Implementing regulation 2016/1240 - Rules for the application of Regulation 1308/2013 with regard to public intervention and aid for private storage - Main contents

COMMISSION IMPLEMENTING REGULATION (EU) 2016/1240

of 18 May 2016

laying down rules for the application of Regulation (EU) No 1308/2013 of the European Parliament and of the Council with regard to public intervention and aid for private storage

(Text with EEA relevance)

THE EUROPEAN COMMISSION,

Having regard to the Treaty on the Functioning of the European Union,

Having regard to Regulation (EU) No 1308/2013 of the European Parliament and of the Council of 17 December 2013 establishing a common organisation of the markets in agricultural products and repealing Council Regulations (EEC) No 922/72, (EEC) No 234/79, (EC) No 1037/2001 and (EC) No 1234/2007 (1), and in particular Article 20(a), (b), (d), (e), (i), (j), (k), (l), (m), (n) and (o), and Article 223(3)(a), (b) and (c) thereof,

Having regard to Regulation (EU) No 1306/2013 of the European Parliament and of the Council of 17 December 2013 on the financing, management and monitoring of the common agricultural policy and repealing Council Regulations (EEC) No 352/78, (EC) No 165/94, (EC) No 2799/98, (EC) No 814/2000, (EC) No 1290/2005 and (EC) No 485/2008 (2), and in particular Article 62(2)(a), (b), (c) and (i), and Article 64(7)(a) thereof,

Having regard to Council Regulation (EU) No 1370/2013 of 16 December 2013 determining measures on fixing certain aids and refunds related to the common organisation of the markets in agricultural products (3), and in particular Article 2(3) and Article 3(4) thereof,

Whereas:

HAS ADOPTED THIS REGULATION:

TITLE I

GENERAL PROVISIONS

CHAPTER I

Introductory provision

Article 1

Scope

• 1. 

  This Regulation lays down rules for the application of Regulation (EU) No 1308/2013 and Regulation (EU) No 1370/2013 as regards:

• 2. 

  This Regulation shall apply without prejudice to specific provisions laid down in Implementing Regulations:

CHAPTER II

General common rules

Article 2

Submission and admissibility of offers, tenders and applications

• 1. 

  Operators shall lodge offers and tenders for public intervention as well as tenders and applications for aid for private storage using the method made available by the paying agency of the Member State concerned.

• 2. 

  An offer, tender or application shall be admissible if it is submitted in the official language or one of the official languages of the Member State in which the offer, tender or application is submitted, and shall include, on a form made available by the paying agency, at least the following information:

• 3. 

  The offer, tender or application shall not include any additional conditions introduced by the operator other than those laid down in this Regulation or in the relevant Implementing Regulation opening the tendering procedure or fixing the amount of aid for private storage in advance.

• 4. 

  Where the time limit for the submission of offers, tenders or applications is a public holiday, the offers, tenders or applications shall be submitted at the latest on the last working day preceding the public holiday.

• 5. 

  Offers, tenders or applications submitted on a Saturday, Sunday or public holiday shall be deemed to be received by the paying agency on the first working day following the day on which they were submitted.

• 6. 

  Offers, tenders or applications shall not be withdrawn or amended after their submission.

• 7. 

  The paying agency shall register the admissible offers, tenders or applications and the quantities concerned on the day on which they are received.

• 8. 

  The rights and obligations resulting from the acceptance of the offer, tender or application shall not be transferable.

TITLE II

PUBLIC INTERVENTION

CHAPTER I

Specific rules related to public intervention

Article 3

Intervention storage places

• 1. 

  Each intervention storage place (‘storage place’) shall have a minimum storage capacity of:

Member States with an average annual production of cereals of less than 20 million tonnes may continue to apply from the 2019/20 period a minimum storage capacity of 10 000 tonnes.

• 2. 

  For the purposes of this Article, the ‘minimum storage capacity’ means a minimum capacity which may not be available permanently, but is readily achievable during the period when buying-in might take place.

• 3. 

  A paying agency may derogate from paragraph 1 only where it demonstrates that the minimum storage capacity specified in that paragraph is not available and where the replacement storage places have ready access to a river, a sea or a railway connection.

Article 4

Establishing the eligibility of products

• 1. 

  The eligibility of products for public intervention shall be established in accordance with the methods laid down in the following provisions:

• 2. 

  The methods to be used to determine the quality of cereals for public intervention referred to in Annex I shall be those established by the latest versions of the relevant European or international standards, as the case may be, in force on the first day of each marketing year.

CHAPTER II

Buying-in of products into intervention

Section 1

General provisions

Article 5

Minimum quantities of products offered or tendered

• 1. 

  The minimum quantity of products offered or tendered for buying-in shall be:

Member States with an average annual production of cereals of less than 20 million tonnes may decide to apply a minimum quantity of 120 tonnes for common wheat, barley and maize.

• 2. 

  A paying agency may set a minimum quantity higher than that provided for in paragraph 1 if justified by the conditions and practices of the wholesale trade or environmental rules in force in the Member State concerned.

Article 6

Level of the security for buying-in of products

The level of the security required in accordance with Article 4(a) of Delegated Regulation (EU) 2016/1238 when submitting an offer or tender for the buying-in of products into public intervention shall be:

Article 7

Submission and admissibility of offers and tenders

• 1. 

  An offer or tender shall be admissible if it complies with the requirements laid down in Article 2 and, in the case of a tendering procedure, in the Implementing Regulation opening the tendering procedure referred to in Article 12. It shall also meet the following conditions:

• 2. 

  For products other than beef, the operator may request on the form referred to in Article 2(2) that the product be taken over at the storage place where it is held at the time the offer or tender is submitted provided that the storage place fulfils the requirements laid down in Article 7(1) of Delegated Regulation (EU) 2016/1238 and in Article 3 of this Regulation.

Article 8

Verification of offers and tenders by the paying agency

• 1. 

  The paying agencies shall decide on the admissibility of offers and tenders on the basis of the requirements laid down in Articles 2 and 7.

Where the paying agency decides that an offer or tender is inadmissible, it shall inform the operator concerned within three working days of the receipt of the offer or tender. For offers, if the operator does not receive such information, the offer is considered as being admissible.

• 2. 

  As regards cereals and rice, the declarations referred to in Article 7(1)(c) may be checked for compliance by administrative means after the paying agency has verified that the offers or tenders are admissible, if necessary with the assistance of the paying agency competent for the storage place indicated by the operator, in accordance with Article 57(2).

Article 9

Notifications of offers and tenders to the Commission

• 1. 

  Member States shall notify the Commission of all admissible offers and tenders within the following time limits:

• 2. 

  The notifications provided for in points (a) and (b) of paragraph 1 shall not contain the operator's name, address and VAT registration number and, in the case of butter and skimmed milk powder, the name and approval number of the approved undertaking.

• 3. 

  Where a Member State does not notify the Commission of an admissible offer or tender within the time limits referred to in points (a) and (b) of paragraph 1, it shall be deemed to have notified the Commission of a nil return.

Section 2

Buying-in at fixed price

Article 10

Submission of offers for buying-in of common wheat, butter and skimmed milk powder at fixed price

Offers may be submitted to the paying agency from the beginning of the public intervention periods laid down in Article 12 of Regulation (EU) No 1308/2013.

Article 11

Measures for respecting the quantitative limitations

• 1. 

  In order to comply with the quantitative limitations fixed in Article 3(1) of Regulation (EU) No 1370/2013, the Commission shall decide as provided for in Article 3(6)(a) of that Regulation:

The Commission shall decide within two working days of the notification referred to in the first subparagraph of point (a) of Article 9(1), and within five working days of the notification referred to in the third subparagraph of point (a) of Article 9(1).

For the purposes of this Article, when a date of notification is a public holiday for the Commission the counting of the deadline shall start on the first working day after that public holiday. If such public holidays are included in the time period for the Commission's decision, only working days shall be counted.

• 2. 

  By way of derogation from Article 2(6), an operator to whom an allocation coefficient as referred to in point (b) of paragraph 1 applies may withdraw his offer within five working days of the date of entry into force of the decision setting the allocation coefficient.

Section 3

Buying-in via a tendering procedure

Article 12

Tendering procedure

• 1. 

  A tendering procedure for the buying-in of products referred to in Article 11 of Regulation (EU) No 1308/2013 shall be opened by way of an Implementing Regulation opening the tendering procedure, which shall contain, in particular, the following information:

• 2. 

  The Commission may open a tendering procedure for buying-in of beef by category and Member State, or region thereof, as provided for in Article 13(1)(c) of Regulation (EU) No 1308/2013, on the basis of the two most recent weekly market prices recorded. The Commission may close that tendering procedure, as provided for in Article 13(2) of that Regulation, on the basis of the most recent weekly market prices recorded.

• 3. 

  If the Commission opens a restricted tendering procedure as referred to in Article 3(3) of Regulation (EU) No 1370/2013, the Implementing Regulation opening that procedure shall refer to the specific Member State or region(s) of a Member State covered by the tendering procedure.

• 4. 

