Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE) (recast) Text with EEA relevance - Main contents

EN

Official Journal of the European Union

L 197/38

A number of substantial changes are to be made to Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on waste electrical and electronic equipment (WEEE) (4). In the interests of clarity, that Directive should be recast.

The objectives of the Union’s environment policy are, in particular, to preserve, protect and improve the quality of the environment, to protect human health and to utilise natural resources prudently and rationally. That policy is based on the precautionary principle and the principles that preventive action should be taken, that environmental damage should, as a priority, be rectified at source and that the polluter should pay.

The Community programme of policy and action in relation to the environment and sustainable development (Fifth Environmental Action Programme) (5) stated that the achievement of sustainable development calls for significant changes in current patterns of development, production, consumption and behaviour and advocates, inter alia, the reduction of wasteful consumption of natural resources and the prevention of pollution. It mentioned waste electrical and electronic equipment (WEEE) as one of the target areas to be regulated, in view of the application of the principles of prevention, recovery and safe disposal of waste.

This Directive supplements the general waste management legislation of the Union, such as Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste (6). It refers to the definitions in that Directive, including the definitions of waste and general waste management operations. The definition of collection in Directive 2008/98/EC includes the preliminary sorting and preliminary storage of waste for the purposes of transport to a waste treatment facility. Directive 2009/125/EC of the European Parliament and of the Council (7) establishes a framework for setting ecodesign requirements for energy-related products and enables the adoption of specific ecodesign requirements for energy-related products which may also be covered by this Directive. Directive 2009/125/EC and the implementing measures adopted pursuant thereto are without prejudice to the waste management legislation of the Union. Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (8) requires the substitution of banned substances in respect of all electrical and electronic equipment (EEE) within its scope.

As the market continues to expand and innovation cycles become even shorter, the replacement of equipment accelerates, making EEE a fast-growing source of waste. While Directive 2002/95/EC has contributed effectively to reducing hazardous substances contained in new EEE, hazardous substances such as mercury, cadmium, lead, hexavalent chromium and polychlorinated biphenyls (PCBs) and ozone-depleting substances will still be present in WEEE for many years. The content of hazardous components in EEE is a major concern during the waste management phase, and recycling of WEEE is not undertaken to a sufficient extent. A lack of recycling results in the loss of valuable resources.

The purpose of this Directive is to contribute to sustainable production and consumption by, as a first priority, the prevention of WEEE and, in addition, by the re-use, recycling and other forms of recovery of such wastes so as to reduce the disposal of waste and to contribute to the efficient use of resources and the retrieval of valuable secondary raw materials. It also seeks to improve the environmental performance of all operators involved in the life cycle of EEE, e.g. producers, distributors and consumers and, in particular, those operators directly involved in the collection and treatment of WEEE. In particular, different national applications of the ‘producer responsibility’ principle may lead to substantial disparities in the financial burden on economic operators. Having different national policies on the management of WEEE hampers the effectiveness of recycling policies. For that reason, the essential criteria should be laid down at the level of the Union and minimum standards for the treatment of WEEE should be developed.

The provisions of this Directive should apply to products and producers irrespective of selling technique, including distance and electronic selling. In this connection, the obligations of producers and distributors using distance and electronic selling channels should, as far as is practicable, take the same form, and should be enforced in the same way, as for other distribution channels, in order to avoid those other distribution channels having to bear the costs resulting from this Directive arising from WEEE for which the equipment was sold by distance or electronic selling.

In order to fulfil the obligations pursuant to this Directive in a given Member State, a producer should be established in that Member State. By exception, to reduce existing barriers to the proper functioning of the internal market and administrative burdens, Member States should allow producers that are not established on their territory, but that are established in another Member State, to appoint an authorised representative to be responsible for fulfilling the obligations of that producer under this Directive. In addition, administrative burdens should be reduced by simplifying registration and reporting procedures and by ensuring that duplicate charges are not levied for registrations within individual Member States.

