Decision 2006/691 - 2006/691/EC: Commission Decision of 12 October 2006 amending, for the purposes of adapting to technical progress, the Annex to Directive 2002/95/EC as regards exemptions for applications of lead and cadmium (notified under document number C(2006) 4790) - Main contents

EN

Official Journal of the European Union

L 283/48

Directive 2002/95/EC requires the Commission to evaluate certain hazardous substances prohibited pursuant to Article 4(1) of that Directive.

Certain materials and components containing lead and cadmium should be exempted from the prohibition, since the use of these hazardous substances in those specific materials and components is still unavoidable, or because the negative environmental, health or consumer safety impacts caused by substitution are likely to outweigh the environmental, health or consumer safety benefits thereof. The exemptions listed in the annex to this decision are granted on the basis of the results of a review process carried out by technical experts taking into account available evidence from studies, stakeholders and other scientific/technical sources. This review concluded that the elimination or substitution of the substances is still technically or scientifically impracticable.

Some exemptions from the prohibition for certain specific materials or components should be limited in their scope, in order to achieve a gradual phase-out of hazardous substances in electrical and electronic equipment, given that the use of those substances in such applications will become avoidable.

Pursuant to Article 5(1)(c) of Directive 2002/95/EC each exemption listed in the Annex must be subject to a review at least every four years or four years after an item is added to the list.

Directive 2002/95/EC should therefore be amended accordingly.

Pursuant to Article 5(2) of Directive 2002/95/EC, the Commission has consulted the relevant parties.

The measures provided for in this Decision are in accordance with the opinion of the Committee established by Article 18 of Directive 2006/12/EC of the European Parliament and of the Council (2),

Lead and cadmium in printing inks for the application of enamels on borosilicate glass.

Lead as impurity in RIG (rare earth iron garnet) Faraday rotators used for fibre optic communications systems.

Lead in finishes of fine pitch components other than connectors with a pitch of 0.65 mm or less with NiFe lead frames and lead in finishes of fine pitch components other than connectors with a pitch of 0.65 mm or less with copper lead frames.

Lead in solders for the soldering to machined through hole discoidal and planar array ceramic multilayer capacitors.

Lead oxide in plasma display panels (PDP) and surface conduction electron emitter displays (SED) used in structural elements; notably in the front and rear glass dielectric layer, the bus electrode, the black stripe, the address electrode, the barrier ribs, the seal frit and frit ring as well as in print pastes.

Lead oxide in the glass envelope of Black Light Blue (BLB) lamps.

Lead alloys as solder for transducers used in high-powered (designated to operate for several hours at acoustic power levels of 125 dB SPL and above) loudspeakers.’