  With regard to rice, the tendering procedure may be restricted to specific varieties or one or more types of paddy rice, namely ‘round grain rice’, ‘medium grain rice’, ‘long grain rice A’ or ‘long grain rice B’, as defined in points (a), (b) or (c) of point I.2 of Part I of Annex II to Regulation (EU) No 1308/2013.

• 5. 

  With regard to beef, the following rules shall apply:

Article 13

Submission and admissibility of tenders

• 1. 

  In addition to the general conditions laid down in Articles 2 and 7, a tender shall only be admissible if it indicates a proposed price in euro per unit of measurement of the product rounded to no more than two decimal places, exclusive of VAT.

In the case of cereals and rice, the price tendered per tonne of products shall be a price corresponding to the minimum quality for cereals defined in Part II of Annex I to Delegated Regulation (EU) 2016/1238 or to the standard quality for rice defined in Section A of Annex III to Regulation (EU) No 1308/2013, delivered to the storage place, not unloaded.

In the case of butter and skimmed milk powder, the tendered price shall be the price per 100 kg of products delivered to the loading bay of the storage place.

In the case of beef, tenders shall state the price quoted in accordance with Article 12(5)(a), expressed per tonne of products of quality R3, and if it relates to bone-in meat intended for deboning, or for storage without deboning.

• 2. 

  Without prejudice to Article 15(2) of this Regulation, the price tendered shall not exceed the level of the public intervention price set out in Article 2(1) of Regulation (EU) No 1370/2013.

Article 14

Decisions on the buying-in price

• 1. 

  On the basis of the tenders notified in accordance with Article 9, the Commission shall decide:

• 2. 

  The decision referred to in paragraph 1 shall be published in the Official Journal of the European Union.

Article 15

Individual decisions on tenders

• 1. 

  Where no maximum buying-in price has been fixed, all tenders shall be rejected.

• 2. 

  Where a maximum buying-in price has been fixed, the paying agency shall accept tenders which are equal to or lower than that amount. All the other tenders shall be rejected.

The paying agency shall only accept tenders that have been notified to the Commission in accordance with Article 9.

• 3. 

  The paying agency shall take the decisions referred to in paragraphs 1 and 2 of this Article after the publication of the decision of the Commission referred to in Article 14(1).

The paying agency shall notify the operators of the outcome of their participation in the tendering procedure within three working days of the entry into force of that decision of the Commission.

This notification shall not be necessary when the tender is accepted, if the paying agency issues a delivery order as referred to in Article 17 within five working days of the entry into force of that decision of the Commission. In case of such acceptance, no further extension of the time limit for the issue of the delivery order, as referred to in the second subparagraph of Article 17(1), may be granted.

Article 16

Limitation of buying-in for beef

Where the paying agencies are offered beef in quantities greater than they are able to take over, they may limit the buying-in to the quantities they can take over in their territory or in one of their intervention regions referred to in Article 12(5).

Paying agencies shall ensure equal access for all parties concerned in the event of such limitation.

Section 4

Deliveries and transport costs

Article 17

Delivery order

• 1. 

  After the paying agency has checked the admissibility of the offer or tender in accordance with Articles 8 and 13, it shall issue the delivery order within five working days of the deadline referred to in the second subparagraph of Article 11(1) or of the entry into force of the decision referred to in Article 14(1).

The paying agency may decide to extend the time limit for the issue of the delivery order when it is necessary due to high quantities of cereals or rice accepted. However, the final date for delivery of the products shall not be later than 65 days after the deadline or entry into force referred to in the first subparagraph. In such cases the paying agency shall inform the affected operators.

• 2. 

  The delivery order shall be dated and numbered and shall contain the following information:

• 3. 

  The delivery order shall be issued only for quantities notified to the Commission as provided for in Article 9.

Article 18

Specific provisions for the delivery of cereals and rice

• 1. 

  The paying agency shall designate the storage place to which the cereals or rice shall be delivered at lowest cost.

• 2. 

  Delivery to the storage place shall occur not later than 60 days following the date of issue of the delivery order. However, depending on the quantities accepted, the paying agency may extend that period by up to 14 days. In such cases the delivery period referred to in the second subparagraph of Article 17(1) may be extended accordingly. The paying agency shall inform the affected operators.

• 3. 

  The operator shall bear the costs relating to the following tests carried out for cereals in accordance with the methodology referred to in Part IV of Annex I:

Article 19

Transport costs for cereals and rice

• 1. 

  The cost of transporting the cereals or rice from the place where the product was stored at the time of the offer or tender to the storage place specified in the delivery order shall be borne by the operator, where the distance involved is equal to or less than 50 km.

Beyond that maximum distance, the additional transport costs shall be borne by the paying agency and reimbursed by the Commission at a rate per tonne and per kilometre of EUR 0, 05.

• 2. 

  Where the paying agency which buys-in the cereals or rice is in a Member State other than the one in whose territory the product is stored, no account shall be taken, in calculating the maximum distance referred to in paragraph 1, of the distance between the store of the operator and the border of the Member State of the purchasing paying agency.

Article 20

Specific provisions for the delivery of beef

• 1. 

  The buying-in price for beef shall be the price of the beef delivered to the entrance weighing point of the storage place or, where the meat is to be deboned, at the cutting plant.

• 2. 

  The costs of unloading shall be borne by the operator.

• 3. 

  Operators shall deliver the products not later than 15 days following the date of issue of the delivery order. However, depending on the quantities awarded, the paying agency may extend that period by up to seven days. In such cases the paying agency shall inform the affected operators.

Article 21

Specific provisions for the packing, delivery and storage of butter and skimmed milk powder

• 1. 

  Butter shall be packed and delivered in blocks of 25 kilograms net in accordance with the requirements laid down in Part II of Annex IV.

• 2. 

  Skimmed milk powder shall be packed and delivered in bags of a net weight of 25 kilograms in accordance with the requirements laid down in Part II of Annex V.

• 3. 

  The operator shall deliver the butter or skimmed milk powder to the loading bay of the storage place within 21 days of the date of issue of the delivery order. However, depending on the quantities accepted, the paying agency may extend that period by up to seven days. In such cases the paying agency shall inform the affected operators.

The butter and skimmed milk powder shall be delivered on pallets of a quality suitable for long-term storage, to be exchanged against equivalent pallets. Alternatively, an equivalent system may be approved by the paying agency.

The costs incurred in unloading the butter or skimmed milk powder at the loading bay of the storage place shall be borne by the paying agency.

• 4. 

  The paying agency shall require that butter and skimmed milk powder be placed and kept in storage on pallets in such a way as to create easily identifiable and readily accessible lots.

Article 22

Delivery

• 1. 

  The date of delivery shall be:

• 2. 

  The paying agency may decide that the takeover of cereals, rice, butter or skimmed milk powder takes place in the storage place where the products are held at the time the offer or tender is submitted, provided that the storage place fulfils the requirements laid down in Article 7(1) of Delegated Regulation (EU) 2016/1238 and in Article 3 of this Regulation. In that case, the date of delivery shall be the day following the date of issue of the delivery order and shall serve as the relevant date for the purposes of Article 18(2)(a) of Implementing Regulation (EU) No 908/2014.

• 3. 

  The products shall be taken over by the paying agency or its representative, who shall be independent from the operator.

Section 5

Control and takeover

Article 23

The takeover record

• 1. 

  The takeover record shall be issued by the paying agency after the required checks and analyses have established that the eligibility requirements laid down in Article 3 of Delegated Regulation (EU) 2016/1238 are fulfilled. It shall indicate at least:

• 2. 

  The takeover record shall be dated and sent to the operator and to the storekeeper.

Article 24

Obligations of the operator

The products shall meet the eligibility requirements set out in Article 3 of Delegated Regulation (EU) 2016/1238. Where the required checks show that the products do not fulfil the eligibility requirements, the operator shall:

The costs to be paid by the operator shall be determined on the basis of standard amounts for entry, removal and storage costs in accordance with Article 3 of Commission Delegated Regulation (EU) No 906/2014 (17).

Article 25

Deboning requirement for beef

Where deboning is required as a condition of the tendering procedure, the paying agency shall have all the beef that is bought-in deboned in accordance with Part III of Annex III.

Section 6

Price adjustments and payments

Article 26

Price adjustments for cereals and rice

• 1. 

  The price adjustment as provided for in Articles 2(2) and 3(4) of Regulation (EU) No 1370/2013 shall be made in accordance with:

• 2. 

  If the paying agency takes over and stores cereals and rice at the storage place in accordance with Article 22(2), a reduction of EUR 5/tonne shall be made to the buying-in price.

Article 27

Payments

• 1. 

  Payments for the quantities stated in the takeover record shall be made no later than the 65th day following the date of delivery referred to in Article 22, unless an administrative inquiry is under way.

• 2. 

  Only the quantity actually delivered and accepted shall be paid for. However, if that quantity is greater than the quantity stated in the delivery order, only the quantity specified in the delivery order shall be paid for.

CHAPTER III

Sale of products from intervention

Article 28

Opening of the tendering procedure

• 1. 