This Directive should cover all EEE used by consumers and EEE intended for professional use. This Directive should apply without prejudice to Union legislation on safety and health requirements protecting all actors in contact with WEEE, as well as specific Union waste management legislation, in particular Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators and waste batteries and accumulators (9), and Union product design legislation, in particular Directive 2009/125/EC. The preparing for re-use, recovery and recycling of waste cooling equipment and the substances, mixtures or components thereof should be in accordance with the relevant legislation of the Union, in particular Regulation (EC) No 1005/2009 of the European Parliament and of the Council of 16 September 2009 on substances that deplete the ozone layer (10) and Regulation (EC) No 842/2006 of the European Parliament and of the Council of 17 May 2006 on certain fluorinated greenhouse gases (11). The objectives of this Directive can be achieved without including large-scale fixed installations such as oil platforms, airport luggage transport systems or elevators within its scope. However, any equipment which is not specifically designed and installed as part of those installations, and which can fulfil its function even if it is not part of those installations, should be included in the scope of this Directive. This refers for instance to equipment such as lighting equipment or photovoltaic panels.

A number of definitions should be included in this Directive in order to specify its scope. However, in the framework of a revision of the scope, the definition of EEE should be further clarified in order to bring Member States’ relevant national measures and current, applied and established practices closer together.

Ecodesign requirements facilitating the re-use, dismantling and recovery of WEEE should be laid down in the framework of measures implementing Directive 2009/125/EC. In order to optimise re-use and recovery through product design, the whole life cycle of the product should be taken into account.

The establishment, by this Directive, of producer responsibility is one of the means of encouraging design and production of EEE which take into full account and facilitate its repair, possible upgrading, re-use, disassembly and recycling.

In order to guarantee the safety and health of distributors’ personnel involved in the take-back and handling of WEEE, Member States should, in accordance with national and Union legislation on safety and health requirements, determine the conditions under which take-back may be refused by distributors.

Separate collection is a precondition for ensuring specific treatment and recycling of WEEE and is necessary to achieve the chosen level of protection of human health and the environment in the Union. Consumers have to actively contribute to the success of such collection and should be encouraged to return WEEE. For this purpose, convenient facilities should be set up for the return of WEEE, including public collection points, where private households should be able to return their waste at least free of charge. Distributors have an important role in contributing to the success of WEEE collection. Therefore, collection points set up at retail shops for very small WEEE should not be subject to the registration or permit requirements of Directive 2008/98/EC.

In order to attain the chosen level of protection and the harmonised environmental objectives of the Union, Member States should adopt appropriate measures to minimise the disposal of WEEE as unsorted municipal waste and to achieve a high level of separate collection of WEEE. In order to ensure that Member States strive to set up efficient collection schemes, they should be required to achieve a high level of collection of WEEE, particularly for cooling and freezing equipment containing ozone-depleting substances and fluorinated greenhouse gases, given their high environmental impact and in view of the obligations contained in Regulation (EC) No 842/2006 and Regulation (EC) No 1005/2009. Data included in the impact assessment carried out by the Commission in 2008 show that 65 % of the EEE placed on the market was already separately collected then, but more than half of this was potentially the object of improper treatment and illegal exports, and, even when properly treated, this was not reported. This leads to losses of valuable secondary raw materials, environmental degradation, and provision of inconsistent data. To avoid this, it is necessary to set an ambitious collection target and to ensure that WEEE collected is treated in an environmentally sound way and is correctly reported. It is appropriate to lay down minimum requirements for shipments of used EEE suspected to be WEEE, in the application of which Member States may have regard to any relevant Correspondents’ Guidelines elaborated in the context of the implementation of Regulation (EC) No 1013/2006 of the European Parliament and of the Council of 14 June 2006 on shipments of waste (12). Such minimum requirements should in any case have the purpose of avoiding unwanted shipments of non-functional EEE to developing countries.

