % of vinyl acetate and

—1 % or more but not more than 8 % of vinyl alcohol,

in one of the forms mentioned in note 6 (a) or (b) to Chapter 39, for the manufacture of goods of headings 3215 or 8523 or for use in the manufacture of coatings for containers and closures of a kind used for preserving food and drink (1)
0 %-31.12.2023
0.2885ex 3904 61 0020Copolymer of tetrafluoroethylene and trifluoro(heptafluoropropoxy)ethylene, containing 3,2 % or more but not more than 4,6 % by weight of trifluoro(heptafluoropropoxy)ethylene and less than 1 mg/kg of extractable fluoride ions0 %-31.12.2023
0.7675ex 3904 69 8020Copolymer of tetrafluoroethylene, heptafluoro-1-pentene and ethene (CAS RN 94228-79-2)0 %-31.12.2023
0.7626ex 3904 69 8030Copolymer of tetrafluoroethylene, hexafluoropropene and ethene0 %-31.12.2023
0.4981ex 3904 69 8081Poly(vinylidene fluoride) (CAS RN 24937-79-9)0 %-31.12.2025
0.5560ex 3904 69 8085Copolymer of ethylene and chlorotrifluoroethylene, whether or not modified with hexafluoroisobutylene, whether or not containing fillers0 %-31.12.2027
0.3285ex 3904 69 8094Copolymer of ethylene and tetrafluoroethylene0 %-31.12.2023
0.2883ex 3904 69 8096Polychlorotrifluoroethylene, in one of the forms mentioned in note 6 (a) and (b) to Chapter 390 %-31.12.2023
0.3745ex 3904 69 8097Copolymer of chlorotrifluoroethylene and vinylidene difluoride0 %-31.12.2024
0.8414ex 3905 91 0035Aqueous solution of a copolymer of vinylpyrrolidone and N,N-dimethylaminopropyl methacrylamide sulfate (CAS RN 175893-71-7), containing by weight 8 % or more, but not more than 12 % of copolymer0 %-31.12.2027
0.5774ex 3905 91 0040Water soluble copolymer of ethylene and vinyl alcohol (CAS RN 26221-27-2), containing by weight not more than 38 % of the monomer unit ethylene0 %-31.12.2027
0.8126ex 3905 91 0050Aqueous solution consisting by weight of:

—10 % or more but not more than 20 % of a copolymer of vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3 (methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 306769-73-3),

—not more than 1 % preservatives
0 %-31.12.2025
0.8145ex 3905 91 0060Copolymer of vinylpyrrolidone, vinyl caprolactam and dimethylaminoethyl methacrylate (CAS RN 102972-64-5) in solid form, or as an aqueous solution containing by weight:

—27 % or more but not more than 33 % of copolymer,

—not more than 1,5 % of ethanol (CAS RN 64-17-5),

—not more than 1 % of preservatives
0 %-31.12.2025
0.8138ex 3905 91 0070Aqueous solution, containing by weight:

—25 % or more but not more than 35 % of a copolymer of vinyl caprolactam, vinyl pyrrolidone, N,N-dimethylaminopropyl methacrylamide and 3-(methacryloylamino)propyllauryldimethylammonium chloride (CAS RN 748809-45-2),

—10 % or more but not more than 16 % of ethanol (CAS RN 64-17-5) whether or not denatured with tert-butyl alcohol (CAS RN 75-65-0) and/or denatonium benzoate (CAS RN 3734-33-6)
0 %-31.12.2025
0.8139ex 3905 91 0080Copolymer of vinylpyrrolidone, acrylic acid and dodecyl methacrylate (CAS RN 83120-95-0)0 %-31.12.2025
0.3283ex 3905 99 9095Hexadecylated or eicosylated polyvinylpyrrolidone0 %-31.12.2023
0.2880ex 3905 99 9096Polymer of vinyl formal, in one of the forms mentioned in note 6 (b) to Chapter 39, of a weight average molecular weight (Mw) of 25 000 or more but not more than 150 000 and containing by weight:

—9,5 % or more but not more than 13 % of acetyl groups evaluated as vinyl acetate and

—5 % or more but not more than 6,5 % of hydroxy groups evaluated as vinyl alcohol
0 %-31.12.2023
0.3282ex 3905 99 9097Povidone (INN)-iodine (CAS RN 25655-41-8)0 %-31.12.2023
0.3278ex 3905 99 9098Poly(vinyl pyrrolidone) partially substituted by triacontyl groups, containing by weight 78 % or more but not more than 82 % of triacontyl groups0 %-31.12.2023
0.32763906 90 60Copolymer of methyl acrylate with ethylene and a monomer containing a non-terminal carboxy group as a substituent, containing by weight 50 % or more of methyl acrylate, whether or not mixed with silicon dioxide0 %-31.12.2023
0.3279ex 3906 90 9010Polymerization product of acrylic acid with small quantities of a polyunsaturated monomer, for the manufacture of medicaments of heading 3003 or 3004  (1)0 %-31.12.2023
0.7347ex 3906 90 9023Copolymer of methylmethacrylate, butylacrylate, glycidylmethacrylate and styrene (CAS RN 37953-21-2), with an epoxy equivalent weight of not more than 500, in form of ground flakes with a particle size of not more than 1 cm0 %-31.12.2027
0.6672ex 3906 90 9033Core shell copolymer of butyl acrylate and alkyl methacrylate, with a particle size of 5 μm or more but not more than 10 μm0 %-31.12.2025
0.6663ex 3906 90 9037Copolymer of trimethylolpropane trimethacrylate and methyl methacrylate (CAS RN 28931-67-1), in microsphere form with an average diameter of 3 μm0 %-31.12.2025
0.4667ex 3906 90 9041Poly(alkyl acrylate) with an ester alkyl chain of C10 to C300 %-31.12.2024
0.7125ex 3906 90 9043Copolymer of methacrylic esters, butylacrylate and cyclic dimethylsiloxanes (CAS RN 143106-82-5)0 %-31.12.2026
0.2886ex 3906 90 9050Polymers of esters of acrylic acid with one or more of the following monomers in the chain:

—chloromethyl vinyl ether,

—chloroethyl vinyl ether,

—chloromethylstyrene,

—vinyl chloroacetate,

—methacrylic acid,

—butenedioic acid monobutyl ester,

—butenedioic acid monocyclohexyl ester,

containing by weight not more than 5 % of each monomer unit
0 %-31.12.2023
0.7499ex 3906 90 9060Aqueous dispersion containing by weight:

—more than 10 % but not more than 15 % of ethanol, and

—more than 7 % but not more than 11 % of a reaction product of poly(epoxyalkylmethacrylate-co-divinylbenzene) with a glycerol derivative
0 %-31.12.2023
0.6425ex 3906 90 9073Preparation containing by weight:

—33 % or more but not more than 37 % of butyl methacrylate - methacrylic acid copolymer,

—24 % or more but not more than 28 % of propylene glycol, and

—37 % or more but not more than 41 % of water
0 %-31.12.2024
0.6891ex 3907 10 0020Polyoxymethylene with acetyl endcaps, containing polydimethylsiloxane and fibers of a copolymer of terephthalic acid and 1,4-phenyldiamine0 %-31.12.2024
0.3272ex 3907 29 1110Poly(ethylene oxide) of a number average molecular weight (Mn) of 100 000 or more0 %-31.12.2023
0.4378ex 3907 29 1120Bis[Methoxypoly[ethyleneglycol)]-maleimidopropionamide, chemically modified with lysine, of a number average molecular weight (Mn) of 40 0000 %-31.12.2023
0.7099ex 3907 29 2025Copolymer of propylene oxide and butylene oxide, monododecylether, containing by weight:

—48 % or more but not more than 52 % of propylene oxide and

—48 % or more but not more than 52 % of butylene oxide
0 %-31.12.2023
0.2876ex 3907 29 2030Mixture, containing by weight 70 % or more but not more than 80 % of a polymer of glycerol and 1,2-epoxypropane and 20 % or more but not more than 30 % of a copolymer of dibutyl maleate and N-vinyl-2-pyrrolidone0 %-31.12.2023
0.7532ex 3907 29 2035Mixture containing by weight:

—5 % or more but not more than 15 % of a copolymer of glycerol, propylene oxide and ethylene oxide (CAS RN 9082-00-2), and

—85 % or more but not more than 95 % of a copolymer of sucrose, propylene oxide and ethylene oxide (CAS RN 26301-10-0)
0 %-31.12.2023
0.4013ex 3907 29 2040Copolymer of tetrahydrofuran and tetrahydro-3-methylfuran with a number average molecular weight (Mn) of 900 or more but not more than 3 6000 %-31.12.2023
0.6351ex 3907 29 2050Poly(p-phenylene oxide) in the form of powder

—with a glasstransitiontemperature of 210 °C,

—with a weight average molecular weight (Mw) of 35 000 or more but not more than 80 000 ,

—with an inherent viscosity of 0,2 or more but not more than 0,6 dl/gram
0 %-31.12.2024
0.3271ex 3907 29 9915Poly(oxypropylene) having alkoxysilyl end-groups0 %-31.12.2023
0.7478ex 3907 29 99202,3-Bis(methylpolyoxyethylene-oxy)-1-[(3-maleimido-1-oxopropyl)amino]propyloxy propane (CAS RN 697278-30-1) with a number average molecular weight (Mn) of at least 20 kDa whether or not modified with a chemical entity enabling a linkage between the PEG and a protein or a peptide0 %-31.12.2023
0.2920ex 3907 29 9930Homopolymer of 1-chloro-2,3-epoxypropane (epichlorohydrin)0 %-31.12.2023
0.7484ex 3907 29 9940N-(methoxypoly (ethylene glycol) -N-(1-acetyl- (2-methoxypoly (ethylene glycol)) -glycine (CAS RN 600169-00-4) with a number average molecular weight (Mn) for polyethylene glycol of 40 kDa0 %-31.12.2023
0.3269ex 3907 29 9945Copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups0 %-31.12.2023
0.4536ex 3907 29 9950Vinyl-silyl terminated perfluoropolyether polymer or an assortment of two components consisting of the same type of vinyl-silyl terminated perfluoropolyether polymer as the main ingredient0 %-31.12.2023
0.4546ex 3907 29 9955Succinimidyl ester of methoxy poly(ethylene glycol)propionic acid, of a number average molecular weight (Mn) of 5 0000 %-31.12.2023
0.5144ex 3907 29 9960Polytetramethylene oxide di-p-aminobenzoate0 %-31.12.2026
0.6839ex 3907 30 0015Epoxide resin, halogen-free,

—containing by weight more than 2 % phosphoros calculated on the solid content, chemically bound in the epoxide resin,

—not containing any hydrolysable chloride or containing less than 300 ppm hydrolysable chloride, and

—containing solvents,

for use in the manufacture of prepreg sheets or rolls of a kind used for the production of printed circuits (1)
0 %-31.12.2025
0.6840ex 3907 30 0025Epoxide resin

—containing by weight 21 % or more of brome,

—not containing any hydrolysable chloride or containing less than 500 ppm hydrolysable chloride, and

—containing solvents
0 %-31.12.2025
0.2759ex 3907 30 0040Epoxide resin, containing by weight 70 % or more of silicon dioxide, for the encapsulation of goods of headings 8504 , 8533 , 8535 , 8536 , 8541 , 8542 or 8548  (1)0 %-31.12.2023
0.7427ex 3907 30 0070Preparation of epoxy resin (CAS RN 29690-82-2) and phenolic resin (CAS RN 9003-35-4) containing by weight:

—65 % or more but not more than 75 % of silicon dioxide (CAS RN 60676-86-0), and

—none or not more than 0,5 % of carbon black (CAS RN 1333-86-4)
0 %-31.12.2027
0.2541ex 3907 40 0035α-Phenoxycarbonyl-ω-phenoxypoly[oxy(2,6-dibromo-1,4-phenylene) isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 94334-64-2)0 %-31.12.2023
0.2564ex 3907 40 0045α-(2,4,6-Tribromophenyl)-ω-(2,4,6-tribromophenoxy)poly[oxy(2,6-dibromo-1,4-phenylene)isopropylidene(3,5-dibromo-1,4-phenylene)oxycarbonyl] (CAS RN 71342-77-3)0 %-31.12.2023
0.6352ex 3907 40 0070Polycarbonate of phosgene and bisphenol A:

—containing by weight 12 % or more but not more than 26 % of a copolymer of isophthaloyl chloride, terephthaloyl chloride and resorcinol,

—with p-cumylphenol endcaps, and

—with a weight average molecular weight (Mw) of 29 900 or more but not more than 31 900
0 %-31.12.2024
0.6355ex 3907 40 0080Polycarbonate of carbonic dichloride, 4,4'-(1-methylethylidene)bis[2,6-dibromophenol] and 4,4'-(1-methylethylidene)bis[phenol] with 4-(1-methyl-1-phenylethyl)phenol endcaps0 %-31.12.2024
0.3263ex 3907 69 0010Copolymer of terephthalic acid and isophthalic acid with ethylene glycol, butane-1,4-diol and hexane-1,6-diol0 %-31.12.2023
0.29803907 70 00Poly(lactic acid)0 %-31.12.2023
0.2918ex 3907 91 9010Diallyl phthalate prepolymer, in powder form0 %-31.12.2024
0.2977ex 3907 99 8010Poly(oxy-1,4-phenylenecarbonyl) (CAS RN 26099-71-8), in the form of powder0 %-31.12.2023
0.5639ex 3907 99 8025Copolymer, containing 72 % by weight or more of terephthalic acid and/or isomers thereof and cyclohexanedimethanol0 %-31.12.2027
0.4940ex 3907 99 80

ex 3913 90 00
30

20
Poly(hydroxyalkanoate), predominantly consisting of poly(3-hydroxybutyrate)0 %-31.12.2025
0.7491ex 3907 99 8035Copolymer in form of a clear, pale yellow liquid, consisting of

—phthalic acid isomers and/or aliphatic dicarboxylic acids,

—aliphatic diols, and

—fatty acid end-caps

with:

—a hydroxyl number of 120 mg KOH or more but not more than 350 mg KOH,

—a viscosity at 25 °C of 2 000  cPs or more but not more than 8 000 cPs, and

—an acid value less than 10 mg KOH/g
0 %-31.12.2023
0.5057ex 3907 99 8080Copolymer, consisting of 72 % by weight or more of terephthalic acid and/ or derivatives thereof and cyclohexanedimethanol, completed with linear and/ or cyclic dioles0 %-31.12.2025
0.2923ex 3908 90 0010Poly(iminomethylene-1,3-phenylenemethyleneiminoadipoyl), in one of the forms mentioned in note 6 (b) to Chapter 390 %-31.12.2023
0.3261ex 3908 90 0030Reaction product of mixtures of octadecanecarboxylic acids polymerised with an aliphatic polyetherdiamine0 %-31.12.2023
0.7428ex 3909 20 0010Polymer mixture, containing by weight:

—60 % or more but not more than 75 % of melamine resin (CAS RN 9003-08-1),

—15 % or more but not more than 25 % of silicon dioxide (CAS RN 14808-60-7 or 60676-86-0),

—5 % or more but not more than 15 % of cellulose (CAS RN 9004-34-6), and

—1 % or more but not more than 15 % of phenolic resin (CAS RN 25917-04-8)
0 %-31.12.2027
0.5032ex 3909 40 0020Powder of thermosetting resin in which magnetic particles have been evenly distributed, for use in the manufacture of ink for photocopiers, fax machines, printers and multifunction devices (1)0 %-31.12.2025
0.7865ex 3909 40 0070Polymer in the form of flakes composed of 98 % or more by weight of phenolic resin (brominated octylphenol-formaldehyde) with a softening point of 80 °C or more but not exceeding 95 °C according to standard ASTM E28-92 (CAS RN 112484-41-0)0 %-31.12.2024
0.4595ex 3909 50 9010UV curable water soluble liquid photopolymer consisting of a mixture by weight of

—60 % or more of two-functional acrylated polyurethane oligomers and

—30 % (± 8 %) of mono-functional and tri-functional (metha) acrylates, and

—10 % (± 3 %) of hydroxyl functionalized mono-functional (metha) acrylates
0 %-31.12.2024
0.6423ex 3909 50 9020Preparation containing by weight:

—14 % or more but not more than 18 % of ethoxylated polyurethane modified with hydrophobic groups,

—3 % or more but not more than 5 % of enzymatically modified starch, and

—77 % or more but not more than 83 % of water
0 %-31.12.2024
0.6420ex 3909 50 9030Preparation containing by weight:

—16 % or more but not more than 20 % of ethoxylated polyurethane modified with hydrophobic groups,

—19 % or more but not more than 23 % of diethylene glycol butyl ether, and

—60 % or more but not more than 64 % of water
0 %-31.12.2024
0.6424ex 3909 50 9040Preparation containing by weight:

—34 % or more but not more than 36 % of ethoxylated polyurethane modified with hydrophobic groups,

—37 % or more but not more than 39 % of propylene glycol, and

—26 % or more but not more than 28 % of water
0 %-31.12.2024
0.6921ex 3910 00 0015Dimethyl, methyl(propyl(polypropylene oxide)) siloxane (CAS RN 68957-00-6), trimethylsiloxy-terminated0 %-31.12.2026
0.3260ex 3910 00 0020Block copolymer of poly(methyl-3,3,3-trifluoropropylsiloxane) and poly[methyl(vinyl)siloxane]0 %-31.12.2023
0.7057ex 3910 00 0025Preparations containing by weight:

—10 % or more, 2-hydroxy-3-[3-[1,3,3,3-tetramethyl-1-[(trimethylsilyl)oxy] disiloxanyl] propoxy] propyl-2-methyl-2-propenoate (CAS RN 69861-02-5), and

—10 % or more, α-Butyldimethylsilyl- ω -3-[(2-methyl-1-oxo-2-propen-1-yl)oxy]propyl-terminated silicone polymer (CAS RN 146632-07-7)
0 %-31.12.2026
0.7058ex 3910 00 0035Preparations containing by weight:

—30 % or more, α -Butyldimethylsilyl- ω -(3-methacryloxy-2-hydroxypropyloxy)propyldimethylsilyl-polydimethylsiloxane (CAS RN 662148-59-6) and

—10 % or more, N,N – Dimethylacrylamide (CAS RN 2680-03-7)
0 %-31.12.2026
0.4049ex 3910 00 0040Silicones of a kind used in the manufacture of long term surgical implants0 %-31.12.2026
0.7217ex 3910 00 0045Dimethyl siloxane, hydroxy-terminated polymer with a viscosity of 38-100 MPa·s (CAS RN 70131-67-8)0 %-31.12.2026
0.4300ex 3910 00 0050Silicone based pressure sensitive adhesive in solvent containing copoly(dimethylsiloxane/diphenylsiloxane) gum0 %-31.12.2027
0.7218ex 3910 00 0055Preparation containing by weight:

—55 % or more but not more than 65 % of vinyl terminated polydimethylsiloxane (CAS RN 68083-19-2),

—30 % or more but not more than 40 % of dimethylvinylated and trimethylated silica (CAS RN 68988-89-6), and

—1 % or more but not more than 5 % of silicic acid, sodium salt, reaction products with chlorotrimethylsilane and isopropyl alcohol (CAS RN 68988-56-7)
0 %-31.12.2026
0.4845ex 3910 00 0060Polydimethylsiloxane, whether or not polyethylene glycol and trifluoropropyl substituted, with methacrylate end groups0 %-31.12.2024
0.7953ex 3910 00 0065Liquid copolymer based on polydimethylsiloxane with terminal epoxide groups CAS RN 2102536-93-4)0 %-31.12.2025
0.5926ex 3910 00 0070Passivating silicon coating in primary form, to protect edges and prevent short circuits in semiconductor devices0 %-31.12.2023
0.8097ex 3910 00 0075Copolymer of 80 % dimethylsiloxane, 10 % methyl methacrylate and 10 % butyl acrylate in the form of a white powder0 %-31.12.2025
0.6324ex 3910 00 0080Monomethacryloxypropylterminated poly(dimethylsiloxane)0 %-31.12.2024
0.4413ex 3911 10 0081Non-hydrogenated hydrocarbon resin, obtained by polymerization of more than 75 % by weight C-5 to C-12 cycloaliphatic alkenes and more than 10 % but not more than 25 % by weight aromatic alkenes yielding a hydrocarbon resin with:

—an iodine value of more than 120 and

—a Gardner Colour of more than 10 for the pure product or

—a Gardner Colour of more than 8 for a 50 % solution by weight in toluene (as determined by the ASTM method D6166)
0 %-31.12.2023
0.8220ex 3911 90 1915Polyetherimide of 4,4'-[(isopropylidene)bis(p-phenylenoxy)]diphthalic dianhydride and 1,3-benzenediamine or 1,4-benzenediamine (CAS RN 61128-46-9 or CAS RN 61128-47-0)0 %-31.12.2026
0.7163ex 3911 90 1920Set of two components, in a volume ratio of 1:1, intended to produce a thermosetting polydicyclopentadiene after mixing, both components containing:

—83 % or more by weight of 3a,4,7,7a-tetrahydro-4,7-methanoindene (dicyclopentadiene),

—a synthetic rubber,

—whether or not containing by weight 7 % or more of tricyclopentadiene.

and each separate component containing:

—either an aluminium-alkyl compound,

—or an organic complex of tungsten

—or an organic complex of molybdenum
0 %-31.12.2023
0.4280ex 3911 90 1930Copolymer of ethyleneimine and ethyleneimine dithiocarbamate, in an aqueous solution of sodium hydroxide0 %-31.12.2027
0.5145ex 3911 90 1940m-Xylene formaldehyde resin0 %-31.12.2026
0.6519ex 3911 90 1970Preparation, containing:

—Cyanic acid, C,C'-((1-methylethylidene)di-4,1-phenylene) ester, homopolymer (CAS RN 25722-66-1),

—1,3-Bis(4-cyanophenyl)propane (CAS RN 1156-51-0),

—in a solution of butanone (CAS RN 78-93-3) with a content of less than 50 % by weight
0 %-31.12.2024
0.8450ex 3911 90 1980Poly(oxy-1,4-phenylenesulfonyl-1,4-phenylene) (CAS RN 25608-63-3 and CAS RN 25667-42-9) containing by weight not more than 20 % of additives0 %-31.12.2027
0.8218ex 3911 90 9923Aqueous solution consisting of by weight 25 % or more, but not more than 40 % of a poly(isobutylene-maleic anhydride) modified with:

—N,N-dimethylpropane-1,3-diamine,

—a copolymer of ethylene oxide and propylene oxide, having aminopropyl and methoxy end-groups,

—ethanol

(CAS RN 497926-97-3)
0 %-31.12.2026
0.3257ex 3911 90 9925Copolymer of vinyltoluene and α-methylstyrene0 %-31.12.2023
0.5109ex 3911 90 9935Alternated copolymer of ethylene and maleic anhydride (EMA)0 %-31.12.2025
0.8009ex 3911 90 9938Mixture containing by weight:

—90 % (± 1 %) of 1,4:5,8- Dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-,polymer with 3a,4,7,7a- tetrahydro- 4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and

—10 % (± 1 %) of a hydrogenated styrene butadiene copolymer (CAS RN 66070-58-4)
0 %-31.12.2025
0.3221ex 3911 90 9940Mixed calcium and sodium salt of a copolymer of maleic acid and methyl vinyl ether, having a calcium content of 9 % or more but not more than 16 % by weight0 %-31.12.2023
0.3256ex 3911 90 9945Copolymer of maleic acid and methyl vinyl ether0 %-31.12.2023
0.8010ex 3911 90 9948Mixture containing by weight:

—90 % (± 1 %) of 1,4:5,8-dimethanonaphthalene, 2-ethylidene-1,2,3,4,4a,5,8,8a-octahydro-, polymer with 3a,4,7,7a-tetrahydro-4,7-methano-1H-indene, hydrogenated (CAS RN 881025-72-5), and

—10 % (± 1 %) of an ethylene-propylene copolymer (CAS RN 9010-79-1)
0 %-31.12.2025
0.3255ex 3911 90 9965Calcium zinc salt of a copolymer of maleic acid and methyl vinyl ether0 %-31.12.2023
0.4091ex 3911 90 9986Copolymer of methyl vinyl ether and maleic acid anhydride (CAS RN 9011-16-9)0 %-31.12.2026
0.4912ex 3912 11 0030Cellulose triacetate (CAS RN 9012-09-3)0 %-31.12.2026
0.4953ex 3912 11 0040Cellulose diacetate powder0 %-31.12.2025
0.3251ex 3912 39 8510Ethylcellulose, not plasticized0 %-31.12.2023
0.3253ex 3912 39 8520Ethylcellulose, in the form of an aqueous dispersion containing hexadecan-1-ol and sodium dodecyl sulphate, containing by weight 27 (± 3) % of ethylcellulose0 %-31.12.2023
0.3252ex 3912 39 8530Cellulose, both hydroxyethylated and alkylated with alkyl chain-lengths of 3 or more carbon atoms0 %-31.12.2023
0.6718ex 3912 39 8550Polyquaternium 10 (CAS RN 68610-92-4)0 %-31.12.2025
0.4017ex 3912 90 1020Hydroxypropyl methylcellulose phthalate0 %-31.12.2023
0.3898ex 3913 90 0030Protein, chemically or enzymatically modified by carboxylation and/or phthalic acid addition, whether or not hydrolysed, having a weight average molecular weight (Mw) of less than 350 0000 %-31.12.2023
0.3749ex 3913 90 0085Sterile sodium hyaluronate (CAS RN 9067-32-7)0 %-31.12.2023
0.3249ex 3913 90 0095Chondroitinsulphuric acid, sodium salt (CAS RN 9082-07-9)0 %-31.12.2023
0.8323ex 3914 00 0010Aqueous suspension, containing by weight

—20 % or more but not more than 30 % of beaded agarose, modified with nitrilotriacetic acid and loaded with divalent nickel ions (CAS RN 1615227-97-8), and

—20 % or more but not more than 30 % of ethanol (CAS RN 64-17-5)
0 %-31.12.2027
0.4797ex 3916 20 0091Profiles of poly(vinyl chloride) of a kind used in the manufacture of sheet pilings and facings, containing the following additives:

—titanium dioxide,

—poly(methyl methacrylate),

—calcium carbonate,

—binding agents
0 %-31.12.2024
0.5988ex 3916 90 1010Rods with cellular structure, containing by weight:

—polyamide-6 or poly(epoxy anhydride)

—7 % or more but not more than 9 % of polytetrafluorethylene if present

—10 % or more but not more than 25 % of inorganic fillers
0 %-31.12.2023
0.8116ex 3917 31 00

ex 3917 32 00

ex 3917 39 00
30

20

20
Tubings:

—with an outer diameter of 0,33 mm or more but not more than 3,3 mm,

—with an inner diameter of 0,01 mm or more but not more than 2,1 mm,

—suitable for a maximum working pressure rate from 2,7 MPa up to 70 MPa,

—suitable for all solutions used in chromatography,

—whether or not with fused silica,

—whether or not covered with PEEK,

for use in chromatographic system (1)
0 %-31.12.2026
0.8268ex 3917 32 0030Heat shrinkable tube:

—containing by weight 80 % or more polymer,

—with an insulation resistance of 90 MΩ or more,

—with a dielectric strength of 35 kV / mm or more,

—with a wall thickness of 0,04 mm or more, but not more than 0,9 mm,

—with a lay-flat width of 18 mm or more, but not more than 156 mm,

for use in the manufacture of aluminium electrolytic capacitors (1)
0 %-31.12.2023
0.8117ex 3917 40 0020Plastic fittings (kit of nuts and ferrules or nuts) and connectors:

—threaded,

—supported with or without a stainless steel ring,

—suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,

for tubings with:

—outer diameter of 0,33 mm or more but not more than 3,3 mm,

—suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,

—suitable for all solutions used in chromatography,

for use in the production of chromatographic systems (1)
0 %-31.12.2026
0.4641ex 3917 40 0091Plastic connectors containing O-rings, a retainer clip and a release system for insertion into car fuel hoses0 %-31.12.2024
0.2421ex 3919 10 19

ex 3919 10 80

ex 3919 90 80
10

25

31
Reflecting film, consisting of a layer of polyurethane, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film0 %-31.12.2023
0.4800ex 3919 10 80

ex 3919 90 80
27

20
Polyester film:

—coated on one side with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner, and

—on the other side not coated or coated with an acrylic pressure sensitive adhesive or with an acrylic thermal release adhesive that debonds at temperatures of 90 °C or more but not more than 200 °C, and a polyester liner
0 %-31.12.2024
0.2910ex 3919 10 8035Reflecting film, consisting of a layer of poly(vinyl chloride), a layer of alkyd polyester, with, on one side, security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use, only visible by means of a retroreflecting lighting, and embedded glass beads and, on the other side, an adhesive layer, covered on one side or on both sides with a release film0 %-31.12.2023
0.4757ex 3919 10 8037Polytetrafluoroethylene film:

—with a thickness of 100 μm or more,

—an elongation at break of not more than 100 %,

—coated on one side with a pressure sensitive silicon adhesive
0 %-31.12.2025
0.4303ex 3919 10 80

ex 3919 90 80
45

45
Reinforced polyethylene foam tape, coated on both sides with an acrylic micro channelled pressure sensitive adhesive and on one side a liner, with an application thickness of 0,38 mm or more but not more than 1,53 mm0 %-31.12.2027
0.8109ex 3919 10 8048Plastic strips of polypropylene,

—self-adhesive,

—unilaterally adhesive-coated with an Acrylic Polymer,

—in rolls with a width of 20 cm or less,

—with a thickness including adhesion layer of 0,03 mm or less,

for use in the manufacturing of lithium-ion electric rechargeable batteries (1)
3.2 %-31.12.2023
0.3035ex 3919 10 80

ex 3919 90 80

ex 3920 10 89
50

41

25
Adhesive film consisting of a base of a copolymer of ethylene and vinyl acetate (EVA) of a thickness of 70 μm or more and an adhesive part of acrylic type of a thickness of 5 μm or more, for use in the grinding and/or dicing process of silicon discs (1)0 %-31.12.2023
0.3036ex 3919 10 80

ex 3919 90 80
55

53
Acrylic foam tape, covered on one side with a heat activatable adhesive or an acrylic pressure sensitive adhesive and on the other side with an acrylic pressure sensitive adhesive and a release sheet, of a peel adhesion at an angle of 90 o of more than 25 N/cm (as determined by the ASTM D 3330 method)0 %-31.12.2027
0.2416ex 3919 10 80

ex 3919 90 80

ex 3920 61 00
57

30

30
Reflecting sheet:

—of a polycarbonate or acrylic polymer film embossed on one side in a regular shaped pattern

—covered on one or both sides with one or more layers of plastic or metallisation, and

—whether or not covered on one side with a self-adhesive layer and a release sheet
0 %-31.12.2023
0.6886ex 3919 10 8063Reflecting film consisting of

—a layer of an acrylic resin with imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use,

—a layer of an acrylic resin having embedded glass beads,

—a layer of an acrylic resin hardened by a melamine cross-linking agent,

—a metal layer,

—an acrylic adhesive, and

—a release film
0 %-31.12.2025
0.4545ex 3919 10 80

ex 3919 90 80
73

50
Self-adhesive reflecting sheet whether or not in segmented pieces,

—whether or not containing a watermark,

—with or without an application tape coated on one side with an adhesive;

the reflective sheet consists of:

—a layer of acrylic or vinyl polymer,

—a layer of poly(methyl methacrylate) or polycarbonate containing microprisms,

—a layer of metallisation,

—an adhesive layer, and

—a release sheet

—whether or not containing an additional layer of polyester
0 %-31.12.2023
0.5166ex 3919 10 80

ex 3919 90 80
75

80
Self-adhesive reflecting film, consisting of several layers including:

—a copolymer of acrylic resin,

—polyurethane,

—a metallised layer with, on one side, laser imprints against counterfeiting, alteration or substitution of data or duplications, or an official mark for an intended use,

—glass microspheres, and

—an adhesive layer, with a release liner on one or both sides
0 %-31.12.2026
0.4799ex 3919 10 80

ex 3919 90 80
85

28
Poly(vinyl chloride), poly(ethyleneterephthalate), polyethylene or any other polyolefin film:

—coated on one side with an acrylic UV-sensitive adhesive and a liner

—of a total thickness of 65 μm or more without release liner
0 %-31.12.2024
0.4414ex 3919 90 8019Transparent poly(ethylene terephthalate) self-adhesive film:

—free from impurities or faults,

—coated on one side with an acrylic pressure sensitive adhesive and a protective liner, and on the other side with an antistatic layer of ionic organic choline compound,

—whether or not with a printable dust-proof layer of modified long chain alkyl organic compound,

—with a total thickness without the liner of 54 μm or more but not more than 64 μm, and

—a width of more than 1 295  mm but not more than 1 305  mm
0 %-31.12.2023
0.4314ex 3919 90 8022Polyester, polyethylene or polypropylene film coated on one or both sides with an acrylic and/or rubber pressure sensitive adhesive, whether or not supplied with a release liner, put up in rolls of a width of 45,7 cm or more but not more than 160 cm0 %-31.12.2024
0.3243ex 3919 90 8023Film consisting of 1 to 3 laminated layers of poly(ethylene terephthalate) and a copolymer of terephthalic acid, sebacic acid and ethylene glycol, coated on one side with an acrylic abrasion resistant coating and on the other side with an acrylic pressure sensitive adhesive, a water soluble methylcellulose coating and a poly(ethylene terephthalate) protective liner0 %-31.12.2023
0.4760ex 3919 90 8024Reflecting laminated sheet:

—consisting of an epoxy acrylate layer embossed on one side in a regular shaped pattern,

—covered on both sides with one or more layers of plastic material and

—covered on one side with an adhesive layer and a release sheet
0 %-31.12.2024
0.4415ex 3919 90 8033Transparent poly(ethylene) self-adhesive film, free from impurities or faults, coated on one side with an acrylic pressure sensitive adhesive, with a thickness of 60 μm or more, but not more than 70 μm, and with a width of more than 1 245  mm but not more than 1 255  mm0 %-31.12.2023
0.4398ex 3919 90 8035Reflecting layered sheet on rolls, with a width of more than 20 cm, showing an embossed regular pattern, consisting of poly(vinyl chloride) film coated on one side with:

—a layer of polyurethane containing glass micro beads,

—a layer of poly(ethylene vinyl acetate),

—an adhesive layer, and

—a release sheet
0 %-31.12.2023
0.7503ex 3919 90 8037Polyethylene or polycarbonate film, cut into ready to use forms,

—one side partly printed whereby part of the printing either gives information about the meaning of LED’s visible at the unprinted areas, or marks those points which must be touched to operate the system,

—the other side partly covered with an adhesive layer,

—both sides covered with a release liner, and

—with dimensions of not more than 14 cm x 2,5 cm,

for use in the manufacture of push-button switches for mechatronic system adjustable furniture (1)
0 %-31.12.2023
0.4445ex 3919 90 8049Reflecting laminated sheet consisting of a film of poly(methyl methacrylate) embossed on one side in a regular shaped pattern, a film of a polymer containing glass microspheres, an adhesive layer and a release sheet0 %-31.12.2023
0.5507ex 3919 90 8051Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm, covered on one side with an adhesive layer and a release sheet0 %-31.12.2023
0.4532ex 3919 90 8054Poly(vinyl chloride) film, on one side covered with

—a polymer layer

—an adhesive layer

—a release liner, on one side embossed, containing oblate spheres;

whether or not on the other side covered with an adhesive layer and a metallised polymer layer
0 %-31.12.2024
0.4947ex 3919 90 8065Self-adhesive film with a thickness of 40 μm or more, but not more than 475 μm, consisting of one or more layers of transparent, metallised or dyed poly(ethylene terephthalate), covered on one side with a scratch resistant coating and on the other side with a pressure sensitive adhesive and a release liner0 %-31.12.2025
0.4925ex 3919 90 8070Self-adhesive polishing discs of microporous polyurethane, whether or not coated with a pad0 %-31.12.2025
0.4964ex 3919 90 8082Reflecting film consisting of:

—a polyurethane layer,

—a glass microspheres layer,

—a metallised aluminium layer, and

—an adhesive, covered on one or both sides with a release liner,

—whether or not a poly(vinyl chloride) layer,

—a layer whether or not incorporating security imprints against counterfeiting, alteration or substitution of data or duplication, or an official mark for an intended use
0 %-31.12.2025
0.4459ex 3919 90 8083Reflector or diffuser sheets, in rolls,

—for protection against ultraviolet or infra-red heat radiation, to be affixed to windows or

—for equal transmission and distribution of light, intended for LCD modules
0 %-31.12.2027
0.3241ex 3920 10 2530Mono-layered High-Density Polyethylene film:

—containing by weight 99 % or more of polyethylene,

—with a thickness of 12 μm or more but not more than 20 μm,

—with a length of 4 000  m or more but not more than 7 000  m,

—with a width of 600 mm or more but not more than 900 mm
0 %-31.12.2023
0.8440ex 3920 10 2820A Separator film of polyethylene:

—coated on one side with a layer of aluminium oxide,

—containing by weight not more than 70 % of polyethylene,

—containing by weight not more than 30 % of aluminum oxide,

—with a total thickness of 5 μm or more but not more than 25 μm,

for use in the manufacture of lithium-ion batteries (1)
3.2 %-31.12.2023
0.4419ex 3920 10 2891Poly(ethylene) film printed with a graphic design, which is achieved by using four base colours in ink plus specialist colours, to achieve multiple colours in ink on one side of the film, and one colour on the opposite side, the graphic design also has the following characteristics:

—is repetitive and equally spaced along the length of the film

—is equally and visibly aligned when viewed from the back or front of the film
0 %-31.12.2023
0.6640ex 3920 10 4040Tubular layered film predominately of polyethylene:

—consisting of a tri-layer barrier with a core layer of ethylene vinyl alcohol covered on either side with a layer of polyamide, covered on either side with at least one layer of polyethylene,

—having a total thickness of 55 μm or more,

—having a diameter of 500 mm or more but not more than 600 mm
0 %-31.12.2025
0.3754ex 3920 10 8940Composite sheet containing an acrylic coating and laminated to a high-density polyethylene layer, of a total thickness of 0,8 mm or more but not more than 1,2 mm0 %-31.12.2027
0.8149ex 3920 10 8945Octene and ethylene copolymer plastic film of a thickness of 0,45 mm or more but not more than 0,75 mm, for use in the manufacture of glass to glass photovoltaic solar panels (1)0 %-31.12.2027
0.5139ex 3920 10 8955Ethylene vinyl acetate (EVA) film:

—with a raised relief surface with embossed undulations,

—not laminated,

—not cross-linked, and

—with a thickness of more than 0,3 mm
0 %-31.12.2026
0.5482ex 3920 20 2140Sheets of biaxially - oriented polypropylene film:

—with the thickness of not more than 0,1 mm,

—printed on both sides with specialised coatings to allow banknote security printing
0 %-31.12.2023
0.8205ex 3920 20 2150Biaxialy oriented film of multiple layers of polypropylene, with a total thickness of not more than 14 micron0 %-31.12.2026
0.4394ex 3920 20 2960Mono-axial oriented film, of a total thickness of not more than 75μm, consisting of three or four layers, each layer containing a mixture of polypropylene and polyethylene, with a core layer whether or not containing titanium dioxide, having:

—a tensile strength in the machine direction of 120 MPa or more but not more than 270 MPa and

—a tensile strength in the transverse direction of 10 MPa or more but not more than 40 MPa

as determined by test method ASTM D882/ISO 527-3
0 %-31.12.2023
0.3028ex 3920 20 2970Mono-axial oriented film, consisting of three layers, each layer consisting of a mixture of polypropylene and a copolymer of ethylene and vinyl acetate, with a core layer whether or not containing titanium dioxide, having:

—a thickness of 55 μm or more but not more than 97 μm,

—a tensile modulus in the machine direction of 0,30 GPa or more but not more than 1,45 GPa, and

—a tensile modulus in the transverse direction of 0,20 GPa or more but not more than 0,70 GPa
0 %-31.12.2024
0.5167ex 3920 20 2994Mono-axial oriented, co-extruded film:

—consisting of 3 to 5 layers,

—each layer mainly consisting of polypropylene and/or polyethylene,

—each layer containing not more than 10 % by weight of other polymers,

—whether or not containing titanium dioxide in the core layer,

—of an overall thickness of not more than 75 μm
0 %-31.12.2027
0.3024ex 3920 43 1092Sheeting of poly(vinyl chloride), stabilized against ultraviolet rays, without any holes, even microscopic, of a thickness of 60 μm or more but not more than 80 μm, containing 30 or more but not more than 40 parts of plasticiser to 100 parts of poly(vinyl chloride)0 %-31.12.2023
0.3235ex 3920 43 10

ex 3920 49 10
94

93
Film of a specular gloss of 70 or more, measured at an angle of 60 ° using a glossmeter (as determined by the ISO 2813:2000 method), consisting of one or two layers of poly(vinyl chloride) coated on both sides with a layer of plastic, of a thickness of 0,26 mm or more but not more than 1,0 mm, covered on the gloss surface with a protective film of polyethylene, in rolls of a width of 1 000  mm or more but not more than 1 450  mm, for use in the manufacture of goods of heading 9403  (1)0 %-31.12.2023
0.3026ex 3920 43 1095Reflecting laminated sheet, consisting of a film of poly(vinyl chloride) and a film of an other plastic totally embossed in a regular pyramidal pattern, covered on one side with a release sheet0 %-31.12.2023
0.5930ex 3920 49 1030Film of a (polyvinyl)chloride-copolymer

—containing by weight 45 % or more of fillers

—on a support
0 %-31.12.2023
0.3021ex 3920 51 0020Plate of poly(methyl methacrylate) containing aluminium trihydroxide, of a thickness of 3,5 mm or more but not more than 19 mm0 %-31.12.2023
0.5506ex 3920 51 0030Biaxially-oriented film of poly(methyl methacrylate), of a thickness of 50 μm or more but not exceeding 90 μm0 %-31.12.2023
0.5753ex 3920 51 0040Sheets of polymethylmethacrylate conforming to standard EN 4366 (MIL-PRF-25690)0 %-31.12.2023
0.7949ex 3920 61 0040Extruded thermoplastic foils or films of polycarbonate with:

—matt surface texture on both sides

—a thickness of more than 50 μm but not more than 200 μm,

—a width of 800 mm or more, but not more than 1 500  mm, and

—a length of 300 m or more, but not more 2 500 m
0 %-31.12.2025
0.8274ex 3920 61 0050Coextruded film of polycarbonate main layer and polymethyl methacrylate top layer with a:

—total thickness of more than 230 μm but not more than 270 μm,

—top layer thickness of more than 40 μm but not more than 55 μm,

—defined surface roughness of the top layer of 0,5 μm or less (according to ISO 4287),

—UV-stabilized top layer
0 %-31.12.2026
0.7418ex 3920 62 19

ex 3920 62 90
05

10
Poly(ethylene terephthalate) film in rolls:

—with a thickness of 0,335 mm or more but not more than 0,365 mm, and

—coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm
0 %-31.12.2027
0.3234ex 3920 62 1908Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 μm, either:

—only dyed in the mass, or

—dyed in the mass and metallised on one side
0 %-31.12.2023
0.3017ex 3920 62 1912Film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material0 %-31.12.2023
0.3022ex 3920 62 1918Laminated film of poly(ethylene terephthalate) only, of a total thickness of not more than 120 μm, consisting of one layer which is metallised only and one or two layers each containing a colouring and/or UV-absorbing material throughout the mass, uncoated with an adhesive or any other material0 %-31.12.2023
0.3034ex 3920 62 1920Reflecting polyester sheeting embossed in a pyramidal pattern, for the manufacture of safety stickers and badges, safety clothing and accessories thereof, or of school satchels, bags or similar containers (1)0 %-31.12.2023
0.8438ex 3920 62 1928Non-transparent poly(ethylene terephthalate) film:

—covered on one side with a layer of a fluoropolymer,

—covered on the other side with an adhesive and a layer of polyvinylidene difluoride,

—each outer layer with a thickness of 7 nm or more but not more than 80 nm,

—with a tensile strength of 300 N/cm or more (ASTM D-882),

—with a total thickness of 200 μm or more but not more than 350 μm, and

—with a width of 600 mm or more but not more than 1 600  mm
0 %-31.12.2027
0.3356ex 3920 62 1938Poly(ethylene terephthalate) film, of a thickness of not more than 12 μm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm0 %-31.12.2023
0.3357ex 3920 62 1948Sheets or rolls of poly(ethylene terephthalate):

—coated on both sides with a layer of epoxy acrylic resin,

—of a total thickness of 37 μm (± 3 μm)
0 %-31.12.2025
0.2589ex 3920 62 1952Film of polyethylene terephthalate, polyethylene naphthalate or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1 % of aluminium, of a thickness of not more than 300 μm and having a surface resistivity of not more than 10 000 ohms (per square) (as determined by the ASTM D257 method)0 %-31.12.2023
0.4344ex 3920 62 1960Poly(ethylene terephthalate) film:

—of a thickness of not more than 20 μm,

—coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2μm
0 %-31.12.2027
0.8011ex 3920 62 19

ex 3920 62 90
68

20
Poly(ethylene terephthalate) film in rolls:

—with a thickness of 50 μm or more but not more than 350 μm, and

—covered with a layer of sputtered precious metal such as gold or palladium with a thickness of 0,02 μm or more but not more than 0,06 μm
0 %-31.12.2025
0.4520ex 3920 62 1976Transparent poly(ethylene terephthalate) film:

—coated on both sides with layers of organic substances on the basis of acryl of a thickness of 7 nm or more but not more than 80 nm,

—with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm,

—with a light transmission of more than 93 %,

—with a haze value of not more than 1,3 %,

—with a total thickness of 10 μm or more but not more than 350 μm,

—with a width of 800 mm or more but not more than 1 600  mm
0 %-31.12.2023
0.3328ex 3920 69 0020Film of poly(ethylene naphthalene-2,6-dicarboxylate)0 %-31.12.2023
0.7882ex 3920 69 0030Mono- or multilayer, transverse oriented, shrink film:

—composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives and not more than 10 % by weight of additives based on biodegradable polyesters,

—with a thickness of 20 μm or more but not more than 100 μm,

—with a length of 2 385 m or more but not more than 9 075  m,

—biodegradable and compostable (as determined by the method EN 13432)
0 %-31.12.2024
0.6483ex 3920 69 0050Monolayer, biaxially oriented film:

—composed of more than 85 % by weight of poly(lactic acid) and not more than 10,50 % by weight of modified poly(lactic acid) based polymer, poly-glycol ester and talc,

—having a thickness of 20 μm or more but not more than 120 μm

—biodegradable and compostable (as determined by the method EN 13432)
0 %-31.12.2024
0.6484ex 3920 69 0060Monolayer, transverse oriented, shrink film:

—composed of more than 80 % by weight of poly(lactic acid) and not more than 15,75 % by weight of additives of modified poly(lactic acid),

—having a thickness of 45 μm or more but not more than 50 μm,

—biodegradable and compostable (as determined by the method EN 13432)
0 %-31.12.2024
0.7883ex 3920 69 0070Mono- or multilayer, biaxially oriented film:

—composed of more than 85 % by weight of polylactic acid, not more than 5 % by weight of inorganic or organic additives, and not more than 10 % by weight of additives based on biodegradable polyesters,

—with a thickness of 9 μm or more but not more than 120 μm,

—with a length of 1 395 m or more but not more than 21 560 m,

—biodegradable and compostable (as determined by the method EN 13432)
0 %-31.12.2024
0.6515ex 3920 79 1010Sheets of painted vulcanised fibre-board with a thickness of not more than 1,5 mm0 %p/st31.12.2024
0.4766ex 3920 91 0052Poly(vinyl butyral) film:

—containing by weight 26 % or more but not more than 30 % of triethyleneglycol bis(2-ethyl hexanoate) as a plasticiser,

—with a thickness of 0,73 mm or more but not more than 1,50 mm
0 %-31.12.2024
0.3329ex 3920 91 0091Poly(vinyl butyral) film having a graduated coloured band3 %-31.12.2023
0.3136ex 3920 91 0093Film of poly(ethylene terephthalate), whether or not metallised on one or both sides, or laminated film of poly(ethylene terephthalate) films, metallised on the external sides only, and having the following characteristics:

—a visible light transmission of 50 % or more,

—coated on one or both sides with a layer of poly(vinyl butyral) but not coated with an adhesive or any other material except poly(vinyl butyral),

—a total thickness of not more than 0,2 mm without taking the presence of poly(vinyl butyral) into account and a thickness of poly(vinyl butyral) of more than 0,2 mm
0 %-31.12.2024
0.4508ex 3920 91 0095Co-extruded trilayer poly(vinyl butyral) film with a graduated colour band containing by weight 29 % or more but not more than 31 % of 2,2’-ethylenedioxydiethyl bis(2-ethylhexanoate) as a plasticiser0 %-31.12.2023
0.3917ex 3920 99 2840Polymer film containing the following monomers:

—poly (tetramethylene ether glycol),

—bis (4-isocyanotocyclohexyl) methane,

—1,4-butanediol or 1,3-butanediol,

—with a thickness of 0,25 mm or more but not more than 5,0 mm,

—embossed with a regular pattern on one surface,

—and covered with a release sheet
0 %-31.12.2023
0.5938ex 3920 99 2845Transparent polyurethane film metallised on one side:

—with a gloss of more than 90 degrees according to ASTM D2457

—covered on the metallised side with a heat bonding adhesive layer consisting of polyethylene/polypropylene copolymer

—covered on the other side with a protective poly(ethylene terephthalate) film

—with a total thickness of more than 204 μm but not more than 244 μm
0 %-31.12.2024
0.8005ex 3920 99 2848Thermoplastic polyurethane foil in rolls, with:

—a width of 900 mm or more but not more than 1 016  mm,

—a matt finish,

—a thickness of 0,4 mm (± 8 %),

—an elongation at break of 480 % or more (ASTM D412 (Die C)),

—a tensil strength in machine direction of 470 (± 10) kg/cm2 (ASTM D412 (Die C)),

—a Shore A hardness of 90 (± 3) (ASTM D2240),

—a tear strength of 100 (± 10) kg/cm2 (ASTM D624 (Die C)),

—a melting point of 165 °C (± 10 °C)
0 %-31.12.2025
0.4192ex 3920 99 2850Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film0 %-31.12.2026
0.6579ex 3920 99 2865Matt, thermoplastic polyurethane foil in rolls with:

—a width of 1 640  mm (± 10 mm),

—a gloss of 3,3 degrees or more but not more than 3,8 (as determined by the method ASTM D2457),

—a surface roughness of 1,9 Ra or more but not more than 2,8 Ra (as determined by the method ISO 4287),

—a thickness of more than 365 μm but not more than 760 μm,

—a hardness of 90 (± 4) (as determined by the method: Shore A (ASTM D2240)),

—an elongation to break of 470 % (as determined by the method: EN ISO 527)
0 %m231.12.2024
0.5315ex 3920 99 2870Sheets on rolls, consisting of epoxy resin, with conducting properties, containing:

—microspheres with a coating of metal, whether or not alloyed with gold,

—an adhesive layer,

—with a protective layer of silicone or poly(ethylene terephthalate) on one side,

—with a protective layer of poly(ethylene terephthalate) on the other side, and

—with a width of 5 cm or more but not more than 100 cm

—with a length of not more than 2 000  m
0 %-31.12.2026
0.3326ex 3920 99 5925Poly(1-chlorotrifluoroethylene) film0 %-31.12.2023
0.7603ex 3920 99 5930Poly(tetrafluoroethylene) film containing by weight 10 % or more of graphite0 %-31.12.2023
0.2873ex 3920 99 5955Ion-exchange membranes of fluorinated plastic material0 %-31.12.2023
0.3135ex 3920 99 5965Film of a vinyl alcohol copolymer, soluble in cold water, of a thickness of 34 μm or more but not more than 90 μm, a tensile strength at break of 20 MPa or more but not more than 55 MPa and an elongation at break of 250 % or more but not more than 900 %0 %-31.12.2023
0.7529ex 3920 99 5975Film of fluorinated ethylene propylene resin (CAS RN 25067-11-2) with:

—a thickness of 0,010 mm or more but not more than 0,80 mm,

—a width of 1 219  mm or more but not more than 1 575  mm, and

—a melting point of 252 °C (measured according ASTM D-3418)
0 %-31.12.2023
0.4095ex 3920 99 9020Anisotropic conductive film, in rolls, of a width of 1,2 mm or more but not more than 3,15 mm and a maximum length of 300 m, used for joining electronic components in the production of LCD or plasma displays0 %-31.12.2023
0.3318ex 3921 13 1010Sheet of polyurethane foam, of a thickness of 3 mm (± 15 %) and of a specific gravity of 0,09435 or more but not more than 0,100920 %m331.12.2024
0.6066ex 3921 19 0030Blocks with cellular structure, containing by weight:

—polyamide-6 or poly(epoxy anhydride)

—7 % or more but not more than 9 % of polytetrafluorethylene if present

—10 % or more but not more than 25 % of inorganic fillers
0 %-31.12.2023
0.6911ex 3921 19 0040Transparent, microporous, acrylic acid grafted polyethylene film, in the form of rolls, with:

—a width of 98 mm or more but not more than170 mm,

—a thickness of 15 μm or more but not more than 36 μm,

of a kind used for the manufacture of alkaline battery separators
3.2 %-31.12.2023
0.7263ex 3921 19 0045Microporous monolayer film of polypropylene or a microporous trilayer film of polypropylene, polyethylene and polypropylene, each film with:

—zero transversal production direction (TD) shrinkage,

—a total thickness of 8 μm or more, but not more than 50 μm,

—a width of 15 mm or more, but not more than 900 mm,

—a length of more than 200 m, but not more than 8 000 m,

—an average pore size between 0,02 μm and 0,1 μm,

—laminated or not with a Polypropylene non-woven mat of 50 to 200 μm thickness,

—coated or not with surfactant,
3.2 %-31.12.2023
—coated or not on 1 or 2 sides with a ceramic layer of min 1 μm thickness or more, but not more than 5 μm,

—coated or not on 1 or 2 sides with a sticky binder, PVdF type or similar of min 0,5 μm thickness or more, but not more than 5 μm
0.7132ex 3921 19 0050Porous membrane of polytetrafluorethylene (PTFE) laminated to a polyester spunbonded non-woven cloth with

—a total thickness of more than 0,05 mm but not more than 0,20 mm,

—a water entry pressure between 5 and 200 kPa according to ISO 811, and

—an air permeability of 0,08 cm3/cm2/s or more according to ISO 5636-5
0 %-31.12.2026
0.7280ex 3921 19 0060Multi-porous multilayer separator foil with:

—one microporous polyethylene layer between two microporous polypropylene layers and whether or not containing a coating of aluminium oxide on both sides,

—a width of 65 mm or more but not more than 170 mm,

—a total thickness of 0,01 mm or more but not more than 0,03 mm,

—a porosity of 0,25 or more but not more than 0,65
0 %m231.12.2027
0.3314ex 3921 19 0093Strip of microporous polytetrafluoroethylene on a support of a non-woven, for use in the manufacture of filters for kidney dialysis equipment (1)0 %-31.12.2023
0.3002ex 3921 19 0095Film of polyethersulfone, of a thickness of not more than 200 μm0 %-31.12.2023
0.3003ex 3921 90 1010Composite plate of poly(ethylene terephthalate) or of poly(butylene terephthalate), reinforced with glass fibres0 %-31.12.2023
0.4379ex 3921 90 1020Poly(ethylene terephthalate) film, laminated on one side or on both sides with a layer of unidirectional nonwoven poly(ethylene terephthalate) and impregnated with polyurethane or epoxide resin0 %-31.12.2023
0.6156ex 3921 90 1030Multilayer film consisting of:

—a poly(ethylene terephthalate) film with a thickness of more than 100 μm but not more than 150 μm,

—a primer of phenolic material with a thickness of more than 8 μm but not more than 15 μm,

—an adhesive layer of a synthetic rubber with a thickness of more than 20 μm but not more than 30 μm,

—and a transparent poly(ethylene terephthalate) liner with a thickness of more than 35 μm but not more than 40 μm
0 %m231.12.2023
0.4844ex 3921 90 5525Prepreg sheets or rolls containing polyimide resin0 %-31.12.2024
0.7510ex 3921 90 5535Glass fiber impregnated with epoxy resin for use in the manufacture of smart cards (1)0 %m231.12.2023
0.6742ex 3921 90 5540Three layered fabric sheet, in rolls,

—comprising a core layer of 100 % Nylon Taffeta or Nylon/Polyester blended Taffeta,

—coated on both sides with polyamide,

—of a total thickness not more than 135 μm,

—of a total weight not more than 80 g/m2
0 %m231.12.2025
0.8291ex 3921 90 5560Membrane composed of a polyamide layer and a polysulfone layer on a cellulose support layer with:

—a total thickness of 0,25 mm or more but not more than 0,40 mm,

—a total weight of 109 g/m2 or more but not more than 114 g/m2
0 %m231.12.2026
0.3312ex 3921 90 6035Ion-exchange membranes based on a fabric coated on both sides with fluorinated plastic material, for use in chlor-alkali electrolytic cells (1)0 %-31.12.2023
0.5396ex 3923 10 9010Photomask or wafer compacts:

—consisting of antistatic materials or blended thermoplastics proving special electrostatic discharge (ESD) and outgassing properties,

—having non porous, abrasion resistant or impact resistant surface properties,

—fitted with a specially designed retainer system that protects the photomask or wafers from surface or cosmetic damage and

—with or without a gasket seal,

of a kind used in the photolithography or other semiconductor production to house photomasks or wafers
0 %-31.12.2026
0.7630ex 3926 30 0040Plastic internal door handle used in the manufacture of motor vehicles (1)0 %-31.12.2023
0.7335ex 3926 30 00

ex 3926 90 97
50

48
Coated interior or exterior decorative parts consisting of:

—a copolymer of acrylonitrile-butadiene-styrene (ABS), whether or not mixed with polycarbonate, and