  Products taken over into public intervention and available for sale shall be sold through a tendering procedure.

• 2. 

  The tendering procedure shall be opened by way of an Implementing Regulation opening the sale.

The first closing date for submission of tenders shall be fixed not earlier than six days after the publication of that Implementing Regulation in the Official Journal of the European Union.

• 3. 

  Tendering procedures may be open for the sale of products stored in one or several regions of the Union or a Member State.

• 4. 

  The Implementing Regulation opening the sale shall contain, in particular, the following information:

• 5. 

  Tendering procedures may be restricted to specified uses or destinations and include provisions for verifying the use or destination.

Article 29

Notice of invitation to tender and arrangements related to the invitation to tender

• 1. 

  Each paying agency holding intervention stocks available for sale shall draw up a notice of invitation to tender, and publish it at least four days before the first date for the submission of tenders.

• 2. 

  The notice of invitation to tender shall indicate in particular:

• 3. 

  The paying agency shall ensure that notices of invitation to tender are properly publicised.

• 4. 

  The paying agency shall make the necessary arrangements to enable interested parties:

Article 30

Submission and admissibility of tenders

• 1. 

  A tender shall be admissible if it complies with the requirements laid down in Article 2 and the Implementing Regulation opening the sale. It shall also meet the following conditions:

• 2. 

  For cereals, the tendered price shall refer to the minimum quality defined in Part II of Annex I to Delegated Regulation (EU) 2016/1238 or, for rice to the standard quality defined in Section A of Annex III to Regulation (EU) No 1308/2013.

• 3. 

  For beef, butter and skimmed milk powder, the tendered price shall apply to net weight.

For butter, where appropriate, the tender may specify that it is submitted exclusively for sweet cream butter as referred to in Article 29(2)(g).

Article 31

Notification of tenders to the Commission

• 1. 

  Member States shall notify the Commission of all admissible tenders within the time limits set in the Implementing Regulation opening the sale.

• 2. 

  The notifications provided for in paragraph 1 shall not contain the operator's name, address and VAT registration number.

• 3. 

  Where a Member State does not notify the Commission of an admissible tender within the time limits referred to in paragraph 1, it shall be deemed to have notified the Commission of a nil return.

Article 32

Decisions on the selling price

• 1. 

  On the basis of the tenders notified in accordance with Article 31, the Commission shall decide, in accordance with the procedure referred to in Article 229(2) of Regulation (EU) No 1308/2013:

For butter and skimmed milk powder the minimum selling price may vary according to the location of the products offered for sale.

• 2. 

  The decision referred to in paragraph 1 shall be published in the Official Journal of the European Union.

Article 33

Individual decisions on tenders

• 1. 

  Where no minimum selling price has been fixed, all tenders shall be rejected.

• 2. 

  Where a minimum selling price has been fixed, the paying agencies shall reject any tender lower than the minimum selling price.

The paying agencies shall only accept tenders that have been notified to the Commission in accordance with Article 31.

• 3. 

  The paying agencies shall take the decisions referred to in paragraphs 1 and 2 of this Article after the publication of the decision of the Commission referred to in Article 32.

The paying agency shall notify the operators of the outcome of their participation in the tendering procedure within three working days of the entry into force of that decision of the Commission.

Article 34

Specific rules for the allocation of beef, butter and skimmed milk powder

• 1. 

  For butter and skimmed milk powder, the successful operator shall be the operator offering the highest price. If the full quantity available is not allocated, the remainder shall be awarded to the other operators on the basis of the prices tendered, starting with the highest price.

• 2. 

  Where acceptance of a tender would result in contracts being awarded in excess of the quantity of beef, butter or skimmed milk powder available at a particular storage place, only the quantity available shall be awarded to the operator in question. However, with the agreement of the operator, the paying agency may allocate product from other storage places to fulfil the tender quantity.

• 3. 

  Where acceptance of two or more tenders offering the same price at a particular storage place would lead to contracts being awarded in excess of the available quantity of beef, butter or skimmed milk powder, the award shall be made by allocating the quantity available in proportion to the quantities tendered for. However, if such allocation leads to the award of quantities of less than the minimum quantity referred to in Article 28(4)(c), the award shall be made by drawing lots.

• 4. 

  Where after the acceptance of all successful tenders the quantity of beef, butter or skimmed milk powder left at the storage place is less than the minimum quantity referred to in Article 28(4)(c), the remaining quantity shall be offered by the paying agency to the successful operators starting with the one who offered the highest price. The successful operators shall be offered the option to buy the remaining quantity at the minimum selling price.

• 5. 

  The paying agency shall allocate the product on the basis of its date of entry into storage, starting with the oldest product of the total quantity available at the storage place designated by the operator or, as the case may be, the oldest of the quantity of butter or sweet cream butter or cut of beef available in the cold storage place designated by the operator.

Article 35

Payments

Before removing the product and within the period specified in Article 37(2), operators shall pay the paying agency the amount corresponding to their tender for each quantity that they withdraw from the storage place, as notified by the paying agency in accordance with Article 33(3).

Article 36

Sales by Member States

• 1. 

  In a Member State where no tendering procedure is open in accordance with Article 28, the paying agency may itself open a tendering procedure for the sale of intervention products when the total quantity remaining in all its storage places is less than:

• 2. 

  Chapter II of Delegated Regulation (EU) 2016/1238 and this Chapter shall apply to a tendering procedure opened by a paying agency in accordance with paragraph 1, with the exception of Articles 28(2), 29(2)(b), 30(1)(a) and (e), 31 and 32(2) of this Regulation. Article 32(1) shall apply mutatis mutandis to a respective decision of the Member State.

• 3. 

  Within the quantities fixed in paragraph 1, paying agencies may put up for direct sale products which, after visual examination in the context of the annual stocktaking in accordance with point (g) of the first subparagraph of Article 3(3) and Article 3(4) of Delegated Regulation (EU) No 907/2014 or during the inspection after taking into intervention, may no longer be repackaged or are deteriorated.

• 4. 

  The paying agencies shall ensure equality of access for all parties concerned.

Article 37

Removal order

• 1. 

  On payment of the amount referred to in Article 35, the paying agency shall issue a removal order indicating:

• 2. 

  The operators shall remove the product awarded to them within 30 days of the notification referred to in Article 33(3). After that period of time the costs and risks shall be borne by the operator.

Article 38

Removal of butter and skimmed milk powder

• 1. 

  At the time of removal from the storage place and in the case of delivery outside the storage place, the paying agency shall make the butter and skimmed milk powder available on pallets at the loading bay of the storage place, and loaded onto the means of transport where it is a lorry or a railway wagon. The costs involved shall be borne by the paying agency.

• 2. 

  The operator shall return equivalent quality pallets to the paying agency on removal from the storage place. Alternatively, an equivalent arrangement may be agreed with the paying agency.

• 3. 

  Any stowage and depalletising costs shall be borne by the operator of the butter or skimmed milk powder.

TITLE III

AID FOR PRIVATE STORAGE

CHAPTER I

Specific rules for aid for private storage

Section I

General provisions

Article 39

Opening of tendering procedures and fixing aid in advance

• 1. 

  The Implementing Regulation opening the tendering procedure or fixing the amount of aid in advance may contain the following information:

• 2. 

  Where the granting of aid for private storage is restricted to certain Member States or regions of a Member State as referred to in Article 18(2)(b) of Regulation (EU) No 1308/2013, tenders and applications may be lodged only in the Member State(s) concerned.

• 3. 

  In the case of tenders, at least six days shall elapse between the entry into force of the Implementing Regulation opening the tendering procedure and the first date for the submission of tenders.

Article 40

Submission and admissibility of tenders and applications for aid for private storage

A tender or application for aid for private storage shall be admissible if it complies with the requirements laid down in Article 2 and the following conditions are met:

Article 41

Verification of tenders and applications by the paying agency

• 1. 

  The paying agency shall decide on the admissibility of tenders and applications on the basis of the conditions set out in Articles 2 and 40.

• 2. 

  Where the paying agency decides that a tender or application is inadmissible, it shall inform the operator concerned within three working days of the receipt of the tender or application.

Article 42

Notification of tenders and applications to the Commission

• 1. 

  Member States shall notify the Commission of all admissible tenders and applications within the following time limits:

• 2. 

  The notifications provided for in points (a) and (b) of paragraph 1 shall not contain the operators' name, address and VAT registration number.

• 3. 

  Where a Member State does not notify the Commission of an admissible tender or application within the time limits referred to in points (a) and (b) of paragraph 1, it shall be deemed to have notified the Commission of a nil return.

Section II

Fixing the amount of aid for private storage via a tendering procedure

Article 43

Decisions on the maximum amount of aid for private storage

• 1. 

  On the basis of the tenders notified in accordance with Article 42, the Commission shall decide, as provided for in Article 4(2)(a) of Regulation (EU) No 1370/2013:

• 2. 