The setting of ambitious collection targets should be based on the amount of WEEE generated where due account is taken of the differing life cycles of products in the Member States, of non-saturated markets and of EEE with a long life cycle. Therefore, a methodology for calculating collection rates based on WEEE generated should be developed in the near future. According to current estimates, a collection rate of 85 % of WEEE generated is broadly equivalent to a collection rate of 65 % of the average weight of EEE placed on the market in the three preceding years.

Specific treatment for WEEE is indispensable in order to avoid the dispersion of pollutants in recycled material or the waste stream. Such treatment is the most effective means of ensuring compliance with the chosen level of protection of the environment of the Union. Any establishment or undertaking carrying out collection, recycling and treatment operations should comply with minimum standards to prevent negative environmental impacts associated with the treatment of WEEE. The best available treatment, recovery and recycling techniques should be used, provided that they ensure human health and a high level of environmental protection. Best available treatment, recovery and recycling techniques may be further defined in accordance with the procedures of Directive 2008/1/EC of the European Parliament and of the Council of 15 January 2008 concerning integrated pollution prevention and control (13).

The Scientific Committee on Emerging and Newly Identified Health Risks, in its opinion on ‘Risk Assessment of Products of Nanotechnology’ of 19 January 2009, stated that exposure to nanomaterials that are firmly embedded in large structures, for example in electronic circuits, may occur in the waste phase and during recycling. To control possible risks to human health and the environment from the treatment of WEEE that contains nanomaterials, it is appropriate for the Commission to assess whether specific treatment may be necessary.

The collection, storage, transport, treatment and recycling of WEEE as well as its preparation for re-use shall be conducted with an approach geared to protecting the environment and human health and preserving raw materials and shall aim at recycling valuable resources contained in EEE with a view to ensuring a better supply of commodities within the Union.

Where appropriate, priority should be given to preparing for re-use of WEEE and its components, sub-assemblies and consumables. Where this is not preferable, all WEEE collected separately should be sent for recovery, in the course of which a high level of recycling and recovery should be achieved. In addition, producers should be encouraged to integrate recycled material in new equipment.

The recovery, preparation for re-use and recycling of WEEE should be counted towards the achievement of the targets laid down in this Directive only if that recovery, preparation for re-use or recycling does not conflict with other Union or national legislation applicable to the equipment. Ensuring proper preparation for re-use, recycling and recovery of WEEE is important for sound resource management and will optimise supply of resources.

Basic principles with regard to the financing of WEEE management have to be set at the level of the Union, and financing schemes have to contribute to high collection rates, as well as to the implementation of the principle of producer responsibility.

Users of EEE from private households should have the possibility of returning WEEE at least free of charge. Producers should finance at least the collection from collection facilities, and the treatment, recovery and disposal of WEEE. Member States should encourage producers to take full responsibility for the WEEE collection, in particular by financing the collection of WEEE throughout the entire waste chain, including from private households, in order to avoid separately collected WEEE becoming the object of suboptimal treatment and illegal exports, to create a level playing field by harmonising producer financing across the Union and to shift payment for the collection of this waste from general tax payers to the consumers of EEE, in line with the ‘polluter pays’ principle. In order to give maximum effect to the concept of producer responsibility, each producer should be responsible for financing the management of the waste from his own products. The producer should be able to choose to fulfil this obligation either individually or by joining a collective scheme. Each producer should, when placing a product on the market, provide a financial guarantee to prevent costs for the management of WEEE from orphan products from falling on society or the remaining producers. The responsibility for the financing of the management of historical waste should be shared by all existing producers through collective financing schemes to which all producers that exist on the market when the costs occur contribute proportionately. Collective financing schemes should not have the effect of excluding niche and low-volume producers, importers and new entrants. Collective schemes could provide for differentiated fees based on how easily products and the valuable secondary raw materials that they contain could be recycled. In the case of products which have a long life cycle and which are now covered by this Directive, such as photovoltaic panels, the best possible use should be made of existing collection and recovery systems, provided that they meet the requirements laid down in this Directive.

