Regulation 2011/333 - Criteria determining when certain types of scrap metal cease to be waste under Directive 2008/98/EC - Main contents
Please note
This page contains a limited version of this dossier in the EU Monitor.
Contents
official title
Council Regulation (EU) No 333/2011 of 31 March 2011 establishing criteria determining when certain types of scrap metal cease to be waste under Directive 2008/98/EC of the European Parliament and of the CouncilLegal instrument | Regulation |
---|---|
Number legal act | Regulation 2011/333 |
Original proposal | COM(2010)576 ![]() |
CELEX number i | 32011R0333 |
Document | 31-03-2011 |
---|---|
Publication in Official Journal | 08-04-2011; Special edition in Croatian: Chapter 15 Volume 013,OJ L 94, 8.4.2011 |
Effect | 28-04-2011; Entry into force Date pub. +20 See Art 7 09-10-2011; Application See Art 7 |
End of validity | 31-12-9999 |
8.4.2011 |
EN |
Official Journal of the European Union |
L 94/2 |
COUNCIL REGULATION (EU) No 333/2011
of 31 March 2011
establishing criteria determining when certain types of scrap metal cease to be waste under Directive 2008/98/EC of the European Parliament and of the Council
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to the Treaty on the Functioning of the European Union,
Having regard to Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste and repealing certain Directives (1) and in particular Article 6(2) thereof,
Having regard to the proposal from the European Commission,
After submission of the proposed measures to the European Parliament,
Whereas:
(1) |
It results from an evaluation of several waste streams that recycling markets for scrap metal would benefit from the development of specific criteria determining when scrap metal obtained from waste ceases to be waste. Those criteria should ensure a high level of environmental protection. They should be without prejudice to the classification of scrap metal as waste by third countries. |
(2) |
Reports of the Joint Research Centre of the European Commission have shown that a market and demand exist for iron, steel and aluminium scrap to be used as feedstock in steel works, foundries, aluminium refiners and remelters for the production of metals. Iron, steel and aluminium scrap should therefore be sufficiently pure and meet the relevant scrap standards or specifications required by the metal producing industry. |
(3) |
The criteria determining when iron, steel and aluminium scrap cease to be waste should ensure that iron, steel and aluminium scrap resulting from a recovery operation meet the technical requirements of the metal producing industry, comply with existing legislation and standards applicable to products and do not lead to overall adverse environmental or human health impacts. Reports of the Joint Research Centre of the European Commission have shown that the proposed criteria on the waste used as input in the recovery operation, on the treatment processes and techniques, as well as on the scrap metal resulting from the recovery operation, fulfil those objectives since they should result in the production of iron, steel and aluminium scrap devoid of hazardous properties and sufficiently free of non-metallic compounds. |
(4) |
In order to ensure compliance with the criteria, it is appropriate to provide that information on scrap metal which has ceased to be waste is issued and that a quality management system is implemented. |
(5) |
A review of the criteria may prove necessary if, on the basis of a monitoring of the development of market conditions for iron and steel scrap and aluminium scrap, adverse effects on recycling markets for iron and steel scrap and aluminium scrap are noted, in particular with regard to the availability of, and access to, such scrap. |
(6) |
In order to allow operators to adapt to the criteria determining when scrap metal ceases to be waste, it is appropriate to provide for a reasonable period to elapse before this Regulation applies. |
(7) |
The Committee established by Article 39(1) of Directive 2008/98/EC has not delivered an opinion on the measures provided for in this Regulation and the Commission therefore submitted to the Council a proposal relating to the measures and forwarded it to the European Parliament. |
(8) |
The European Parliament has not opposed the proposed measures, |
HAS ADOPTED THIS REGULATION:
Article 1
Subject matter
This Regulation establishes criteria determining when iron, steel and aluminium scrap, including aluminium alloy scrap, cease to be waste.
Article 2
Definitions
For the purposes of this Regulation, the definitions set out in...
More
This text has been adopted from EUR-Lex.
This dossier is compiled each night drawing from aforementioned sources through automated processes. We have invested a great deal in optimising the programming underlying these processes. However, we cannot guarantee the sources we draw our information from nor the resulting dossier are without fault.
This page is also available in a full version containing the legal context, de Europese rechtsgrond, other dossiers related to the dossier at hand and the related cases of the European Court of Justice.
The full version is available for registered users of the EU Monitor by ANP and PDC Informatie Architectuur.
The EU Monitor enables its users to keep track of the European process of lawmaking, focusing on the relevant dossiers. It automatically signals developments in your chosen topics of interest. Apologies to unregistered users, we can no longer add new users.This service will discontinue in the near future.