  Where the tender is subject to a global quantity as referred to in Article 39(1)(g), and if the award of the total quantities for which that amount has been offered would lead to the global quantity being exceeded, the Commission shall, in accordance with the procedure referred to in Article 229(2) of Regulation (EU) No 1308/2013, adopt a decision fixing an allocation coefficient. The coefficient shall apply to the tenders which have been received at the level of the maximum amount of aid.

By way of derogation from Article 2(6), an operator to whom an allocation coefficient applies may withdraw his tender within 10 working days of the date of entry into force of the decision fixing the allocation coefficient.

• 3. 

  Decisions on aid referred to in paragraphs 1 and 2 shall be published in the Official Journal of the European Union.

Article 44

Individual decisions on tenders

• 1. 

  Where no maximum amount of aid for private storage has been fixed, all tenders shall be rejected.

• 2. 

  Where a maximum amount of aid has been fixed, the paying agency shall accept tenders which are equal to, or lower than that amount, without prejudice to Article 43(2). All the other tenders shall be rejected.

The paying agency shall only accept tenders that have been notified in accordance with Article 42.

• 3. 

  The paying agency shall take the decisions referred to in paragraphs 1 and 2 of this Article after the publication of the decision of the Commission referred to in Article 43(1).

The paying agency shall notify operators of the outcome of their participation in the tendering procedure within three working days of the entry into force of that decision of the Commission.

Section III

Fixing the amount of aid for private storage in advance

Article 45

Decisions on applications for aid for private storage fixed in advance

• 1. 

  For products already in storage, an admissible application shall be deemed to have been accepted on the eighth working day following the date of receipt of that application, provided that the Commission does not adopt a decision in accordance with paragraph 3 in the interim.

• 2. 

  For products that are not already stored, decisions on acceptance of an admissible application shall be notified by the paying agency to the operator on the eighth working day following the date of receipt of that application, provided that the Commission does not adopt a decision in accordance with paragraph 3 in the interim.

• 3. 

  Where an examination of the situation reveals that excessive use has been made of the aid for private storage scheme, or that there is a risk of excessive use or speculation, the Commission may, without applying the procedure referred to in Article 229(2) or (3) of Regulation (EU) No 1308/2013, decide to:

By way of derogation from Article 2(6), an operator to whom point (b) of the first subparagraph applies may withdraw his application within 10 working days of the date of entry into force of the decision setting the percentage reduction.

Section IV

Placing of products into private storage

Article 46

Information related to the place of private storage for products not yet in storage

Following receipt of the notification referred to in the second subparagraph of Article 44(3) or the notification of the decision referred to in Article 45(2), the operator shall notify the paying agency of the timeframe for the entry of products into storage, the name and address of each place of private storage and the corresponding quantities. The notification shall be provided to the paying agency at least five working days before the start of the placing lots into storage. The paying agency may decide to accept a shorter period than five working days.

Article 47

Placing into storage of products not yet in storage

• 1. 

  Products shall be placed into storage within 28 days following the notification referred to in the second paragraph of Article 44(3) in the case of tenders, or the notification of the decision referred to in Article 45(2) in the case of applications.

• 2. 

  For meat, placing in storage shall begin, for each individual lot of the quantity covered by the tender or application, on the day on which it comes under the control of the competent authority. That day shall be the day on which the net weight of the fresh or chilled product is determined:

• 3. 

  Placing into storage shall be considered completed on the day on which the last individual lot of the quantity covered by the tender or application is placed in storage.

CHAPTER II

Storage contracts

Section I

Conclusion of contracts

Article 48

Contractual storage period

• 1. 

  The contractual storage period starts on the day following:

• 2. 

  The last day of the contractual storage period may be fixed in the Implementing Regulation opening the tendering procedure or fixing the amount of aid for private storage in advance, as referred to in Article 39(1)(f).

By way of derogation from Article 3(4) of Council Regulation (EEC, Euratom) No 1182/71 (18), when the last day of the contractual storage period falls on Saturday, Sunday or a public holiday, the contractual storage period shall end with the expiry of the last hour of that day.

Article 49

Conclusion of contracts

Contracts shall be concluded between the paying agency of the Member State in the territory of which the products are stored or will be stored and operators fulfilling the requirements laid down in Article 2 of Delegated Regulation (EU) 2016/1238 from whom a tender or application has been accepted.

Contracts shall be concluded for the quantity actually placed in storage (the ‘contractual quantity’), which shall not exceed the quantity referred to the second paragraph of Article 44(3) in the case of tenders, or the quantity in the application in respect of products already in store, or the notification of the decision referred to in Article 45(2) in the case of applications for products not yet in store.

Where the quantity actually placed in storage is less than 95 % of the quantity in the tender or application, or the quantity arising from the application of Article 45(3)(b), no contract shall be concluded.

Contracts shall not be concluded where the eligibility of the products is not confirmed.

Article 50

Notification of conclusion of contracts

The paying agency shall notify the successful operator of a contract considered as being concluded within five working days of the date of issue of the control report referred to in Article 61(1), subject to receiving all of the documents necessary for concluding the contract.

The date of conclusion of the contract shall be that on which the paying agency notifies the operator.

Section II

Elements of the contract and obligations of the operator

Article 51

Elements of the contract

The contract shall be construed as including, where appropriate, the elements provided for in Article 52, as well as those provided for in:

Article 52

Obligations of the operator

• 1. 

  Contracts shall cover at least the following obligations for the operator:

• 2. 

  By way of derogation from point (a)(ii) of paragraph 1, the paying agency may authorise a relocation of the stored products under the following conditions:

• 3. 

  By way of derogation from point (e) of paragraph 1 of this Article, sugar subject to a contract may be stored in a silo designated by the operator with other sugar provided that the contractual quantity is kept in storage in the designated silo during the contractual period in accordance with Article 8(1) of Delegated Regulation (EU) 2016/1238.

• 4. 

  The operator shall, on request, make available to the paying agency responsible for checking all documentation, for each contract, allowing in particular the following information on the products placed in storage to be verified:

• 5. 

  The operator or, where applicable, the storekeeper shall keep a register at the warehouse covering, by contract number:

CHAPTER III

Removal of products and payment of aid for private storage

Section I

Removal of products from storage

Article 53

Removal from storage

• 1. 

  Removal from storage may start on the day following the last day of the contractual storage period or, as the case may be, from the date specified in the Implementing Regulation opening the tendering procedure or fixing the amount of aid for private storage in advance.

• 2. 

  Removal from storage shall be in whole storage lots unless the paying agency authorises removal in smaller quantities.

However, in the case of sealed products as referred to in Article 60, only a sealed quantity may be removed from store.

• 3. 

  Where in the Implementing Regulation opening the tendering procedure or fixing the amount of aid for private storage in advance, the contractual storage period is specified as being between a period of days, the operator shall notify the paying agency of the intention to begin removing products from storage, indicating the storage lots/batches/vats/silos involved, at least five working days before the start of removal operations.

The paying agency may decide to accept a shorter period than five working days.

Section II

Payment

Article 54

Application for payment of aid for private storage

The operator shall lodge an application for payment within three months of the end of the contractual storage period.

Article 55

Payment of aid for private storage

Payment of the aid shall be made not later than 120 days following the date on which an application for payment is lodged provided that the obligations of the contract have been met.

However, if an administrative inquiry is under way, payment shall not be made until entitlement has been recognised.

TITLE IV

CHECKS AND PENALTIES

CHAPTER I

Checks

Article 56

General provisions on checks relating to public intervention and aid for private storage

• 1. 

  Paying agencies shall take all necessary measures to ensure compliance with the requirements relating to public intervention and the granting of aid for private storage laid down in Delegated Regulation (EU) 2016/1238, this Regulation and the Implementing Regulations referred to in Article 1(2)(a) and (b) of this Regulation.

The measures shall include full administrative checking of offers and tenders for public intervention and tenders and applications for aid for private storage, which shall be supplemented by on-the-spot documentary and physical checks as specified in this Title.

• 2. 

  The verification of the weight of products delivered to public intervention and, in the case of aid for private storage, of the contractual quantity shall be conducted in the presence of the officials of the paying agency.

• 3. 

  Physical samples taken for the purposes of verifying the quality and composition of products for public intervention and aid for private storage shall be taken by the officials of the paying agency or in their presence.

• 4. 

  For the purposes of the audit trail, all stock and financial records and documents checked by the paying agency shall be stamped or initialled during the control visit. Where computer records are verified, a record of the check undertaken shall be included in the inspection file, either in paper or in electronic form. Such records shall be made available to the Commission on request.

Article 57

Specific provisions on checks relating to public intervention

• 1. 

  Without prejudice to the checks required by this Regulation for the takeover of products, the checks of the intervention stocks shall be carried out in accordance with Article 3 of Delegated Regulation (EU) No 907/2014.

• 2. 

  Where the storage place referred to in Article 7(1)(a)(ii) is in a Member State other than that where the offer or tender is submitted, the paying agency that received the offer or tender may request assistance from the paying agency responsible for that storage place, including an on-site check. The assistance shall be provided within the period requested by the paying agency that received the offer or tender.

• 3. 

  For beef, the checks shall be carried out in accordance with Parts I and III of Annex III.