Producers could be allowed to show purchasers, on a voluntary basis at the time of sale of new products, the costs of collecting, treating and disposing of WEEE in an environmentally sound way. This is in line with the Commission Communication on Sustainable Consumption and Production and Sustainable Industrial Policy Action Plan, in particular with regard to smarter consumption and green public procurement.

Information to users about the requirement not to dispose of WEEE as unsorted municipal waste and to collect WEEE separately and about the collection systems and their role in the management of WEEE is indispensable for the success of WEEE collection. Such information necessitates the proper marking of EEE which could end up in rubbish bins or similar means of municipal waste collection.

Information on component and material identification to be provided by producers is important to facilitate the management, and in particular the treatment and recovery or recycling, of WEEE.

Member States should ensure that inspection and monitoring infrastructure enables the proper implementation of this Directive to be verified, having regard, inter alia, to Recommendation 2001/331/EC of the European Parliament and of the Council of 4 April 2001 providing for minimum criteria for environmental inspections in the Member States (14).

Member States should provide for effective, proportionate and dissuasive penalties to be imposed on natural and legal persons responsible for waste management, where they infringe the provisions of this Directive. Member States should also be able to take action to recover the costs of non-compliance and remedial measures, without prejudice to Directive 2004/35/EC of the European Parliament and of the Council of 21 April 2004 on environmental liability with regard to the prevention and remedying of environmental damage (15).

Information about the weight of EEE placed on the market in the Union and the rates of collection, preparation for re-use, including as far as possible preparation for re-use of whole appliances, recovery or recycling and export of WEEE collected in accordance with this Directive is necessary to monitor the achievement of the objectives of this Directive. For the purposes of calculating collection rates, a common methodology for the calculation of weight of EEE should be developed to ascertain, inter alia, whether this term includes the actual weight of the entire equipment in the form in which it is marketed, including all components, sub-assemblies, accessories and consumables but excluding packaging, batteries, instructions for use and manuals.

It is appropriate to allow Member States to choose to implement certain provisions of this Directive by means of agreements between the competent authorities and the economic sectors concerned, provided that particular requirements are met.

In order to address difficulties faced by Member States in achieving the collection rates, to take into account technical and scientific progress and to supplement the provisions on fulfilment of recovery targets, the power to adopt acts in accordance with Article 290 of the Treaty on the Functioning of the European Union (TFEU) should be delegated to the Commission in respect of transitional adjustments for certain Member States, adaptation to technical and scientific progress and the adoption of detailed rules on WEEE exported out of the Union counting towards the fulfilment of recovery targets. It is of particular importance that the Commission carry out appropriate consultations during its preparatory work, including at expert level. The Commission, when preparing and drawing up delegated acts, should ensure a simultaneous, timely and appropriate transmission of relevant documents to the European Parliament and to the Council.

In order to ensure uniform conditions for the implementation of this Directive, implementing powers should be conferred on the Commission. Those powers should be exercised in accordance with Regulation (EU) No 182/2011 of the European Parliament and of the Council of 16 February 2011 laying down the rules and general principles concerning mechanisms for control by Member States of the Commission’s exercise of implementing powers (16).

The obligation to transpose this Directive into national law should be confined to those provisions which represent a substantive change as compared with the earlier Directives. The obligation to transpose the provisions which are unchanged arises under the earlier Directives.

In accordance with the Joint Political Declaration of 28 September 2011 of Member States and the Commission on explanatory documents (17), Member States have undertaken to accompany, in justified cases, the notification of their transposition measures with one or more documents explaining the relationship between the components of a directive and the corresponding parts of national transposition instruments. With regard to this Directive, the legislator considers the transmission of such documents to be justified.

This Directive should be without prejudice to the obligations of the Member States relating to the time limits for transposition into national law and application of the Directives set out in Annex XI, Part B.

