Decision 2008/768 - Decision 768/2008/EC on a common framework for the marketing of products

Please note

This page contains a limited version of this dossier in the EU Monitor.

Contents

  1. Current status
  2. Key information
  3. Key dates
  4. Legislative text
  5. Original proposal
  6. Sources and disclaimer
  7. Full version
  8. EU Monitor

1.

Current status

This decision has been published on August 13, 2008 and entered into force on July  9, 2008.

2.

Key information

official title

Decision No 768/2008/EC of the European Parliament and of the Council of 9 July 2008 on a common framework for the marketing of products, and repealing Council Decision 93/465/EEC
 
Legal instrument Decision
Number legal act Decision 2008/768
Original proposal COM(2007)53 EN
CELEX number181 32008D0768

3.

Key dates

Document 09-07-2008
Publication in Official Journal 13-08-2008; OJ L 218, 13.8.2008,Special edition in Croatian: Chapter 15 Volume 012
Effect 09-07-2008; Entry into force Date of document
End of validity 31-12-9999

4.

Legislative text

13.8.2008   

EN

Official Journal of the European Union

L 218/82
 

DECISION No 768/2008/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL

of 9 July 2008

on a common framework for the marketing of products, and repealing Council Decision 93/465/EEC

(Text with EEA relevance)

THE EUROPEAN PARLIAMENT AND THE COUNCIL OF THE EUROPEAN UNION,

Having regard to the Treaty establishing the European Community, and in particular Article 95 thereof,

Having regard to the proposal from the Commission,

Having regard to the opinion of the European Economic and Social Committee (1),

After consulting the Committee of the Regions,

Acting in accordance with the procedure laid down in Article 251 of the Treaty (2),

Whereas:

 

(1)

On 7 May 2003 the Commission issued a Communication to the Council and the European Parliament entitled ‘Enhancing the Implementation of the New Approach Directives’. In its Resolution of 10 November 2003 (3), the Council acknowledged the importance of the New Approach as an appropriate and efficient regulatory model allowing technological innovation and enhancing the competitiveness of European industry, and confirmed the necessity of extending the application of its principles to new areas, while recognising the need for a clearer framework for conformity assessment, accreditation and market surveillance.
 

(2)

This Decision lays down common principles and reference provisions intended to apply across sectoral legislation in order to provide a coherent basis for revision or recasts of that legislation. This Decision therefore constitutes a general framework of a horizontal nature for future legislation harmonising the conditions for the marketing of products and a reference text for existing legislation.
 

(3)

This Decision provides, in the form of reference provisions, definitions and general obligations for economic operators and a range of conformity assessment procedures from which the legislator can select as appropriate. It also lays down rules for CE marking. Furthermore, reference provisions are provided as regards the requirements for conformity assessment bodies to be notified to the Commission as competent to carry out the relevant conformity assessment procedures and as regards the notification procedures. In addition, this Decision includes reference provisions concerning procedures for dealing with products presenting a risk in order to ensure the safety of the market place.
 

(4)

Whenever legislation is drawn up which concerns a product already subject to other Community acts, those acts must be taken into account to ensure the consistency of all legislation concerning the same product.
 

(5)

However, the specificities of sectoral needs may provide grounds for recourse to other regulatory solutions. In particular, that is the case where there are specific, comprehensive legal systems already in place in a sector, as for example in the fields of feed and food, cosmetic and tobacco products, common market organisations for agricultural products, plant health and plant protection, human blood and tissues, medicinal products for human and veterinary use and chemicals, or where sectoral needs require specific adaptation of the common principles and reference provisions, as for example in the fields of medical devices, construction products and marine equipment. Such adaptations may also be related to the modules set out in Annex II.
 

(6)

Whenever legislation is drawn up, the legislator may depart, totally or partially, from the common principles and reference provisions laid down in this Decision on account of the specificities of the sector concerned. Any such departure should be justified.
 

(7)

Although the incorporation of the provisions of this Decision in future legislative acts cannot be required by law, the co-legislators adopting this...


More

This text has been adopted from EUR-Lex.

5.

Original proposal

 

6.