Article 58

Specific provisions on checks relating to public intervention for cereals and rice

• 1. 

  Notwithstanding Article 56(2), the quantity delivered shall be weighed in the presence of the operator and a representative of the paying agency who is independent from the operator.

However, if the representative of the paying agency is also the storekeeper, the paying agency shall, within 30 days of the date of delivery, conduct an inspection involving at least a volumetric check. Any difference between the quantity determined by weighing and the quantity estimated in accordance with the volumetric method shall not exceed 5 %.

Where the 5 % tolerance is not exceeded, the storekeeper shall bear all costs relating to any difference observed, at a later weight check, from the weight entered in the accounts on takeover.

Where the 5 % tolerance is exceeded, the cereals or rice shall be weighed forthwith. Where the weight determined is less than that recorded, the costs of weighing shall be borne by the storekeeper. Otherwise, the costs of weighing shall be borne by the paying agency.

• 2. 

  Where the level of contaminants in cereals is to be checked on the basis of the risk analysis referred to in point 3 of Part I of Annex I to Delegated Regulation (EU) 2016/1238, the paying agency shall be liable for the financial consequences of any failure to comply with the maximum contaminant levels in accordance with the rules set out in Article 3(6) of Delegated Regulation (EU) No 907/2014.

However, in the case of ochratoxin A and aflatoxin, if the paying agency concerned is able to prove to the Commission's satisfaction that the standards were met on entry, that normal storage conditions were observed and that the storekeeper's other commitments were respected, the financial liability shall be borne by the Union budget.

Article 59

Specific provisions for the takeover in storage place of the storekeeper for cereals and rice

• 1. 

  If the takeover of cereals or rice takes place at the storage place where the products are held at the time the offer or tender is submitted, the quantity taken over shall be established on the basis of the store register, which shall fulfil professional standards which allow to guarantee compliance with Union legislation, in particular with Annex III to Delegated Regulation (EU) No 907/2014, and provided that:

• 2. 

  If paragraph 1 applies, the weight to be recorded in the store register and financial accounts provided for in point (a) of the first subparagraph of Article 3(3) of Delegated Regulation (EU) No 907/2014 shall be that entered in the store register and adjusted, where appropriate, to take account of any difference between the moisture content or the percentage of miscellaneous impurities (Schwarzbesatz) recorded at the moment of weighing and those determined on the basis of the representative sample. A difference between the percentages of miscellaneous impurities may only be taken into account to reduce the weight entered in the store register.

Within 30 days of takeover the paying agency shall make a volumetric check. Any difference between the quantity determined by weighing and the quantity estimated in accordance with the volumetric method shall not exceed 5 %.

Where the 5 % tolerance is not exceeded, the storekeeper shall bear all costs relating to any difference observed, at a later weight check, from the weight entered in the accounts on takeover.

Where the 5 % tolerance is exceeded, the cereals or rice shall be weighed forthwith. Where the weight determined is less than that recorded, account being taken of the tolerance limits provided for in point 1 of Annex IV to Delegated Regulation (EU) No 907/2014, the costs of weighing shall be borne by the storekeeper. Otherwise, the costs of weighing shall be borne by the European Agricultural Guarantee Fund.

Article 60

Specific provisions on checks relating to aid for private storage

• 1. 

  For all the lots put into storage, the paying agency shall undertake on-the-spot documentary checks within 30 days of the start of the contractual storage period referred to in Article 48(1) in order to verify the contractual quantity referred to in Article 49. Such checks shall include an examination of the store register referred to in Article 52(5) and of supporting documents, such as weigh tickets and delivery dockets, as well as physical verification of the presence of the lots and the identity of the products in the place of private storage.

In the case of meat, the checks shall take place at the time of placing into private storage, and for olive oil, prior to the official sealing of the vats.

In duly justified circumstances, the paying agency may extend the period referred to in the first subparagraph by up to 15 days. In such cases, the paying agency shall inform the affected operators.

• 2. 

  In addition to the checks required under paragraph 1, a representative statistical sample of at least 5 % of the lots covering at least 5 % of the total quantities placed in storage shall be physically checked to ensure that the quantity, nature and composition, packaging and marking of the products and storage lots conform to the requirements for private storage and to the particulars specified by the operator in their tender or application.

In the case of cheese, physical checks shall be undertaken on all lots in order to verify the contractual quantity.

• 3. 

  During the storage period, the paying agency shall also undertake unannounced on-the-spot checks to ensure the presence and identity of the contractual quantity in the place of private storage, and that sugar stored in bulk is present in the silo designated by the operator. The check shall be undertaken on the basis of a random statistical sample of at least 5 % of the lots covering at least 5 % of the total quantities for which contracts have been concluded. This sample shall not include more than 25 % of lots already checked in accordance with paragraph 2, unless it would not be possible to conduct the on-the-spot check of at least 5 % of the lots covering at least 5 % of the total quantities for which contracts have been concluded.

The unannounced check referred in the first subparagraph shall not be necessary where the paying agency, with the agreement of the operator, has sealed the products in such a way that the contractual quantities cannot be removed from the place of storage without breaking seal.

• 4. 

  At the end of the contractual storage period, or before the start of the removal of products where Article 53(3) applies, the paying agency shall undertake on-the-spot checks to verify that the contractual commitment has been met based on a documentary check of the store register and supporting documents, as well as a verification of the presence of the lots and the identity of the products in the place of private storage.

In addition to the checks referred to in the first subparagraph, a representative statistical sample of at least 5 % of the lots covering at least 5 % of the total quantities for which contracts have been concluded shall be physically checked to verify the quantity, type, packaging and marking and identity of the products in the place of private storage.

• 5. 

  Where the paying agency, with the agreement of the operator, has sealed the products in such a way that the stored quantity cannot be removed from the individual lot without breaking seal, the checks referred to in paragraphs 3 and 4 may be limited to verifying the presence and integrity of the seals.

Article 61

Reporting of checks

• 1. 

  The paying agency shall draw up a control report within five working days of the completion of each on-the-spot check undertaken and, if appropriate, of the checks referred to in Article 56(3). The report shall describe precisely the different items checked and shall set out:

The report shall be signed by the responsible paying agency official and either countersigned by the operator or, where applicable, by the storekeeper, or sent to the operator by registrable means. The report shall be included in the payment file.

• 2. 

  In case of non-compliance of products subject to the check, the verification shall be extended to a larger statistical sample to be determined by the paying agency.

• 3. 

  The paying agency shall record any cases of non-compliance on the basis of the criteria of gravity, extent, duration and repetition that may result in exclusion in accordance with Article 62(1), or in the repayment of unduly paid, aid for private storage, including interest where applicable, in accordance with Article 62(4).

CHAPTER II

Penalties and administrative measures

Article 62

Penalties and administrative measures in relation to aid for private storage

• 1. 

  Where the paying agency finds that a document presented by an operator, which is required under Delegated Regulation (EU) 2016/1238, this Regulation or an Implementing Regulation referred to in Article 1(2)(b) of this Regulation, provides incorrect information, and where the incorrect information concerned is decisive for the granting of aid for private storage, the paying agency shall exclude the operator from the procedure of granting aid for the product for which the incorrect information has been given for a period of one year from the date of adoption of a final administrative decision establishing the irregularity.

• 2. 

  The exclusion provided for in paragraph 1 shall not apply if the operator proves, to the satisfaction of the paying agency, that the situation referred to in that paragraph is due to force majeure or obvious error.

• 3. 

  Unduly paid aid shall be recovered, with interest, from the operators concerned. The rules laid down in Article 27 of Implementing Regulation (EU) No 908/2014 shall apply mutatis mutandis.

• 4. 

  Implementation of administrative penalties and recovery of unduly paid amounts, as provided for in this Article, are without prejudice to communication of irregularities to the Commission pursuant to Commission Regulation (EC) No 1848/2006 (19).

TITLE V

NOTIFICATIONS AND FINAL PROVISIONS

CHAPTER I

Notifications

Section I

General provisions on notifications

Article 63

Method of notification

The notifications referred to in this Regulation, as well as in Implementing Regulations referred to in Article 1, shall be made in accordance with Commission Regulation (EC) No 792/2009 (20).

Article 64

Notifications concerning paying agencies

• 1. 

  Member States shall notify the Commission of the approved paying agencies responsible for intervention buying-in and sales and for aid for private storage.

• 2. 

  The Commission shall make available to the Member States and to the public the list of approved paying agencies, including by way of publication on the internet.

Section II

Notifications as regards public intervention

Article 65

Notifications of information on intervention stocks

• 1. 

  Member States whose paying agencies hold intervention stocks shall notify the Commission, not later than the 15th of each month, of the following items:

2   The Commission may request that notifications provided for in paragraph 1 be made with an increased frequency where that is necessary for the purposes of the efficient management of the intervention system.

• 3. 

  For the purposes of point (b) of paragraph 1:

• 4. 