Since the objective of this Directive cannot be sufficiently achieved by the Member States and can therefore, by reason of the scale of the problem, be better achieved at the level of the Union, the Union may adopt measures, in accordance with the principle of subsidiarity as set out in Article 5 of the Treaty on European Union. In accordance with the principle of proportionality, as set out in that Article, this Directive does not go beyond what is necessary in order to achieve that objective,

from 13 August 2012 to 14 August 2018 (transitional period), subject to paragraph 3, to EEE falling within the categories set out in Annex I. Annex II contains an indicative list of EEE which falls within the categories set out in Annex I;

from 15 August 2018, subject to paragraphs 3 and 4, to all EEE. All EEE shall be classified within the categories set out in Annex III. Annex IV contains a non-exhaustive list of EEE which falls within the categories set out in Annex III (open scope).

equipment which is necessary for the protection of the essential interests of the security of Member States, including arms, munitions and war material intended for specifically military purposes;

equipment which is specifically designed and installed as part of another type of equipment that is excluded from or does not fall within the scope of this Directive, which can fulfil its function only if it is part of that equipment;

filament bulbs.

equipment designed to be sent into space;

large-scale stationary industrial tools;

large-scale fixed installations, except any equipment which is not specifically designed and installed as part of those installations;

means of transport for persons or goods, excluding electric two-wheel vehicles which are not type-approved;

non-road mobile machinery made available exclusively for professional use;

equipment specifically designed solely for the purposes of research and development that is only made available on a business-to-business basis;

medical devices and in vitro diagnostic medical devices, where such devices are expected to be infective prior to end of life, and active implantable medical devices.

‘electrical and electronic equipment’ or ‘EEE’ means equipment which is dependent on electric currents or electromagnetic fields in order to work properly and equipment for the generation, transfer and measurement of such currents and fields and designed for use with a voltage rating not exceeding 1 000 volts for alternating current and 1 500 volts for direct current;

‘large-scale stationary industrial tools’ means a large size assembly of machines, equipment, and/or components, functioning together for a specific application, permanently installed and de-installed by professionals at a given place, and used and maintained by professionals in an industrial manufacturing facility or research and development facility;

‘large-scale fixed installation’ means a large-size combination of several types of apparatus and, where applicable, other devices, which:

‘non-road mobile machinery’ means machinery, with on-board power source, the operation of which requires either mobility or continuous or semi-continuous movement between a succession of fixed working locations while working;

‘waste electrical and electronic equipment’ or ‘WEEE’ means electrical or electronic equipment which is waste within the meaning of Article 3(1) of Directive 2008/98/EC, including all components, sub-assemblies and consumables which are part of the product at the time of discarding;

‘producer’ means any natural or legal person who, irrespective of the selling technique used, including distance communication within the meaning of Directive 97/7/EC of the European Parliament and of the Council of 20 May 1997 on the protection of consumers in respect of distance contracts (19):

Whoever exclusively provides financing under or pursuant to any finance agreement shall not be deemed to be a ‘producer’ unless he also acts as a producer within the meaning of points (i) to (iv);

‘distributor’ means any natural or legal person in the supply chain, who makes an EEE available on the market. This definition does not prevent a distributor from being, at the same time, a producer within the meaning of point (f);

‘WEEE from private households’ means WEEE which comes from private households and WEEE which comes from commercial, industrial, institutional and other sources which, because of its nature and quantity, is similar to that from private households. Waste from EEE likely to be used by both private households and users other than private households shall in any event be considered to be WEEE from private households;

‘finance agreement’ means any loan, lease, hiring or deferred sale agreement or arrangement relating to any equipment whether or not the terms of that agreement or arrangement or any collateral agreement or arrangement provide that a transfer of ownership of that equipment will or may take place;

‘making available on the market’ means any supply of a product for distribution, consumption or use on the market of a Member State in the course of a commercial activity, whether in return for payment or free of charge;

‘placing on the market’ means the first making available of a product on the market within the territory of a Member State on a professional basis;

‘removal’ means manual, mechanical, chemical or metallurgic handling with the result that hazardous substances, mixtures and components are contained in an identifiable stream or are an identifiable part of a stream within the treatment process. A substance, mixture or component is identifiable if it can be monitored to verify environmentally safe treatment;