Sources and disclaimer

For further information you may want to consult the following sources that have been used to compile this dossier:

This dossier is compiled each night drawing from aforementioned sources through automated processes. We have invested a great deal in optimising the programming underlying these processes. However, we cannot guarantee the sources we draw our information from nor the resulting dossier are without fault.

 

7.

Full version

This page is also available in a full version containing the summary of legislation, the legal context, de Europese rechtsgrond, other dossiers related to the dossier at hand, the related cases of the European Court of Justice and finally consultations relevant to the dossier at hand.

The full version is available for registered users of the EU Monitor by ANP and PDC Informatie Architectuur.

8.

EU Monitor

The EU Monitor enables its users to keep track of the European process of lawmaking, focusing on the relevant dossiers. It automatically signals developments in your chosen topics of interest. Apologies to unregistered users, we can no longer add new users.This service will discontinue in the near future.

  • 1. 
    OJ C , , p. .

     
  • 2. 
    OJ C , , p. .

     
  • 3. 
    OJ C , , p. .

     
  • 4. 
    OJ C , , p. .

     
  • 5. 
    OJ L 31, 1.2.2002, p. 1. Regulation as last amended by Commission Regulation (EC) No 575/2006 (OJ L 100, 8.4.2006, p. 3).

     
  • 6. 
    OJ L 165, 30.4.2004; corrected version in OJ L 191, 28.5.2004, p. 1.

     
  • 7. 
    OJ L 194, 18:07:2001; p. 26.

     
  • 8. 
    OJ L 311, 28.11.2001, p. 1.

     
  • 9. 
    OJ L 311, 28.11.2001, p. 67.

     
  • 10. 
    OJ L 033, 8.2.2003, p. 30.

     
  • 11. 
    OJ.L.102, 7.4.2004, p.48.

     
  • 12. 
    OJ L 136, 30.4.2004, p. 1.

     
  • 13. 
    OJ L 204, 21.7.1998, p. 37. Directive as last amended by the 2003 Act of Accession.

     
  • 14. 
    OJ L 220, 30.8.1993, p. 23.

     
  • 15. 
    OJ L 31, 1.2.2002, p. 1. Regulation as last amended by Commission Regulation (EC) No 575/2006 (OJ L 100, 8.4.2006, p. 3).

     
  • 16. 
    OJ L 31, 1.2.2002, p. 1. Regulation as last amended by Commission Regulation (EC) No 575/2006 (OJ L 100, 8.4.2006, p. 3).

     
  • 17. 
    OJ L 194, 18:07:2001; p. 26.

     
  • 18. 
    OJ L 194, 18:07:2001; p. 26.

     
  • 19. 
    The content of the technical documentation must be laid down in the specific legislative instrument in accordance with the products concerned.

     
  • 20. 
    The choice may be limited by the specific legislative instrument.

     
  • 21. 
    The choice may be limited by the specific legislative instrument.

     
  • 22. 
    OJ C , , p. .

     
  • 23. 
    OJ L 31, 1.2.2002, p. 1. Regulation as last amended by Commission Regulation (EC) No 575/2006 (OJ L 100, 8.4.2006, p. 3).

     
  • 24. 
    The specific legislative instruments may alter this period.

     
  • 25. 
    The content of the technical documentation shall be laid down in the specific legislative instrument in accordance with the products concerned.For example, the documentation must contain so far as relevant for assessment:- a general description of the product,- conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,- descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,- a list of the harmonised standards the references of which have been published in the OJEU, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements of the directive where these harmonised standards have not been applied,- results of design calculations made, examinations carried out, etc.,- test reports.

     
  • 26. 
    The content of the technical documentation shall be laid down in the specific legislative instrument in accordance with the products concerned.For example, the documentation must contain so far as relevant for assessment:- a general description of the product,- conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,- descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,- a list of the harmonised standards the references of which have been published in the OJEU, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements of the directive where these harmonised standards have not been applied,- results of design calculations made, examinations carried out, etc.,- test reports.

     
  • 27. 
    The specific legislative instruments may alter this period.