  For the purposes of point (c) of paragraph 1:

Section III

Notifications as regards aid for private storage

Article 66

Notification of information on private storage

Member States in which the aid for private storage scheme is used shall notify the Commission:

CHAPTER II

Final provisions

Article 67

Entry into force and application

This Regulation shall enter into force on the seventh day following that of its publication in the Official Journal of the European Union.

It shall apply as from 1 October 2016. However, as regards buying-in to public intervention, Tables III and IV of Part V and Point (b) of Part VI of Annex I shall apply as of 1 July 2017.

This Regulation shall be binding in its entirety and directly applicable in all Member States.

Done at Brussels, 18 May 2016.

For the Commission

The President

Jean-Claude JUNCKER

• (1) 

  OJ L 347, 20.12.2013, p. 671.

• (2) 

  OJ L 347, 20.12.2013, p. 549.

• (3) 

  OJ L 346, 20.12.2013, p. 12.

• (4) 

  Council Regulation (EC) No 1234/2007 of 22 October 2007 establishing a common organisation of agricultural markets and on specific provisions for certain agricultural products (Single CMO Regulation) (OJ L 299, 16.11.2007, p. 1).

• (5) 

  Commission Regulation (EEC) No 3427/87 of 16 November 1987 laying down detailed rules for intervention on the market in rice (OJ L 326, 17.11.1987, p. 25).

• (6) 

  Commission Regulation (EEC) No 2351/91 of 30 July 1991 laying down detailed rules applicable on the purchase of rice held by an intervention agency for the supply of food aid (OJ L 214, 2.8.1991, p. 51).

• (7) 

  Commission Regulation (EC) No 720/2008 of 25 July 2008 laying down common detailed rules for the application of Council Regulation (EC) No 1234/2007 as regards the storage and movement of products bought in by a paying agency or an intervention agency (OJ L 198, 26.7.2008, p. 17).

• (8) 

  Commission Regulation (EC) No 826/2008 of 20 August 2008 laying down common rules for the granting of private storage aid for certain agricultural products (OJ L 223, 21.8.2008, p. 3).

• (9) 

  Commission Regulation (EC) No 1130/2009 of 24 November 2009 laying down common detailed rules for verifying the use and/or destination of products from intervention (OJ L 310, 25.11.2009, p. 5).

• (10) 

  Commission Regulation (EU) No 1272/2009 of 11 December 2009 laying down common detailed rules for the implementation of Council Regulation (EC) No 1234/2007 as regards buying-in and selling of agricultural products under public intervention (OJ L 349, 29.12.2009, p. 1).

• (11) 

  Commission Delegated Regulation (EU) 2016/1238 of 18 May 2016 supplementing Regulation (EU) No 1308/2013 of the European Parliament and of the Council with regard to public intervention and aid for private storage (see page 15 of this Official Journal).

• (12) 

  Commission Delegated Regulation (EU) No 907/2014 of 11 March 2014 supplementing Regulation (EU) No 1306/2013 of the European Parliament and of the Council with regard to paying agencies and other bodies, financial management, clearance of accounts, securities and use of euro (OJ L 255, 28.8.2014, p. 18).

• (13) 

  Commission Implementing Regulation (EU) No 908/2014 of 6 August 2014 laying down rules for the application of Regulation (EU) No 1306/2013 of the European Parliament and of the Council with regard to paying agencies and other bodies, financial management, clearance of accounts, rules on checks, securities and transparency (OJ L 255, 28.8.2014, p. 59).

• (14) 

  Commission Regulation (EC) No 273/2008 of 5 March 2008 laying down detailed rules for the application of Council Regulation (EC) No 1255/1999 as regards methods for the analysis and quality evaluation of milk and milk products (OJ L 88, 29.3.2008, p. 1).

• (15) 

  Regulation (EC) No 1107/2009 of the European Parliament and of the Council of 21 October 2009 concerning the placing of plant protection products on the market and repealing Council Directives 79/117/EEC and 91/414/EEC (OJ L 309, 24.11.2009, p. 1).

• (16) 

  Commission Regulation (EC) No 1249/2008 of 10 December 2008 laying down detailed rules on the implementation of the Community scales for the classification of beef, pig and sheep carcases and the reporting of prices thereof (OJ L 337, 16.12.2008, p. 3).

• (17) 

  Commission Delegated Regulation (EU) No 906/2014 of 11 March 2014 supplementing Regulation (EU) No 1306/2013 of the European Parliament and of the Council with regard to public intervention expenditure (OJ L 255, 28.8.2014, p. 1).

• (18) 

  Council Regulation (EEC, Euratom) No 1182/71 of 3 June 1971 determining the rules applicable to periods, dates and time limits (OJ L 124, 8.6.1971, p. 1).

• (19) 

  Commission Regulation (EC) No 1848/2006 of 14 December 2006 concerning irregularities and the recovery of sums wrongly paid in connection with the financing of the common agricultural policy and the organisation of an information system in this field and repealing Council Regulation (EEC) No 595/91 (OJ L 355, 15.12.2006, p. 56).

• (20) 

  Commission Regulation (EC) No 792/2009 of 31 August 2009 laying down detailed rules for the Member States' notification to the Commission of information and documents in implementation of the common organisation of the markets, the direct payments' regime, the promotion of agricultural products and the regimes applicable to the outermost regions and the smaller Aegean islands (OJ L 228, 1.9.2009, p. 3).

ANNEX I

CEREALS

PART I

• 1. 

  DEFINITION OF MATTER OTHER THAN BASIC CEREALS OF UNIMPAIRED QUALITY

1.1.   Broken grains

For durum wheat, common wheat and barley, the definition of ‘broken grains’ is that contained in standard EN 15587.

For maize, the definition of ‘broken grains’ is that contained in standard EN 16378.

1.2.   Grain impurities

(a)   Shrivelled grains

For durum wheat, common wheat and barley, the definition of ‘shrivelled grains’ is that contained in standard EN 15587. However, for barley from Estonia, Latvia, Finland and Sweden, ‘shrivelled grains’ means grains with a specific weight of at least 64 kilograms per hectolitre offered or tendered for, or placed in, intervention in those Member States, grains which, after elimination of all other matter referred to in this Annex, pass through sieves with apertures of 2,0 mm.

‘Shrivelled grains’ does not apply to maize.

(b)   Other cereals

For durum wheat, common wheat and barley, the definition of ‘other cereals’ is that contained in standard EN 15587.

For maize, the definition of ‘other cereals’ is that contained in standard EN 16378.

(c)   Grains damaged by pests

For durum wheat, common wheat and barley, the definition of ‘grains damaged by pests’ is that contained in standard EN 15587.

For maize, the definition of ‘grains damaged by pests’ is that contained in standard EN 16378.

(d)   Grains in which the germ is discoloured

For durum wheat and common wheat, the definition is that contained in standard EN 15587.

‘Grains in which the germ is discoloured’ does not apply to barley or maize.

(e)   Grains overheated during drying

For durum wheat, common wheat and barley, the definition of ‘grains overheated during drying’ is that contained in standard EN 15587.

For maize, the definition of ‘grains overheated during drying’ is that contained in standard EN 16378..

(f)   Mottled grains

For durum wheat, the definition of ‘mottled grains’ is that contained in standard EN 15587.

‘Mottled grains’ does not apply to common wheat, barley or maize.

1.3.   Sprouted grains

For durum wheat, common wheat and barley, the definition of ‘sprouted grains’ is that contained in standard EN 15587.

For maize, the definition of ‘sprouted grains’ is that contained in standard EN 16378.

1.4.   Miscellaneous impurities

(a)   Extraneous seeds

For durum wheat, common wheat and barley, the definition of ‘extraneous seeds’ is that contained in standard EN 15587.

For maize, the definition of ‘extraneous seeds’ is that contained in standard EN 16378.

‘Noxious seeds’ means seeds which are toxic to humans and animals, seeds hampering or complicating the cleaning and milling of cereals and seeds affecting the quality of products processed from cereals.

(b)   Damaged grains

For durum wheat, common wheat and barley, the definition of ‘damaged grains’ is that contained in standard EN 15587.

For maize, the definition of ‘damaged grains’ is that contained in standard EN 16378.

In standard EN 15587, for durum wheat, common wheat and barley, the definition of ‘grains affected by fusariosis’ is included in that of ‘damaged grains’.

(c)   Extraneous matter

For durum wheat, common wheat and barley, the definition of ‘extraneous matter’ is that contained in standard EN 15587.

For maize, the definition of ‘extraneous matter’ is that contained in standard EN 16378.

(d)   Husks (cob fragments in the case of maize)

(e)   Ergots

(f)   Decayed grains

For durum wheat and common wheat, the definition of ‘decayed grains’ is that contained in standard EN 15587.

‘Decayed grains’ does not apply to barley or maize.

(g)   Impurities of animal origin.

1.5.   Live pests

1.6.   Mitadiné grains

Mitadiné grains of durum wheat are grains whose kernels cannot be regarded as entirely vitreous. They are defined in standard EN 15585.

• 2. 

