Directive 2011/17 - Repeal of Council Directives 71/317/EEC, 71/347/EEC, 71/349/EEC, 74/148/EEC, 75/33/EEC, 76/765/EEC, 76/766/EEC and 86/217/EEC regarding metrology - Main contents
Please note
This page contains a limited version of this dossier in the EU Monitor.
Contents
official title
Directive 2011/17/EU of the European Parliament and of the Council of 9 March 2011 repealing Council Directives 71/317/EEC, 71/347/EEC, 71/349/EEC, 74/148/EEC, 75/33/EEC, 76/765/EEC, 76/766/EEC and 86/217/EEC regarding metrology Text with EEA relevanceLegal instrument | Directive |
---|---|
Number legal act | Directive 2011/17 |
Original proposal | COM(2008)801 ![]() |
CELEX number i | 32011L0017 |
Document | 09-03-2011 |
---|---|
Publication in Official Journal | 18-03-2011; OJ L 71, 18.3.2011,Special edition in Croatian: Chapter 13 Volume 059 |
Effect | 07-04-2011; Entry into force Date pub. +20 See Art 7 |
End of validity | 31-12-9999 |
Transposition | 30-06-2011; At the latest See Art 5.1 30-11-2015; At the latest See Art 5.2 |
18.3.2011 |
EN |
Official Journal of the European Union |
L 71/1 |
DIRECTIVE 2011/17/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 9 March 2011
repealing Council Directives 71/317/EEC, 71/347/EEC, 71/349/EEC, 74/148/EEC, 75/33/EEC, 76/765/EEC, 76/766/EEC and 86/217/EEC regarding metrology
(Text with EEA relevance)
THE EUROPEAN PARLIAMENT AND THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union, and in particular Article 114 thereof,
Having regard to the proposal from the European Commission,
Having regard to the opinion of the European Economic and Social Committee (1),
Acting in accordance with the ordinary legislative procedure (2),
Whereas:
(1) |
Union policies on better regulation stress the importance of simplification of national and Union legislation as a crucial element in improving the competitiveness of enterprises and achieving the objectives of the Lisbon Agenda. |
(2) |
A number of measuring instruments are covered by specific Directives adopted on the basis of Council Directive 71/316/EEC of 26 July 1971 on the approximation of the laws of the Member States relating to common provisions for both measuring instruments and methods of metrological control (3), which was recast by Directive 2009/34/EC of the European Parliament and of the Council of 23 April 2009 relating to common provisions for both measuring instruments and methods of metrological control (4). |
(3) |
Council Directives 71/317/EEC of 26 July 1971 on the approximation of the laws of the Member States relating to 5 to 50 kilogramme medium accuracy rectangular bar weights and 1 to 10 kilogramme medium accuracy cylindrical weights (5), 71/347/EEC of 12 October 1971 on the approximation of the laws of the Member States relating to the measuring of the standard mass per storage volume of grain (6), 71/349/EEC of 12 October 1971 on the approximation of the laws of the Member States relating to the calibration of the tanks of vessels (7), 74/148/EEC of 4 March 1974 on the approximation of the laws of the Member States relating to weights of from 1 mg to 50 kg of above-medium accuracy (8), 75/33/EEC of 17 December 1974 on the approximation of the laws of the Member States relating to cold-water meters (9), 76/765/EEC of 27 July 1976 on the approximation of the laws of the Member States relating to alcoholometers and alcohol hydrometers (10), 86/217/EEC of 26 May 1986 on the approximation of the laws of the Member States relating to tyre pressure gauges for motor vehicles (11), adopted on the basis of Directive 71/316/EEC, are technically outdated, do not reflect the state of the art in measurement technology or concern instruments which are not subject to technological development and which are increasingly less in use. Furthermore, national provisions are allowed to exist alongside Union provisions. |
(4) |
While Council Directive 76/766/EEC of 27 July 1976 on the approximation of the laws of the Member States relating to alcohol tables (12) provides for a total harmonisation, most of its content is included in the Union regulations on alcohol measurement of wines and spirit drinks, namely Commission Regulation (EEC) No 2676/90 of 17 September 1990 determining Community methods for the analysis of wines (13) and Commission Regulation (EC) No 2870/2000 of 19 December 2000 laying down Community reference methods for the analysis of spirit drinks (14). The international standards for alcohol tables are identical to those provided for in Directive 76/766/EEC and they can continue to be the basis for national regulation. |
(5) |
Technical progress and innovation with regard to measuring instruments covered by the Directives being repealed will be ensured in practice either by the voluntary application of the international and European standards which have been... |
More
This text has been adopted from EUR-Lex.
This dossier is compiled each night drawing from aforementioned sources through automated processes. We have invested a great deal in optimising the programming underlying these processes. However, we cannot guarantee the sources we draw our information from nor the resulting dossier are without fault.
This page is also available in a full version containing the legal context, de Europese rechtsgrond, other dossiers related to the dossier at hand and the related cases of the European Court of Justice.
The full version is available for registered users of the EU Monitor by ANP and PDC Informatie Architectuur.
The EU Monitor enables its users to keep track of the European process of lawmaking, focusing on the relevant dossiers. It automatically signals developments in your chosen topics of interest. Apologies to unregistered users, we can no longer add new users.This service will discontinue in the near future.