—a PVC foil,

—not containing layers of copper, nickel or chromium,

for use in the manufacturing of parts for motor vehicles of heading 8701 to 8705  (1)
0 %p/st31.12.2027
0.2764ex 3926 90 9710Microspheres of a polymer of divinylbenzene, of a diameter of 4,5 μm or more but not more than 80 μm0 %-31.12.2023
0.3756ex 3926 90 9715Glass fibre reinforced plastic traverse leaf spring for use in the manufacture of motor vehicle suspension systems (1)0 %-31.12.2023
0.2978ex 3926 90 9720Reflecting sheeting or tape, consisting of a facing-strip of poly(vinyl chloride) embossed in a regular pyramidal pattern, heat-sealed in parallel lines or in a grid-pattern to a backing-strip of plastic material, or of knitted or woven fabric covered on one side with plastic material0 %-31.12.2023
0.6717ex 3926 90 9723Plastic cover with clips for the exterior rear-view mirror of motor vehicles0 %p/st31.12.2025
0.7445ex 3926 90 9727Gasket of polyethylene foam, intended to fill-up the space between the body of a motor vehicle and the base of a rear-view mirror0 %-31.12.2023
0.5474ex 3926 90 9730Parts of car radio and car air-conditioner front panels

—of acrylonitrile-butadiene-styrene with or without polycarbonate,

—coated with a copper, a nickel and a chrome layers,

—with a total thickness of coating of 5,54 μm or more but not more than 49,6 μm
0 %-31.12.2026
0.6301ex 3926 90 9733Housings, housing parts, drums, setting wheels, frames, covers, upper part, design plate and other parts of acrylonitrile-butadiene-styrene, polycarbonate, polymethylmethacrylate or thermoplastic polyurethane, of a kind used for the manufacture of remote controls0 %p/st31.12.2024
0.7061ex 3926 90 9740Silicone shell for breast implant0 %-31.12.2026
0.3850ex 3926 90 9743Mixture of water and by weight 19 % or more but not more than 35 % of expanded hollow microspheres of a copolymer of acrylonitrile, methacrylonitrile and isobornyl methacrylate or other methacrylate, of a diameter of 3 μm or more but not more than 4,95 μm0 %-31.12.2023
0.6166ex 3926 90 9750Knob of car radio front panel, made of Bisphenol A-based polycarbonate, in immediate packings of not less than 300 pieces0 %p/st31.12.2023
0.8118ex 3926 90 9758Plastic ferrules and/or plugs:

—supported with or without a stainless steel ring,

—suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,

for tubings with:

—outer diameter of 0,33 mm or more but not more than 3,3 mm,

—suitable for a maximum working pressure rate of 2,7 MPa or more but not more than 114 MPa,

—suitable for all solutions used in chromatography,

for use in the production of chromatographic systems (1)
0 %-31.12.2026
0.7196ex 3926 90 9777Silicone decoupling ring with an inner diameter of 14,7 mm or more but not more than 16,0 mm, in immediate packings of 2 500 pieces or more, of a kind used in car parking aid sensor systems0 %p/st31.12.2026
0.3046ex 4007 00 0010Siliconated vulcanised rubber thread and cord0 %-31.12.2023
0.6708ex 4009 42 0020Rubber brake hose with:

—textile strings,

—a wall thickness of 3,2 mm,

—a metal hollow terminal pressed on both ends, and

—one or more mounting brackets,

for use in the manufacture of goods of Chapter 87 (1)
0 %-31.12.2025
0.7042ex 4010 31 00

ex 4010 33 00

ex 4010 39 00
10

10

10
Vulcanized rubber endless transmission belt of trapezoidal cross-section (V-belts) with longitudinal V-ribbed pattern on the inner side for use in the manufacture of goods of Chapter 87 (1)0 %-31.12.2023
0.6844ex 4016 93 0030Rectangular ethylene-propylene-diene rubber gasket, with:

—a length of 72 mm or more but not more than 825 mm,

—a width of 18 mm or more but not more than 155 mm,

—a peak temperature of 150 °C or more but not more than 240 °C,

—a permissible material outflow at the place of the mold split of not more than 0,3 mm
0 %-31.12.2025
0.7170ex 4016 99 5710Air intake hose for air supply to the combustion part of the engine comprising at least:

—one flexible rubber hose,

—one plastic hose, and

—metal clips,

—whether or not a resonator

for use in the manufacture of goods of Chapter 87 (1)
0 %p/st31.12.2026
0.7357ex 4016 99 5730Pin boot of a brake calliper made of vulcanized rubber with:

—an inner diameter of not less than 5 mm and an outer diameter of not more than 35 mm,

—a height of 15 mm or more, but not more than 40 mm, and

—a ribbed design

for use in the manufacture of goods of Chapter 87 (1)
0 %-31.12.2024
0.5148ex 4016 99 9730Tyre moulding bladder0 %-31.12.2026
0.5842ex 4104 41 1910Buffalo leather, split, chrome tanned synthetic retanned (''crust''), dry0 %-31.12.2024
0.25554105 10 00

4105 30 90
Sheep or lamb skin leather, without wool on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 41140 %-31.12.2023
0.25534106 21 00

4106 22 90
Goat or kid skin leather, without hair on, tanned or retanned but not further prepared, whether or not split, other than leather of heading 41140 %-31.12.2023
0.25544106 31 00

4106 32 00

4106 40 90

4106 92 00
Leather of other animals, without hair on, not further prepared than tanned, other than leather of heading 41140 %-31.12.2023
0.6223ex 4408 39 3010Okoume veneer sheets:

—of a length of 1 270  mm or more, but not more than 3 200  mm,

—of a width of 150 mm or more, but not more than 2 000  mm,

—of a thickness of 0,5 mm or more, but not more than 4 mm,

—not sanded and

—not planed
0 %-31.12.2023
0.8372ex 4411 12 9210Fibreboard:

—with a thickness of 2,20 mm or more but not more than 2,80 mm,

—with a density of 0,95 g/cm3 or more,

—lacquered or coated with melamine foil on both sides, and

—with dimensions of 1 300  mm x 1 100  mm or less,

used in the manufacture of printed circuit boards (1)
0 %-31.12.2027
0.4217ex 5004 00 1010Silk yarn (other than yarn spun from silk waste) not put up for retail sale, unbleached, scoured or bleached, entirely of silk0 %-31.12.2026
0.2551ex 5005 00 10

ex 5005 00 90
10

10
Yarn spun entirely from silk waste (noil), not put up for retail sale0 %-31.12.2023
0.25445208 11 10Fabrics for the manufacture of bandages, dressings and medical gauzes5.2 %-31.12.2023
0.7372ex 5311 00 9010Plain-woven fabric of paper yarns glued on a tissue paper layer:

—with a weight of 190 g/m2 or more but not more than 280 g/m2, and

—cut into rectangles with a side length of 40 cm or more but not more than 140 cm
0 %-31.12.2027
0.7515ex 5311 00 9020Sisal cloth in rolls with;

—a length of 20 metres or more but not more than 30 metres and

—a maximum width of 2,5 metres

for use in the production of Stainless Steel Kitchenware (1)
0 %-31.12.2023
0.7608ex 5402 44 0010Synthetic elastomeric filament yarn:

—untwisted or with a twist not exceeding 50 turns per metre, measuring 300 dtex or more but not more than 1 000 dtex,

—composed of polyurethane ureas based on a copolyether glycol of tetrahydrofuran and 3-methyltetrahydrofuran,

for use in the manufacture of disposable hygiene products of heading 9619  (1)
0 %-31.12.2023
0.2975ex 5402 49 0030Yarn of a copolymer of glycollic acid with lactic acid, for the manufacture of surgical sutures (1)0 %-31.12.2023
0.3098ex 5402 49 0050Non-textured filament yarn of poly(vinyl alcohol)0 %-31.12.2023
0.3096ex 5402 49 0070Synthetic filament yarn, single, containing by weight 85 % or more of acrylonitrile, in the form of a wick containing 1 000 continuous filaments or more but not more than 25 000 continuous filaments, of a weight per metre of 0,12 g or more but not more than 3,75 g and of a length of 100 m or more, for the manufacture of carbon-fibre yarn (1)0 %m31.12.2023
0.8108ex 5403 31 0010Continuous viscose rayon filament yarn of 105 dtex or more but not more than 117 dtex, and consisting of 36 monofilaments or more but not more than 40 monofilaments0 %-31.12.2025
0.2481ex 5404 19 0050Monofilaments of polyester or poly(butylene terephthalate), with cross-sectional dimension of 0,5 mm or more but not more than 1 mm, for use in the manufacture of zippers (1)0 %-31.12.2023
0.8225ex 5404 19 0060Chemically tapered synthetic filaments of polyester with:

—a diameter of 0,1 mm or more but not more than 0,6 mm,

—a length of 30 mm or more but not more than 120 mm,

for use in the manufacture of paintbrushes (1)
0 %-31.12.2026
0.3311ex 5404 90 9020Strip of polyimide0 %-31.12.2023
0.8382ex 5407 30 0010Open mesh fabric made of thermally cross-bonded filaments of a polyolefin, with a density of 0,94 g/cm3 or more, with:

—a weight of 21 g/m2 or more but not more than 24 g/m2,

—a width of 560 mm or more but not more than 1 200  mm,

—a thickness of 100 μm or more but not more than 120 μm,

—an elongation at break of not more than 20 % (ASTM D5034, machine direction),

—an elongation at break of not more than 22 % (ASTM D5034, cross direction),

—with a stretch of not more than 100 N /5 cm (ASTM D882, machine direction), and

—with a stretch of not more than 130 N /5 cm (ASTM D882, cross direction)
0 %-31.12.2027
0.3090ex 5503 11 00

ex 5601 30 00
10

40
Synthetic staple fibres of a copolymer of terephthalic acid, p-phenylenediamine and 3,4’-oxybis(phenyleneamine), of a length of not more than 7 mm0 %-31.12.2023
0.3214ex 5503 90 00

ex 5506 90 00

ex 5601 30 00
20

10

10
Poly(vinyl alcohol) fibres, whether or not acetalized0 %-31.12.2023
0.3212ex 5603 11 10

ex 5603 11 90

ex 5603 12 10

ex 5603 12 90

ex 5603 91 10

ex 5603 91 90

ex 5603 92 10

ex 5603 92 90
10

10

10

10

10

10

10

10
Poly(vinyl alcohol) non-wovens, in the piece or cut into rectangles:

—of a thickness of 200 μm or more but not more than 280 μm and

—of a weight of 20 g/m2 or more but not more than 50 g/m2
0 %m231.12.2023
0.2552ex 5603 12 90

ex 5603 13 90

ex 5603 14 90

ex 5603 92 90

ex 5603 93 90

ex 5603 94 90
30

30

10

60

40

30
Non-wovens of aromatic polyamide fibres obtained by polycondensation of m-phenylenediamine and isophthalic acid, in the piece or cut into rectangles0 %m231.12.2023
0.2548ex 5603 12 90

ex 5603 13 90
60

60
Non-woven of spunbonded polyethylene, of a weight of more than 60 g/m2 but not more than 80 g/m2 and an air resistance (Gurley) of 8 seconds or more but not more than 36 seconds (as determined by the ISO 5636/5 method)0 %m231.12.2023
0.5059ex 5603 13 1020Non-woven of spunbonded polyethylene, with a coating,

—of a weight of more than 80 g/m2 but not more than 105 g/m2 and

—an air resistance (Gurley) of 8 seconds or more but not more than 75 seconds (as determined by the ISO 5636/5 method)
0 %m231.12.2025
0.8024ex 5603 14 1030Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:

—of weight of 160 g/m2 or more but not more than 300 g/m2,

—with a filtration efficiency of class M or better (according to DIN 60335-2-69),

—pleatable,

with at least one of following treatments:

—a coating or covering with polytetrafluoroethylene (PTFE),

—a coating with aluminium particles,

—a coating of phosphorous based flame retardants,

—a nano fiber coating of a polyamide, a polyurethane or a fluorine-containing polymer
0 %m231.12.2023
0.5987ex 5603 14 9060Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:

—of weight of 160 g/m2 or more but not more than 300 g/m2,

—with a filtration efficiency of class M or better (according to DIN 60335-2-69),

—pleatable,

—with or without an expanded polytetrafluoroethylene (ePTFE) membrane
0 %m231.12.2023
0.3041ex 5603 92 90

ex 5603 93 90
20

20
Non-wovens consisting of a meltblown central layer of a thermoplastic elastomer laminated on each side with spunbonded filaments of polypropylene0 %m231.12.2023
0.3042ex 5603 92 90

ex 5603 94 90
70

40
Non-wovens, consisting of multiple layers of a mixture of meltblown fibres and staple fibres of polypropylene and polyester, whether or not laminated on one side or on both sides with spunbonded filaments of polypropylene0 %m231.12.2023
0.5197ex 5603 92 90

ex 5603 93 90
80

50
Non-woven polyolefin fabric, consisting of an elastomeric layer, laminated on each side with polyolefin filaments:

—a weight of 25 g/m2 or more but not more than 150 g/m2,

—in the piece or simply cut into squares or rectangles,

—not impregnated,

—with cross-directional or machine-directional stretch properties

for use in the manufacture of infant/child care products (1)
0 %m231.12.2026
0.6135ex 5603 93 9060Nonwovens made of polyester fibres,

—with a weight of 85 g/m2,

—with a constant thickness of 95 μm (± 5 μm),

—neither coated nor covered,

—in 1 m wide rolls of 2 000 m to 5 000 m length,

suitable for the coating of membranes in the manufacture of osmosis and reverse osmosis filters (1)
0 %m231.12.2023
0.3210ex 5603 94 9020Acrylic fibre rods, having a length of not more than 50 cm, for the manufacture of pen tips (1)0 %m231.12.2023
0.3406ex 5607 50 9010Unsterilised twine of poly(glycolic acid) or of poly(glycolic acid) and its copolymers with lactic acid, plaited or braided, with an inner core, for the manufacture of surgical sutures (1)0 %-31.12.2024
0.2415ex 5803 00 1091Gauze of cotton, of a width of less than 1 500  mm0 %-31.12.2023
0.7081ex 5903 20 9020Two layers' plastic-laminated textile fabric with:

—one layer consisting of knitted or crocheted polyester textile fabric,

—other layer consisting of polyurethane foam,

—a weight of 150 g/m2 or more, but not more than 500 g/m2,

—a thickness of 1 mm or more, but not more than 5 mm

for use in the manufacture of the retractable roof of motor vehicles (1)
0 %-31.12.2026
0.2417ex 5906 99 9010Rubberised textile fabric, consisting of warp yarns of polyamide-6,6 and weft yarns of polyamide-6,6, polyurethane and a copolymer of terephthalic acid, p-phenylenediamine and 3,4’-oxybis(phenyleneamine)0 %-31.12.2023
0.8213ex 5906 99 9030Woven and coated rubberised textile fabric with the following characteristics:

—with three layers,

—the outer layers consist of a natural rubber, EPDM and chloropen rubber compound,

—the middle layer consists of polyester fabric,

for use in the manufacture of life rafts (1)
0 %-31.12.2026
0.2453ex 5907 00 0010Textile fabrics, coated with adhesive in which are embedded spheres of a diameter of not more than 150 μm0 %-31.12.2026
0.3207ex 5911 90 99

ex 8421 99 90
30

92
Parts of equipment for the purification of water by reverse osmosis, consisting essentially of plastic-based membranes, supported internally by woven or non-woven textile materials which are wound round a perforated tube, and enclosed in a cylindrical plastic casing of a wall-thickness of not more than 4 mm, whether or not housed in a cylinder of a wall-thickness of 5 mm or more0 %-31.12.2023
0.4638ex 5911 90 9940Multi-layered non-woven polyester polishing pads, impregnated with polyurethane0 %-31.12.2024
0.7340ex 5911 90 9950Loudspeaker vibration damper, made from round, corrugated, flexible and cut-to-size tissue of textile fibres of polyester, cotton or aramid or a combination hereof, of a kind used in car loudspeakers0 %-31.12.2027
0.6469ex 6804 21 0020Discs

—of synthetic diamonds which are agglomerated with a metal alloy, ceramic alloy or plastic alloy,

—having a self-sharpening effect by constant release of the diamonds,

—suitable for abrasive cutting of wafers,

—whether or not containing a hole in the centre,

—whether or not on a support

—with a weight of not more than 377 g per piece and

—with an external diameter of not more than 206 mm
0 %p/st31.12.2024
0.2755ex 6813 89 0020Friction material, of a thickness of less than 20 mm, not mounted, for use in the manufacture of friction components (1)0 %-31.12.2023
0.5931ex 6814 10 0010Agglomerated mica with a thickness of not more than 0,15 mm, on rolls, whether or not calcined, whether or not reinforced with aramid fibres0 %-31.12.2023
0.2546ex 6903 90 9040Silicon carbide reactor tubes and holders having a maximum service temperature of 1 370  °C or more0 %-31.12.2023
0.4978ex 6909 19 0020Silicon nitride (Si3N4) rollers or balls0 %-31.12.2025
0.6071ex 6909 19 0025Ceramic proppants, containing aluminium oxide, silicon oxide and iron oxide0 %-31.12.2023
0.3403ex 6909 19 0030Supports for catalysts, consisting of porous cordierite or mullite ceramic pieces, of an overall volume of not more than 65 l, having, per cm2 of the cross-section, not less than one continuous channel which may be open at both ends or stopped at one end0 %-31.12.2023
0.8028ex 6909 19 0040Ceramic-carbon absorption or adsorption cartridges of fuel motor vehicle systems, with the following characteristics:

—extruded fired ceramic bound multicellular cylindrical structure,

—5 % or more by weight but not more than 70 % by weight of activated carbon,

—30 % or more by weight but no more than 90 % by weight of ceramic binder,

—with a diameter of 29 mm or more but no more than 41 mm,

—a length of not more than 150 mm,

—fired at temperature of 800 °C or more
0 %p/st31.12.2025
0.2538ex 6909 19 00

ex 6914 90 00
50

20
Ceramic articles made of continuous filaments of ceramic oxides, containing by weight:

—2 % or more of diboron trioxide,

—28 % or less of silicon dioxide and

—60 % or more of dialuminium trioxide
0 %-31.12.2023
0.3766ex 6909 19 0060Supports for catalysts, consisting of porous ceramic pieces, of a blend of silicon carbide and silicon, with a hardness of less than 9 on the Mohs scale, with a total volume of not more than 65 litres, having, per cm2 of the surface of the cross section one or more closed channels at the tail end0 %-31.12.2023
0.4582ex 6909 19 0070Supports for catalysts or filters, consisting of porous ceramics made primarily from oxides of aluminium and titanium; with a total volume of not more than 65 litres and at least one duct (open on one or both ends) per cm2 of cross section0 %-31.12.2023
0.3404ex 6914 90 0030Ceramic microspheres, transparent, obtained from silicon dioxide and zirconium dioxide, of a diameter of more than 125 μm0 %-31.12.2024
0.6286ex 7006 00 9025Glass wafer made of borosilicate float glass

—with a total thickness variation of 1 μm or less, and

—laser-engraved
0 %p/st31.12.2024
0.7619ex 7006 00 9040Plates of sodalime or borosilicate glass of STN (Super Twisted Nematic) or TN (Twisted Nematic) quality having:

—a length of 300 mm or more but not more than 1 500  mm,

—a width of 300 mm or more but not more than 1 500  mm,

—a thickness of 0,5 mm or more but not more than 1,1 mm,

—an indium-tin-oxide coating with a resistance of 80 Ω or more, but not more than 160 Ω on one side,

—with or without a passivation layer of silicon dioxide (SiO2) between indium-tin-oxide layer and glass surface,

—with or without a multi layer anti-reflection-coating on the other side, and

—machined (chamfered) edges
0 %-31.12.2023
0.8265ex 7007 11 1010Specifically shaped and toughened safety glass:

—with a width of 200 mm or more but not more than 600 mm,

—with a height of 150 mm or more but not more than 500 mm,

for use in the manufacture of motor vehicle window assemblies (1)
0 %-31.12.2026
0.6380ex 7009 10 0030Layered glass with mechanical dimming ability by different angles of incident light comprising:

—whether or not a layer of chrome,

—a break-resistance adhesive tape or hot-melt adhesive, and

—a release film on the front side and protective paper at the back side,

of a kind used for interior rear-view mirrors of vehicles
0 %p/st31.12.2024
0.6870ex 7009 10 0040Electrochromic self-dimming inside rear-view mirror, consisting of:

—a mirror support

—a plastic casing and

—an integrated circuit

for use in the manufacture of motor vehicles of Chapter 87 (1)
0 %-31.12.2025
0.5789ex 7009 10 0050Unfinished electro-chromic auto-dimming mirror for motor vehicle rear-view mirrors:

—whether or not equipped with plastic backing plate,

—whether or not equipped with a heating element,

—whether or not equipped with Blind Spot Module (BSM) display
0 %-31.12.2027
0.3400ex 7014 00 0010Optical elements of glass (other than those of heading 7015 ), not optically worked, other than signalling glassware0 %-31.12.2023
0.3161ex 7019 12 00

ex 7019 12 00
02

22
Rovings, measuring 650 tex or more but not more than 2 500 tex, coated with a layer of polyurethane whether or not mixed with other materials0 %-31.12.2023
0.5750ex 7019 12 00

ex 7019 12 00
05

25
Rovings ranging from 1 980 to 2 033 tex, composed of continuous glass filaments of 9 μm (± 0,5 μm)0 %-31.12.2027
0.2532ex 7019 13 0010Yarn of 33 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments of a nominal diameter of 3,5 μm or of 4,5 μm, in which filaments of a diameter of 3 μm or more but not more than 5,2 μm predominate, other than those treated so as to improve their adhesion to elastomers0 %-31.12.2023
0.5749ex 7019 13 0015S-glass yarn of 33 tex or a multiple of 33 tex (± 13 %) made from continuous spun-glass filaments with fibres of a diameter of 9 μm (- 1 μm / + 1,5 μm)0 %-31.12.2027
0.5021ex 7019 13 0020Yarn of 10,3 tex or more but not more than 11,9 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate0 %-31.12.2025
0.5020ex 7019 13 0025Yarn of 5,1 tex or more but not more than 6,0 tex, obtained from continuous spun-glass filaments, in which filaments of a diameter of 4,83 μm or more but not more than 5,83 μm predominate0 %-31.12.2025
0.2535ex 7019 13 0030Yarn of E-glass of 22 tex (± 1,6 tex), obtained from continuous spun-glass filaments of a nominal diameter of 7 μm, in which filaments of a diameter of 6,35 μm or more but not more than 7,61 μm predominate0 %-31.12.2024
0.4848ex 7019 13 0050Yarn of 11 tex or a multiple thereof (± 7,5 %), obtained from continuous spun-glass filaments, containing 93 % by weight or more of silicon dioxide, of a nominal diameter of 6 μm or 9 μm, other than those treated0 %-31.12.2027
0.2872ex 7019 13 0055Glass cord impregnated with rubber or plastic, obtained from K- or U-glass filaments, made up of:

—9 % or more but not more than 16 % of magnesium oxide,

—19 % or more but not more than 25 % of aluminium oxide,

—0 % or more but not more than 2 % of boron oxide,

—without calcium oxide,

coated with a latex comprising at least a resorcinol- formaldehyde resin and chlorosulphonated polyethylene
0 %-31.12.2024
0.7056ex 7019 61 00

ex 7019 63 00
70

30
E-fibre glass fabrics:

—having a weight of 20 g/m2 or more, but not more than 214 g/m2,

—impregnated with silane,

—in rolls,

—having a humidity content by weight of 0,13 % or less, and

—having not more than 3 hollow fibres out of 100 000 fibres,

for the exclusive use in the manufacture of prepregs and copper clad laminates (1)
0 %m231.12.2026
0.7647ex 7019 64 0040Epoxy resin coated glass woven fabric containing by weight:

—91 % or more but not more than 93 % of glass fibres,

—7 % or more but not more than 9 % of epoxy resin
0 %-31.12.2023
0.4059ex 7019 71 00

ex 7019 72 00
50

50
Non-woven product of non-textile glass fibre, for the manufacture of air filters or catalysts (1)0 %-31.12.2026
0.3940ex 7019 90 0010Non-textile glass fibres in which fibres of a diameter of less than 4,6 μm predominate0 %-31.12.2023
0.3153ex 7019 90 0020Glass cord impregnated with rubber or plastic, obtained from twisted glass filament yarns, coated with a latex comprising at least a resorcinol-formaldehyde-vinylpyridine resin and an acrylonitrile-butadiene rubber (NBR)0 %-31.12.2023
0.4024ex 7019 90 0030High modulus glass cord (K) impregnated with rubber, obtained from twisted high modulus glass filament yarns, coated with a latex comprising a resorcinol-formaldehyde resin with or without vinylpyridine and/or hydrogenated acrylonitrile-butadiene rubber (HNBR)0 %-31.12.2023
0.5348ex 7020 00 10

ex 7616 99 90
10

77
Television pedestal stands with or without bracket for fixation to and stabilization of television cabinet case/body0 %p/st31.12.2026
0.7266ex 7020 00 1020Raw material for optical elements of fused silicon dioxide with:

—a thickness of 10 cm or more but not more than 40 cm and

—a weight of 100 kg or more
0 %p/st31.12.2027
0.4127ex 7201 10 1110Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm0 %-31.12.2026
0.4128ex 7201 10 3010Pig iron ingots with a length of not more than 350 mm, a width of not more than 150 mm, a height of not more than 150 mm, containing by weight not more than 1 % of silicon0 %-31.12.2026
0.33537202 50 00Ferro-silico-chromium0 %-31.12.2023
0.4853ex 7202 99 8010Ferro-dysprosium, containing by weight:

—78 % or more of dysprosium, and

—18 % or more but not more than 22 % of iron
0 %-31.12.2025
0.7502ex 7318 24 0040Tube or pipe restraint joint elements:

—of stainless steel according to specification 17-4PH or of steel according to specification tool steel S7,

—produced by metal injection moulding,

—with a rockwell hardness of 38 HRC (± 1) or 53 HRC (+ 2/– 1),

—measuring 7 mm x 4 mm x 5 mm or more, but not more than 40 mm x 20 mm x 10 mm
0 %-31.12.2023
0.4548ex 7320 90 1091Flat spiral spring of tempered steel, with:

—a thickness of 2,67 mm or more, but not more than 4,11 mm,

—a width of 12,57 mm or more, but not more than 16,01 mm,

—a torque of 18,05 Nm or more, but not more than 73,5 Nm

—an angle between the free position and the nominal position in exercise of 76° or more, but not more than 218

for use in the manufacture of tensioners for power transmission belts, for internal combustion engines (1)
0 %p/st31.12.2023
0.4126ex 7326 20 0020Metal fleece, consisting of a mass of stainless steel wires of diameters of 0,001 mm or more but not more than 0,070 mm, compacted by sintering and rolling0 %-31.12.2026
0.7891ex 7326 90 9440Steel ball neck, drop forged, machined, also heat treated or surface treated, having an angle between the centre of the conical head and the arm of less than 90° or having an angle between the centre of the ball and the arm of less than 90°, for use in the manufacture of trailer hitches for passenger cars (1)0 %-31.12.2024
0.6680ex 7326 90 98

ex 7907 00 00
40

10
Iron, steel and/or zinc alloy weights:

—with a weight of not more than 500 grams and measuring not more than 107 mm x 107 mm x 11 mm,

—whether or not with parts of other material,

—whether or not with parts of other metals,

—whether or not surface treated,

—whether or not printed,

of a kind used for the production of remote controls
0 %-31.12.2025
0.3352ex 7410 21 0010Sheet or plate of polytetrafluoroethylene, containing aluminium oxide or titanium dioxide as filler or reinforced with glass-fibre fabric, covered on both sides with copper foil0 %-31.12.2023
0.7509ex 7410 21 0020Foils, rolls composed of one layer of glass epoxy of 100 μm colaminated with refined copper foil on one or two sides of 35 μm with a tolerance of 10 % for use in the production of smart cards (1)0 %m231.12.2023
0.3005ex 7410 21 0030Film of polyimide, whether or not containing epoxide resin and/or glass fibre, covered on one side or on both sides with a copper foil0 %-31.12.2023
0.3926ex 7410 21 0040Sheet or plates:

—consisting of at least a central layer of paper or one central sheet of any type of nonwoven fibre, laminated on each side with glass-fibre fabric and impregnated with epoxide resin, or

—consisting of multiple layers of paper, impregnated with phenolic resin,

coated on one or both sides with a copper film with a maximum thickness of 0,15 mm
0 %-31.12.2023
0.4479ex 7410 21 0050Plates:

—consisting of at least one layer of fibreglass fabric impregnated with thermosetting resin,

—covered on one or both sides with copper foil with a thickness of not more than 0,15 mm, and