  SPECIFIC FACTORS TO TAKE INTO CONSIDERATION FOR EACH TYPE OF CEREAL FOR THE DEFINITION OF IMPURITIES

2.1.   Durum wheat

‘Grain impurities’ means shrivelled grains, grains of other cereals, grains damaged by pests, grains in which the germ is discoloured, mottled grains and grains overheated during drying.

‘Miscellaneous impurities’ means extraneous seeds, damaged grains (including grains affected by fusariosis), extraneous matter, husks, ergot, decayed grains and impurities of animal origin.

2.2.   Common wheat

‘Grain impurities’ means shrivelled grains, grains of other cereals, grains damaged by pests, grains in which the germ is discoloured (only where the content exceeds 8 %) and grains overheated during drying.

‘Miscellaneous impurities’ means extraneous seeds, damaged grains (including grains affected by fusariosis), extraneous matter, husks, ergot, decayed grains and impurities of animal origin.

2.3.   Barley

‘Grain impurities’ means shrivelled grains, grains of other cereals, grains damaged by pests and grains overheated during drying.

‘Miscellaneous impurities’ means extraneous seeds, damaged grains (including grains affected by fusariosis), extraneous matter, husks and impurities of animal origin.

2.4.   Maize

‘Grain impurities’ means grains of other cereals, grains damaged by pests and grains overheated during drying.

‘Miscellaneous impurities’ means extraneous seeds, damaged grains, extraneous matter, cob fragments and impurities of animal origin.

PART II

Methods used for determining the quality of cereals offered or tendered for, or placed in, intervention

Pursuant to Article 4, the following methods are to be used to determine the quality of cereals offered or tendered for, or placed in, intervention:

PART III

Method for determining the non-stickiness and machinability of the dough obtained from common wheat

• 1. 

  Title

Method for test baking of wheat flour.

• 2. 

  Scope

The method is applicable to flour, experimentally milled from wheat for the production of yeast-raised bread.

• 3. 

  Principle

Dough is made from flour, water, yeast, salt and sucrose, in a specified mixer. After dividing and rounding, the pieces are given 30 minutes' rest; they are moulded, placed on baking sheets and baked after a final proof of fixed duration. Dough-handling properties are noted. The loaves are judged by volume and height.

• 4. 

  Ingredients

4.1.   Yeast

Active dry yeast of type Saccharomyces cerevisiae DHW-Hamburg-Wansbeck or a product having the same characteristics.

4.2.   Tap water

4.3.   Sugar-salt-ascorbic acid solution

Dissolve 30 ± 0,5 g of sodium chloride (commercial grade), 30 ± 0,5 g of sucrose (commercial grade), and 0,040 ± 0,001 g ascorbic acid in 800 ± 5 g of water. Prepare fresh daily.

4.4.   Sugar solution

Dissolve 5 ± 0,1 g sucrose (commercial grade) in 95 ± 1 g of water. Prepare fresh daily.

4.5.   Enzyme active malt flour

Commercial grade.

• 5. 

  Equipment and apparatus

5.1.   Baking room

Controlled to maintain a temperature of 22 to 25 °C.

5.2.   Refrigerator

For maintaining a temperature of 4 ± 2 °C.

5.3.   Balance

Maximum load 2 kg, accuracy 2 g.

5.4.   Balance

Maximum load 0,5 kg, accuracy 0,1 g.

5.5.   Analytical balance

Accuracy 0,1 × 10– 3 g.

5.6.   Mixer

Stephan UMTA 10, with mixing arm model ‘Detmold’ (Stephan Soehne GmbH) or similar equipment having the same characteristics.

5.7.   Proving cabinet

Controlled to maintain a temperature of 30 ± 1 °C.

5.8.   Open plastic boxes

Made from polymethylmethacrylate (Plexiglas, Perspex). Inside dimensions: 25 × 25 × 15 cm height, wall thickness 0,5 ± 0,05 cm.

5.9.   Square plastic sheets

Made from polymethylmethacrylate (Plexiglas, Perspex). At least 30 × 30 cm, thickness 0,5 ± 0,05 cm.

5.10.   Moulder

Brabender ball homogeniser (Brabender OHG) or similar equipment having the same characteristics.

• 6. 

  Sampling

According to standard EN ISO 24333.

• 7. 

  Procedure

7.1.   Determination of water uptake

Determine the water absorption according to ICC Standard No 115/1.

7.2.   Determination of malt flour addition

Determine the ‘falling number’ of the flour according to standard EN ISO 3093. If the ‘falling number’ is higher than 250, determine the malt flour addition required to bring it within the range 200 to 250, using a series of mixtures of the flour with increasing quantities of malt flour (point 4.5). If the ‘falling number’ is lower than 250, no malt flour is required.

7.3.   Reactivation of active dry yeast

Adjust the temperature of the sugar solution (point 4.4) to 35 ± 1 °C. Pour one part by weight of the active dry yeast into four parts by weight of this tempered sugar solution. Do not stir. Swirl if necessary.

Allow to stand for 10 ± 1 minute, then stir until a homogeneous suspension is obtained. Use this suspension within 10 minutes.

7.4.   Temperature adjustment of the flour and the dough liquid

The temperature of the flour and the water must be adjusted to give a dough temperature of 27 ± 1 °C after mixing.

7.5.   Dough composition

Weigh, with a precision of 2 g, 10 y/3 g flour on as-is moisture basis (corresponding to 1 kg flour on a 14 % moisture basis), in which ‘y’ is the quantity of flour used in the farinograph test (see ICC Standard No 115/1).

Weigh, with a precision of 0,2 g, the quantity of malt flour necessary to bring the ‘falling number’ within the range 200 to 250 (point 7.2).

Weigh 430 ± 5 g sugar-salt-ascorbic acid solution (point 4.3) and add water to a total mass of (x – 9) 10 y/3 g, (see point 10.2) in which ‘x’ is the quantity of water used in the farinograph test (see ICC Standard No 115/1). This total mass (usually between 450 and 650 g) must be achieved with a precision of 1,5 g.

Weigh 90 ± 1 g yeast suspension (point 7.3).

Note the total mass of the dough (P), which is the sum of the masses of flour, sugar-salt-ascorbic acid solution plus water, yeast suspension and malt flour.

7.6.   Mixing

Before starting, bring the mixer to a temperature of 27 ± 1 °C by use of a suitable quantity of tempered water.

Place the liquid dough ingredients in the mixer and place the flour plus malt flour on top.

Start the mixer (speed 1, 1 400 rev/min), and allow to run for 60 seconds. Twenty seconds after the start of mixing, turn the scraper attached to the lid of the mixing bowl two revolutions.

Measure the temperature of the dough. If it is outside the range 26 to 28 °C, discard the dough and mix a new one after adjustment of ingredient temperatures.

Note dough properties using one of the following terms:

To be considered ‘non-sticky and machinable’ at the end of mixing, the dough should form a coherent mass which hardly adheres to the sides of the bowl and spindle of the mixer. It should be possible to collect the dough by hand and remove it from the mixing bowl in a single motion without noticeable loss.

7.7.   Dividing and rounding

Weigh, with precision of 2 g, three pieces of dough according to the formula:

Immediately round the pieces for 15 seconds in the moulder (point 5.10) and place them for 30 ± 2 minutes on the square plastic sheets (point 5.9), covered by the inverted plastic boxes (point 5.8) in the proving cabinet (point 5.7).

Do not use dusting flour.

7.8.   Moulding

Bring the pieces of dough on the plastic sheets, covered by the inverted boxes, to the moulder (point 5.10), and re-round each piece for 15 seconds. Do not remove cover from a piece of dough until immediately before rounding. Note dough properties again, using one of the following terms:

To be considered as ‘non-sticky and machinable’ the dough should adhere hardly, or not at all, to the sides of the chamber so that it can freely rotate around itself and form a regular ball during the operation of the machine. At the end of the operation the dough should not stick to the sides of the dough-moulding chamber when the lid of the chamber is raised.

• 8. 

  Test report

The test report shall mention:

• 9. 

  General remarks

PART IV

Methodology of sampling and analyses for cereals

PART V

Price increases and reductions

Table I

Price increases for moisture content for cereals other than maize

Price increases for moisture content for maize

Table II

Price reductions for moisture content for cereals other than maize

Price reductions for moisture content for maize

Table III

Price increases for protein content of common wheat

Table IV

Price reductions for protein content for common wheat

PART VI

Calculation of prices increases and reductions

The price adjustments provided for in Article 26(1) shall be expressed in euro per tonne for offers or tenders for intervention by multiplying the price referred to in that Article by the sum of the established percentage increases or reductions, as follows:

• (1) 

  Commission Regulation (EC) No 1881/2006 of 19 December 2006 setting maximum levels for certain contaminants in foodstuffs (OJ L 364, 20.12.2006, p. 5).

• (2) 

  Commission Regulation (EC) No 401/2006 of 23 February 2006 laying down the methods of sampling and analysis for the official control of the levels of mycotoxins in foodstuffs (OJ L 70, 9.3.2006, p. 12).