‘medical device’ means a medical device or accessory within the meaning of, respectively, point (a) or (b) of Article 1(2) of Council Directive 93/42/EEC of 14 June 1993 concerning medical devices (20) which is EEE;

‘in vitro diagnostic medical device’ means an in vitro diagnostic device or accessory within the meaning of, respectively, point (b) or (c) of Article 1(2) of Directive 98/79/EC of the European Parliament and of the Council of 27 October 1998 on in vitro diagnostic medical devices (21) which is EEE;

‘active implantable medical device’ means an active implantable medical device within the meaning of point (c) of Article 1(2) of Council Directive 90/385/EEC of 20 June 1990 on the approximation of the laws of the Member States relating to active implantable medical devices (22) which is EEE.

systems are set up allowing final holders and distributors to return such waste at least free of charge. Member States shall ensure the availability and accessibility of the necessary collection facilities, taking into account, in particular, the population density;

when supplying a new product, distributors are responsible for ensuring that such waste can be returned to the distributor at least free of charge on a one-to-one basis as long as the equipment is of equivalent type and has fulfilled the same functions as the supplied equipment. Member States may derogate from this provision provided that they ensure that returning the WEEE is not thereby made more difficult for the final holder and that it remains free of charge for the final holder. Member States making use of this derogation shall inform the Commission thereof;

distributors provide for the collection, at retail shops with sales areas relating to EEE of at least 400 m2, or in their immediate proximity, of very small WEEE (no external dimension more than 25 cm) free of charge to end-users and with no obligation to buy EEE of an equivalent type, unless an assessment shows that alternative existing collection schemes are likely to be at least as effective. Such assessments shall be available to the public. WEEE collected shall be properly treated in accordance with Article 8;

without prejudice to points (a), (b) and (c), producers are allowed to set up and to operate individual and/or collective take-back systems for WEEE from private households provided that these are in line with the objectives of this Directive;

having regard to national and Union health and safety standards, WEEE that presents a health and safety risk to personnel because of contamination may be refused for return under points (a), (b) and (c). Member States shall make specific arrangements for such WEEE.

received by collection and treatment facilities;

received by distributors;

separately collected by producers or third parties acting on their behalf.

achieve, from 14 August 2016, a collection rate that is lower than 45 % but higher than 40 % of the average weight of EEE placed on the market in the three preceding years; and

postpone the achievement of the collection rate referred to in the second subparagraph of paragraph 1 until a date of their own choice which shall not be later than 14 August 2021.

the requirement not to dispose of WEEE as unsorted municipal waste and to collect such WEEE separately;

the return and collection systems available to them, encouraging the coordination of information on the available collection points irrespective of the producers or other operators which have set them up;

their role in contributing to re-use, recycling and other forms of recovery of WEEE;

the potential effects on the environment and human health as a result of the presence of hazardous substances in EEE;

the meaning of the symbol shown in Annex IX.

each producer, or each authorised representative where appointed under Article 17, is registered as required and has the possibility of entering online in their national register all relevant information reflecting that producer’s activities in that Member State;

upon registering, each producer, or each authorised representative where appointed under Article 17, provides the information set out in Annex X, Part A, undertaking to update it as appropriate;

each producer, or each authorised representative where appointed under Article 17, provides the information set out in Annex X, Part B;

national registers provide links to other national registers on their website to facilitate, in all Member States, registration of producers or, where appointed under Article 17, authorised representatives.

information reported in the framework of the register of producers;

shipments, in particular exports of WEEE outside the Union in compliance with Regulation (EC) No 1013/2006 and Regulation (EC) No 1418/2007; and

the operations at treatment facilities in accordance with Directive 2008/98/EC and Annex VII of this Directive.

agreements shall be enforceable;

agreements shall specify objectives with the corresponding deadlines;

agreements shall be published in the national official journal or an official document equally accessible to the public and transmitted to the Commission;

the results achieved shall be monitored regularly, reported to the competent authorities and the Commission and made available to the public under the conditions set out in the agreement;

the competent authorities shall ensure that the progress achieved under the agreement is examined;

in the case of non-compliance with the agreement, Member States must implement the relevant provisions of this Directive by legislative, regulatory or administrative measures.