—with a dielectric constant (DK) of less than 3,9 and a loss factor (Df) of less than 0,015 at a measuring frequency of 10 GHz, as measured according to IPC-TM-650
0 %-31.12.2023
0.7341ex 7413 00 0020Loudspeaker centring ring, consisting of one or more vibration dampers and minimum two non-insulated copper cables, therein woven or pressed0 %-31.12.2027
0.2447ex 7419 80 90

ex 7616 99 90
91

60
Disc (target) with deposition material, consisting of molybdenum silicide:

—containing 1mg/kg or less of sodium and

—mounted on a copper or aluminium support
0 %-31.12.2023
0.7911ex 7506 20 0010Sheets and strips in coils of nickel alloy C276 (EN 2.4819) with

—a thickness of 0,5 mm or more but not more than 3 mm,

—a width of 770 mm or more but not more than 1 250  mm
0 %-31.12.2024
0.7913ex 7506 20 0020Sheets and strips in coils of nickel alloy to standard ASME SB-582/UNS N06030 with:

—a thickness of 0,5 mm or more but not more than 3 mm,

—a width of 250 mm or more but not more than 1 219  mm
0 %-31.12.2025
0.58907601 20 30

7601 20 40
Slabs and billets of unwrought aluminium alloys4 %-31.12.2023
0.7752ex 7604 21 0010Hollow profile with:

—one closed chamber of aluminum alloy 6063-T5 or 6060-T5,

—a wall thickness of not more than 0,7 mm, and

—an anodized layer of 10 μm at the surface,

for use in the manufacture of board frames of whiteboards, cork boards, easel boards, education boards and display cases (1)
0 %-31.12.2024
0.5029ex 7604 29 10

ex 7606 12 99

ex 7606 12 99
10

21

25
Sheets and bars of aluminium-lithium alloys0 %-31.12.2027
0.6417ex 7604 29 1040Bars and rods of aluminium alloys containing by weight :

—0,25 % or more but not more than 7 % of zinc, and

—1 % or more but not more than 3 % of magnesium, and

—1 % or more but not more than 5 % of copper, and

—not more than 1 % of manganese

consistent with the material specifications AMS QQ-A-225, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process
0 %-31.12.2024
0.2410ex 7605 19 0010Not alloyed aluminium wire, of a diameter of 2 mm or more but not more than 6 mm, covered with a layer of copper of a thickness of 0,032 mm or more but not more than 0,117 mm0 %-31.12.2023
0.8344ex 7605 21 0010Aluminium alloy wire with a diameter of 9,50 mm or more but not more than 19,15 mm, in coils, for use in the manufacture of aeronautical fasteners (1)0 %-31.12.2027
0.6418ex 7605 29 0010Wire of aluminium alloys containing by weight:

—0,10 % or more but not more than 5 % of copper, and

—0,2 % or more but not more than 6 % of magnesium, and

—0,10 % or more but not more than 7 % of zinc, and

—not more than 1 % of manganese,

consistent with the material specifications AMS QQ-A-430, of a kind used in aerospace industry (inter alia conforming NADCAP and AS9100) and obtained by rolling mill process
0 %m31.12.2024
0.7698ex 7607 20 9910Aluminium foil, in rolls:

—coated on one side with polypropylene or polypropylene and acid-modified polypropylene and on the other with polyamide and polyethylene terephthalate, with adhesive layers between them,

—with a width of 200 mm or more, but not more than 400 mm,

—with a thickness of 0,138 mm or more, but not more than 0,168 mm,

for use in the manufacture of lithium-ion battery cell covers (1)
3.7 %-31.12.2023
0.7746ex 7608 20 8120Seamless aluminium alloyed extruded tubes (Aluminum 6061F according to standard ASTM B241) with:

—an outer diameter of 320 mm or more but not more than 400 mm, and

—a wall thickness of 8 mm or more but not more than 10 mm,

for use in the manufacture of high pressure vessels (1)
0 %-31.12.2024
0.6138ex 7608 20 8930Seamless aluminium alloyed extruded tubes with:

—an outer diameter of 60 mm or more but not more than 420 mm, and

—a wall thickness of 10 mm or more but not more than 80 mm
0 %-31.12.2023
0.7747ex 7608 20 8940Seamless flow forming aluminium alloyed tubes (Aluminum 6061A according to standard ISO 7866) with:

—an outer diameter of 378 mm or more but not more than 385 mm, and

—a wall thickness of 4 mm or more but not more than 7 mm

for use in the manufacture of high pressure vessels (1)
0 %-31.12.2024
0.8194ex 7609 00 00

ex 8415 90 00
30

45
Aluminium connecting block for automotive air conditioning systems:

—with a T6 hardening,

—equipped with round stubs with a circumferential outer groove,

—with through or non-through holes, made of profiles with an upper radius of 8 mm or more but not more than 11 mm, and a lower radius of 12 mm or more but not more than 17 mm,

—with a distance between holes of 15 mm or more but not more than 22 mm,
0 %-31.12.2026
—with sockets designed for brazing or clamping,

—with mounting holes for M6 or M8 mounting screw, threaded or not,

—with a width of 5 mm or more but not more than 16 mm,

—for connecting a compressor, a condenser, an evaporator, a chiller and other lines
0.2445ex 7613 00 0020Aluminium container, seamless, for compressed natural gas or compressed hydrogen, wholly embedded in an overwrap of epoxy-carbon fibres composite, of a storage capacity of 172 l (± 10 %) and an unfilled weight of not more than 64 kg0 %p/st31.12.2023
0.3928ex 7616 99 9015Honeycomb aluminium blocks for use in the manufacture of aircraft parts (1)0 %p/st31.12.2023
0.6534ex 7616 99 9025Metallised film:

—consisting of eight or more layers of aluminium (CAS RN 7429-90-5) of a purity of 99,8 % or more,

—with an optical density of each aluminium layer of not more than 3.0,

—with each aluminium layer separated by a resin layer,

—on a carrier film of PET, and

—on rolls of up to 50 000 metres in length
0 %-31.12.2024
0.7997ex 7616 99 9035Aluminum plate with:

—a length of 36 mm or more but not more than 49 mm,

—a width of 29,8 mm or more but not more than 45,2 mm,

—a thickness of 0,18 mm or more but not more than 0,66 mm,

equipped with a polypropylene tape with:

—a length of 6,5 mm or more but not more than 16,5 mm,

—a width of 39 mm or more but not more than 56 mm,

—characteristic allowing to create solid joint with Pouch external layer by melting process assuring leak and pressure proof sealing of Cell,

—resistance to influence of electrolyte,

for use in the manufacture of lithium-ion battery cells for motor vehicle batteries (1)
3 %-31.12.2023
0.5357ex 7616 99 90

ex 8482 80 00

ex 8807 30 00
70

10

40
Connecting components for use in the production of helicopter tail rotor shafts (1)0 %p/st31.12.2026
0.6730ex 8101 96 0010Tungsten wire containing by weight 99 % or more of tungsten with:

—a maximum cross-sectional dimension of not more than 50 μm

—a resistance of 40 Ω or more but not more than 300 Ω at length of 1 metre
0 %-31.12.2025
0.7245ex 8101 96 0020Tungsten wire

—containing by weight 99,95 % or more of tungsten, and

—with a maximum cross-sectional dimension of not more than 1,02 mm
0 %-31.12.2027
0.5694ex 8102 10 0010Molybdenum powder with:

—a purity by weight of 99 % or more and

—a particle size of 1,0 μm or more, but not more than 5,0 μm
0 %-31.12.2027
0.5097ex 8104 30 0035Magnesium powder:

—of purity by weight of more than 99,5 %, and

—with a particle size of not more than 0,8 mm
0 %-31.12.2025
0.3417ex 8104 90 0010Ground and polished magnesium sheets, of dimensions not more than 1 500  mm × 2 000  mm, coated on one side with an epoxy resin insensitive to light0 %-31.12.2023
0.5838ex 8105 90 0010Bars or wires made of cobalt alloy containing, by weight:

—35 % (± 2 %) cobalt,

—25 % (± 1 %) nickel,

—19 % (± 1 %) chromium and

—7 % (± 2 %) iron,

conforming to the material specifications AMS 5842
0 %-31.12.2023
0.3416ex 8108 20 0010Titanium sponge0 %-31.12.2023
0.4553ex 8108 20 0030Titanium powder of which 90 % by weight or more passes through a sieve with an aperture of 0,224 mm0 %-31.12.2023
0.3211ex 8108 30 0010Waste and scrap of titanium and titanium alloys, except those containing by weight 1 % or more but not more than 2 % of aluminium0 %-31.12.2023
0.4363ex 8108 90 3010Titanium alloy rods complying with standard EN 2002-1, EN 4267 or DIN 650400 %-31.12.2024
0.7330ex 8108 90 3015Rods and wire of an alloy of titanium with:

—a uniform solid cross-section in the form of a cylinder,

—with a diameter of 0,8 mm or more, but not more than 5 mm,

—an aluminium content by weight of 0,3 % or more, but not more than 0,7 %,

—a silicon content by weight of 0,3 % or more, but not more than 0,6 %,

—a niobium content by weight of 0,1 or more, but not more than 0,3 %, and

—an iron content by weight of not more than 0,2 %
0 %-31.12.2027
0.7942ex 8108 90 3035Bars and wires of titanium with a titanium content of 98,8 % or more but not more than 99,9 % of a diameter less than 20 mm0 %-31.12.2025
0.4904ex 8108 90 3045Titanium-aluminium-vanadium alloy (TiAl6V4) wire, of a diameter less than 20 mm and complying with AMS standards 4928, 4965 or 49670 %-31.12.2025
0.8105ex 8108 90 3055Wires of an alloy of titanium:

—with a niobium content by weight of 42 % or more, but not more than 47 %,

—with a diameter of 2,36 mm or more, but not more than 7,85 mm,

—in coils of 15 kg or more, but not more than 45 kg,

—complying with standard AMS 4982
0 %-31.12.2025
0.7077ex 8108 90 3060Forged cylindrical bars of titanium with:

—a purity of 99,995 % by weight or more,

—a diameter of 140 mm or more but not more than 200 mm,

—a weight of 5 kg or more but not more than 300 kg
0 %p/st31.12.2026
0.5351ex 8108 90 3070Wire of an titanium alloy containing by weight:

—22 % (± 1 %) of vanadium, and

—4 % (± 0,5 %) of aluminium

or

—15 % (± 1 %) of vanadium,

—3 % (± 0,5 %) of chromium,

—3 % (± 0,5 % of tin and

—3 % (± 0,5 %) of aluminium
0 %-31.12.2026
0.7285ex 8108 90 5045Cold or hot rolled plates, sheets and strips of non-alloyed titanium with:

—a thickness of 0,4 mm or more, but not more than 100 mm,

—a length of not more than 14 m, and

—a width of not more than 4 m
0 %-31.12.2027
0.5352ex 8108 90 5055Plates, sheets, strip and foil of an alloy of titanium0 %-31.12.2026
0.6524ex 8108 90 5080Plates, sheets, strips and foil of non-alloyed titanium

—of a width of more than 750 mm,

—of a thickness of not more than 3 mm
0 %-31.12.2024
0.6500ex 8108 90 5085Strip or foil of non-alloyed titanium:

—containing more than 0,07 % by weight of oxygen (O2),

—of a thickness of 0,4 mm or more but not more than 2,5 mm

—conforming to the Vickers hardness HV1 standard of not more than 170

of a kind used in the manufacture of welded tubes for nuclear power plant condensers
0 %-31.12.2024
0.5353ex 8108 90 90

ex 9003 90 00
30

20
Parts of spectacle frames and mountings, including

—temples,

—blanks of a kind used for the manufacture of spectacle parts and

—bolts of the kind used for spectacle frames and mountings,

of a titanium alloy
0 %p/st31.12.2026
0.2515ex 8109 21 00

ex 8109 29 00
10

10
Non-alloy zirconium sponges or ingots, containing by weight more than 0,01 % of hafnium for use in the manufacture of tubes, bars or ingots enlarged by remelting for the chemical industry (1)0 %-31.12.2023
0.3415ex 8110 10 0010Antimony in the form of ingots0 %-31.12.2023
0.3413ex 8112 99 5010Alloy of niobium (columbium) and titanium, in the form of bars and rods0 %-31.12.2023
0.5354ex 8113 00 2010Cermet blocks containing by weight 60 % or more of aluminium and 5 % or more of boron carbide0 %-31.12.2023
0.4316ex 8113 00 9010Carrier plate of aluminium silicon carbide (AlSiC-9) for electronic circuits0 %-31.12.2027
0.6805ex 8113 00 9020Cuboid spacer made of aluminium silicon carbide (AlSiC) composite used for packaging in IGBT-modules0 %-31.12.2025
0.6416ex 8207 19 1010Inserts for drilling tools with working parts of agglomerated diamonds0 %p/st31.12.2024
0.5570ex 8207 30 1010Set of transfer and/or tandem press tools for cold-forming, pressing, drawing, cutting, punching, bending, calibrating, bordering and throating of metal sheets, for use in the manufacture of frame parts or body parts of motor vehicles (1)0 %p/st31.12.2027
0.7693ex 8301 20 0010Mechanical or electromechanical steering column lock:

—with a height of 10,5 cm (± 3 cm),

—with a width of 6,5 cm (± 3 cm),

—in a metal housing,

—whether or not with a holder,

for use in the manufacture of goods of Chapter 87 (1)
0 %-31.12.2023
0.5024ex 8301 60 00

ex 8419 90 85

ex 8479 90 70

ex 8481 90 00

ex 8485 90 90

ex 8503 00 99

ex 8515 90 80

ex 8537 10 98

ex 8538 90 99

ex 8708 99 10

ex 8708 99 97
30

40

30

50

30

43

40

55

70

55

22
Silicone or plastic keyboards, comprising:

—parts of common metal, and

—whether or not comprising parts of plastic,

—epoxy resin reinforced with fiberglass or wood,

—whether or not printed or surface-treated,

—with or without electrical conductors,

—with or without a membrane bonded to the keyboard,

—with or without mono or multilayer protective film
0 %p/st31.12.2025
0.8247ex 8302 10 0020Armrest hinge made of magnesium with:

—a length of 255 mm or more but not more than 265 mm,

—a width of 155 mm or more but not more than 165 mm,

—a height of 115 mm or more but not more than 125 mm,

—mounting holes for a lock mechanism
0 %-31.12.2026
0.7666ex 8302 30 0010Support bracket for an exhaust system:

—with a thickness of 0,7 mm or more but not more than 1,3 mm,

—of stainless steel class 1.4310 and 1.4301 according to norm EN 10088,

—whether or not with mounting holes,

for use in the manufacture of exhaust systems for automobiles (1)
0 %-31.12.2023
0.8304ex 8302 30 0020Two cold-formed steel supports:

—with a length of 160 mm or more but not more than 180 mm,

—with a width of 60 mm or more but not more than 80 mm,

—with a height of 60 mm or more but not more than 80 mm,

—with a movable riveted connection,

—with or without elastomeric bumper,

—forming a mechanism for indirect movement of the mechanism of the longitudinal positioner of car seats, interacting with the safety latch,

—attached to the mechanism of the longitudinal positioner by means of a detachable screw connection, riveting, welding or spot welding
0 %-31.12.2026
0.2602ex 8309 90 9010Aluminium can ends:

—with a diameter of 99,00 mm or more but not more than 136,5 mm (±1 mm),

—whether or not with a “ring-pull” aperture
0 %p/st31.12.2023
0.3947ex 8401 30 0020Non-irradiated hexagonal fuel modules (elements) for use in nuclear reactors (1)0 %-31.12.2023
0.6319ex 8401 40 0010Stainless steel absorber control rods, filled with neutron absorbing chemical elements0 %p/st31.12.2024
0.8012ex 8406 82 0010Industrial steam turbine with:

—an output of 5 MW or more but not more than 40 MW,

—designed for a pressure of not more than 140 bar and a temperature of not more than 540 C,

—equipped with double seat valves on the live steam side which are operated with a hydraulic servo of not more than 12 bar
0 %-31.12.2025
0.3830ex 8407 33 20

ex 8407 33 80

ex 8407 90 80

ex 8407 90 90
10

10

10

10
Spark-ignition reciprocating or rotary internal combustion piston engines, having a cylinder capacity of not less than 300 cm3 and a power of not less than 6 kW or more but not more than 20,0 kW, for the manufacture of:

—lawn mowers of subheadings 8433 11 , 8433 19 and 8433 20 ,

—tractors of subheadings 8701 91 90 , 8701 92 90 whose main function is that of a lawn mower,

—four stroke mowers with motor of a cylinder capacity of not less than 300 cm3 of subheading 8433 20 10 or

—snowploughs and snow blowers of subheading 8430 20  (1)
0 %-31.12.2027
0.8260ex 8407 34 1010Spark-ignition reciprocating or rotary internal combustion piston engines, with:

—a cylinder capacity of 1 200 cm3 or more but not more than 2 000 cm3

—a power of 95 kW but not more than 135 kW,

—a weight of not more than 120 kg,

for use in the manufacture of motor vehicles of 8703  (1)
0 %-31.12.2026
0.3828ex 8407 90 1010Four-stroke petrol engines of a cylinder capacity of not more than 250 cm3 for use in the manufacture of garden equipment of heading 8432 , 8433 , 8436 or 8508  (1)0 %-31.12.2026
0.8403ex 8407 90 1040A power unit with a two-stroke engine with:

—an output of 900 W or more, but not more than 1 100 W,

—a cylinder displacement of more than 24 cm3 but not more than 30 cm3,

—a rotation speed of more than 8 400 rpm but not more than 8 600 rpm at maximum power,

—an idling speed of more than 2 800 rpm but not more than 3 200 rpm, and

—a fuel tank with a capacity of 0,5 l or more,

for use in the manufacture of garden machinery and garden machinery components (1)
0 %-31.12.2027
0.4996ex 8407 90 9020Compact Liquid Petroleum Gas (LPG) Engine System, with:

—6 cylinders,

—an output of 75 kW or more, but not more than 80 kW,

—inlet and exhaust valves modified to operate continuously in heavy duty applications,

for use in the manufacture of vehicles of heading 8427  (1)
0 %-31.12.2025
0.2598ex 8408 90 4120Diesel engines of a power of not more than 15 kW, with 2 or 3 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1)0 %-31.12.2023
0.2595ex 8408 90 4320Diesel engines of a power of not more than 30 kW, with 4 cylinders, for use in the manufacture of vehicle mounted temperature control systems (1)0 %-31.12.2023
0.5544ex 8408 90 43

ex 8408 90 45

ex 8408 90 47
40

30

50
4 Cylinder, 4 cycle, liquid cooled, compression-ignition engine having:

—a capacity of not more than 3 850 cm3, and

—a rated output of 15 kW or more but not more than 85 kW,

for use in the manufacture of vehicles of heading 8427  (1)
0 %-31.12.2024
0.8300ex 8408 90 65

ex 8408 90 67

ex 8408 90 81
20

20

20
Compression-ignition internal combustion piston engines:

—of the inline type,

—with a cylinder capacity of 7 100  cm3 or more but not more than 18 000  cm3,

—with a power of 205 kW or more but not more than 597 kW,

—with an exhaust after-treatment module,

—with external width/height/depth dimensions of not more than 1 310 /1 300 /1 040  mm or 2 005 /1 505 /1 300  mm or 2 005 /1 505 /1 800  mm,

for use in the manufacture of crushing, screening or separation machines (1)
0 %-31.12.2026
0.7670ex 8409 91 0025Air intake module for engine cylinders consisting of:

—a suction pipe,

—a pressure sensor,

—an electric throttle,

—hoses,

—brackets,

for use in the manufacture of engines of motor vehicles (1)
0 %-31.12.2023
0.8216ex 8409 91 0035Fuel distribution pipe complete consisting of rail pipe, high pressure sensor and injectors for direct gasoline fuel injection with:

—an operating pressure of not more than 22,5 MPa,

—solenoid direct injector,

—analog pressure sensor for not more than 22,5 MPa
0 %-31.12.2026
0.7027ex 8409 91 0040Fuel injector with solenoid valve for optimized atomization in the combustion chamber for use in the manufacture of spark-ignition internal combustion piston engines of motor vehicles (1)0 %-31.12.2026
0.7234ex 8409 91 00

ex 8409 99 00
45

70
Metal alloy intake and exhaust valve, with a Rockwell hardness HRC 20 or more, for use in the manufacture of spark or compression ignition engines of motor vehicles (1)0 %-31.12.2026
0.6752ex 8409 91 00

ex 8409 99 00
50

55
Exhaust manifold with turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 181 mm0 %p/st31.12.2023
0.7667ex 8409 91 00

ex 8409 99 00
53

65
The exhaust gas recirculation assembly consisting of:

—a control unit,

—an air throttle,

—an intake pipe,

—an outlet hose,

for use in the manufacture of spark-ignition or compression-ignition combustion engines of motor vehicles (1)
0 %-31.12.2023
0.7961ex 8409 91 00

ex 8481 90 00
55

60
Nozzle body for the regulation of angle and distribution of fuel injection:

—of a cylindrical shape,

—made of stainless steel,

—with 4 or more, but not more than 16 holes,

—with a flow rate of 100 cm3/minute or more, but not more than 500 cm3/minute
0 %-31.12.2025
0.7661ex 8409 91 0070Inlet manifold, exclusively for use in the manufacture of the motor vehicles with:

—a width of 40 mm or more but not more than 70 mm,

—valves length of 250 mm or more but not more than 350 mm,

—air volume of 5,2 litres, and

—an electrical flow control system that provides maximum performance at more than 3200 rpm (1)
0 %-31.12.2023
0.7965ex 8409 91 0075Housing of fuel injection valve for generating an electromagnetic field to actuate the injection valve with:

—an inlet diameter of 2 mm or more, but not more than 10 mm,

—an outlet diameter of 2 mm or more, but not more than 10 mm,

—an electric coil with a resistance of 10 Ω or more, but not more than 15 Ω, which ends in an electrical connection,

—a plastic covering moulded around a stainless steel tube
0 %-31.12.2025
0.7967ex 8409 91 00

ex 8481 90 00
80

70
Nozzle needle for opening and closing the flow of fuel in the engine, with:

—2 holes,

—4 grooves,

—a diameter of 3 mm or more, but not more than 6 mm,

—a length of 25 mm or more, but not more than 35 mm,

—made of stainless steel with hard-chrome plating
0 %-31.12.2025
0.8244ex 8409 91 0085Cylinder head blank for a four cylinder engine with 10 cores, made of aluminium alloy EN AC-45500, with:

—no other components,

—a hardness of 52 HRB or more,

—casting defects size of not more than 0,4 mm and not more than 10 defects per cm2,

—a dendrite arm space in combustion chamber of not more than 25 μm,

—a double deck water jacket design and

—a weight of 18 kg or more but not more than 19 kg,

—a length of 506 mm or more but not more than 510 mm,
0 %p/st31.12.2026
—a height of 282 mm or more but not more than 286 mm,

—a width of 143,7 mm or more but not more than 144,3 mm,

in one single consignment of 1 000 pieces or more
0.5199ex 8409 99 00

ex 8479 90 70
10

85
Injectors with solenoid valve for optimised atomisation in the engine combustion chamber0 %p/st31.12.2026
0.7851ex 8409 99 0025Hoses assembly for fuel return from injectors to engine fuel unit consisting of at least:

—three rubber hoses, whether or not with a protective braided sleeving,

—three connectors for connecting fuel injectors,

—five metal clamps,

—one T-shaped plastic joint,

for use in the manufacture of engines of motor vehicles (1)
0 %-31.12.2024
0.7718ex 8409 99 0075High pressure fuel rail of galvanised ferrite-pearlite steel with:

—at least one pressure sensor and one valve,

—a length of 314 mm or more but not more than 322 mm,

—an operating pressure not more than 225 MPa,

—an inlet temperature not more than 95 °C,

—ambient temperature of -45 °C or more but not more than 145 °C,

for use in the manufacture of compression ignition engines of motor vehicles (1)
0 %-31.12.2024
0.6751ex 8411 99 0020Wheel-shaped gas turbine component with blades, of a kind used in turbochargers:

—of a precision-cast nickel based alloy complying with standard DIN G- NiCr13Al6MoNb or DIN G- NiCr13Al16MoNb or DIN G- NiCo10W10Cr9AlTi or DIN G- NiCr12Al6MoNb or AMS AISI:686,

—with a heat-resistance of not more than 1 100  °C,

—with a diameter of 28 mm or more, but not more than 180 mm,

—with a height of 20 mm or more, but not more than 150 mm
0 %p/st31.12.2027
0.7225ex 8411 99 0030Turbine housing of turbochargers, with a hole to insert a turbine wheel, whereby the hole has a diameter of 28 mm or more, but not more than 181 mm0 %p/st31.12.2026
0.5975ex 8412 39 0020Actuator for a single-stage turbocharger, with:

—a pressure inlet pipe and a control rod with a working stroke of 15 mm or more but not more than 40 mm,

—a maximum length of the actuator including control rod of not more than 400 mm,

—a maximum diameter of the can at the widest point of not more than 140 mm, and

—a maximum height of the can without control rod of not more than 140 mm
0 %p/st31.12.2023
0.8148ex 8412 90 8020Bedplate made of solution strengthened ductile iron castings (SSDI), for anchoring and aligning the drive train (gearbox, pedestal bearing, rotor shaft) of a wind turbine with:

—a length of 3,5 m or more but not more than 4,5 m,

—a width of 2 m or more but not more than 4,2 m,

—a height of 1 m or more, but not more than 1,3 m,

—a weight of 11 tons or more but not more than 21,5 tons,

—mounting bores for yawdrive,

—a mounting flange for gearbox support,

—drivetrain mount,

—different screw sockets
0 %p/st31.12.2027
0.8079ex 8412 90 8030Gearbox support used as a support and load-carrying component between the gearbox and the bedplate of a wind turbine, made of solution strengthened ductile iron castings (SSDI), with:

—a diameter of 2 m or more, but not more than 5 m,

—a weight of 2 tons or more but not more than 7 tons
0 %p/st31.12.2025
0.7161ex 8413 30 2030Single-cylinder radial-piston high pressure pump for gasoline direct injection with:

—an operating pressure of 200 bar or more, but not more than 350 bar,

—a flow control, and

—a pressure relief valve,

for use in the manufacture of engines of motor vehicles (1)
0 %-31.12.2026
0.7969ex 8413 30 2040High-pressure plunger pump for direct diesel injection, with:

—an operating pressure of not more than 275 MPa,

—a camshaft,

—a fluid discharging of 15 cm3 per minute or more, but not more than 1 800 cm3 per minute,

—an electric pressure regulating valve
0 %-31.12.2025
0.7970ex 8413 30 2050High-pressure plunger pump for direct diesel injection:

—with an operating pressure of not more than 275 MPa,

—designed to contact the crankshaft,

—with an electromagnetic valve
0 %-31.12.2025
0.8215ex 8413 30 2060High-pressure plunger pump for direct petrol injection:

—with an operating pressure of not more than 90 MPa,

—designed to contact the crankshaft,

—with an electromagnetic valve
0 %-31.12.2026
0.8332ex 8413 30 8020Electric water pump ensuring the functionality of the water circuit also when the motor is temporarily switched off, for operating DC voltage of 9 V or more but not more than 16 V, with:

—capacity - pressure 0,075 MPa at 3 800 rpm,

—discharge of 12 l/min,

—whether or not with connecting cable with connector, and

—mounting bracket,

for use in the manufacture of goods of Chapter 87 (1)
0 %-31.12.2027
0.8185ex 8413 70 5120Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft and volute with integrated heater of nominal power of 1 800 W and soldered safety devices, monobloc with the motor, with:

—a discharge outlet diameter of 20 mm or more,

—9 slots stator,

—6 pole rotor,

—rated power of 95 W,

—volute with straight outlet,

—rotor chamber without sand filter
0 %-31.12.2026
0.8186ex 8413 70 5130Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft and volute with integrated heater of nominal power of 1 800 W and soldered safety devices, monobloc with the motor, with:

—a discharge outlet diameter of 20 mm or more,

—9 slots stator,

—6 pole rotor,

—rated power of 95 W,

—volute with clamped rubber hose outlet,

—rotor chamber without sand filter
0 %-31.12.2026
0.8187ex 8413 70 5140Electric brushless direct current motor with single-stage, radial flow pump centrifugal single entry impeller mounted on motor's shaft, monobloc with the motor, volute with integrated heater, with:

—a discharge outlet diameter of 20 mm or more,

—9 slots square or chain pole stator,

—6 pole rotor,

—ferritic or rare earth magnets,

—rated power of 95 W or 80 W,

—heater of nominal power of 1 800 W and soldered or laser welded safety, devices,

—volute with or without clamped rubber outlet,

—rotor chamber with ultrasonic welded sand filter
0 %-31.12.2026
0.6346ex 8413 91 0030Fuel pump cover:

—consisting of aluminium alloys,

—with a diameter of 38 mm or 50 mm,

—with two concentric, annular grooves formed on its surface,

—anodized,

of a kind used in motor vehicles with petrol engines
0 %p/st31.12.2024
0.7669ex 8414 10 2530Tandem pump consisting of:

—an oil pump with displacement of 21,6 cc/rev (± 2 cc/rev) and working pressure 1,5 bar at 1 000 revolutions per minute,