• (3) 

  Commission Regulation (EU) No 234/2010 of 19 March 2010 laying down certain detailed rules for the application of Council Regulation (EC) No 1234/2007 on the granting of export refunds on cereals and the measures to be taken in the event of disturbance on the market for cereals (OJ L 72, 20.3.2010, p. 3).

• (4) 

  As % of dry matter.

• (5) 

  As % of dry matter.

ANNEX II

RICE

PART I

Methodology of sampling and analyses for paddy rice

PART II

Prices increases and reductions

Table I

Price increases for moisture content

Table II

Price reductions for moisture content

Table III

Price increases relating to milling yield

• (1) 

  To be applied where the milling yield of the rice differs from the basic milling yield for the variety concerned as set out in Part II of Annex II to Delegated Regulation (EU) 2016/1238.

ANNEX III

BEEF

PART I

Conditions and controls for taking over

PART II

Conversion coefficients

PART III

Deboning

• I. 

  General conditions governing deboning

II.   Contracts and specifications

III.   Control and monitoring of deboning operations

The paying agencies shall take all the necessary measures to ensure that deboning operations are carried out in compliance with the requirements of this Regulation and with the contracts and specifications described in Section II of this Part.

In particular, the paying agencies shall put in place a system to ensure the continuous monitoring and verification of all deboning operations. The outcome of such monitoring and verification shall be recorded.

IV.   Storage of cuts

Cuts shall be stored in cold stores located in the territory of the Member State exercising jurisdiction over the paying agency.

• V. 

  Costs of deboning operations

Contracts as referred to in Section II of this Part and payments made thereunder shall cover the costs of deboning operations as referred to in point 2 of Section I of this Part.

VI.   Time limits for deboning operations

Deboning, trimming, weighing, packaging and rapid freezing must be completed within 10 calendar days of slaughter. However, the paying agency may set shorter time limits.

VII.   Checks and rejection of products

PART IV

Specifications for intervention deboning

• 1. 

  HINDQUARTER CUTS

1.1.   Description of cuts

1.1.1.   Intervention shank (code INT 11)

Cutting and deboning: remove by a cut passing through the stifle joint and separating from the topside and the silverside by following the natural seam, leaving the heel muscle attached to the shank. Remove shank bones (tibia and hock).

Trimming: trim sinew tips back to the meat.

Wrapping and packing: these cuts must be individually wrapped before packing in cartons.

1.1.2.   Intervention thick flank (code INT 12)

Cutting and deboning: separate from the topside by a straight cut down to and along the line of the femur and from the silverside by continuing the cut down in the line of the natural seam; the cap must be left naturally attached.

Trimming: remove the patella, the joint capsule and tendon; the external fat cover must not exceed one centimetre at any point.

1.1.3.   Intervention topside (code INT 13)

Cutting and deboning: separate from the silverside and the shank by a cut following the line of the natural seam and detach from the femur; remove the aitchbone.

Trimming: remove the pizzle butt, the adjacent gristle and the scrotal (superficial inguinal) gland; remove the cartilage and connective tissues associated with the pelvic bone; the external fat cover must not exceed one centimetre at any point.

1.1.4.   Intervention silverside (code INT 14)

Cutting and deboning: separate from the topside and the shank by a cut following the line of the natural seam; remove the femur.

Trimming: remove the heavy cartilage adjacent to the bone joint, the popiteal lymph node, attached fat and tendon; the external fat cover must not exceed one centimetre at any point.

1.1.5.   Intervention fillet (code INT 15)

Cutting: remove entire length of fillet by freeing the head (butt end) from the hip bone (ilium) and by tracing along the fillet adjacent to the vertebrae, thereby freeing the fillet from the loin.

Trimming: remove gland and de-fat. Leave the silverskin and chain muscle intact and fully attached.

1.1.6.   Intervention rump (code INT 16)

Cutting and deboning: separate from the silverside/thick flank by a straight cut from a point approximately five centimetres from the posterior edge of the fifth sacral vertebra, passing approximately five centimetres from the anterior edge of the aitchbone, taking care not to cut through the thick flank.

Separate from the loin by a cut between the last lumbar and first sacral vertebrae, clearing the anterior edge of the pelvic bone. Remove bones and cartilage.

Trimming: remove the pocket of fat on the internal surface below the eye muscle. The external fat cover must not exceed one centimetre at any point.

1.1.7.   Intervention striploin (code INT 17)

Cutting and deboning: separate from the rump by a straight cut between the last lumbar and the first sacral vertebrae. Separate from the fore-rib (five bone) by a straight cut between the eleventh and tenth ribs. Remove the backbones cleanly. Remove the ribs and feather bones by sheeting out.

Trimming: remove any species of cartilage left after deboning. The tendon must be removed. The external fat cover must not exceed one centimetre at any point.

1.1.8.   Intervention flank (code INT 18)

Cutting and deboning: remove the full flank from the eight-rib straight-cut hindquarter by a cut from the point where the flank has been laid back, following the natural seam down around the surface of the hind muscles to a point which is horizontal to the middle of the last lumbar vertebra.

Continue the cut downwards in a straight line parallel to the fillet, through the thirteenth to the sixth rib inclusive along a line running parallel to the dorsal edge of the vertebral column, so that the entire downward cut is no more than five centimetres from the lateral tip of the eye muscle.

Remove all bones and cartilage by sheeting out. The whole flank must remain in one piece.

Trimming: remove the coarse connective tissue sheath covering the goose skirt, leaving the goose skirt intact. Trim fat so that the overall percentage of visible (external and interstitial) fat does not exceed 30 %.

1.1.9.   Intervention fore-rib (five bone) (code INT 19)

Cutting and deboning: this cut must be separated from the striploin by a straight cut between the eleventh and tenth ribs and must include the sixth to tenth ribs inclusive. Remove the intercostal muscles and pleura in a thin sheet with rib bones. Remove backbone and cartilage, including the tip of the scapula.

Trimming: remove the backstrap (ligamentum nuchae). The external fat cover must not exceed one centimetre at any point. The cap must be left attached.

• 2. 

  FOREQUARTER CUTS

2.1.   Description of cuts

2.1.1.   Intervention shin (code INT 21)

Cutting and deboning: remove by a cut around the joint separating the shinbone (radius) and clod-bone (humerus). Remove the shinbone (radius).

Trimming: trim sinew tips back to the meat.

Shins must not be packed with shanks.

2.1.2.   Intervention shoulder (code INT 22)

Cutting and deboning: separate the shoulder from the forequarter by cutting in a line following the natural seam around the edge of the shoulder and the cartilage at the tip of the scapula, continuing around the seam so that the shoulder is lifted from its natural pocket. Remove the scapula. The blade muscle under the scapula must be laid back but left attached so as to allow clean removal of the bone. Remove the clod-bone (humerus).

Trimming: remove cartilage, tendons and joint capsules; trim fat so that the overall percentage of visible (external and interstitial) fat does not exceed 10 %.

2.1.3.   Intervention brisket (code INT 23)

Cutting and deboning: separate from the forequarter by cutting in a straight line perpendicular to the middle of the first rib. Remove intercostal muscles and pleura by ‘sheeting out’, with ribs, breastbone and cartilage. Deckle to be left attached to the brisket. Fat underlying the deckle and the sternum must be removed.

Trimming: trim fat so that the overall percentage of visible (external and interstitial) fat does not exceed 30 %.

2.1.4.   Intervention forequarter (code INT 24)

Cutting and deboning: the cut remaining after removal of the brisket, shoulder and shin is classed as forequarter.

Remove rib bones by sheeting out. Neck bones must be removed cleanly.

The chain muscle must be left attached to this cut.

Trimming: tendons, joint capsules and cartilage to be removed. Trim fat so that the overall percentage of visible (external and interstitial) fat does not exceed 10 %.

PART V

Individual prices of rejected intervention cuts

• (1) 

  Regulation (EC) No 853/2004 of the European Parliament and of the Council of 29 April 2004 laying down specific hygiene rules for food of animal origin (OJ L 139, 30.4.2004, p. 55).

ANNEX IV

BUTTER

PART I

Sampling for chemical and microbiological analysis and sensory evaluation

• 1. 

  Chemical and microbiological analysis

Sampling for microbiological analysis must be carried out aseptically.

Up to five samples of 100 g may be combined into one sample for analysis after thorough mixing.

The samples must be taken randomly from different parts of each lot before or at the time of entry into the cold store designated by the paying agency.

Preparation of composite butter sample (chemical analysis):

Two samples per year per producer offering butter for intervention must be analysed for non-milk fat.

• 2. 

  Sensory evaluation

Following a trial storage period of 30 days, samples are to be taken randomly from different parts of each lot between the 30th and the 45th day following delivery of the butter and graded.

Each sample must be assessed individually in accordance with Annex IV to Regulation (EC) No 273/2008. No resampling or re-evaluation is allowed.

• 3. 

  Guidelines to be followed where samples show defects

PART II

Delivery and packaging of butter

ANNEX V

SKIMMED MILK POWDER

PART I

Sampling and analysis of skimmed-milk powder offered for intervention

PART II

Delivery and packaging of skimmed milk powder

This summary has been adopted from EUR-Lex.