     
  • 28. 
    The content of the technical documentation shall be laid down in the specific legislative instrument in accordance with the products concerned.For example, the documentation must contain so far as relevant for assessment:- a general description of the product,- conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,- descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,- a list of the harmonised standards the references of which have been published in the OJEU, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements of the directive where these harmonised standards have not been applied,- results of design calculations made, examinations carried out, etc.,- test reports.

     
  • 29. 
    The legislative instrument must specify the products concerned and the tests to be carried out

     
  • 30. 
    The choice may be limited by the specific legislative instrument

     
  • 31. 
    The specific legislative instruments may alter this period.

     
  • 32. 
    The content of the technical documentation shall be laid down in the specific legislative instrument in accordance with the products concerned.For example, the documentation must contain so far as relevant for assessment:- a general description of the product,- conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,- descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,- a list of the harmonised standards the references of which have been published in the OJEU, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements of the directive where these harmonised standards have not been applied,- results of design calculations made, examinations carried out, etc.,- test reports.

     
  • 33. 
    The choice may be limited by the specific legislative instrument.

     
  • 34. 
    The specific legislative instruments may alter this period.

     
  • 35. 
    The content of the technical documentation must be laid down in the specific legislative instrument in accordance with the products concerned.

     
  • 36. 
    The specific legislative instruments may provide for the certificate to have a period of validity.

     
  • 37. 
    The specific legislative instruments may provide for different arrangements.

     
  • 38. 
    The specific legislative instruments may alter this period.

     
  • 39. 
    The specific legislative instruments may alter this period.

     
  • 40. 
    The specific legislative instruments may alter this period.

     
  • 41. 
    The legislative instrument must specify the products concerned and the tests to be carried out.

     
  • 42. 
    The specific legislative instruments may alter this period.

     
  • 43. 
    The choice may be milited by the specific legislative insturment.

     
  • 44. 
    The specific legislative instruments may alter this period.

     
  • 45. 
    In the specific legislative instruments, the frequency may be specified.

     
  • 46. 
    The specific legislative instruments may alter this period.

     
  • 47. 
    The specific legislative instruments may alter this period.

     
  • 48. 
    The specific legislative instruments may provide for different arrangements.

     
  • 49. 
    The content of the technical documentation shall be laid down in the specific legislative instrument in accordance with the products concerned.For example, the documentation must contain so far as relevant for assessment:- a general description of the product,- conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,- descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,- a list of the harmonised standards the references of which have been published in the OJEU, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements of the directive where these harmonised standards have not been applied,- results of design calculations made, examinations carried out, etc.,- test reports.

     
  • 50. 
    The specific legislative instruments may alter this period.

     
  • 51. 
    In the specific legislative instruments, the frequency may be specified.

     
  • 52. 
    The specific legislative instruments may alter this period.

     
  • 53. 
    The specific legislative instruments may alter this period.

     
  • 54. 
    The specific legislative instruments may provide for different arrangements.

     
  • 55. 
    In the specific legislative instruments, the frequency may be specified.

     
  • 56. 
    The specific legislative instruments may alter this period.

     
  • 57. 
    The specific legislative instruments may alter this period.

     
  • 58. 
    The specific legislative instruments may provide for different arrangements.

     
  • 59. 
    The content of the technical documentation shall be laid down in the specific legislative instrument in accordance with the products concerned.For example, the documentation must contain so far as relevant for assessment:- a general description of the product,- conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,- descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,- a list of the harmonised standards the references of which have been published in the OJEU, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements of the directive where these harmonised standards have not been applied,- results of design calculations made, examinations carried out, etc.,- test reports.

     
  • 60. 
    The specific legislative instruments may alter this period.

     
  • 61. 
    In the specific legislative instruments, the frequency may be specified.

     
  • 62. 
    The specific legislative instruments may alter this period.

     
  • 63. 
    The specific legislative instruments may alter this period.

     
  • 64. 
    The specific legislative instruments may provide for different arrangements.

     
  • 65. 
    The manufacturer's discretion may be limited in the specific legislative instrument.

     
  • 66. 
    The specific legislative instruments may alter this period.

     
  • 67. 
    The specific legislative instruments may alter this period.

     
  • 68. 
    The specific legislative instruments may alter this period.