Large household appliances

Small household appliances

IT and telecommunications equipment

Consumer equipment and photovoltaic panels

Lighting equipment

Electrical and electronic tools (with the exception of large-scale stationary industrial tools)

Toys, leisure and sports equipment

Medical devices (with the exception of all implanted and infected products)

Monitoring and control instruments

Automatic dispensers

Large cooling appliances

Refrigerators

Freezers

Other large appliances used for refrigeration, conservation and storage of food

Washing machines

Clothes dryers

Dish washing machines

Cookers

Electric stoves

Electric hot plates

Microwaves

Other large appliances used for cooking and other processing of food

Electric heating appliances

Electric radiators

Other large appliances for heating rooms, beds, seating furniture

Electric fans

Air conditioner appliances

Other fanning, exhaust ventilation and conditioning equipment

Vacuum cleaners

Carpet sweepers

Other appliances for cleaning

Appliances used for sewing, knitting, weaving and other processing for textiles

Irons and other appliances for ironing, mangling and other care of clothing

Toasters

Fryers

Grinders, coffee machines and equipment for opening or sealing containers or packages

Electric knives

Appliances for hair cutting, hair drying, tooth brushing, shaving, massage and other body care appliances

Clocks, watches and equipment for the purpose of measuring, indicating or registering time

Scales

Centralised data processing:

Personal computing:

Radio sets

Television sets

Video cameras

Video recorders

Hi-fi recorders

Audio amplifiers

Musical instruments

and other products or equipment for the purpose of recording or reproducing sound or images, including signals or other technologies for the distribution of sound and image than by telecommunications

Photovoltaic panels

Luminaires for fluorescent lamps with the exception of luminaires in households

Straight fluorescent lamps

Compact fluorescent lamps

High intensity discharge lamps, including pressure sodium lamps and metal halide lamps

Low pressure sodium lamps

Other lighting or equipment for the purpose of spreading or controlling light with the exception of filament bulbs

Drills

Saws

Sewing machines

Equipment for turning, milling, sanding, grinding, sawing, cutting, shearing, drilling, making holes, punching, folding, bending or similar processing of wood, metal and other materials

Tools for riveting, nailing or screwing or removing rivets, nails, screws or similar uses

Tools for welding, soldering or similar use

Equipment for spraying, spreading, dispersing or other treatment of liquid or gaseous substances by other means

Tools for mowing or other gardening activities

Electric trains or car racing sets

Hand-held video game consoles

Video games

Computers for biking, diving, running, rowing, etc.

Sports equipment with electric or electronic components

Coin slot machines

Radiotherapy equipment

Cardiology equipment

Dialysis equipment

Pulmonary ventilators

Nuclear medicine equipment

Laboratory equipment for in vitro diagnosis

Analysers

Freezers

Fertilization tests

Other appliances for detecting, preventing, monitoring, treating, alleviating illness, injury or disability

Smoke detector

Heating regulators

Thermostats

Measuring, weighing or adjusting appliances for household or as laboratory equipment

Other monitoring and control instruments used in industrial installations (e.g. in control panels)

Automatic dispensers for hot drinks

Automatic dispensers for hot or cold bottles or cans

Automatic dispensers for solid products

Automatic dispensers for money

All appliances which deliver automatically all kinds of products

Temperature exchange equipment

Screens, monitors, and equipment containing screens having a surface greater than 100 cm2

Lamps

Large equipment (any external dimension more than 50 cm) including, but not limited to:

Household appliances; IT and telecommunication equipment; consumer equipment; luminaires; equipment reproducing sound or images, musical equipment; electrical and electronic tools; toys, leisure and sports equipment; medical devices; monitoring and control instruments; automatic dispensers; equipment for the generation of electric currents. This category does not include equipment included in categories 1 to 3.