—vacuum pump with displacement of 120 cc/rev (± 12 cc/rev) and performance of -666 mbar in 6 seconds at 750 revolutions per minute

for use in the manufacture of engines of motor vehicles (1)
0 %-31.12.2023
0.7691ex 8414 10 8930Electric vacuum pump with:

—Controller Area Network (CAN bus),

—whether or not with a rubber hose,

—a connecting cable with connector,

—a mounting bracket,

for use in the manufacture of goods of Chapter 87 (1)
0 %-31.12.2023
0.8111ex 8414 30 2020Hermetic reciprocating refrigeration compressor, for isobutane:

—with a 3-phase permanent magnet brushless motor,

—having left side suction connection and Power Factor Correction (PFC) inverter,

—with a maximum cooling capacity of 150 W or more but not more than 240 W, at ASHRAE conditions
0 %-31.12.2025
0.8112ex 8414 30 2030Hermetic reciprocating refrigeration compressor for isobutane as refrigerant:

—with a 3-phase permanent magnet brushless motor,

—having left side suction connection and Power Factor Correction (PFC) inverter feasible to work from 1 300 rpm up to 4 500 rpm,

—with a maximum cooling capacity of 150 W or more but not more than 240 W, at ASHRAE conditions
0 %-31.12.2025
0.8134ex 8414 30 2040Hermetic reciprocating compressor, for isobutane as refrigerant with:

—a Resistance Start Capacitor Run (RSCR) single phase motor,

—a general coefficient of performance factor not lower than 1,93 at ASHRAE conditions,

—a maximum cooling capacity of 150 W or more but not more than 180 W, at ASHRAE conditions
0 %-31.12.2025
0.8135ex 8414 30 2050Hermetic reciprocating compressor, for isobutane as refrigerant with:

—a Resistance Start Capacitor Run (RSCR) single phase motor,

—a general coefficient of performance factor not higher than 1,5 at ASHRAE conditions,

—a maximum cooling capacity of 150 W or more but not more than 180 W, at ASHRAE conditions
0 %-31.12.2025
0.4727ex 8414 30 8150Hermetic or semi-hermetic variable-speed electric scroll compressors, with a nominal power rating of 0,5 kW or more but not more than 10 kW, with a displacement volume of not more than 35 cm3, of the type used in refrigeration equipment0 %-31.12.2024
0.6160ex 8414 30 81

ex 8414 80 73
60

30
Hermetic rotary compressors for either hydrofluorocarbon (HFC) or hydrocarbon refrigerants:

—driven by ‘on-off’ single phase alternate current (AC) or ‘brushless direct current’ (BLDC) variable speed motors,

—with a nominal power rating of not more than 1,5 kW,

—a rated voltage of 100 V or more but not more than 240 V,

—with a height of not more than 300 mm,

—an external diameter of not more than 150 mm,

—with a unit weight of not more than 15 kg,

for use in the manufacture of heat pumps for household appliances, including clothes dryers (1)
0 %-31.12.2023
0.2593ex 8414 30 8920Vehicle air conditioning system part, consisting of an open shaft reciprocating compressor of a power of more than 0,4 kW but not more than 10 kW0 %-31.12.2023
0.7694ex 8414 30 8930Open shaft, scroll type compressor with clutch assembly, of a power of more than 0,4 kW, for air conditioning in vehicles, for use in the manufacture of motor vehicles of Chapter 87 (1)0 %-31.12.2023
0.7595ex 8414 59 3520Radial fan, with:

—a dimension of 25 mm (height) x 85 mm (width) x 85 mm (depth),

—a weight of 120 g,

—a rated voltage of 13,6 VDC (direct current voltage),

—an operating voltage of 9 VDC or more but not more than 16 VDC (direct current voltage),

—a rated current of 1,1 A (TYP),

—a rated power of 15 W,

—a rotation speed of 500 RPM (revolutions per minute) or more but not more than 4800 RPM (revolutions per minute) (free flow),

—an air flow of not more than 17,5 litre/s,

—an air pressure of not more than 16 mm H2O ≈ 157 Pa,
0 %-31.12.2023
—an overall sound pressure of not more than 58 dB(A) at 4800 RPM (revolutions per minute), and

with a FIN (Fan Interconnect Network) interface for communication with the heating and air-conditioning control unit used in car seat ventilation systems
0.8207ex 8414 59 3530Electric blower for cooling the high-voltage battery of a hybrid passenger car with:

—a control unit,

—MOSFET inverter,

—a voltage of 9 V or more but not more than 16 V,

—ambient temperature of – 40 °C or more, but not more than 80 °C,

for use in the manufacture of hybrid passenger cars (1)
0 %-31.12.2026
0.7317ex 8414 80 2220Air membrane compressor with:

—a flow of 4,5 l/min or more, but not more than 12 l/min,

—power input of not more than 14 W, and

—a gauge pressure capacity not exceeding 400 hPa (0,4 bar),

of a kind used in the production of motor vehicle seats
0 %-31.12.2027
0.8133ex 8414 80 7350Hermetic heat pump compressor, for R134A or R450A as refrigerant:

—not charged with refrigerant,

—pre-charged with the lubricant oil,

—with the Single Phase Induction Motor PSC (Permanent Split Capacitor),

—having bottom side suction connection and top side discharge connection,
0 %-31.12.2025
—with displacement 8,05 cm3 or higher, but not higher than 8,25 cm3,

—running at 2 800 rpm or faster, but not faster than 3 100 rpm, and

—with a cooling capacity of 920 W or higher, but not higher than 990 W in ASHRAE conditions
0.2507ex 8414 90 0020Aluminium pistons, for incorporation into compressors of air conditioning machines of motor vehicles (1)0 %p/st31.12.2024
0.3386ex 8414 90 0030Pressure-regulating system, for incorporation into compressors of air conditioning machines of motor vehicles (1)0 %p/st31.12.2023
0.4027ex 8414 90 0040Drive part, for compressors of air conditioning machines of motor vehicles (1)0 %p/st31.12.2023
0.6842ex 8415 90 0060Flame-soldered aluminium block, for connecting tube with condenser in car air-conditioning systems, with:

—extruded, bent connector lines of aluminium with an external diameter of 5 mm or more, but not more than 25 mm,

—a weight of 0,02 kg or more but not more than 0,25 kg
0 %p/st31.12.2025
0.6860ex 8415 90 0065Aluminium arc-welded removable receiver dryer, with polyamide and ceramic elements with:

—a length of 143 mm or more but not more than 292 mm,

—a diameter of 31 mm or more but not more than 99 mm,

—with a weight of not less than 0,12 kg and not more than 0,9 kg,

—a spangle length of not more than 0,2 mm and a thickness of not more than 0,06 mm, and

—a solid particle diameter of not more than 0,06 mm,

for use in the manufacture of car air-conditioning systems (1)
0 %p/st31.12.2024
0.7996ex 8418 99 9020Aluminium connecting block for connecting to a condenser manifold in welding process:

—hardened to T6 or T5 temper,

—with a weight of not more than 150 g,

—with a length of 20 mm or more but not more than 150 mm,

—with a fixing rail in one piece
0 %p/st31.12.2025
0.8004ex 8418 99 9030Receiver dryer profile for connecting to a condenser manifold in welding process with:

—a braze flatness of not more than 0,2 mm,

—a weight of 100 g or more but not more than 600 g,

—a fixing rail in one piece
0 %p/st31.12.2025
0.6231ex 8421 21 0020Water pre-treatment system comprising one or more of the following elements, whether or not incorporating modules for sterilization and sanitization of these elements:

—ultrafiltration system

—carbon filtration system

—water softener system

for use in a biopharmaceutical laboratory
0 %p/st31.12.2024
0.3375ex 8421 99 9091Parts of equipment, for the purification of water by reverse osmosis, consisting of a bundle of hollow fibres of artificial plastic material with permeable walls, embedded in a block of artificial plastic material at one end and passing through a block of artificial plastic material at the other end, whether or not housed in a cylinder0 %p/st31.12.2023
0.6193ex 8431 20 0040Aluminium core, plastic tank radiator, with integral steel support structure and an open core square wave design of 9 fins per 2,54 cm of core length for use in the manufacture of vehicles of heading 8427  (1)0 %p/st31.12.2023
0.6821ex 8436 99 0010Part containing:

—a single-phase AC motor,

—an epicyclic gearing,

—a cutter blade,

and whether or not containing:

—a capacitor,

—a part fitted with a threaded bolt,

for use in the manufacture of garden shredders (1)
0 %p/st31.12.2025
0.3374ex 8439 99 0010Suction-roll shells, produced by centrifugal casting, not drilled, in the form of alloy-steel tubes, of a length of 3 000  mm or more and an external diameter of 550 mm or more0 %p/st31.12.2023
0.2599ex 8477 80 9910Machines for casting or for surface modification of plastic membranes of heading 39210 %p/st31.12.2023
0.8123ex 8479 89 9728Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with:

—electronic brake assistants,

—hydraulic unit driven by brushless electric motor,

—brake fluid reservoir,

for use in the manufacture of plug-in hybrid passenger cars (1)
0 %-31.12.2025
0.7517ex 8479 89 9735Mechanical unit ensuring the movement of the camshaft with:

—6 or 8 oil chambers,

—a phasing range of at least 18° but not more than 62°,

—a steel and/or steel alloy sprocket,

—a steel and/or steel alloy and/or aluminium alloy rotor
0 %-31.12.2023
0.8206ex 8479 89 97

ex 8501 31 00
38

68
Camshaft actuator for controlling the timing of valve opening by using electromotor in a continuous variable valve timing system of an internal combustion piston engine, of:

—a length of 110 mm or more but not more than 140 mm,

—a width of 90 mm or more but not more than 130 mm,

—a height of 80 mm or more but not more than 110 mm

for use in the manufacture of engines of motor vehicles (1)
0 %-31.12.2026
0.7979ex 8479 89 9755Integrated automated turnkey machinery line for manufacturing jelly rolls of cylindrical lithium ion battery cells by winding, tab assembly and cutting of cathode, separator and anode0.8 %-31.12.2023
0.6230ex 8479 89 9760Bioreactor for biopharmaceutical cell culture

—having interior surfaces of austenitic stainless steel, and

—with a process capacity up to 15 000 litres,

—whether or not combined with a ‘clean-in-process’ system and/or a dedicated paired media hold vessel
0 %p/st31.12.2026
0.7982ex 8479 89 9765Integrated automated turnkey machinery line for the assembly of battery cells to cylindrical lithium ion batteries with a speed of 300 parts per minute and production line0.8 %-31.12.2023
0.6573ex 8479 89 9770Machine to accurately align and attach lenses into a camera assembly in five axis alignment capability and fix them in position with a two part cure epoxy0 %p/st31.12.2024
0.7964ex 8479 90 7040Housing of the rotor part of the mechanical unit ensuring the adjustment of movement of the camshaft compared to the crankshaft:

—of a circular shape,

—made of steel alloy with sintering process,

—with not more than 8 oil chambers,

—with a Rockwell hardness of 55 or more,

—with a density of 6,5 g/cm3, or more, but not more than 6,7 g/cm3
0 %-31.12.2025
0.7962ex 8479 90 7050Rotor part of the mechanical unit ensuring the movement of the camshaft compared to the crankshaft:

—with 4 blades that end in grooves,

—made of steel alloy with sintering process
0 %-31.12.2025
0.7375ex 8481 10 19

ex 8481 10 99
30

20
Electromagnetic pressure reducing valve

—with a plunger,

—with an operating pressure of not more than 325 MPa,

—with a plastic connector with 2 silver or tin, or silver-plated, or tin-plated, or silver and tin plated pins
0 %-31.12.2024
0.7424ex 8481 10 9940Pressure reducing valves in a brass case with:

—a length of not more than 30 mm (± 1 mm),

—a width of not more than 18 mm (± 1 mm),

of a kind used for incorporation in fuel delivery modules of motor vehicles
0 %-31.12.2027
0.7968ex 8481 30 91

ex 8481 30 99
30

50
Mechanical check (non-return) valve for opening and closing of the flow of fuel:

—with an operating pressure of not more than 250 MPa,

—with a flow rate of 45 cm3/minute or more, but not more than 55 cm3/minute,

—with 4 input holes, each of them with a diameter of 1,2 mm or more, but not more than 1,6 mm,

—made of steel
0 %-31.12.2025
0.4668ex 8481 30 9191Steel check (non-return) valves with:

—an opening pressure of not more than 800 kPa,

—an external diameter not more than 37 mm
0 %p/st31.12.2024
0.7850ex 8481 30 9930Brake booster check valve assembly containing at least:

—three vulcanized rubber hoses,

—one membrane valve,

—two metal clamps,

—one metal holder,

—whether or not connecting metal pipe,

for use in the manufacture of motor vehicles (1)
0 %-31.12.2024
0.3363ex 8481 80 5910Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines0 %p/st31.12.2023
0.7155ex 8481 80 5920Pressure regulating valve for incorporation into compressors of motor vehicle air condition units (1)0 %p/st31.12.2026
0.7380ex 8481 80 5930Two-way flow control valve with housing, with:

—at least 5, but not more than 16 outlet holes with at least 0,05 mm, but not more than 0,5 mm diameter,

—at least 330 cm3/minute, but not more than 5 000 cm3/minute flow rate,

—at least 19, but not more than 300 MPa operating pressure
0 %-31.12.2024
0.7377ex 8481 80 5940Flow-control valve:

—made of steel,

—with an outlet hole with a diameter of 0,05 mm or more, but not more than 0,5 mm,

—with an inlet hole with a diameter of 0,1 mm or more, but not more than 1,3 mm,

—with chromium nitride coating,

—with a surface roughness of Rp 0,4
0 %-31.12.2027
0.7381ex 8481 80 5950Electromagnetic valve for quantity control with:

—a plunger,

—a solenoid with a of coil resistance of at least 1,85 Ohm, but not more than 8,2 Ohm
0 %-31.12.2027
0.7382ex 8481 80 5960Electromagnetic valve for quantity control

—with a solenoid with a coil resistance of at least 0,19 Ohm, but not more than 0,66 Ohm, and with an inductance of not more than 1 mH
0 %-31.12.2027
0.7960ex 8481 80 59

ex 8481 90 00
70

80
Flow-control valve

—made of steel,

—with an outlet hole with a diameter of at least 0,05 mm, but not more than 0,5 mm,

—with an inlet hole with a diameter of at least 0,1 mm, but not more than 1,3 mm
0 %-31.12.2025
0.5575ex 8481 80 6960Four-way reversing valve for refrigerants, consisting of:

—a solenoid pilot valve

—a brass valve body including valve slider and copper connections

with a working pressure up to 4,5 MPa
0 %p/st31.12.2027
0.7519ex 8481 80 73

ex 8481 80 99
20

70
Pressure- and flow-control valve controlled by external electromagnet:

—made of steel and/or steel alloy(s),

—without integrated circuit,

—of not more than 1000 kPa operating pressure,

—with a flow quantity of not more than 5 l/min,

—without an electromagnet
0 %-31.12.2023
0.7637ex 8481 80 79

ex 8481 80 99
30

30
Service Valve which suits for R410A or R32 gas while connecting indoor and outdoor units with:

—a withstanding pressure of the valve body of 6,3 MPa,

—a leakage ratio of less than 1,6 g/a,

—an impurity ratio of less than 1,2 mg/PCS,

—an airtight pressure of the valve body of 4,2 MPa,

for use in the manufacture of air conditioners (1)
0 %-31.12.2023
0.7518ex 8481 90 0040Valve armature:

—for the opening and closing of the flow of fuel,

—consisting of a shaft and a blade,

—with at least 3 but not more than 8 holes on the blade,

—made of metal and/or metal alloy(s)
0 %-31.12.2023
0.6391ex 8482 10 10

ex 8482 10 90

ex 8482 50 00
10

10

10
Ball and cylindrical bearings:

—with an outside diameter of 28 mm or more but not more than 140 mm,

—with an operational thermal stress of more than 150 °C at a working pressure of not more than 14 MPa,

for the manufacture of machinery for the protection and control of nuclear reactors in nuclear power plants (1)
0 %p/st31.12.2024
0.7735ex 8482 10 1015Ball bearings with:

—an internal diameter of 4 mm or more but not more than 9 mm,

—an external diameter of not more than 26 mm,

—a width of not more than 8 mm,

for use in the manufacture of electromotors with a range of 40 000 rpm or more but not more than 80 000 rpm (1)
0 %-31.12.2024
0.7707ex 8482 10 10

ex 8482 10 90
25

40
Double row ball bearings / ball bearing cartridges:

—with an internal diameter of 3 mm or more, but not more than 9 mm,

—with an external diameter of 17 mm or more, but not more than 36 mm,

—with a width of 6 mm or more, but not more than 69 mm,

—manufactured according to ISO standard 492 - Class 5 or DIN 620 - P5 or ANSI Standard 20 - ABEC 5,

—with ceramic balls,

for use in turbo compressors (turbochargers) (1)
0 %-31.12.2024
0.8098ex 8482 50 0020Axial roller bearing made of steel:

—the retainer is made of cold-rolled steel with a carbon content of up to 0,25 percent, complying with standard ASTM A109-98,

—the rollers are made of anti-friction steel according to ASTM 295-94,

—with an external diameter of 63 mm or more but not more than 66 mm,

—with an internal diameter of 44 mm or more but not more than 46 mm,

—with a weight of 23 g or more but not more than 27 g,

—with 36 rollers or more but not more than 38 rollers
0 %p/st31.12.2025
0.5744ex 8483 30 32

ex 8483 30 38
30

60
Bearing housing of a kind used in turbochargers:

—of precision-cast grey cast iron complying with standard DIN EN 1561 or precision-cast ductile cast iron complying with DIN EN 1560,

—with oil chambers,

—without bearings,

—with a diameter of 50 mm or more, but not more than 250 mm,

—with a height of 40 mm or more, but not more than 150 mm,

—whether or not with water chambers and connectors
0 %p/st31.12.2027
0.8303ex 8483 40 2520Worm gearbox

—in an aluminium alloy housing,

—with a plastic or steel worm,

—with mounting holes,

—with a 90 degree reversible drive direction,

—with a 4:19 transmission ratio,

—equipped with a lead screw with a length of 333 mm and a guide nut incorporated into the assembly bracket, with or without a lead screw support,

for indirect connection to the drive motor of a car seat guide system (1)
0 %-31.12.2026
0.5202ex 8483 40 2950Gear set of cycloid gear type with:

—a rated torque of 50 Nm or more but not more than 9 000 Nm,

—standard ratios of 1:50 or more but not more than 1:475,

—lost motion of not more than one arc minute,

—an efficiency of more than 80 %

of a kind used in robot arms
0 %p/st31.12.2026
0.5977ex 8483 40 2960Epicyclic gearing, of a kind used in driving hand-held power tools with:

—a rated torque of 25 Nm or more, but not more than 70 Nm,

—standard gear ratios of 1:12.7 or more, but not more than 1:64.3
0 %p/st31.12.2023
0.2503ex 8483 40 5120Gear box, having a differential with wheel axle, for use in the manufacture of self-propelled lawnmowers with a seat of subheading 8433 11 51  (1)0 %p/st31.12.2023
0.7920ex 8483 40 5930Hydrostatic speed changer:

—with a hydro pump and a differential with wheel axle,

—whether or not with a fan impeller and/or a pulley,

for use in the manufacture of lawn mowers of subheadings 8433 11 and 8433 19 or other mowers of subheading 8433 20  (1)
0 %p/st31.12.2024
0.4997ex 8483 40 9080Transmission gearbox, with:

—not more than 3 gears,

—an automatic deceleration system, and

—a power reversal system,

for use in the manufacture of goods of heading 8427  (1)
0 %p/st31.12.2025
0.8100ex 8483 50 8020Pulley blocks of non-cast steel:

—made of structural carbon steel complying with standard JIS G4051,

—with an external diameter of 114 mm or more but not more than 118 mm,

—with an internal diameter of 33 mm or more but not more than 37 mm,

—with a width of 29 mm or more but not more than 33 mm,

—with a weight of 0,6 kg or more but not more than 0,9 kg,

—with 6 trapezoidal grooves
0 %p/st31.12.2025
0.8209ex 8483 90 8920Sprocket for continuous variable valve timing to optimize the process of filling the cylinders of an internal combustion engine with:

—case,

—rotor,

—at least 4 screws,

—spring,

—of an external diameter of 80 mm or more but not exceeding 95 mm,

—of a thickness of 25 mm or more but not more than 35 mm,

for use in the manufacture of engines of motor vehicles (1)
0 %-31.12.2026
0.7156ex 8484 20 0010Mechanical shaft seal for incorporation into rotary compressors for use in the manufacture of motor vehicle air condition units (1)0 %p/st31.12.2026
0.7604ex 8484 20 0020Mechanical face sealing device made of two movable rings (one ceramic mating, with a thermal conductivity lower than 80W/mK and the other carbon sliding), one spring and a nitrile sealant on the external side0 %-31.12.2023
0.6854ex 8501 10 1020Synchronous motor for a dishwasher with a water flow control mechanism with

—a length without axle of 24 mm (± 0,3),

—a diameter of 49,3 mm (± 0,3),

—a rated voltage of 220 V AC or more but not more than 240 V AC,

—a rated frequency of 50 Hz or more but not more than 60 Hz,

—an input power of not more than 4 W,

—a rotation speed of 4rpm or more but not more than 4,8rpm,

—an output torque of not less than 10kgf/cm
0 %-31.12.2027
0.7601ex 8501 10 1030Motors for air pumps, with:

—operating voltage of 9 VDC or more but not more than 24 VDC,

—operating temperature range of -40 °C or more but not more than 80 °C,

—an output not exceeding 18 W,

for use in the manufacture of pneumatic support and ventilation systems for car seats (1)
0 %-31.12.2023
0.7857ex 8501 10 1040Synchronous hybrid stepper motor with:

—an output not exceeding 18 W,

—two phases,

—a rated current of not more than 2,5 A/phase,

—a rated voltage of not more than 20 V,

—with or without a threaded shaft,

for use in the manufacture of 3D printers (1)
0 %-31.12.2024
0.8390ex 8501 10 10

ex 8501 10 99
50

30
Linear actuator for automotive electric seat adjustment applications:

—consisting of a permanently excited DC motor with an integrated gear mechanism and leadscrew,

—whether brushed or brushless,

—whether or not with electronic control unit,

—whether or not with Hall Effect Sensor,

—with a nominal voltage of 8 V or higher but not higher than 16 V,

—with a rated output mechanical power not exceeding 20 W, and

—with a specified temperature range from -40 °C to 160 C,

for use in the manufacture of automotive components for car’s seats (1)
0 %-31.12.2027
0.8389ex 8501 10 10

ex 8501 10 99
60

40
Rotary actuator for automotive electric seat adjustment applications:

—consisting of a permanently excited DC motor with an integrated gear mechanism,

—whether brushed or brushless,

—whether or not with electronic control unit,

—whether or not with Hall Effect Sensor,

—with a nominal voltage of 8 V or more but not more than 16 V,

—with a rated output mechanical power not exceeding 35 W, and

—with a specified temperature range from -40 °C to 160 C,

for use in the manufacture of automotive components for car’s seats (1)
0 %-31.12.2027
0.8394ex 8501 10 9920Worm axis motor for automotive electric seat adjustment applications:

—consisting of a permanently excited DC motor with a worm wheel,

—whether brushed or brushless,

—whether or not with electronic control unit,

—whether or not with Hall Effect Sensor,

—with a nominal voltage of 8 V or more but not more than 16 V,

—with a rated output mechanical power not exceeding 35 W, and

—with a specified temperature range from -40 °C to 160 C,

for use in the manufacture of automotive components for car’s seats (1)
0 %-31.12.2027
0.8396ex 8501 10 9950Electric (DC) motor powering height adjusting with:

—a rated output mechanical power not exceeding 35 W,

—frame integration with a length of 156 mm, a height of 59 mm, a thickness of 36 mm and a weight of 500 g,

—a stall torque of 45 Nm and ultimate torque of 200 Nm,

—a maximum current of 15 A,

—no load speed of 7 RPM or more but not more than 10 RPM,

—a rotation speed of 4 000 RPM or more but not more than 5 600 RPM,

—a maximum noise level of 42 dB(A),

—a maximum angular backlash up to 3 degrees, and

—a 8 tooth pinion module,

for use in the manufacture of automotive components for car’s seats (1)
0 %-31.12.2027
0.7197ex 8501 10 9956DC Motor :

—with a speed rotation of not more than 7 000  rpm (without load),

—with a nominal voltage of 12 V (± 4 V),

—with a maximum power of 13,78 W (at 3,09 A),

—with a specified temperature range from -40 °C to 160 °C,

—with a gear connection,
0 %-31.12.2026
—with a mechanical attachment interface,

—with 2 electrical connections,

—with a maximum torque of 100 Nm
0.7198ex 8501 10 9958DC Motor :

—with a speed rotation of not more than 6 500  rpm (without load),

—with a nominal voltage of 12 V (± 4 V),

—with a maximal power below than 20 W,

—with a specified temperature range from -40 °C to 160 °C,

—with a worm gear drive,

—with a mechanical attachment interface,

—with 2 electrical connections,

—with a maximum torque of 75 Nm
0 %-31.12.2026
0.5846ex 8501 10 9960DC motor:

—with a rotor speed of 3 500  rpm or more but not more than 5 000 rpm loaded and not more than 6 500 rpm when not loaded

—with a power supply voltage of 100 V or more but not more than 240 V

for use in the manufacture of electric fryers (1)
0 %-31.12.2027
0.6858ex 8501 10 9964DC motor to control angular position of the flap to adjust gas flow in the Air Throttle and EGR valve:

—with Ingress Protection (IP) standard of IP69,

—with a rotor speed of not more than 6 500 rpm when not loaded,

—with a rated voltage of 12,0 V (± 0,1),

—of a specified temperature range of – 40 C or more but not more than + 165 C,

—with or without a connecting pinion,

—with or without an engine connector,

—with or without a flange,

—with a diameter of not more than 40 mm (not including the flange),

—with an overall height of not more than 90 mm (from the base to the pinion)
0 %-31.12.2026
0.6880ex 8501 10 9965Electric turbocharger actuator, with:

—a DC motor,

—an integrated gear mechanism,

—a (pulling)force of 200 N or more at a minimum of 140 °C elevated ambient temperature,

—a (pulling) force of 250 N or more in each position of its stroke,

—an effective stroke of 15 mm or more but not more than 25 mm,

—with or without an on-board diagnostics interface
0 %-31.12.2025
0.6115ex 8501 10 9970DC stepping motor, with:

—a two-phase winding,

—a rated voltage of 9 V or more, but not more than 16,0 V,

—of a specified temperature range of - 40 C or more but not more than + 105 C,

—with or without connection pinion,

—with or without motor drive connector
0 %-31.12.2023
0.6627ex 8501 10 9975Permanently excited DC motor with

—a multiple-phase winding,

—an external diameter of 28 mm or more but not more than 35 mm,

—a rated speed of not more than 12 000 rpm,

—a power supply voltage of 8 V or more but not more than 27 V
0 %-31.12.2025
0.2838ex 8501 10 9979DC motor with brushes and an internal rotor with a three-phase winding, whether or not equipped with a worm, of a specified temperature range covering at least - 20 C to + 70 C0 %-31.12.2023
0.4555ex 8501 10 9980DC stepping motor, with:

—an angle of step of 7,5° (± 0,5°),

—a pull-out torque at 25 °C of 25 mNm or more,

—a pull-out pulse rate of 1 500  pps or more,

—a two-phase winding, and

—a rated voltage of 10,5 V or more, but not more than 16,0 V
0 %-31.12.2023
0.7250ex 8501 20 0040Universal AC/DC motor with:

—a rated output of 50 W but not higher than 1,2 kW,

—a supply voltage of 230 V,

—whether or not with engine brake,

—whether or not assembled to a reduction gear with output shaft, which is contained in a housing,

—whether or not fitted with a motor control/motor switch connected by cable, and

—whether or not with fan,

for use as electric drive of lawnmower blades or domestic appliances (1)
0 %-31.12.2024
0.8345ex 8501 20 0050Universal AC/DC motor, rotating:

—with a nominal supply voltage of 230 V,

—with a power of more than 37,5 W but not more than 2 000 W,

—with a stator cross-section of 93 mm or more but not more than 103 mm and a thickness of 15 mm or more but not more than 45 mm, and

—with or without a worm gear, gears or a gearbox,

for the production of a torque to a transmission shaft for small domestic appliances (1)
0 %-31.12.2027
0.8349ex 8501 20 0060Universal AC/DC motor, rotating:

—with a nominal supply voltage of 230 V,

—with a power of more than 37,5 W but not more than 1 200 W,

—with a stator cross-section of 65 mm or more but not more than 75 mm and a thickness of 15 mm or more but not more than 45 mm, and

—with or without a worm gear, gears or a gearbox,

for the production of a torque to a transmission shaft for small domestic appliances (1)
0 % (1)-31.12.2027
0.8367ex 8501 20 0070Universal AC/DC motor, rotating:

—with a nominal supply voltage of 230 V,

—with a power of more than 37,5 W but not more than 700 W,

—with a stator cross-section of 49 mm or more but not more than 59 mm and a thickness of 15 mm or more but not more than 45mm, and

—with or without a worm gear, gears or a gearbox,

for the production of a torque to a transmission shaft for small domestic appliances (1)
0 %-31.12.2027
0.5954ex 8501 31 0045DC motors, brushless, with:

—an external diameter of 90 mm or more, but not more than 110 mm,

—a rated speed of not more than 3 680  rpm,

—an output of 600 W or more but not more than 740 W at 2 300  rpm and at 80 °C,

—a supply voltage of 12 V,

—a torque of not more than 5,67 Nm,

—a rotor position sensor,

—an electronic star-point relay, and

—for use with an electric power steering control module
0 %-31.12.2023
0.8395ex 8501 31 0047Motor for automotive electric seat adjustment applications:

—with a shaft output on both motor sides,

—consisting of a permanently excited DC motor,

—whether brushed or brushless,

—whether or not with electronic control unit,

—whether or not with Hall Effect Sensor,

—with a nominal voltage of 8 V or more but not more than 16 V,

—with a rated output mechanical power not exceeding 120 W, and

—with a specified temperature range from -40 °C to 160 C,

for use in the manufacture of automotive components for car’s seats (1)
0 %-31.12.2027
0.5577ex 8501 31 0050DC motors, brushless, with:

—an external diameter of 80 mm or more, but not more than 200 mm,

—a supply voltage of 9 V or more, but not more than 16 V,

—an output at 20 °C of 300 W or more, but not more than 750 W,

—a torque at 20 °C of 2,00 Nm or more, but not more than 7,00 Nm,

—a rated speed at 20 °C of 600 rpm or more, but not more than 3 100 rpm,

—with or without a pulley,

—with or without an electronic power steering sensor/controller
0 %-31.12.2027
0.5978ex 8501 31 00

ex 8501 32 00
55

40
DC motor with or without commutator, with

—an external diameter of 24,2 mm or more, but not more than 140 mm,

—a rated speed of 3 300 rpm or more, but not more than 26 200 rpm,

—a rated supply voltage of 3,6 V or more, but not more than 230 V,

—an output power of more than 37,5 W, but not more than 2 400 W,

—a free load current of not more than 20,1 A,

—a maximum efficiency of 50 % or more,

for driving hand-held power tools or lawn mowers
0 %-31.12.2023
0.4731ex 8501 31 0058Permanently excited DC motor with:

—an external diameter of 30 mm or more but not more than 90 mm, including mounting flange,

—a rated speed of not more than 15 000 rpm,

—an output of 45 W or more but not more than 400 W, and

—a supply voltage of 9 V or more but not more than 50 V,

—whether or not a multiple-phase winding,

—whether or not with a drive disc,

—whether or not with a crankcase,

—whether or not with a fan,

—whether or not with a cap assembly,

—whether or not with a sun gear,
0 %-31.12.2024
—whether or not with a speed and rotational direction encoder,

—whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type,

—whether or not with a mounting flange
0.6809ex 8501 31 00

ex 8501 32 00
63

65
Ready for installation in vehicles or equipment of headings 8432 and 8433 , brushless and permanently excited direct current motor with:

—a specified speed of not more than 4 100 rpm,

—a minimum output of 400 W, but not more than 1,3 kW (at 12 V), or with a minimum output of 750 W but not more than 1,55 kW (at 36 V),

—a flange diameter of 85 mm or more but not more than 200 mm,
0 %-31.12.2025
—a maximum length of 335 mm, measured from the beginning of the shaft to the outer ending,

—a housing length of not more than 265 mm, measured from the flange to the outer ending,

—a maximum of two-piece (basic housing including electric components and flange with minimum 2 and maximum 11 bore holes) aluminium diecast or sheet steel housing whether or not with a sealing compound (groove with an O-ring and grease),

—a stator with single T-tooth design and single coil windings in 9/6 or 12/8 topology, and

—surface magnets,

—whether or not with electronic power steering controller,

—whether or not with pulley,

—whether or not with rotor position sensor
0.4855ex 8501 33 00

ex 8501 40 80

ex 8501 53 50
30

50

10
Electric drive for motor vehicles, with an output of not more than 315 kW:

—with an AC or DC motor with or without transmission,

—with or without power electronics
0 %-31.12.2026
0.8188ex 8501 40 2035Electric AC motor, single-phase, with:

—a rated power of 120 W or more but not more than 150 W,

—an input power of 280 W or more but not more than 350 W,

—an external diameter without bracket connector and pulley of 145 mm or more but not more than 160 mm,

—a rated speed of 2 680 rpm or more but not more than 3 000 rpm,

—a weight of 4,2 kg or more but not more than 4,6 kg,

—pulleys, a spindle and a tachometer,

for use in the manufacture of home appliance products (1)
0 %-31.12.2026
0.8189ex 8501 40 2045Electric AC motor, single-phase, with:

—a rated power of 275 W or more, but not more than 325 W,

—an input power of 600 W or more but not more than 700 W,

—an external diameter without bracket and connector of 150 mm or more but not more than 170 mm,

—a rated speed of 15 000 rpm or more but not more than 20 000 rpm,

—a weight of 4,2 kg or more,

—a pulley and a tachometer,

for use in the manufacture of home appliance products (1)
0 %-31.12.2026
0.8191ex 8501 40 2050Electric AC motor, single-phase, with:

—a rated power of 300 W or more but not more than 370 W,

—an input power of 600 W or more but not more than 700 W,

—an external diameter without bracket and connector of 150 mm or more but not more than 170 mm,

—a rated speed of 15 000 rpm or more but not more than 19 000 rpm,

—a weight of 4,8 kg or more,

—a pulley,

for use in the manufacture of home appliance products (1)
0 %-31.12.2026
0.8192ex 8501 40 2055Electric AC motor, single-phase, with:

—a rated power of 275 W or more, but not more than 325 W,

—an input power of 600 W or more but not more than 700 W,

—an external diameter without bracket and connector of 160 mm or more but not more than 180 mm,

—a rated speed of 15 000 rpm or more but not more than 19 000 rpm,

—a weight of not more than 4,4 kg,

—a pulley,

for use in the manufacture of home appliance products (1)
0 %-31.12.2026
0.8193ex 8501 40 2060Electric AC motor, single-phase, with:

—a rated power of 275 W or more but not more than 325 W,

—an output power of 550 W or more but not more than 600 W,

—an input power of 800 W or more but not more than 1 000  W,

—an external diameter of more than 150 mm but not more than 170 mm without the bracket,

—a rated speed of more than 16 000 rpm but not more than 18 000 rpm,

—a weight of 3,4 kg or more but not more than 3,7 kg,

—a pulley,

for use in the manufacture of home appliance products (1)
0 %-31.12.2026
0.5329ex 8501 51 00

ex 8501 52 20
30

50
AC synchronous servo motor with resolver and brake for a maximum speed of not more than 6 000 rpm, with:

—an output of 340 W or more but not more than 7,4 kW,

—a flange of dimensions of not more than 180 mm × 180 mm, and

—a length from flange to extreme end of resolver of not more than 271 mm
0 %-31.12.2026
0.8190ex 8501 51 0040Electric AC motor, three-phase, with:

—a rated power of 280 W or more but not more than 320 W,

—an output power of 480 W or more but not more than 540 W,

—an input power of 800 W or more but not more than 900 W,

—an external diameter of 150 mm or more but not more than 170 mm,

—a rated speed of 15 000 rpm or more but not more than 20 000 rpm,

—a weight of 6 kg or more but not more than 6,4 kg,

—a pulley and a tachometer,

for use in the manufacture of home appliance products (1)
0 %-31.12.2026
0.8404ex 8501 51 0050Three phase AC synchronous brushless permanent magnet motor with:

—an output of 500 W or more but not more than 700 W,

—an external diameter of 129,7 mm or more but not more than 180,3 mm,

—a rated speed of 16 000 rpm or more but not more than 17 000 rpm,

—a weight of 2,5 kg or more but not more than 3,1 kg, and

—with a pulley,

for use in the manufacture of home appliance products (1)
0 %-31.12.2027
0.6511ex 8501 53 5020AC traction motor of the Interior Permanent Magnet Synchronous Motor (IPMSM) type with:

—a torque output of 200 Nm or more, but not more than 400 Nm,

—a power output of 50 kW or more, but not more than 200 kW,

—a rotation speed of no more than 15 000 rpm,

for use in the manufacture of electric vehicles (1)
0 %-31.12.2024
0.8129ex 8501 53 5030Permanent magnet synchronous traction motor, with:

—a continuous power of 110 kW or more but not more than 180 kW,

—a liquid cooled system,

—a total length of 500 mm or more but not more than 650 mm,

—a total width of 600 mm or more but not more than 700 mm,

—a total height of 550 mm or more but not more than 650 mm,

—weighing of not more than 350 kg,

—3 suspension points
0 %-31.12.2025
0.8285ex 8501 53 5040Permanent magnet traction AC motor, with:

—a continuous power of 110 kW or more but not more than 150 kW,

—a liquid cooled system,

—a total length of 460 mm or more but not more than 590 mm,

—a total width of 450 mm or more but not more than 580 mm,

—a total height of 490 mm or more but not more than 590 mm,

—a weight of not more than 310 kg,

—4 mounting points
0 %-31.12.2026
0.8130ex 8501 62 0040AC, 3-phase generator, with:

—a continuous power of 147 kVA or more but not more than 222 kVA,

—a continuous torque of 650 Nm or more but not more than 900 Nm,

—a maximum working speed of 2 700 revolutions per minute (rpm),

—a liquid cooled system,

—a length of 100 mm or more but not more than 200 mm,

—a width of 550 mm or more but not more than 650 mm,

—a height of 550 mm or more but not more than 650 mm,

—weighing of not more than 150 kg
0 %-31.12.2025
0.2837ex 8503 00 91

ex 8503 00 99
31

32
Rotor, at the inner side provided with one or two magnetic rings (uniform or sectional) whether or not incorporated in a steel ring or bearing mounted in steel housing0 %p/st31.12.2023
0.2836ex 8503 00 9931Stamped collector of an electric motor, having an external diameter of not more than 16 mm0 %p/st31.12.2023
0.4599ex 8503 00 9933Stator for brushless motor of electrical power steering with a roundness tolerance of 50 μm0 %p/st31.12.2026
0.4601ex 8503 00 9934Rotor for brushless motor of electrical power steering with a roundness tolerance of 50 μm0 %p/st31.12.2024
0.7496ex 8503 00 9937Rotor for an electric motor, with the rotor cylindrical body made of agglomerated ferrite and plastics and the shaft made of metal with:

—diameter of the rotor body of 17 mm or more but not more than 37 mm,

—length of the rotor body of 12 mm or more but not more than 36 mm,

—shaft length of 52 mm or more but not more than 82 mm
0 %-31.12.2023
0.6161ex 8503 00 9955Stator for brushless motor, with:

—an internal diameter of 206,6 mm (± 0,5),

—an external diameter of 265,0 mm (± 0,2), and

—a width of 37,2 mm or more but not more than 47,8 mm,

of a kind used in the manufacture of washing machine, washer-dryer or dryer equipped with direct drive drums
0 %p/st31.12.2025
0.6379ex 8503 00 9960Engine cover for electronic belt drive steering system of galvanized steel with a thickness of not more than 2,5 mm (± 0,25 mm)0 %p/st31.12.2024
0.7760ex 8503 00 9965Rotor body of stacked electrical sheet having:

—a diameter of 18 mm or more but not more than 35 mm, and

—a length of 20 mm or more but not more than 65 mm
0 %-31.12.2024
0.7761ex 8503 00 9975Stator body of stacked electrical sheet having:

—an inner diameter of 18 mm or more but not more than 35 mm,

—an outer diameter of 35 mm or more but not more than 65 mm, and

—a length of 20 mm or more but not more than 65 mm,

—whether or not incorporated in a housing
0 %-31.12.2024
0.7758ex 8503 00 9980Steel motor housing having:

—an inner diameter of 35 mm or more but not more than 65 mm,

—an outer diameter of 35 mm or more but not more than 70 mm, and

—a length of 35 mm or more but not more than 150 mm
0 %-31.12.2024
0.7549ex 8504 31 8015Electrical Transformer with

—a capacity of 192 Watts or 216 Watts

—dimensions of not more than 27,1 x 26,6 x 18 mm

—an operating temperature range of – 40 °C or more, but not more than + 125 °C

—three or four inductively coupled copper wire windings and

—9 connection pins at the bottom
0 %-31.12.2023
0.7548ex 8504 31 8025Electrical Transformer with

—a capacity of 432 Watts

—dimensions of not more than 24 mm x 21 mm x19 mm

—an operating temperature range of – 20 °C or more, but not more than + 85 °C

—two windings and

—5 connection pins at the bottom
0 %-31.12.2023
0.4450ex 8504 31 8030Switching transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters (1)0 %-31.12.2023
0.7547ex 8504 31 8035Electrical Transformer with

—a capacity of 433 Watts

—dimensions of not more than 37,3 x 38,2 x 28,5 mm

—an operating temperature range of – 40 °C or more, but not more than + 125 °C

—four inductively coupled copper wire windings and

—13 connection pins at the bottom
0 %-31.12.2023
0.7551ex 8504 31 8045Electrical Transformer with:

—a capacity of 0,2 Watts,

—dimensions of not more than 15 mm x 15,5 mm x 14 mm,

—an operating temperature range of – 10 °C or more, but not more than + 125 °C,

—two inductively coupled copper wire windings,

—5 connection pins at the bottom, and

—a copper shielding
0 %-31.12.2023
0.7000ex 8504 31 8050Transformers for use in the manufacture of electronic drivers, control devices and LED light sources for lighting industry (1)0 %-31.12.2026
0.7764ex 8504 31 8055Electrical transformer with:

—a capacity of 0,22 kVA or more, but not more than 0,24 kVA,

—an operating temperature range of + 10 °C or more, but not more than + 125 °C,

—four or five inductively coupled copper wire windings,

—11 or 12 connection pins at the bottom, and

—dimensions of not more than 32 mm x 37,8 mm x 25,8 mm
0 %-31.12.2024
0.7029ex 8505 11 0047Articles in the form of a triangle, square, rectangle, or trapezoid, whether or not arched, with rounded corners or oblique sides, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with the following dimensions:

—a length of 9 mm or more but not more than 105 mm,

—a width of 5 mm or more but not more than 105 mm, and

—a height of 2 mm or more but not more than 55 mm
0 %-31.12.2026
0.5584ex 8505 11 1050Bars specifically shaped, intended to become permanent magnets after magnetisation, containing neodymium, iron and boron, with dimensions:

—a length of 15 mm or more but not more than 52 mm,

—a width of 5 mm or more but not more than 42 mm,

of a kind to be used in the manufacture of electric servomotors for industrial automation
0 %p/st31.12.2027
0.7567ex 8505 11 1053Permanent magnets of a neodymium alloy cylindrical shaped with notch with internal threaded bore on one side, with

—a length of 97,5 mm or more, but not more than 225 mm

—a diameter of 19 mm or more, but not more than 25 mm
0 %-31.12.2023
0.5585ex 8505 11 1063Rings, tubes, bushings or collars made from an alloy of neodymium, iron and boron, with

—an external diameter of not more than 45 mm,

—a height of not more than 45 mm,

of a kind used in the manufacture of permanent magnets after magnetisation
0 %p/st31.12.2027
0.3740ex 8505 11 1065Permanent magnets consisting of an alloy of neodymium, iron and boron, either in the shape of a rectangle, whether or not rounded, with a rectangular or a trapezoidal section having

—a length of not more than 140 mm,

—a width of not more than 90 mm and

—a thickness of not more than 55 mm,

or in the shape of curved rectangle (tile type) having

—a length of not more than 75 mm,

—a width of not more than 40 mm,

—a thickness of not more than 7 mm and

—a radius of curvature of more than 86 mm but not more than 241 mm

or in the shape of a disc with a diameter of not more than 90 mm, whether or not containing a hole in the centre
0 %p/st31.12.2023
0.7788ex 8505 11 1068Blocks made of neodymium, iron and boron or an alloy of samarium and cobalt, whether or not covered with zinc, intended to become permanent magnets after magnetisation with:

—a length of 13,8 mm or more but not more than 45,2 mm,

—a width of 7,8 mm or more but not more than 25,2 mm,

—a height of 1,3 mm or more but not more than 4,7 mm
0 %-31.12.2024
0.5948ex 8505 11 1070Disc consisting of an alloy of neodymium, iron and boron, covered with nickel or zinc, that after magnetisation is intended to become a permanent magnet

—whether or not containing a hole in the centre,

—with a diameter of not more than 90 mm,

of a kind used in car loudspeakers
0 %-31.12.2023
0.6857ex 8505 11 10

ex 8505 11 90

ex 8505 19 90
73

73

35
Articles in shape of flat bars, arched bars or quarter sleeves, made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy, whether or not overmolded with polymers, intended to become permanent magnets after magnetisation with:

—a length of 5 mm or more, but not more than 60 mm,

—a width of 5 mm or more, but not more than 40 mm,

—a thickness of 3 mm or more, but not more than 15 mm
0 %p/st31.12.2024
0.6347ex 8505 11 10

ex 8505 11 90
75

75
A quarter sleeve intended to become permanent magnet after magnetization,

—consisting of at least neodymium, iron and boron,

—with a width of 9,1 mm or more but not more than 10,5 mm,

—with a length of 20 mm or more but not more than 30,1 mm,

of a kind used on rotors for the manufacture of fuel pumps
0 %p/st31.12.2024
0.7789ex 8505 19 1020Arc segments of permanent magnets of agglomerated ferrite, with:

—a length of 16,8 mm or more, but not more than 110,2 mm,

—a width of 14,8 mm or more, but not more than 75,2 mm,

—a thickness of 4,8 mm or more, but not more than 13,2 mm,

for use in the manufacture of electromotor rotors for ventilation and air-conditioning systems (1)
0 %-31.12.2024
0.5937ex 8505 19 9030Articles of agglomerated ferrite in the shape of a disc with a diameter of not more than 120 mm, containing a hole in the centre intended to become permanent magnets after magnetisation with a remanence between245 mT and 470 mT0 %-31.12.2023
0.7299ex 8505 19 9050Article of agglomerated ferrite in the shape of a rectangular prism to become a permanent magnet after magnetisation

—whether or not with bevelled edges

—of a length of 27 mm or more but not more than 32 mm (± 0,15 mm),

—of a width of 8,5 mm or more but not more than 9,5 mm (+0,05 mm / -0,09 mm),

—of a thickness of 5,5 mm or more but not more than 5,8 mm (+0/-0,2 mm), and

—of a weight of 6,1 g or more but not more than 8,3 g
0 %p/st31.12.2027
0.7511ex 8505 19 9060Articles of agglomerated ferrite in the shape of a half-sleeve or a quarter-sleeve, or with rounded corners, to intended to become permanent magnet after magnetisation with the following dimentions:

—a length of 10 mm or more but not more than 100 mm (± 1 mm),

—a width of 10 mm or more but not more than 100 mm (± 1 mm),

—a thickness of 2 mm or more but not more than 15 mm (± 0,15 mm)
0 %-31.12.2023
0.4029ex 8505 20 0030Electromagnetic clutch, for use in the manufacture of compressors of air conditioning machines of motor vehicles (1)0 %p/st31.12.2023
0.8095ex 8505 90 9020Electromagnetic clutch coil in a cylindrical metal housing:

—the metal housing is made of hot-rolled steel complying with standard JIS G 3131 - SPHE,

—the coil is made of copper wire,

—with a weight of 0,4 kg or more but not more than 0,7 kg,

—with a width of 22 mm or more but not more than 25 mm,

—with a plate reinforced to the coil (coil backplate) with an internal diameter of 44 mm or more but not more than 46 mm,

—with an external diameter of 88 mm or more but not more than 96 mm,

—without plunger,

—with one connector
0 %p/st31.12.2025
0.6855ex 8506 50 1010Lithium cylindrical primary cells with:

—a diameter of 14,0 mm or more but not more than 26,0 mm,

—a length of 2,2 mm or more but not more than 51 mm,

—a voltage of 1,5 V or more, but not more than 3,6 V,

—a capacity of 0,15 Ah or more, but not more than 5,00 Ah

for use in the manufacture of telemetry and medical devices, electronic meters or remote controls (1)
0 %-31.12.2023
0.2490ex 8506 50 9010Lithium iodine single cell battery the dimensions of which do not exceed 9 mm × 23 mm × 45 mm and a voltage of not more than 2,8 V0 %-31.12.2023
0.2488ex 8506 50 9030Lithium-iodine or lithium-silver vanadium oxide single cell battery of dimensions of not more than 28 mm × 45 mm × 15 mm and a capacity of not less than 1,05 Ah0 %-31.12.2023
0.5180ex 8506 90 0010Cathode, in rolls, for air zinc button cell batteries (hearing aid batteries) (1)0 %-31.12.2023
0.6685ex 8507 60 0015Cylindrical lithium-ion-accumulators or modules with:

—a nominal capacity of 8,8 Ah or more, but not more than 18 Ah,

—a nominal voltage of 36 V or more, but not more than 48 V,

—a power of 300 Wh or more, but not more than 648 Wh,

for use in the manufacture of electric bicycles (1)
1.3 %-31.12.2023
0.7663ex 8507 60 0018Lithium-ion polymer accumulator equipped with a battery management system and can-bus interface with:

—a length of not more than 1 600  mm,

—a width of not more than 448 mm,

—a height of not more than 395 mm,

—a nominal voltage of 280 V or more but not more than 400 V,

—a nominal capacity of 9,7 Ah or more but not more than 10,35 Ah,

—a charging voltage of 110 V or more but not more than 230 V, and

—containing 6 modules with 90 cells or more but not more than 96 cells enclosed in a steel casing,

for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703  (1)
1.3 %-31.12.2023
0.8368ex 8507 60 0029A lithium-ion-rechargeable battery pack in a specific housing suitable for operating in digital cameras, having:

—a length of 70 mm or more but not more than 120 mm,

—a width of 60 mm or more but not more than 80 mm,

—a height of 15 mm or more but not more than 45 mm,

—a weight of 0,040 kg or more but not more than 0,085 kg, and

—a capacity of not more than 1 860  mAh
1.3 %-31.12.2023
0.2907ex 8507 60 0030Cylindrical lithium-ion accumulator or module, with a length of 63 mm or more and a diameter of 17,2 mm or more, having a nominal capacity of 1 200 mAh or more, for use in the manufacture of rechargeable batteries (1)1.3 %-31.12.2027
0.6703ex 8507 60 0033Lithium-ion accumulator, with:

—a length of 150 mm or more, but not more than 1 000  mm,

—a width of 100 mm or more, but not more than 1 000  mm,

—a height of 200 mm or more, but not more than 1 500  mm,

—a weight of 75 kg or more, but not more than 200 kg,

—a nominal capacity not less than 150Ah and not more than 500 Ah,

—a nominal output voltage of 230V AC (Line to neutral) or a nominal voltage of 64V (±10 %)
1.3 %-31.12.2023
0.6702ex 8507 60 0037Lithium-ion accumulator, with:

—a length of 1 200  mm or more, but not more than 2 000  mm,

—a width of 800 mm or more, but not more than 1 300  mm,

—a height of 2 000  mm or more, but not more than 2 800  mm,

—a weight of 1 800  kg or more, but not more than 3 000  kg,

—a nominal capacity of 2 800 Ah or more but not more than 7 200 Ah
1.3 %-31.12.2023
0.8115ex 8507 60 0048Integrated battery system in a metal case with holders, consisting of:

—a lithium-ion battery with a voltage of 36 V or more but not more than 50,4 V and a nominal energy of 0,6 kWh,

—Battery Management System,

—a power relay,

—a cooling system,

—four connectors,

for use in the manufacture of Mild-hybrid (mHEV) motor vehicles (1)
1.3 %-31.12.2023
0.5548ex 8507 60 0050Modules for the assembly of batteries of ion lithium electric accumulators with:

—a length of 298 mm or more, but not more than 500 mm,

—a width of 33,5 mm or more, but not more than 209 mm,

—a height of 75 mm or more, but not more than 228 mm,

—a weight of 3,6 kg or more, but not more than 17 kg, and

—a power of 458 Wh or more, but not more than 2 900 Wh
1.3 %-31.12.2023
0.7641ex 8507 60 0058Prismatic lithium-ion electric accumulator with:

—a width of 120,0 mm or more but not more than 305,0 mm,

—a thickness of 12,0 mm or more but not more than 67,0 mm,

—a height of 72,0 mm or more but not more than 126,0 mm,

—a nominal voltage of 3,6 V or more but not more than 3,75 V, and

—a nominal capacity of 6,9 Ah or more not more than 265 Ah,

for use in the manufacture of rechargeable electric vehicle batteries (1)
1.3 %-31.12.2023
0.5342ex 8507 60 0065Cylindrical lithium ion cell with

—a nominal diameter of 9,8 mm or more, but not more than 14,5 mm,

—a nominal voltage of 3,0 VDC or more, but not more than 4,0 VDC, and

—a nominal capacity of 200 mAh or more, but not more than 1 200 mAh
1.3 %-31.12.2023
0.7888ex 8507 60 0068Lithium-ion accumulator in a metal housing, with

—a length of 65 mm or more, but not more than 225 mm,

—a width of 10 mm or more, but not more than 75 mm,

—a height of 60 mm or more, but not more than 285 mm,

—a nominal voltage of 2,1 V or more, but not more than 3,8 V, and

—a nominal capacity of 2,5 Ah or more, but not more than 325 Ah
1.3 %-31.12.2023
0.8259ex 8507 60 0073Lithium-ion Electric accumulators consisting of 3 modules containing 102 cells in total, with:

—a nominal capacity of 51 Ah per cell,

—a nominal voltage of 285 V or more but not more than 426V,

—a weight of 33 kg or more but not more than 36 kg per module,

—a length of 1 400  mm or more but not more than 1 600  mm,

—a height of 340 mm or more but not more than 395 mm,

—a width of 220 mm or more but not more than 420 mm,

for use in the manufacture of vehicles of subheadings 8703 60 and 8703 80  (1)
1.3 %-31.12.2023
0.6753ex 8507 60 0077Lithium-ion rechargeable batteries, with:

—a length of 700 mm or more, but not more than 2 820  mm,

—a width of 935 mm or more, but not more than 1 660  mm,

—a height of 85 mm or more, but not more than 700 mm,

—a weight of 250 kg or more, but not more than 700 kg,

—a power of not more than 175 kWh,

—a nominal voltage of 400 V
1.3 %-31.12.2023
0.8275ex 8507 60 0083Modules for the assembly of ion lithium electric accumulators with:

—a length of 570 mm or more, but not more than 610 mm,

—a width of 210 mm or more, but not more than 240 mm,

—a height of 100 mm or more, but not more than 120 mm,

—a weight of 28 kg or more, but not more than 35 kg, and

—a capacity of not more than 2 500 Ah and a nominal energy of less than 7,5 kW,

for use in the manufacture of vehicles of subheadings 8703 60 , 8703 70 , 8703 80 and 8704 60 (1)
1.3 %-31.12.2023
0.8286ex 8507 60 0088A rechargeable lithium-ion battery, with:

—a fuse,

—a cell-to-pack design,

—a length of 1 050  mm or more but not more than 1 070  mm,

—a width of 624 mm or more but not more than 636 mm,

—a height of 235 mm or more but not more than 245 mm,

—a mass of 214,4 kg or more but not more than 227,6 kg,

—a capacity of 228 Ah,
1.3 %-31.12.2023
—an upper outer casing of a composite material,

—an IP68 protection rating,

—an energy density of 220Wh/l or more,

—a specific energy of 159 Wh/kg or more,

—without contactors,

for the manufacture of batteries for electric buses (1)
0.8419ex 8507 90 8020Top cap made of ferrous alloy or stainless steel:

—whether or not including parts made of aluminum and aluminum alloy,

—with sealing elements or other elements made of polymer material,

—with a ‘current interrupt device’ and an ‘evacuation valve’,

—with an outer diameter of 17 mm or more, but not more than 18 mm,

for use in the manufacture of lithium-ion batteries (1)
1.3 %-31.12.2023
0.5014ex 8508 70 00

ex 8537 10 98
20

98
Electronic circuit cards that:

—are connected by wire or radio frequency to each other and the motor controller card, and

—regulate the functioning (switching on or off and suction capacity) of vacuum cleaners according to a stored program,

—whether or not fitted with indicators that display the functioning of the vacuum cleaner (suction capacity and/or dust bag full and/or filter full)
0 %p/st31.12.2025
0.6304ex 8511 30 0030Igniter integrated coil assembly with:

—an igniter,

—a coil on plug assembly with an integrated mounting bracket,

—a housing,

—a length of 90 mm or more but not more than 200 mm (± 5 mm),

—an operating temperature of -40 °C or more but not more than 130 °C,

—a voltage of 10,5 V or more, but not more than 16 V
0 %p/st31.12.2024
0.7024ex 8511 30 0055Ignition coil:

—with a length of 50 mm or more, but not more than 200 mm,

—with an operating temperature of – 40 °C or more, but not more than 140 °C, and

—with a voltage of 9 V or more, but not more than 16 V,

—with or without connection cable,

for use in the manufacture of engines of motor vehicles (1)
0 %-31.12.2026
0.6856ex 8512 20 0030Lighting module, containing at least:

—two LEDs,

—glass or plastic lenses, focusing/scattering the light emitted by the LEDs,

—reflectors redirecting the light emitted by the LEDs,

in an aluminium housing with a radiator, mounted at a bracket with an actuator
0 %p/st31.12.2025
0.6503ex 8512 20 0040Fog lamp with a galvanised inner surface, containing:

—a plastic holder with three or more brackets,

—one or more 12 V bulbs,

—a connector,

—a plastic cover,

—whether or not with a connection cable

for use in the manufacture of goods of Chapter 87 (1)
0 %p/st31.12.2024
0.6562ex 8512 20 0060Information screen displaying:

—at least time, date and status of safety features in a vehicle, or

—safety information on driving in the lane, blind spot, distance from the vehicle in front, current speed, speed limit,

with an operating voltage of 12 V or more but not more than 14,4 V, of a kind used in the manufacturing of goods of Chapter 87
0 %p/st31.12.2024
0.8409ex 8512 20 0070Electrical component with light guide integrated with LED, for motor vehicles with:

—two parallel ribs in the front area with a distance between them of 1,4 mm or more but not more than 1,8 mm,

—four holes with the dimension of 7,3 mm or more but not more than 7,9 mm in the short direction of the guide, and

—a 3 pines connector,

for use in the manufacture of automotive components (1)
0 %-31.12.2027
0.8410ex 8512 20 0080Grab handle light with integrated LED, for motor vehicles:

—a distance between integrated spring clip and surface of 0,85 mm or more but not more than 1,85 mm,

—a length of the housing to two front vertical ribs of 26,45 mm or more but not more than 26,75 mm, and

—four horizontal ribs where the distance on the lower area over the base radia between the two is 18,5 mm or more but not more than 18,7 mm,

for use in the manufacture of automotive components (1)
0 %-31.12.2027
0.6504ex 8512 30 9010Horn assembly operating on piezomechanical principle for generating a specific sound signal, with a voltage of 12 V, comprising:

—coil,

—magnet,

—metal membrane,

—connector,

—holder

of a kind used in the manufacture of goods of Chapter 87
0 %p/st31.12.2024
0.6863ex 8512 30 9020Warning buzzer for parking sensor system in a plastic casing operating on the piezo-mechanic principle, containing:

—a printed circuit board,

—a connector,

—whether or not a metal holder,

for use in the manufacture of goods of chapter 87 (1)
0 %p/st31.12.2024
0.7361ex 8512 30 9030Sound alarm device for protection against burglary into the vehicle:

—with an operating temperature of – 45 °C or more, but not more than + 95 °C,

—with a voltage of 9 V or more but not more than 16 V,

—in a plastic housing,

—whether or not with a metal holder

for use in the manufacture of motor vehicles (1)
0 %-31.12.2024
0.5983ex 8512 40 00

ex 8516 80 20
10

20
Car door mirror heating foil:

—with two electrical contacts,

—with an adhesive layer on both sides (on the side of the plastic holder of the mirror and on the side of the mirror glass),

—with a protective paper film on both sides
0 %-31.12.2023
0.6522ex 8514 20 80

ex 8516 50 00

ex 8516 60 80
10

10

10
Cavity assembly comprising at least:

—a transformer with an input of not more than 240 V and an output of not more than 3 000 W

—an AC or DC fan motor with an output of not more than 42 watts

—a housing made of stainless steel

—with or without a magnetron of a microwave output power of not more than 900 W

for use in the manufacture of built-in products of headings 8514 20 80 , 8516 50 00 and 8516 60 80  (1)
0 %p/st31.12.2024
0.8391ex 8516 10 8010Tubular Heating Element with mounting flange for washing machines, with:

—a nominal output power of 1 700 W at 230 V AC supply voltage,

—a weight of 230 g or more but not more than 250 g,

—a thickness of the external flange of 2 mm or more,

—isolation bushes of steatite or ceramic, and

—no flat zones in the design,

for use in the manufacture of home appliance products and their components (1)
0 %p/st31.12.2027
0.4732ex 8516 90 0060Ventilation sub-assembly of an electric deep-fat fryer:

—fitted with a motor having a power rating of 8 W at 4 600  rpm,

—governed by an electronic circuit,

—operating at ambient temperatures above 110 °C,

—fitted with a thermoregulator
0 %p/st31.12.2024
0.5845ex 8516 90 0070Inner pot:

—containing side and central openings,

—of annealed aluminium,

—with a ceramic coating, heat resistant to more than 200° C

for use in the manufacture of an electric fryer (1)
0 %p/st31.12.2027
0.6521ex 8516 90 0080Door assembly incorporating a capacitive sealing element and wavelength choke for use in the manufacture of built-in products of headings 8514 20 80 , 8516 50 00 and 8516 60 80  (1)0 %p/st31.12.2024
0.4733ex 8521 90 0020Digital video recorder:

—without a hard disk drive,

—with or without a DVD-RW drive,

—with either motion detection or capability of motion detection through IP connectivity via LAN connector

—with or without a USB serial port,

for use in the manufacture of closed-circuit television (CCTV) surveillance systems (1)
0 %-31.12.2024
0.7972ex 8527 29 0040Satellite radio receiver module:

—with a rectangular shape of dimensions 41,7 x 32,4 x 3,85 mm (± 25 %),

—comprising of heat sink and a printed circuit board with resistors, capacitors, transistors, coils, diodes and IC,

—being able to process radio frequency signals,

—with a medium frequency unit,

for use in the manufacture of products falling under heading 8527 , 8528 , 8529  (1)
0 %-31.12.2025
0.6316ex 8528 59 0020Liquid crystal display colour video monitor assembly mounted on a frame,

—excluding those combined with other apparatus,

—comprising touch screen facilities, a printed circuit board with drive circuitry and power supply,

used for permanent incorporation or permanent mounting into entertainment systems for vehicles (1)
0 %-31.12.2024
0.6689ex 8529 90 6528Electronic assembly comprising at least:

—a printed circuit board with,

—one or more FPGAs (Field Programmable Gate Array) and/or processors for multi-media applications and video signal processing,

—operating memory,

—with or without flash memory,

—with or without one or more USB, HDMI, VGA-, RJ-45 and/or other multimedia interfaces,

—with or without sockets and plugs for connecting a LCD-display, a LED lighting and a control panel
0 %p/st31.12.2027
0.2434ex 8529 90 65

ex 8548 00 90
30

44
Parts of TV-apparatus, having micro-processor and video-processor functions, comprising at least a micro-controller and a video-processor, mounted on a leadframe and contained in a plastic housing0 %p/st31.12.2023
0.4140ex 8529 90 6550Tuner transforming high-frequency signals into mid-frequency signals, for use in the manufacture of products falling under heading 8528  (1)0 %p/st31.12.2026
0.4893ex 8529 90 65

ex 8529 90 92
65

53
Printed circuit board for distributing supply voltage and control signals directly to a control circuit on a TFT glass panel of a LCD module0 %p/st31.12.2025
0.4305ex 8529 90 6575Modules comprising at least semiconductor chips for:

—the generation of driving signals for pixel addressing, or

—driving addressing pixels
0 %p/st31.12.2027
0.3966ex 8529 90 92

ex 8548 00 90
15

60
LCD modules,

—solely consisting of one or more TFT glass or plastic cells,

—not combined with touch screen facilities,

—with one or more printed circuits boards with control electronics for pixel addressing only,

—with or without backlight unit and

—with or without inverters
0 %p/st31.12.2023
0.6654ex 8529 90 9237Fastening and covering ledges of aluminium alloy containing:

—silicon and magnesium,

—with a length of 300 mm or more but not more than 2 200  mm,

specifically shaped for use in the manufacture of TV sets (1)
0 %-31.12.2025
0.2425ex 8529 90 9242Aluminium heat sinks and cooling fins, for maintaining the operating temperature of transistors and integrated circuits, for use in the manufacture of products falling within heading 8527 or 8528  (1)0 %p/st31.12.2023
0.3198ex 8529 90 9243Plasma display module incorporating only address and display electrodes, with or without driver and/or control electronics for pixel address only and with or without a power supply0 %p/st31.12.2023
0.4030ex 8529 90 9245Integrated circuit package with TV reception functionality containing a channel decoder die, tuner die, power management die, GSM filters and discrete as well as embedded passive circuit elements for reception of digitally broadcasting videosignals of DVB-T and DVB-H formats0 %p/st31.12.2023
0.4609ex 8529 90 9247Area image sensors (“progressive scan” Interline CCD-Sensor or CMOS-Sensor) for digital video cameras in the form of analogue or digital, monolithic integrated circuit with pixels of not more than 12 μm × 12 μm in monochromic version with microlenses applied to each individual pixel (microlens array) or in polychromic version with a colour filter, whether or not with a lenslet (micro lens) array with one lenslet mounted on each individual pixel0 %p/st31.12.2024
0.4616ex 8529 90 92

ex 8536 69 90
49

83
AC socket with a noise filter, composed of:

—AC socket (for power cord connection) of 230 V,

—integrated noise filter composed of capacitors and inductors,

—cable connector for connecting an AC socket with the PDP (Plasma display panel) power supply unit,

whether or not equipped with a metal support, which joins the AC socket to the PDP TV set
0 %p/st31.12.2024
0.5187ex 8529 90 9257Metal holder, metal fixing item or internal stiffener of metal, for use in the manufacture of televisions, monitors and video players (1)0 %p/st31.12.2026
0.6629ex 8529 90 9263LCD module

—with a diagonal measurement of the screen of 14,5 cm or more but not more than 38,5 cm,

—with or without a touch screen,

—with an LED backlight,

—with a printed circuit board with EEPROM, microcontroller, LVDS receiver and other active and passive components,

—with a plug for power supply and CAN and LVDS interfaces,

—with or without electronic components for dynamic adjustments of colour,

—in a housing, with or without mechanical, touch-sensitive or contactless control functions and with or without active cooling system,

suitable for installation in motor vehicles of Chapter 87 (1)
0 %p/st31.12.2025
0.5018ex 8529 90 9267Colour LCD display panel for LCD monitors of heading 8528 :

—with a diagonal measurement of the screen of 14,48 cm or more but not more than 31,24 cm,

—with or without a touch screen,

—with backlight, micro-controller,

—with a CAN (Controller area network)-controller with one or more LVDS (Low-voltage differential signalling) interfaces and one or more CAN/power supply sockets or with an APIX (Automotive Pixel Link) controller with APIX interface,

—in a housing with or without a heat sink at the back of the housing,

—without a signal-processing module,

—whether or not with haptic and acoustical feedback,

for use in the manufacture of vehicles of Chapter 87 (1)
0 %p/st31.12.2025
0.5788ex 8529 90 9270Rectangular fastening and covering frame:

—of an aluminium alloy containing silicon and magnesium,

—with a length of 500 mm or more but not more than 2 200  mm,

—with a width of 300 mm or more but not more than 1 500  mm,

of a kind used for the production of TV sets
0 %p/st31.12.2027
0.8140ex 8529 90 9273CMOS-Image sensor

—with a micro lens on every pixel (micro lens coverage at least 99 % of all pixel),

—to capture infra-red light reflected from objects,

in order to capture depth images in the cameras built for distance measurements (Time-of-Flight)
0 %-31.12.2025
0.7489ex 8529 90 9278OLED modules, consisting of one or more TFT glass or plastic cells,

—a diagonal measurement of the screen of 121 cm or more, but not more than 224 cm,

—with a thickness of not more than 55mm,

—containing organic material,

—with control electronic for pixel addressing only,

—with V-by-One Interface and with or without a plug for power supply,

—with back cover,

of a kind used in the manufacture of TV sets and monitors
0 %-31.12.2023
0.6781ex 8529 90 9285Colour LCD module in a housing:

—with a diagonal screen measurement of 14.48 cm or more but not more than 26 cm,

—without touch screen,

—with a backlight and micro-controller,

—with a CAN (Controller Area Network) controller, an LVDS (Low-Voltage Differential Signalling) interface and a CAN/power connector,

—without a signal processing module,

—with control electronics for pixel addressing only,

—with a motorised mechanism for moving the display screen,

for permanent installation in vehicles of Chapter 87 (1)
0 %p/st31.12.2025
0.7048ex 8536 41 1020Photoelectric (so called photovoltaic) relay consisting of a GaAlAs light-emitting diode, a galvanically isolated input circuit with a photovoltaic generator and a power MOSFET output switch in a casing with connections for a voltage of 60 volts or less and a current of 2 amps or less0 %-31.12.2026
0.6180ex 8536 41 9040Power relay with:

—electromechanical and/or electromagnetical switching function,

—a load current of 3 A or more but not more than 16 A,

—a coil voltage of 5 V or more but not more than 24 V, and

—a distance between the connector pins of the load circuit not more than 15,6 mm
0 %p/st31.12.2024
0.7052ex 8536 49 0040Photoelectric (so called photovoltaic) relay consisting of two GaAlAs light-emitting diodes, two galvanically isolated input circuits with photovoltaic generator(s) and four power MOSFET output switches in a casing with connections for a voltage of more than 60 volts0 %-31.12.2026
0.7796ex 8536 49 0050Relay with:

—a contact current carrying capacity of 5 A or more but not more than 15 A,

—a nominal voltage of 80 V or more but not more than 270 V, and

—outer dimensions of 19 mm x 15,2 mm x 15,5 mm,

for use in the manufacture of control boards for household appliances (1)
0 %-31.12.2024
0.4614ex 8536 69 9082Modular socket or plug for local area networks, whether or not combined with other sockets, integrating at least:

—a pulse transformer, including a wide-band ferrite core,

—a common mode coil,

—a resistor,

—a capacitor,

for use in the manufacture of products falling within headings 8521 or 8528  (1)
0 %p/st31.12.2024
0.5028ex 8536 69 9084Universal serial bus (USB) socket or plug in a single or multiple form for connecting with other USB devices, for use in the manufacture of goods falling within headings 8521 or 8528  (1)0 %p/st31.12.2025
0.5318ex 8536 69 9085Socket or plug, built into a plastic or metal housing, with no more than 96 pins, for use in the manufacture of products falling within headings 8521 or 8528  (1)0 %p/st31.12.2026
0.5316ex 8536 69 9086High-Definition Multimedia Interface (HDMI) type socket or plug, built into a plastic or metal housing, with 19 pins or 20 pins in 2 rows, for use in the manufacture of products falling within headings 8521 or 8528  (1)0 %p/st31.12.2026
0.5181ex 8536 70 0010Optical socket, plug or connector, for use in the manufacture of goods falling within headings 8521 or 8528  (1)0 %p/st31.12.2026
0.7873ex 8537 10 9120Electronic assembly containing:

—a microprocessor,

—a programmable memory and other electronic components mounted on a printed circuit,

—with or without light-emitting diode (LED) or liquid crystal display (LCD) indicators,

for use in the manufacture of products of subheadings 8418 21 , 8418 29 , 8421 12 , 8422 11 , 8450 11 , 8450 12 , 8450 19 , 8451 21 , 8451 29 and 8516 60  (1)
0 %-31.12.2024
0.8405ex 8537 10 9125A control unit being a printed circuit board with at least:

—a microprocessor,

—a programmable memory,

—a single connector,

—a PPE housing,

—a supply of voltage of 220 V or more but not more than 240 V,

—a length of 200 mm or more but not more than 210 mm,

—a width of 70 mm or more but not more than 100 mm, and

—a height of 20 mm or more but not more than 30 mm,

for use in the manufacture of dishwashers (1)
0 %-31.12.2027
0.8392ex 8537 10 9135A control unit being a printed circuit board with at least:

—a microprocessor,

—a programmable memory,

—two or more connectors, but not more than twelve,

—with or without LCD display,

—with or without WiFi module, and

—with or without an integrated speaker,

for use in the manufacture of built-in ovens (1)
0 %-31.12.2027
0.8085ex 8537 10 9145Main hybrid system controller, diagnosing and controlling the elements of the hybrid propulsion system, with:

—a programmable memory,

—a microprocessor,

—at least one composite connector,

—a voltage of 24 V,

—with a length of 350 mm or more but not more than 400 mm,

—with a width of 200 mm or more but not more than 250 mm,

—with a height of 80 mm or more but not more than 120 mm,

—in a metal housing
0 %-31.12.2025
0.6864ex 8537 10 9150Fuse control module in a plastic housing with mounting brackets comprising:

—sockets with or without fuses,

—connecting ports,

—a printed circuit board with embedded microprocessor, micro switch and relay,

of a kind used in the manufacture of goods of chapter 87
0 %p/st31.12.2025
0.7627ex 8537 10 9157Programmable memory control board with:

—4 or more stepper motor drivers,

—4 or more outputs with MOSFET transistors,

—a main processor,

—3 or more inputs for temperature sensors,

—for a voltage of 10 V or more but not more than 30 V,

for use in the manufacture of 3D printers (1)
0 %-31.12.2023
0.7609ex 8537 10 9159Electronic control units for controlling inter axle torque transferring in all-wheel drive vehicles including:

—a printed circuit board with programmable memory controller,

—one single connector, and

—working at 12 V
0 %-31.12.2023
0.6163ex 8537 10 91

ex 8537 10 98
60

45
Electronic control units, manufactured according to class 2 of IPC-A-610E standard, with at least:

—an AC power input of 208 V or more but not more than 400 V,

—a logic power input of 24 V DC,

—an automatic circuit breaker,

—a main power switch,

—internal or external electrical connectors and cables,

—in a housing with dimension of 281 mm x 180 mm x 75 mm or more, but not more than 630 mm x 420 mm x 230 mm,

of a kind used for manufacturing recycling or sorting machines
0 %p/st31.12.2023
0.7610ex 8537 10 9163Electronic control units able to control automatic continuous variable transmission for passenger vehicles including:

—a printed circuit board with programmable memory controller,

—a metallic housing,

—one single connector,

—working at 12 V
0 %-31.12.2023
0.7660ex 8537 10 9167Electronic Engine Control Unit (ECU) with:

—a printed circuit board (PCB),

—12 Volts voltage,

—reprogrammable,

—a micro-processor that can control, evaluate and manage support service functions in cars (injection and ignition advance values of fuel, fuel and air flow rate),

for use in the manufacture of goods of Chapter 87 (1)
0 %-31.12.2023
0.7251ex 8537 10 9170Programmable motor memory controller for a voltage not exceeding 1 000 V, comprising at least:

—a printed circuit with active and passive components,

—an aluminium housing, and

—multiple connectors
0 %p/st31.12.2027
0.6140ex 8537 10 9830Motor bridge ICs without programmable memory consisting of:

—one or more integrated circuits, not interconnected, on separate lead frames,

—also with discrete Metal Oxide Field Effect Transistors (MOSFET) for controlling DC motors in cars

—mounted in a plastic housing
0 %p/st31.12.2023
0.7194ex 8537 10 9833Lever for control module under the steering wheel:

—with several single or multi-positional electrical switches (push-button, rotary or other),

—equipped with printed circuit boards and/or electrical cables,

—for a voltage of 9 V or more but not more than 16 V,

of a kind used in the manufacture of motor vehicles of Chapter 87
0 %p/st31.12.2026
0.6889ex 8537 10 9835Electronic control unit without memory, for a voltage of 12 V, for information exchange systems in vehicles (for connection of audio, telephony, navigation, camera and wireless car service) containing:

—2 rotary knobs

—27 or more pushbuttons

—LED lights

—2 integrated circuits for receiving and sending of control signals via the LIN-bus
0 %p/st31.12.2025
0.8401ex 8537 10 9838Control panel with switches for mirror, windows and other functions in vehicles, with:

—a total length of 144 mm or more but not more than 150 mm,

—a distance between intended screwing interface center points of 31 mm or more but not more than 31,50 mm, and

—electric components inside the panel with integrated LEDs,

for use in the manufacture of automotive components (1)
0 %-31.12.2027
0.6508ex 8537 10 9840Electronic control unit for monitoring car vehicle tyre pressure comprising plastic box with printed circuit board inside and with or without metal holder, of:

—a length of 50 mm or more, but not more than 120 mm,

—a width of 20 mm or more but not more than 40 mm,

—a height of 30 mm or more, but not more than 120 mm,

of a kind used in the manufacture of goods of Chapter 87
0 %p/st31.12.2024
0.8408ex 8537 10 9843Switch for motor vehicle seat regulation with a memory function, with:

—three single switches,

—a five-pin connector,

—for a voltage of 9 VDC or more but not more than 16 VDC, and

—electric components inside the panel with integrated LED,

for use in the manufacture of automotive components (1)
0 %-31.12.2027
0.8400ex 8537 10 9848Memory switch control panel for seat and lock switch for vehicles with:

—a width of 70,2 mm or more but not more than 70,5 mm,

—parallel ribs with a distance between them of 2,6 mm or more but not more than 2,8 mm on the rear side,

—a 5 pines connector, and

—electric components inside the panel with integrated LED,

for use in the manufacture of automotive components (1)
0 %-31.12.2027
0.6507ex 8537 10 9850Electronic control unit BCM (Body Control Module) comprising

—plastic box with printed circuit board and metal holder,

—with voltage of 9V or more, but not more than 16V,

—able to control, evaluate and manage functions of assisting services in an automobile, at least wiper timing, window heating, interior lighting, seat belt reminder

of a kind used in the manufacture of goods of Chapter 87
0 %p/st31.12.2024
0.8407ex 8537 10 9853A control unit being a printed circuit board with at least:

—a microprocessor,

—two or more connectors but not more than four,

—modified resins,

—a length of 180 mm or more but not more than 250 mm,

—a width of 130 mm or more but not more than 200 mm, and

—a height of 40 mm or more but not more than 60 mm,

for use in the manufacture of washing machines (1)
0 %-31.12.2027
0.8393ex 8537 10 9857A control unit being a printed circuit board with at least:

—a microprocessor,

—eight connectors or more but not more than eleven,

—a supply voltage of 215 V or more but not more than 245 V,

—a housing of PA6-MR30,

—with or without a transformer,

—with or without a high power relay,

—with or without insulated-gate bipolar transistor,

—a length of 280 mm or more but not more than 345 mm,

—a width of 400 mm or more but not more than 470 mm,

—a height of 28 mm or more but not more than 45 mm,

for use in the manufacture of induction stoves (1)
0 %-31.12.2027
0.6520ex 8537 10 9860Electronic assembly consisting of:

—a microprocessor,

—light-emitting diode (LED) or liquid crystal display (LCD) indicators,

—electronic components mounted on a printed circuit,

for use in the manufacture of built-in products of headings 8514 20 80 , 8516 50 00 and 8516 60 80  (1)
0 %p/st31.12.2024
0.8406ex 8537 10 9863A control unit being a printed circuit board with at least:

—a microprocessor,

—two connectors,

—a supply voltage of 215 V or more but not more than 245 V,

—no housing,

—a length of 100 mm or more but not more than 120 mm,

—a width of 40 mm or more but not more than 50 mm, and

—a height of 20 mm or more but not more than 30 mm,

for use in the manufacture of refrigerators (1)
0 %-31.12.2027
0.7171ex 8537 10 9875Control unit for keyless access to vehicle and vehicle starting, with electrical switching apparatus, in a plastic housing, for a voltage of 12 V, whether or not with:

—an antenna,

—a connector,

—a metal holder,

for use in the manufacture of goods of Chapter 87 (1)
0 %p/st31.12.2023
0.8132ex 8537 10 9880Propulsion Control System with at least:

—a DC/AC inverter,

—a power of 190 kW or more but not more than 220 kW,

—a high voltage circuits with AC and DC interfaces for connecting a traction motor, generator and energy storage system,

—an integral control of all drive motor and generator traction system functions,

—a CAN communications interface with System Control Unit,

—a liquid cooled system,
0 %p/st31.12.2025
—a length of 300 mm or more but not more than 950 mm,

—a width of 350 mm or more but not more than 600 mm,

—a height of 200 mm or more but not more than 350 mm,

—a weight of 40 kg or more but not more than 90 kg
0.8124ex 8537 10 9888Control panel for car radio and/or navigation control with:

—electronic passive components,

—at least two switches,

—LEDs,

—at least one connector,

—whether or not warning triangle switch,

—for a voltage not exceeding 16 V,

for use in the manufacture of goods of Chapter 87 (1)
0 %-31.12.2025
0.3663ex 8537 10 9893Electronic control units for a voltage of 12 V, for use in the manufacture of vehicle mounted temperature control systems (1)0 %p/st31.12.2023
0.6866ex 8538 90 91

ex 8538 90 99
20

50
Interior antenna for a car door locking system, comprising:

—an antenna module in a plastic housing,

—a connection cable with a plug,

—at least two mounting brackets,

whether or not PCB including integrated circuits, diodes and transistors,

for use in the manufacture of goods of Chapter 87 (1)
0 %p/st31.12.2025
0.6397ex 8538 90 99

ex 8547 20 00
30

10
Polycarbonate or acrylonitrile butadiene styrene covers and cases for steering pad switches whether or not coated on the outside with a scratch resistant paint0 %p/st31.12.2024
0.6399ex 8538 90 9940Polycarbonate control interface buttons for steering pad switches coated on the outside with scratch resistant paint, in immediate packages of 500 pieces or more0 %p/st31.12.2024
0.7195ex 8538 90 9960Front control panel, in the form of a plastic box, with light guides, rotary switches, pressure switches and buttons switches, or other type of switches, without any electrical component, of a kind used in the dashboard of motor vehicles of Chapter 870 %p/st31.12.2026
0.2580ex 8540 20 8091Photomultiplier0 %-31.12.2026
0.3959ex 8540 71 0020Continuous wave magnetron with:

—a fixed frequency of 2 460 MHz,

—a packaged magnet,

—a probe output,

—an output power of 960 or more but not more than 1 500  W
0 %-31.12.2023
0.3445ex 8540 89 0091Displays in the form of a tube consisting of a glass housing mounted on a board the dimensions of which do not exceed 300 mm × 350 mm excluding leads. The tube contains one or more rows of characters or lines arranged in rows, each character or line consisting of fluorescent or phosphorescent elements. These elements are mounted on a metallised base which is covered with fluorescent substances or phosphorescent salts which give off light when bombarded with electrons0 %-31.12.2023
0.3443ex 8540 89 0092Vacuum fluorescent display tube0 %-31.12.2023
0.7409ex 8540 91 0020Thermionic electron source (emitter point) of lanthanum hexaboride (CAS RN 12008-21-8) or cerium hexaboride (CAS RN 12008-02-5), in a metal housing with electric connectors having

—a graphite carbon shield mounted in a mini-Vogel type system

—separate pyrolytic carbon blocks used as heating elements and

—a cathode temperature of less than 1800 K at a filament current of 1,26 A
0 %-31.12.2027
0.7130ex 8543 70 9015Laminated electrochromic film consisting of:

—two outer layers of polyester,

—a middle layer of acrylic polymer and silicone, and

—two electric connection terminals
0 %-31.12.2026
0.8333ex 8543 70 9027Electronic control unit of the 360-degree vehicle situation display system with:

—an operating DC voltage of 9 V or more but not more than 16 V,

—a videoprocessor,

—a signal processor,

—one or more connectors, and

—whether or not with a metal mounting bracket,

for use in the manufacture of goods of Chapter 87 (1)
0 %-31.12.2027
0.2826ex 8543 70 9030Amplifier, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %p/st31.12.2023
0.7055ex 8543 70 9033High-frequency amplifier comprising one or more integrated circuits and one or more discrete capacitor chips, whether or not with IPD (integrated passive devices) on a metal flange in a housing0 %-31.12.2026
0.2822ex 8543 70 9035Radio frequency (RF) modulator, operating with a frequency range of 43 MHz or more but not more than 870 MHz, capable of switching VHF and UHF signals, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %p/st31.12.2023
0.2590ex 8543 70 9045Piezo-electric crystal oscillator with a fixed frequency, within a frequency range of 1,8 MHz to 67 MHz, contained in a housing0 %p/st31.12.2023
0.3131ex 8543 70 9055Opto-electronic circuit comprising one or more light-emitting diodes (LEDs), whether or not equipped with an integrated driving circuit, and one photodiode with amplifier circuit, whether or not with an integrated logic gate arrays circuit or one or more light-emitting diodes and at least 2 photodiodes with an amplifier circuit, whether or not with an integrated logic gate arrays circuit or other integrated circuits, contained in a housing0 %p/st31.12.2023
0.2820ex 8543 70 9080Temperature compensated oscillator, comprising a printed circuit on which are mounted at least a piezo-electric crystal and an adjustable capacitor, contained in a housing0 %p/st31.12.2023
0.2816ex 8543 70 9085Voltage controlled oscillator (VCO), other than temperature compensated oscillators, consisting of active and passive elements mounted on a printed circuit, contained in a housing0 %p/st31.12.2023
0.4464ex 8544 20 00

ex 8544 42 90

ex 8544 49 93
10

20

20
PET/PVC insulated flexible cable with:

—a voltage of not more than 60 V,

—a current of not more than 1 A,

—a heat resistance of not more than 105 °C,

—individual wires of a thickness of not more than 0,1 mm (± 0,01 mm) and a width of not more than 0,8 mm (± 0,03 mm),