     
  • 69. 
    The content of the technical documentation shall be laid down in the specific legislative instrument in accordance with the products concerned.For example, the documentation must contain so far as relevant for assessment:- a general description of the product,- conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,- descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,- a list of the harmonised standards the references of which have been published in the OJEU, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements of the directive where these harmonised standards have not been applied,- results of design calculations made, examinations carried out, etc.,- test reports.

     
  • 70. 
    The specific legislative instruments may alter this period.

     
  • 71. 
    The specific legislative instruments may alter this period.

     
  • 72. 
    The specific legislative instrument may alter this period.

     
  • 73. 
    The specific legislative instruments may alter this period.

     
  • 74. 
    The content of the technical documentation shall be laid down in the specific legislative instrument in accordance with the products concerned.For example, the documentation must contain so far as relevant for assessment:- a general description of the product,- conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,- descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,- a list of the harmonised standards the references of which have been published in the OJEU, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements of the directive where these harmonised standards have not been applied,- results of design calculations made, examinations carried out, etc.,- test reports.

     
  • 75. 
    The specific legislative instruments may alter this period.

     
  • 76. 
    The specific legislative instruments may alter this period.

     
  • 77. 
    The specific legislative instruments may alter this period.

     
  • 78. 
    In the specific legislative instruments, the frequency may be specified.

     
  • 79. 
    The specific legislative instruments may alter this period.

     
  • 80. 
    The specific legislative instruments may alter this period.

     
  • 81. 
    The specific legislative instruments may provide for different arrangements.

     
  • 82. 
    The specific legislative instruments may provide for different arrangements.

     
  • 83. 
    The specific legislative instruments may provide for the certificate to have a period of validity.

     
  • 84. 
    The specific legislative instruments may provide for different arrangements.

     
  • 85. 
    The specific legislative instruments may alter this period.

     
  • 86. 
    The specific legislative instruments may alter this period.

     
  • 87. 
    In the specific legislative instruments, the frequency may be
     
  • 88. 
    The specific legislative instruments may alter this period.

     
  • 89. 
    and (6)
     
  • 90. 
    and (6)
     
  • 91. 
    to (6)
     
  • 92. 
    and (4)
     
  • 93. 
    OJ C , , p. .

     
  • 94. 
    OJ C , , p. .

     
  • 95. 
    OJ C , , p. .

     
  • 96. 
    OJ C , , p. .

     
  • 97. 
    OJ L 31, 1.2.2002, p. 1. Regulation as last amended by Commission Regulation (EC) No 575/2006 (OJ L 100, 8.4.2006, p.

    3).

     
  • 98. 
    OJ L 165, 30.4.2004; corrected version in OJ L 191, 28.5.2004, p. 1.

     
  • 99. 
    OJ L 194, 18:07:2001; p. 26.

     
  • 100. 
    OJ L 311, 28.11.2001, p. 1.

     
  • 101. 
    OJ L 311, 28.11.2001, p. 67.

     
  • 102. 
    OJ L 033, 8.2.2003, p. 30.

     
  • 103. 
    OJ.L.102, 7.4.2004, p.48.

     
  • 104. 
    OJ L 136, 30.4.2004, p. 1.

     
  • 105. 
    OJ L 204, 21.7.1998, p. 37. Directive as last amended by the 2003 Act of Accession.

     
  • 106. 
    OJ L 220, 30.8.1993, p. 23.

     
  • 107. 
    OJ L 31, 1.2.2002, p. 1. Regulation as last amended by Commission Regulation (EC) No 575/2006 (OJ L 100, 8.4.2006, p.

    3).

     
  • 108. 
    OJ L 31, 1.2.2002, p. 1. Regulation as last amended by Commission Regulation (EC) No 575/2006 (OJ L 100, 8.4.2006, p.

    3).

     
  • 109. 
    OJ L 194, 18:07:2001; p. 26.

     
  • 110. 
    OJ L 194, 18:07:2001; p. 26.

     
  • 111. 
    The content of the technical documentation must be laid down in the specific legislative instrument in accordance with the products concerned.

     
  • 112. 
    The choice may be limited by the specific legislative instrument.

     
  • 113. 
    The choice may be limited by the specific legislative instrument.