Small equipment (no external dimension more than 50 cm) including, but not limited to:

Household appliances; consumer equipment; luminaires; equipment reproducing sound or images, musical equipment; electrical and electronic tools; toys, leisure and sports equipment; medical devices; monitoring and control instruments; automatic dispensers; equipment for the generation of electric currents. This category does not include equipment included in categories 1 to 3 and 6.

Small IT and telecommunication equipment (no external dimension more than 50 cm)

for WEEE falling within category 1 or 10 of Annex I,

for WEEE falling within category 3 or 4 of Annex I,

for WEEE falling within category 2, 5, 6, 7, 8 or 9 of Annex I,

for gas discharge lamps, 80 % shall be recycled.

for WEEE falling within category 1 or 10 of Annex I,

for WEEE falling within category 3 or 4 of Annex I,

for WEEE falling within category 2, 5, 6, 7, 8 or 9 of Annex I,

for gas discharge lamps, 80 % shall be recycled.

for WEEE falling within category 1 or 4 of Annex III,

for WEEE falling within category 2 of Annex III,

for WEEE falling within category 5 or 6 of Annex III,

for WEEE falling within category 3 of Annex III, 80 % shall be recycled.

In order to distinguish between EEE and WEEE, where the holder of the object claims that he intends to ship or is shipping used EEE and not WEEE, Member States shall require the holder to have available the following to substantiate this claim:

By way of derogation, point 1(a) and (b) and point 3 do not apply where it is documented by conclusive proof that the shipment is taking place in the framework of a business-to-business transfer agreement and that:

In order to demonstrate that the items being shipped constitute used EEE rather than WEEE, Member States shall require the following steps for testing and record keeping for used EEE to be carried out:

In addition to the documentation requested in points 1, 2 and 3, every load (e.g. shipping container, lorry) of used EEE shall be accompanied by:

In the absence of proof that an object is used EEE and not WEEE through the appropriate documentation required in points 1, 2, 3 and 4 and of appropriate protection against damage during transportation, loading and unloading in particular through sufficient packaging and appropriate stacking of the load, which are the obligations of the holder who arranges the transport, Member State authorities shall consider that an item is WEEE and presume that the load comprises an illegal shipment. In these circumstances the load will be dealt with in accordance with Articles 24 and 25 of Regulation (EC) No 1013/2006.

As a minimum the following substances, mixtures and components have to be removed from any separately collected WEEE:

These substances, mixtures and components shall be disposed of or recovered in compliance with Directive 2008/98/EC.

The following components of WEEE that is separately collected have to be treated as indicated:

Taking into account environmental considerations and the desirability of preparation for re-use and recycling, points 1 and 2 shall be applied in such a way that environmentally-sound preparation for re-use and recycling of components or whole appliances is not hindered.

Sites for storage (including temporary storage) of WEEE prior to its treatment (without prejudice to the requirements of Council Directive 1999/31/EC of 26 April 1999 on the landfill of waste (1)):

Sites for treatment of WEEE:

Name and address of the producer or of the authorised representative where appointed under Article 17 (postal code and location, street name and number, country, telephone and fax number, e-mail, as well as a contact person). In the case of an authorised representative as defined in Article 17, also the contact details of the producer that is represented.

National identification code of the producer, including European tax number or national tax number of the producer.

Category of EEE set out in Annex I or III, as appropriate.

Type of EEE (household or other than household equipment).

Brand name of EEE.

Information on how the producer meets its responsibilities: individual or collective scheme, including information on financial guarantee.

Selling technique used (e.g. distance selling).

Declaration stating that the information provided is true.

National identification code of the producer.

Reporting period.

Category of EEE set out in Annex I or III, as appropriate.

Quantity of EEE placed on the national market, by weight.

Quantity, by weight, of waste of EEE separately collected, recycled (including prepared for re-use), recovered and disposed of within the Member State or shipped within or outside the Union.