—a distance between conductors of not more than 0,5 mm and

—a pitch (distance from centreline to centreline of conductors) of not more than 1,25 mm
0 %-31.12.2023
0.6709ex 8544 20 0030Antenna connecting cable for the transmission of radio (AM/FM) signal and whether or not GPS signal, containing:

—a coaxial cable,

—two or more connectors, and

—3 or more plastic clips for attachment to the dashboard

of a kind used in the manufacture of goods of Chapter 87
0 %-31.12.2026
0.6194ex 8544 30 0030Multi-measurement wire harness of a voltage of 5V or more but not more than 90 V capable of measuring some or all of the following;

—a travel speed of not more than 24 km/h

—a motor speed of not more than 4 500 rpm

—hydraulic pressure of not more than 25 MPa

—mass of not more than 50 metric tonnes

for use in the manufacture of vehicles of heading 8427  (1)
0 %p/st31.12.2023
0.6377ex 8544 30 00

ex 8544 42 90
40

40
Wire harness or cable for steering system:

—for an operating voltage of 12 V,

—with connectors on both sides,

—whether or not with anchor clamps of plastic for mounting on a motor vehicle steering box
0 %p/st31.12.2024
0.7848ex 8544 30 0045Linking seven-core cable for connecting sensor for pressure measure in intake manifold (Boost Pressure Sensor - BPS) and sockets for glow plugs with common connector, containing four sockets and two connectors for use in the manufacture of compression-ignition internal combustion piston engines for passenger car (1)0 %-31.12.2024
0.7847ex 8544 30 0055Connecting five-core cable with connectors for coupling the temperature sensor and the exhaust manifold pressure difference sensor to the common connector for use in the manufacture of compression-ignition internal combustion piston engines of passenger cars (1)0 %-31.12.2024
0.6710ex 8544 30 00

ex 8544 42 90
60

50
Four-core connecting cable containing two female connectors for the transmission of digital signals from navigation and audio systems to a USB connector, for use in the manufacture of goods of Chapter 87 (1)0 %-31.12.2025
0.8331ex 8544 30 0065Six core cable connecting the oil pressure sensor and the differential controller of vehicles:

—with PVC-coating,

—with three multiple connectors, and

—with or without plastic clip,

for use in the manufacture of goods of Chapter 87 (1)
0 %-31.12.2027
0.6323ex 8544 30 0070Multi-measurement wire harness:

—of a voltage of 5 V or more but not more than 90 V,

—capable of transmitting information

for use in the manufacture of vehicles of heading 8711  (1)
0 %p/st31.12.2024
0.6867ex 8544 30 0085Extension two-core cable with two connectors, containing at least:

—a rubber grommet,

—a metal attachment bracket,

of a kind used to connect vehicle speed sensors in the manufacture of vehicles of Chapter 87
0 %p/st31.12.2025
0.4980ex 8544 42 9010Data transmission cable capable of a bit rate transmission of 600 Mbit/s or more, with:

—a voltage of 1,25 V (± 0,25 V)

—connectors fitted at one or both ends, at least one of which contains pins with a pitch of 1 mm,

—outer screening shielding,

used solely for communication between LCD, PDP or OLED panel and video processing electronic circuits
0 %p/st31.12.2023
0.7545ex 8544 42 9015PVC isolated flexible eight wire cable with:

—a length of not more than 2 100  mm

—an operating voltage of 5V or more, but not more than 35 V

—a temperature resistance of not more than 80 °C

—either an over-moulded 7 pin round 270° DIN male connector, a 6 pin A1101 male connector or a 8 pin A1001 male connector on one end and

—at least two stripped and tinned wires on the other end

—whether or not with mounted rubber pad with integrated strain relief
0 %-31.12.2023
0.7538ex 8544 42 9025PVC isolated flexible cable with:

—a length of not more than 1 800  mm

—an operating voltage of 5V or more, but not more than 35V

—a heat resistance of not more than 80 °C

—an over-moulded 8 pin MiniFit male connector on one end

—either a 6 pin MiniFit socket or two over-moulded AMP connectors on the other end

—a over-moulded resistor inside the connector and

—a moulded strain relief on the cable

—whether or not with a over-moulded diode inside a connector
0 %-31.12.2023
0.7544ex 8544 42 9035PVC isolated flexible six or eight wire cable with:

—a length of not more than 1 300  mm

—an operating voltage of 5V or more, but not more than 35 V

—a heat resistance of not more than 80 °C

—either an over-moulded 8 pin MiniFit male connector or an over-moulded 6-pin DIN male connector on one end and

—either an over-moulded 8 pin MiniFit socket or an 8 pin MicroFit male connector on the other end
0 %-31.12.2023
0.6853ex 8544 42 9070Electric conductors:

—of a voltage of not more than 80 V,

—with a length of not more than 120 cm,

—fitted with connectors,

for use in the manufacture of hearing aids, accessory kits and speech processors (1)
0 %p/st31.12.2025
0.7173ex 8544 42 908012-wire connecting cable containing two connectors

—of a voltage of 5 V,

—with a length of not more than 300 mm

for use in the manufacture of goods of Chapter 87 (1)
0 %p/st31.12.2023
0.2424ex 8544 49 9310Elastomeric connector, of rubber or silicone, consisting of one or more conductor elements0 %p/st31.12.2023
0.6861ex 8544 49 9330Electric conductors:

—of a voltage of not more than 80 V,

—of a platinum-iridium-alloy,

—coated with poly(tetrafluoroethylene),

—without connectors,

for use in the manufacture of hearing aids, implants and speech processors (1)
0 %m31.12.2025
0.3144ex 8548 00 9041Unit, consisting of a resonator operating within a frequency range of 1,8 MHz or more but not more than 40 MHz and a capacitor, contained in a housing0 %p/st31.12.2023
0.3193ex 8548 00 9043Contact image sensor0 %p/st31.12.2023
0.3763ex 8548 00 9048Optical unit, containing at least

—a laser diode and a photodiode operating at a typical wavelength of 635 nm or more but not more than 815 nm

—an optical lens

—a “Recording Photodetector Integrated Circuit” (PDIC)

—a focussing and tracking actuator
0 %p/st31.12.2026
0.5183ex 8549 13 20

ex 8549 14 20
10

10
Spent lithium-ion or nickel metal hydride electric accumulators0 %-31.12.2023
0.7165ex 8708 10 10

ex 8708 10 90
10

10
Plastic cover for filling the space between the fog lights and the bumper whether or not with a chrome strip for use in the manufacture of goods of Chapter 87 (1)0 %p/st31.12.2026
0.6513ex 8708 30 10

ex 8708 30 91

ex 8708 30 99
20

60

10
Motor powered brake actuation unit

—with a rating of 13.5 V (±0.5V) and

—a ball screw mechanism to control brake fluid pressure in the master cylinder

for use in the manufacture of electric motor vehicles (1)
0 %p/st31.12.2024
0.6590ex 8708 30 10

ex 8708 30 91
40

30
Body of disc type brake in BIR (“Ball in Ramp”) or EPB (“Electronic Parking Brake”) or with hydraulic function only, containing functional and mounting openings and guide grooves, of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2024
0.6502ex 8708 30 10

ex 8708 30 91
60

20
Non-asbestos organic brake pads with friction material mounted to the band steel back plate for use in the manufacture of goods of Chapter 87 (1)0 %p/st31.12.2024
0.6707ex 8708 30 10

ex 8708 30 91
70

40
Ductile cast iron brake caliper jaw, of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2025
0.6869ex 8708 40 20

ex 8708 40 50
20

10
Automatic hydrodynamic gearbox

—with a hydraulic torque converter,

—without transfer box and cardan shaft,

—whether or not with front differential,

for use in the manufacture of motor vehicles of Chapter 87 (1)
0 %p/st31.12.2025
0.7383ex 8708 40 20

ex 8708 40 50
50

40
Transmission assembly which houses 3 other shafts inside it and offers a rotating switch for shift position consisting:

—cast aluminium body,

—differential gear,

—2 electrical motors and gears,

with the dimensions of:

—a width of 280 mm or more but not more than 470 mm,

—a height of 350 mm or more but not more than 595 mm,

—a length of 410 mm or more but not more than 690 mm,

for use in the manufacture of motor vehicles of Chapter 87 (1)
0 %-31.12.2024
0.7655ex 8708 40 20

ex 8708 40 50
60

50
Automatic transmission assembly with rotary gear shifter with:

—aluminium casting housing,

—differential gear,

—9 Speed automatic,

—electronic range select gear selection system,

with dimensions of:

—a width of 330 mm or more but not more than 420 mm,

—a height of 380 mm or more but not more than 450 mm,

—a length of 580 mm or more but not more than 690 mm,

for use in the manufacture of the vehicles in heading 87 (1)
0 %-31.12.2023
0.7856ex 8708 40 20

ex 8708 40 50
70

60
Manual gearbox in cast aluminium housing for transverse installation with:

—a width of not more than 480 mm,

—a height of not more than 400 mm,

—a length of not more than 550 mm,

—five or six gears,

—a differential gear,

—an engine torque of 400 Nm or less,

for use in the manufacture of motor vehicles of Heading 8703  (1)
0 %-31.12.2024
0.8279ex 8708 40 2080Transmission gearbox without torque converter, with:

—dual clutch,

—7 or more forward gears,

—1 reverse gear,

—a maximum torque of 390 Nm,

—whether or not with electric motor integrated,

—a height of 480 mm or more but not more than 600 mm,

—a width of 350 mm or more but not more than 450 mm, and

—a weight of 80kg or more but not more than 110 kg,

for use in the manufacture of motor vehicles of Heading 8703  (1)
0 %p/st31.12.2026
0.8377ex 8708 40 5070Automatic transmission equipped with double clutch system with:

—at least 8 gears,

—an engine torque of 800 Nm or more,

—an electronic differential,

—a P-lock safety system, and

—a TCU transmission control unit,

for use in the manufacture of motor vehicles of heading 8703  (1)
0 %-31.12.2027
0.7987ex 8708 50 20

ex 8708 50 55
15

50
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened0 %-31.12.2025
0.6648ex 8708 50 20

ex 8708 50 99
20

10
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle

—of a length of 1 m or more but not more than 2 m,

—of a weight of 6 kg or more but not more than 9 kg
0 %p/st31.12.2025
0.7988ex 8708 50 20

ex 8708 50 99
25

45
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with:

—6 ball tracks or more but not more than 8, with

—a thread,

—an external involute spline with 21 or more but not more than 38 teeth,

—for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %,

—forged, turned, milled and hardened
0 %-31.12.2025
0.7989ex 8708 50 20

ex 8708 50 99
35

50
Inboard constant velocity joint tripod housing, with:

—an outer diameter of 67,0 mm or more but not more than 99,0 mm,

—3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm,

—an external spline with 21 teeth or more but not more than 41,

—forged, turned, rolled and hardened
0 %-31.12.2025
0.7990ex 8708 50 20

ex 8708 50 99
45

55
Outboard constant velocity joint inner race, part of the vehicle's drive system, with:

—6 or more but not more than 8 ball tracks, suitable for bearing balls with a diameter of 12,0 mm or more but not more than 24,0 mm,

—forged, turned, milled, broached and hardened
0 %-31.12.2025
0.7359ex 8708 50 20

ex 8708 50 55

ex 8708 50 91

ex 8708 50 99
50

20

10

40
Double flange bearing of 3rd generation, for motor vehicles,

—with double-row ball bearing,

—whether or not with impulse (encoder) ring,

—whether or not with antilock brake system (ABS) sensor,

—whether or not with mounted screws,

for use in the manufacture of goods of chapter 87 (1)
0 %-31.12.2027
0.7991ex 8708 50 20

ex 8708 50 99
55

60
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with:

—3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm,

—forged, turned, broached and hardened
0 %-31.12.2025
0.7581ex 8708 50 20

ex 8708 50 99
60

15
Car transfer case with single input, dual output, to distribute torque between front and rear axles in an aluminium housing, with dimension of not more than 565 × 570 × 510 mm, comprising:

—at least an actuator,

—whether or not an interior distribution by chain
0 %-31.12.2024
0.7692ex 8708 50 20

ex 8708 50 99
65

20
Intermediate steel shaft connecting the gearbox with semi-axle with:

—a length of 300 mm or more but not more than 650 mm,

—a spline end on both sides,

—whether or not with a pressed bearing in the case,

—whether or not with a holder,

for use in the manufacture of goods of Chapter 87 (1)
0 %-31.12.2023
0.7593ex 8708 50 20

ex 8708 50 99
70

25
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with:

—an outer diameter of 67,0 mm or more but not more than 84,5 mm,

—3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,

—sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,

—spline with 21 teeth or more but not more than 35,

—bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves
0 %-31.12.2023
0.7640ex 8708 50 20

ex 8708 50 99
75

35
Outboard joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of:

—an inner race with 6 ball tracks for running with the bearing balls with a diameter 15,0 mm or more but not more than 20,0 mm,

—an outer race with 6 ball tracks for running with 6 bearing balls, made of steel with carbon content of 0,45 % or more but not more than 0,58 %, with thread and with a spline with 26 teeth or more but not more than 38,

—a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14 % or more but not more than 0,25 %, and

—with a grease compartment,

capable of working at constant speed at variable articulation angle not higher than 50 degrees
0 %-31.12.2023
0.6711ex 8708 80 20

ex 8708 80 35
10

10
Upper strut insulator containing:

—a metal holder with three mounting screws, and

—a rubber bump,

for use in the manufacture of goods of Chapter 87 (1)
0 %p/st31.12.2025
0.7607ex 8708 80 9920Aluminium suspension link arm, with dimensions of:

—a height of 50 mm or more but not more than 150 mm,

—a width of 10 mm or more but not more than 100 mm,

—a length of 100 mm or more but not more than 600 mm,

—a mass of 1 000  g or more but not more than 3 000  g,

equipped with at least two bushed holes made of aluminium alloy with the following characteristics:

—a tensile strength of 200 MPa or more,

—a strength of 19 kN or more,

—a stiffness of 5 kN/mm or more but not more than 9 kN/mm,

—a frequency of 400 Hz or more but not more than 600 Hz
0 %p/st31.12.2023
0.7365ex 8708 80 9930Surface-hardened, steel piston rod for a hydraulic or hydropneumatic shock absorber of motor vehicles:

—with a chrome coating,

—of a diameter of 11 mm or more, but not more than 28 mm,

—of a length of 80 mm or more, but not more than 600 mm,

with a threaded end or a mandrel for resistance welding
0 %-31.12.2027
0.6509ex 8708 91 20

ex 8708 91 35
20

10
Aluminium cooler using compressed air with a ribbed design of a kind used in the manufacture of goods of Chapter 870 %p/st31.12.2024
0.6859ex 8708 91 20

ex 8708 91 99
30

30
Aluminium alloy inlet or outlet air tank of heat exchangers for car cooling systems, manufactured to standard EN AC 42100 or EN AC 43000 T6 with:

—an insulating area flatness of not more than 0,1 mm,

—a permissible particle quantity of 0,3 mg per tank,

—a distance between pores of 2 mm or more,

—pore sizes of not more than 0,4 mm, and

—not more than 3 pores larger than 0,2mm,

—with a weight of 0,2 kg or more but not more than 3 kg
0 %p/st31.12.2025
0.7716ex 8708 91 3520Turbocharger cooling duct containing:

—an aluminum alloy duct with at least one metal holder and at least two mounting holes,

—a rubber pipe with clips,

—a stainless steel flange highly resistant to corrosion [SUS430JIL],

for use in the manufacture of compression ignition engines of motor vehicles (1)
0 %-31.12.2024
0.7231ex 8708 91 99

ex 8708 99 97
40

55
Assembly for supplying compressed air, whether or not with a resonator, comprising at least:

—one solid aluminium tube whether or not with mounting bracket,

—one flexible rubber hose, and

—one metal clip

for use in the manufacture of goods of Chapter 87 (1)
0 %-31.12.2024
0.7665ex 8708 92 9910Exhaust system inner liner:

—with a wall thickness of 0,7 mm or more but not more than 1,3 mm,

—made of stainless steel sheets or coil class 1.4310 and 1.4301 according to norm EN 10088,

—whether or not with mounting holes,

for use in the manufacture of exhaust systems for automobiles (1)
0 %-31.12.2023
0.7664ex 8708 92 9920Pipe for guiding exhaust gases from the combustion engine:

—with a diameter of 40 mm or more but not more than 100 mm,

—with a length of 90 mm or more but not more than 410 mm,

—with a wall thickness of 0,7 mm or more but not more than 1,3 mm,

—of stainless steel,

for use in the manufacture of exhaust systems for automobiles (1)
0 %-31.12.2023
0.7696ex 8708 92 9930Exhaust system end cover:

—with a wall thickness of 0,7 mm or more but not more than 1,3 mm,

—made of stainless steel class 1.4310 and 1.4301 according to norm EN 10088,

—whether or not with inner liner,

—whether or not with surface treatment,

for use in the manufacture of exhaust systems for automobiles (1)
0 %-31.12.2023
0.7849ex 8708 93 10

ex 8708 93 90
40

40
Clutch pedal with electronic parking brake connection (EPB), whether or not with sending signal function for:

—cruise control reset,

—electronic parking brake release,

—start and stop engine management under Idle Stop and Go system (ISG),

for use in the manufacture of passenger vehicles (1)
0 %-31.12.2024
0.6526ex 8708 94 20

ex 8708 94 35
10

20
Rack steering gear in aluminium housing with inner tie rod joints (axial joints) or with tie rods for use in the manufacture of goods of Chapter 87 (1)0 %p/st31.12.2024
0.6688ex 8708 95 10

ex 8708 95 99
20

30
Inflatable safety cushion of high strength polyamide fibre:

—sewn,

—folded,

—with three-dimensionally applied silicone bonding for air bag cavity forming and load-regulated air bag sealing,

—suitable for cool inflator technology
0 %p/st31.12.2025
0.6687ex 8708 95 10

ex 8708 95 99
30

40
Inflatable sewn safety cushion of high strength polyamide fibre:

—folded into three-dimensional packing form, fixed by thermal forming, dedicated fixation seams, fabric cover or plastic staples, or

—flat safety cushion with or without thermal folding
0 %p/st31.12.2025
0.8292ex 8708 95 9950Airbag inflator containing both pyrotechnics and cold gas as propellant for safety airbags of vehicles, in each individual consignment of 1 000 pieces or more0 %p/st31.12.2026
0.7444ex 8708 99 10

ex 8708 99 97
25

45
Plastic air guide for directing air flow to the surface of intercooler for use in the production of motor vehicles (1)0 %-31.12.2023
0.6583ex 8708 99 10

ex 8708 99 97
60

50
Aluminium engine bracket, with dimensions of:

—height of more than 10 mm but not more than 200 mm,

—width of more than 10 mm but not more than 250 mm,

—length of more than 10 mm but not more than 200 mm,

equipped with at least two fixing holes, made of aluminium alloys ENAC-46100 or ENAC-42100 (based on the norm EN:1706) with following characteristics:

—internal porosity not more than 1 mm,

—outer porosity not more than 2 mm,

—rockwell hardness HRB 10 or more,

of a kind used in the production of suspensions systems for engines in motor vehicles
0 %p/st31.12.2024
0.7921ex 8708 99 9718Hydrostatic speed changer:

—with a hydro pump and a differential with wheel axle,

—whether or not with a fan impeller and/or a pulley,

for use in the manufacture of tractors of subheadings 8701 91 90 and 8701 92 90 , whose main function is that of a lawn mower (1)
0 %p/st31.12.2023
0.8127ex 8708 99 9728A set of Type 4 H2 cylinders, in accordance with the EC 79 standard, consisting of two to eight cylinders on aluminum frames:

—cylinders made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin,

—with an operating pressure of not less than 35 MPa,

—with a durability declared by the manufacturer of not less than 20 years,

—with a cylinder capacity of 180 liters or more but not more than 375 liters,

—equipped with a set of solenoid, manual and safety PRD valves,
0 %-31.12.2025
—with a total width of 1 800  mm or more but not more than 2 300  mm,

—with a total height of 400 mm or more but not more than 500 mm,

—with a total length of 1 200  mm or more but not more than 3 600  mm
0.8128ex 8708 99 9738A set of Compressed Natural Gas (CNG) cylinders type CNG-4, in accordance with the ECE R110 standard, consisting of four or five cylinders on aluminum frames:

—made of high density polyethylene (HDPE) composite reinforced with a braid of glass and carbon fibers in epoxy resin,

—with an operating pressure of not less than 20 MPa,

—with a shelf life declared by the manufacturer of not less than 20 years,

—with a cylinder capacity of 315 liters or more but not more than 375 liters,

—equipped with a set of solenoid, manual and safety PRD valves,
0 %-31.12.2025
—with a total width of 2 200  mm or more but not more than 2 300  mm,

—with a total height of 450 mm or more but not more than 460 mm,

—with a total length of 3 500  mm or more but not more than 3 600  mm
0.6686ex 8714 10 9010Motorcycle fork rod inner tubes:

—of SAE1541 carbon steel,

—with a hard chromium layer of 20 μm (+ 15 μm/ – 5 μm),

—having a wall thickness of 1,3 mm or more, but not more than 1,6 mm,

—having an elongation at break of 15 %,

—perforated
0 %p/st31.12.2025
0.6848ex 8714 10 9070Motor bikes radiators in consignment of 100 pieces or more0 %p/st31.12.2027
0.6172ex 8714 91 30

ex 8714 91 30

ex 8714 91 30
25

35

72
Front forks, except rigid (non-telescopic) front forks made entirely of steel, for use in the manufacture of bicycles (including electric bicycles) (1)0 %-31.12.2023
0.6879ex 8714 96 1010Pedals, for use in the manufacture of bicycles (including electric bicycles) (1)0 %-31.12.2025
0.7421ex 8714 99 10

ex 8714 99 10
20

89
Bicycle handlebars:

—with or without an integrated stem,

—either made out of carbon fibres and synthetic resin or made of aluminium,

for use in the manufacture of bicycles (including electric bicycles) (1)
0 %-31.12.2027
0.7710ex 8714 99 50

ex 8714 99 50
11

91
Derailleur gears, consisting of:

—rear derailleur and mounting articles,

—with or without front derailleur,

for use in the manufacture of bicycles (including electric bicycles) (1)
0 %-31.12.2024
0.6878ex 8714 99 9030Seat posts, for use in the manufacture of bicycles (including electric bicycles) (1)0 %p/st31.12.2025
0.7708ex 8714 99 9040Stem for bicycle handlebars, for use in the manufacture of bicycles (including electric bicycles) (1)0 %-31.12.2024
0.3191ex 9001 10 9010Image reverser made up from an assembly of optical fibres0 %-31.12.2023
0.6402ex 9001 50 41

ex 9001 50 49
40

40
Organic uncut corrective eyeglass lens, finished on both sides, to undergo a coating, colouring, edging, mounting or any other substantial process for use in the manufacture of corrective glasses (1)0 %-31.12.2027
0.6401ex 9001 50 8030Round organic uncut, semi-finished eyeglass lens with corrective effect, finished on one side, of a kind used for the manufacture of finished eyeglass lenses0 %-31.12.2026
0.7590ex 9002 11 0018Lens assembly consisting of a cylinder-shaped cover made of metal or plastic and optical elements with:

—a horizontal field of view range to a maximum of 120 deg,

—a diagonal field of view range to a maximum of 105 deg,

—a focal length to a maximum of 7,50 mm,

—a relative aperture of a maximum of F/2,90,

—a maximum diameter of 22 mm
0 %-31.12.2023
0.5692ex 9002 11 0020Lenses:

—measuring not more than 95 mm × 55 mm × 50 mm,

—with a resolution of 160 lines/mm or better, and

—with a zoom ratio of 3 or more times
0 %-31.12.2027
0.7973ex 9002 11 0023Lenses with:

—motorized focus, zoom, aperture,

—electronically switchable infrared cut filter,

—an adjustable focal length not less than 2,7 mm and not more than 55 mm,

—a weight of not more than 100 g,

—a length of less than 70 mm,

—a diameter of not more than 60 mm
0 %-31.12.2025
0.7103ex 9002 11 0045Infrared optical unit

—with lenses of silicon, germanium or chalcogenide glass of a diameter not more than 62 mm (± 0,05 mm),

—whether or not mounted on a machined aluminium alloy support

of a kind used for thermal cameras or IP network cameras (1)
0 %-31.12.2026
0.3177ex 9002 11 0050Lens unit:

—having a focal length of 25 mm or more but not more than 150 mm,

—consisting of glass or plastic lenses, with a diameter of 60 mm or more but not more than 190 mm
0 %-31.12.2023
0.6572ex 9002 11 0085Lens assembly with:

—a horizontal field of view range of 20 deg or more, but not more than 200 deg,

—a focal length of 1,16 mm or more, but not more than 20 mm,

—a relative aperture of F/1,2 or more, but not more than F/4, and

—a diameter of 5 mm or more, but not more than 40 mm,

for use in the manufacture of CMOS automotive cameras or in IP network cameras production (1)
0 %-31.12.2024
0.3140ex 9002 90 0030Optical unit, comprising 1 or 2 rows of optical glass fibres in the form of lenses and with a diameter of 0,85 mm or more but not more than 1,15 mm, embedded between 2 plastic plates0 %p/st31.12.2023
0.5955ex 9025 80 4030Electronic barometric semiconductor pressure sensor in a housing, mainly consisting of

—a combination of one or more monolithic application-specific integrated circuits (ASIC) and

—at least one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material
0 %p/st31.12.2023
0.6288ex 9025 80 4050Electronic semiconductor sensor for measuring at least two of the following quantities:

—Atmospheric pressure, temperature, (also for temperature compensation), humidity, or volatile organic compounds,

—in a housing suitable for the automatic printing of conductor boards or Bare Die technology, containing :

—one or more monolithic application-specific integrated circuits (ASIC),

—one or more microelectromechanical sensor elements (MEMS) manufactured with semiconductor technology, with mechanical components arranged in three-dimensional structures on the semiconductor material,

of a kind used for incorporation into products of Chapter 84-90 and 95
0 %p/st31.12.2024
0.3292ex 9032 89 0030Electronic controller of electric power steering (EPS controller)0 %p/st31.12.2023
0.4253ex 9032 89 0040Digital valve controller for controlling liquids and gases0 %p/st31.12.2027
0.7004ex 9032 89 0050Gas panel for regulating and controlling of the gas flow rate, working with plasma technology, comprising

—an electronic mass flow regulator, suitable for receiving and sending of analogue and digital signals

—four pressure transducers,

—two or more pressure valves,

—electric interfaces and

—several connectors for gas lines

—suitable for in-situ plasma bonding processes or for multi frequency bond activating processes
0 %-31.12.2026
0.5025ex 9401 99 9010Ratchet disk for use in the manufacture of reclining car seats (1)0 %p/st31.12.2025
0.4846ex 9503 00 75

ex 9503 00 95
10

10
Plastic cable car scale models, whether or not with a motor, for printing (1)0 %p/st31.12.2025
0.6950ex 9607 20 1010Sliders, narrow tape with mounted zipper teeth, pin/boxes and other parts of slide fasteners, of base metal for use in the manufacture of zippers (1)0 %-31.12.2024
0.6949ex 9607 20 9010Narrow strips mounted with plastic chain scoops for use in the manufacture of zippers (1)0 %-31.12.2025
0.3286ex 9608 91 0010Non-fibrous plastic pen-tips with an internal canal0 %-31.12.2023
0.3289ex 9608 91 0020Felt tips and other porous-tips for markers, without internal canal0 %-31.12.2023
0.2737ex 9612 10 1010Ribbons of plastic with segments of different colours, providing the penetration of dyes by heat into a support (so called dye-sublimation)0 %-31.12.2023

.

(1) Suspension of duties is subject to end-use customs supervision in accordance with Article 254 of Regulation (EU) No 952/2013.

(2) However, the suspension of tariff duties does not apply where the processing is carried out by retail or catering undertakings.

(3) Only the ad valorem duty is suspended. The specific duty shall continue to apply.

(4) A surveillance of imports of goods covered by this tariff suspension shall be established in accordance with the procedure laid down in Articles 55 and 56 of Commission Implementing Regulation (EU) 2015/2447 of 24 November 2015 laying down detailed rules for implementing certain provisions of Regulation (EU) No 952/2013 of the European Parliament and of the Council laying down the Union Customs Code (OJ L 343, 29.12.2015, p. 558).

(5) CUS (Customs Union and Statistics Number) is assigned to each ECICS record (product). ECICS (European Customs Inventory of Chemical Substances) is an information tool managed by the European Commission, General Directorate for Taxation and Customs Union. More information can be found via the following link: http://ec.europa.eu/taxation_customs/common/databases/ecics/index_en.htm.’