     
  • 114. 
    OJ C , , p. .

     
  • 115. 
    OJ L 31, 1.2.2002, p. 1. Regulation as last amended by Commission Regulation (EC) No 575/2006 (OJ L 100, 8.4.2006, p.

    3).

     
  • 116. 
    The specific legislative instruments may alter this period.

     
  • 117. 
    The content of the technical documentation shall be laid down in the specific legislative instrument in accordance with the products concerned.For example, the documentation must contain so far as relevant for assessment:- a general description of the product,- conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,- descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,- a list of the harmonised standards the references of which have been published in the OJEU, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements of the directive where these harmonised standards have not been applied,- results of design calculations made, examinations carried out, etc.,- test reports.

     
  • 118. 
    The content of the technical documentation shall be laid down in the specific legislative instrument in accordance with the products concerned.For example, the documentation must contain so far as relevant for assessment:- a general description of the product,- conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,- descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,- a list of the harmonised standards the references of which have been published in the OJEU, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements of the directive where these harmonised standards have not been applied,- results of design calculations made, examinations carried out, etc.,- test reports.

     
  • 119. 
    The specific legislative instruments may alter this period.

     
  • 120. 
    The content of the technical documentation shall be laid down in the specific legislative instrument in accordance with the products concerned.For example, the documentation must contain so far as relevant for assessment:- a general description of the product,- conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,- descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,- a list of the harmonised standards the references of which have been published in the OJEU, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements of the directive where these harmonised standards have not been applied,- results of design calculations made, examinations carried out, etc.,- test reports.

     
  • 121. 
    The legislative instrument must specify the products concerned and the tests to be carried out

     
  • 122. 
    The choice may be limited by the specific legislative instrument

     
  • 123. 
    The specific legislative instruments may alter this period.

     
  • 124. 
    The content of the technical documentation shall be laid down in the specific legislative instrument in accordance with the products concerned.For example, the documentation must contain so far as relevant for assessment:- a general description of the product,- conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,- descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,- a list of the harmonised standards the references of which have been published in the OJEU, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements of the directive where these harmonised standards have not been applied,- results of design calculations made, examinations carried out, etc.,- test reports.

     
  • 125. 
    The choice may be limited by the specific legislative instrument.

     
  • 126. 
    The specific legislative instruments may alter this period.

     
  • 127. 
    The content of the technical documentation must be laid down in the specific legislative instrument in accordance with the products concerned.

     
  • 128. 
    The specific legislative instruments may provide for the certificate to have a period of validity.

     
  • 129. 
    The specific legislative instruments may provide for different arrangements.

     
  • 130. 
    The specific legislative instruments may alter this period.

     
  • 131. 
    The specific legislative instruments may alter this period.

     
  • 132. 
    The specific legislative instruments may alter this period.

     
  • 133. 
    The legislative instrument must specify the products concerned and the tests to be carried out.

     
  • 134. 
    The specific legislative instruments may alter this period.

     
  • 135. 
    The choice may be milited by the specific legislative insturment.

     
  • 136. 
    The specific legislative instruments may alter this period.

     
  • 137. 
    In the specific legislative instruments, the frequency may be specified.

     
  • 138. 
    The specific legislative instruments may alter this period.

     
  • 139. 
    The specific legislative instruments may alter this period.

     
  • 140. 
    The specific legislative instruments may provide for different arrangements.

     
  • 141. 
    The content of the technical documentation shall be laid down in the specific legislative instrument in accordance with the products concerned.For example, the documentation must contain so far as relevant for assessment:- a general description of the product,- conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,- descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,- a list of the harmonised standards the references of which have been published in the OJEU, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements of the directive where these harmonised standards have not been applied,- results of design calculations made, examinations carried out, etc.,- test reports.

     
  • 142. 
    The specific legislative instruments may alter this period.

     
  • 143. 
    In the specific legislative instruments, the frequency may be specified.

     
  • 144. 
    The specific legislative instruments may alter this period.

     
  • 145. 
    The specific legislative instruments may alter this period.

     
  • 146. 
    The specific legislative instruments may provide for different arrangements.

     
  • 147. 
    In the specific legislative instruments, the frequency may be specified.

     
  • 148. 
    The specific legislative instruments may alter this period.

     
  • 149. 
    The specific legislative instruments may alter this period.

     
  • 150. 
    The specific legislative instruments may provide for different arrangements.

     
  • 151. 
    The content of the technical documentation shall be laid down in the specific legislative instrument in accordance with the products concerned.For example, the documentation must contain so far as relevant for assessment:- a general description of the product,- conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,- descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,- a list of the harmonised standards the references of which have been published in the OJEU, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements of the directive where these harmonised standards have not been applied,- results of design calculations made, examinations carried out, etc.,- test reports.

     
  • 152. 
    The specific legislative instruments may alter this period.

     
  • 153. 
    In the specific legislative instruments, the frequency may be specified.

     
  • 154. 
    The specific legislative instruments may alter this period.

     
  • 155. 
    The specific legislative instruments may alter this period.

     
  • 156. 
    The specific legislative instruments may provide for different arrangements.

     
  • 157. 
    The manufacturer's discretion may be limited in the specific legislative instrument.

     
  • 158. 
    The specific legislative instruments may alter this period.

     
  • 159. 
    The specific legislative instruments may alter this period.

     
  • 160. 
    The specific legislative instruments may alter this period.

     
  • 161. 
    The content of the technical documentation shall be laid down in the specific legislative instrument in accordance with the products concerned.For example, the documentation must contain so far as relevant for assessment:- a general description of the product,- conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,- descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,- a list of the harmonised standards the references of which have been published in the OJEU, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements of the directive where these harmonised standards have not been applied,- results of design calculations made, examinations carried out, etc.,- test reports.

     
  • 162. 
    The specific legislative instruments may alter this period.

     
  • 163. 
    The specific legislative instruments may alter this period.

     
  • 164. 
    The specific legislative instrument may alter this period.

     
  • 165. 
    The specific legislative instruments may alter this period.

     
  • 166. 
    The content of the technical documentation shall be laid down in the specific legislative instrument in accordance with the products concerned.For example, the documentation must contain so far as relevant for assessment:- a general description of the product,- conceptual design and manufacturing drawings and schemes of components, sub-assemblies, circuits, etc.,- descriptions and explanations necessary for the understanding of said drawings and schemes and the operation of the product,- a list of the harmonised standards the references of which have been published in the OJEU, applied in full or in part, and descriptions of the solutions adopted to meet the essential requirements of the directive where these harmonised standards have not been applied,- results of design calculations made, examinations carried out, etc.,- test reports.

     
  • 167. 
    The specific legislative instruments may alter this period.

     
  • 168. 
    The specific legislative instruments may alter this period.

     
  • 169. 
    The specific legislative instruments may alter this period.

     
  • 170. 
    In the specific legislative instruments, the frequency may be specified.

     
  • 171. 
    The specific legislative instruments may alter this period.

     
  • 172. 
    The specific legislative instruments may alter this period.

     
  • 173. 
    The specific legislative instruments may provide for different arrangements.

     
  • 174. 
    The specific legislative instruments may provide for different arrangements.

     
  • 175. 
    The specific legislative instruments may provide for the certificate to have a period of validity.

     
  • 176. 
    The specific legislative instruments may provide for different arrangements.

     
  • 177. 
    The specific legislative instruments may alter this period.

     
  • 178. 
    The specific legislative instruments may alter this period.

     
  • 179. 
    In the specific legislative instruments, the frequency may be
     
  • 180. 
    The specific legislative instruments may alter this period.

     
  • 181. 
    Deze databank van de Europese Unie biedt de mogelijkheid de actuele werkzaamheden (workflow) van de Europese instellingen (Europees Parlement, Raad, ESC, Comité van de Regio's, Europese Centrale Bank, Hof van Justitie enz.) te volgen. EURlex volgt alle voorstellen (zoals wetgevende en begrotingsdossiers) en mededelingen van de Commissie, vanaf het moment dat ze aan de Raad of het Europees Parlement worden voorgelegd.
     
  • 182. 
    EUR-lex provides an overview of the proposal, amendments, citations and legality.